Federica Lodesani
Federica Lodesani has a total of 28 co-authors. Here are the top co-authors by number of shared publications:
- Shingo Urata
Innovative Technology Laboratories AGC Inc. Yokohama Kanagawa Japan
8 shared publications - Alfonso Pedone
University of Modena and Reggio Emilia image/svg+xml
4 shared publications A. Le Gac
Univ Montpellier, DE2D, ISEC, CEA,DES,Marcoule, F-30207 Bagnols Sur Ceze, France
2 shared publicationsF. Angeli
Univ Montpellier, DE2D, ISEC, CEA,DES,Marcoule, F-30207 Bagnols Sur Ceze, France
2 shared publications- Jincheng Du
University of North Texas
2 shared publications Maria Cristina Menziani
Department of Chemical and Geological Sciences University of Modena and Reggio Emilia Modena Italy
2 shared publications
Latest Publications
- 19 November 2026
- Published by Elsevier in Acta Materialia
From anisotropy to shrinkage: Origin of recoverability in mixed-alkali metaphosphate glasses
- 19 November 2026
- Published by Elsevier in Acta Materialia
From anisotropy to shrinkage: Origin of recoverability in mixed-alkali metaphosphate glasses
- 25 February 2026
- Published by Elsevier in Applied Surface Science
- Vol. 731
Glass-water interaction and corrosion of binary sodium phosphate glasses from reactive molecular dynamics simulations
- 25 February 2026
- Published by Elsevier in Applied Surface Science
- Vol. 731
Glass-water interaction and corrosion of binary sodium phosphate glasses from reactive molecular dynamics simulations
- 23 October 2025
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 109 (1)
Structures of sodium aluminophosphate glasses from molecular dynamics simulations and experimental validation
Modeling phosphate glasses presents significant challenges due to their intermediate‐range structural complexity. This study focuses on developing a classical potential to model sodium aluminophosphate glasses, incorporating a three‐body term to the existing effective two body potentials using molecular dynamics (MD) simulations with improved structural accuracy. The three‐body term parameters were initially parameterized by fitting to density functional theory (DFT)‐relaxed crystalline phosphates and subsequently refined by modeling binary and ternary phosphate glasses. The potential's performance was assessed by modeling six ternary sodium aluminophosphate glasses, three of which were prepared and characterized experimentally. Computational results were validated against Raman spectroscopy and 27 Al and 31 P magic‐angle spinning (MAS) NMR experimental data and compared to those from previous studies. Incorporating the three‐body potential was found to notably improved the Al coordination number, aligning more closely with NMR results, although there is still a gap between computational and experimental results, specifically for P‐rich glasses. Additionally, the three‐body term enhanced the regulation of intertetrahedral bond angles toward experimental values, with additional improvements in bond distances and Q n distribution. These findings demonstrate the capability of MD simulations in elucidating the complex atomic level structures of phosphate glasses. The results provided insinghts on the short and medium range structures of these glasses and highlight the importance of three‐body interactions in modeling phosphate and aluminophosphate glasses.
- 23 October 2025
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 109 (1)
Structures of sodium aluminophosphate glasses from molecular dynamics simulations and experimental validation
Modeling phosphate glasses presents significant challenges due to their intermediate‐range structural complexity. This study focuses on developing a classical potential to model sodium aluminophosphate glasses, incorporating a three‐body term to the existing effective two body potentials using molecular dynamics (MD) simulations with improved structural accuracy. The three‐body term parameters were initially parameterized by fitting to density functional theory (DFT)‐relaxed crystalline phosphates and subsequently refined by modeling binary and ternary phosphate glasses. The potential's performance was assessed by modeling six ternary sodium aluminophosphate glasses, three of which were prepared and characterized experimentally. Computational results were validated against Raman spectroscopy and 27 Al and 31 P magic‐angle spinning (MAS) NMR experimental data and compared to those from previous studies. Incorporating the three‐body potential was found to notably improved the Al coordination number, aligning more closely with NMR results, although there is still a gap between computational and experimental results, specifically for P‐rich glasses. Additionally, the three‐body term enhanced the regulation of intertetrahedral bond angles toward experimental values, with additional improvements in bond distances and Q n distribution. These findings demonstrate the capability of MD simulations in elucidating the complex atomic level structures of phosphate glasses. The results provided insinghts on the short and medium range structures of these glasses and highlight the importance of three‐body interactions in modeling phosphate and aluminophosphate glasses.
- 7 July 2025
- Published by Elsevier in Materialia
- Vol. 42
Certification of boroxol ring population in vitreous BO glass using theoretical simulations- 7 July 2025
- Published by Elsevier in Materialia
- Vol. 42
Certification of boroxol ring population in vitreous BO glass using theoretical simulations- 19 December 2023
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 107 (5) , 2888-2900
Boron coordination and three‐membered ring formation in sodium borate glasses: a machine‐learning molecular dynamics study
Classical molecular dynamics (CMD) simulations that employ analytical force fields have been commonly utilized to investigate mechanical, chemical, and thermal properties of oxide glasses owing to their superior computational efficiency. Conversely, simple functional forms limit the accuracy in modeling complicated glass structures, specifically, in alkaline borate glasses, which exhibit boron coordination numbers that vary nonlinearly with changes in glass composition and temperature. Machine‐learning potentials (MLPs), which are trained using datasets on energy and force evaluated via the density functional theory (DFT), are garnering significant attention as a novel simulation technology for enhancing the accuracy in modeling materials. Therefore, this study applied a universal MLP, PreFerred Potential (PFP) (trade‐name: Matlantis), to model sodium borate glasses, and its accuracy was verified in reproducing boron coordination and ring structures by comparing its results to available experimental data. We found that PFP can quantitatively reproduce the boron coordination change with glass composition without any empirical correction, while the boron coordination in the melts at high temperatures is overestimated, even though the qualitative variation was better estimated than CMD simulations. Furthermore, the MLP could generate many 3‐rings, unlike the analytical force‐field. Accordingly, we demonstrated superior accuracy of the MLP in modeling alkaline borate glasses, while discussing the challenges faced in reproducing the elaborated microstructures in borate glasses.
- 19 December 2023
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 107 (5) , 2888-2900
Boron coordination and three‐membered ring formation in sodium borate glasses: a machine‐learning molecular dynamics study
Classical molecular dynamics (CMD) simulations that employ analytical force fields have been commonly utilized to investigate mechanical, chemical, and thermal properties of oxide glasses owing to their superior computational efficiency. Conversely, simple functional forms limit the accuracy in modeling complicated glass structures, specifically, in alkaline borate glasses, which exhibit boron coordination numbers that vary nonlinearly with changes in glass composition and temperature. Machine‐learning potentials (MLPs), which are trained using datasets on energy and force evaluated via the density functional theory (DFT), are garnering significant attention as a novel simulation technology for enhancing the accuracy in modeling materials. Therefore, this study applied a universal MLP, PreFerred Potential (PFP) (trade‐name: Matlantis), to model sodium borate glasses, and its accuracy was verified in reproducing boron coordination and ring structures by comparing its results to available experimental data. We found that PFP can quantitatively reproduce the boron coordination change with glass composition without any empirical correction, while the boron coordination in the melts at high temperatures is overestimated, even though the qualitative variation was better estimated than CMD simulations. Furthermore, the MLP could generate many 3‐rings, unlike the analytical force‐field. Accordingly, we demonstrated superior accuracy of the MLP in modeling alkaline borate glasses, while discussing the challenges faced in reproducing the elaborated microstructures in borate glasses.
- 4 May 2023
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 106 (8) , 5104-5105
Erratum for a new self‐consistent empirical potential model for multicomponent borate and borosilicate glasses
- 4 May 2023
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 106 (8) , 5104-5105
Erratum for a new self‐consistent empirical potential model for multicomponent borate and borosilicate glasses
- 16 May 2022
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 156 (19) , 194501
Biasing crystallization in fused silica: An assessment of optimal metadynamics parameters
Metadynamics is a useful technique to study rare events such as crystallization. It has been only recently applied to study nucleation and crystallization in glass-forming liquids such as silicates but the optimal set of parameters to drive crystallization and obtaining converged Free Energy Surfaces is still unexplored. In this work, we systematically investigated the effects of the simulation conditions to efficiently study the thermodynamics and mechanism of crystallization in highly viscous systems. As a prototype system, we used fused silica, which easily crystallizes to β-cristobalite through MetaD simulations, owing to its simple microstructure. We investigated the influence of the height, width, and bias factor used to define the biasing Gaussian potential, as well as the effects of the temperature and system size on the results. Among these parameters, the bias factor and temperature seem to be most effective to sample the free energy landscape of melt to crystal transition and reach convergence more quickly. We also demonstrate that the temperature rescaling from T > Tm is a reliable approach to recover free energy surfaces below Tm, provided that the temperature gap is below 600 K and the configurational space has been properly sampled. Finally, albeit a complete crystallization is hard to achieve with large simulation boxes, these can be reliably and effectively exploited to study the first stages of nucleation.
- 16 May 2022
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 156 (19) , 194501
Biasing crystallization in fused silica: An assessment of optimal metadynamics parameters
Metadynamics is a useful technique to study rare events such as crystallization. It has been only recently applied to study nucleation and crystallization in glass-forming liquids such as silicates but the optimal set of parameters to drive crystallization and obtaining converged Free Energy Surfaces is still unexplored. In this work, we systematically investigated the effects of the simulation conditions to efficiently study the thermodynamics and mechanism of crystallization in highly viscous systems. As a prototype system, we used fused silica, which easily crystallizes to β-cristobalite through MetaD simulations, owing to its simple microstructure. We investigated the influence of the height, width, and bias factor used to define the biasing Gaussian potential, as well as the effects of the temperature and system size on the results. Among these parameters, the bias factor and temperature seem to be most effective to sample the free energy landscape of melt to crystal transition and reach convergence more quickly. We also demonstrate that the temperature rescaling from T > Tm is a reliable approach to recover free energy surfaces below Tm, provided that the temperature gap is below 600 K and the configurational space has been properly sampled. Finally, albeit a complete crystallization is hard to achieve with large simulation boxes, these can be reliably and effectively exploited to study the first stages of nucleation.
- 1 October 2021
- Published by Elsevier in Journal of Non-Crystalline Solids
- Vol. 569
Investigation of alumino-silicate glasses by coupling experiments and simulations: Part II - radiation effects
- 1 October 2021
- Published by Elsevier in Journal of Non-Crystalline Solids
- Vol. 569
Investigation of alumino-silicate glasses by coupling experiments and simulations: Part II - radiation effects
- 1 September 2021
- Published by Elsevier in Journal of Non-Crystalline Solids
- Vol. 567
Investigation of alumino-silicate glasses by coupling experiments and simulations: Part I - Structures
- 1 September 2021
- Published by Elsevier in Journal of Non-Crystalline Solids
- Vol. 567
Investigation of alumino-silicate glasses by coupling experiments and simulations: Part I - Structures
- 30 July 2021
- Published by American Physical Society (APS) in Physical Review Materials
- Vol. 5 (7) , 075602
Exploring the crystallization path of lithium disilicate through metadynamics simulations
Understanding the crystallization mechanism in silica-based materials is of paramount importance to comprehend geological phenomena and to design novel materials for a variety of technological and industrial applications. In this work, we show that metadynamics simulations can effectively overcome a large energy barrier to crystallize from viscous oxide glass melts and can be used to identify the melt-to-crystal transition path of the lithium disilicate system. The accelerated atomistic simulation revealed of a two-step mechanism of the nanoscale crystal formation. First, a partially layered silica embryo appeared, and then a more ordered crystalline layer with size larger than the critical nucleus size was formed. Subsequently, lithium ions piled up around the silicate layer and triggered stacking of adjacent silicate layers, which eventually built a perfect crystal. Contrarily to previous hypotheses, no lithium metasilicate crystal was observed as a precursor of the homogeneous crystallization of lithium disilicate.
- 30 July 2021
- Published by American Physical Society (APS) in Physical Review Materials
- Vol. 5 (7) , 075602
Exploring the crystallization path of lithium disilicate through metadynamics simulations
Understanding the crystallization mechanism in silica-based materials is of paramount importance to comprehend geological phenomena and to design novel materials for a variety of technological and industrial applications. In this work, we show that metadynamics simulations can effectively overcome a large energy barrier to crystallize from viscous oxide glass melts and can be used to identify the melt-to-crystal transition path of the lithium disilicate system. The accelerated atomistic simulation revealed of a two-step mechanism of the nanoscale crystal formation. First, a partially layered silica embryo appeared, and then a more ordered crystalline layer with size larger than the critical nucleus size was formed. Subsequently, lithium ions piled up around the silicate layer and triggered stacking of adjacent silicate layers, which eventually built a perfect crystal. Contrarily to previous hypotheses, no lithium metasilicate crystal was observed as a precursor of the homogeneous crystallization of lithium disilicate.