Tor Inge Reigstad
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Tor Inge Reigstad has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
- Kjetil Uhlen
Department of Electric Energy, Faculty of Information Technology and Electrical Engineering, NTNU – Norwegian University of Science and Technology, 7034 Trondheim, Norway
6 shared publications Kjetil Uhlen
2 shared publicationsBendik Nybakk Torsater
SINTEF Energy Research,Department of Energy Systems,Trondheim,Norway
1 shared publicationBjorn Inge Oftedal
REN AS,Trondheim,Norway
1 shared publication- Daniel Bjerkehagen
SINTEF Energy Research, Postboks 4761 Torgarden, Trondheim, 7465, Norway
1 shared publication - Giuseppe Guidi
SINTEF Energy Research,Trondheim,Norway
1 shared publication
Latest Publications
- Open Access
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 14, 55676-55692
A Decision-Support Framework for Optimizing Operational Measures in Distribution Grids
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 14, 55676-55692
Open AccessA Decision-Support Framework for Optimizing Operational Measures in Distribution Grids
- Open Access
- 8 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 13, 161472-161487
PHIL Testing of a Battery Integrated Multilevel Converter Combining Real and Emulated Modules
This paper presents a Power Hardware-in-the-Loop (PHIL) testing methodology for emulating the different parts of a battery system with modular converters (a multilevel converter) developed in the SEABAT-project. Using PHIL offers significant advantages, such as reducing the risk of equipment damage and personal injury. In particular, the absence of a battery cell is a clear advantage regarding required safety measures. Additionally, it shortens development and testing cycles, as system testing can commence before the final hardware is available. The presented testing approach involves two physical battery modules, each with its real hardware module converters and control systems, but with emulated batteries. The remaining modules of the battery string are emulated using a wide-band power supply controlled by an OPAL-RT real-time simulator. The system also includes physical string controllers and a system master controller, with the string controller somewhat adapted to interface with the real-time simulator. During the PHIL testing phase, numerous minor and major software faults were identified and resolved early in the process. Furthermore, the control functionalities of a hybrid high-energy and high-power battery concept were tested and validated. The primary contribution of this work is the demonstration of integrating real and emulated battery modules with distributed converters within the same string of a multilevel converter in a PHIL test bench. It addresses the challenges and necessary adaptations for such a configuration.
- 8 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 13, 161472-161487
Open AccessPHIL Testing of a Battery Integrated Multilevel Converter Combining Real and Emulated Modules
This paper presents a Power Hardware-in-the-Loop (PHIL) testing methodology for emulating the different parts of a battery system with modular converters (a multilevel converter) developed in the SEABAT-project. Using PHIL offers significant advantages, such as reducing the risk of equipment damage and personal injury. In particular, the absence of a battery cell is a clear advantage regarding required safety measures. Additionally, it shortens development and testing cycles, as system testing can commence before the final hardware is available. The presented testing approach involves two physical battery modules, each with its real hardware module converters and control systems, but with emulated batteries. The remaining modules of the battery string are emulated using a wide-band power supply controlled by an OPAL-RT real-time simulator. The system also includes physical string controllers and a system master controller, with the string controller somewhat adapted to interface with the real-time simulator. During the PHIL testing phase, numerous minor and major software faults were identified and resolved early in the process. Furthermore, the control functionalities of a hybrid high-energy and high-power battery concept were tested and validated. The primary contribution of this work is the demonstration of integrating real and emulated battery modules with distributed converters within the same string of a multilevel converter in a PHIL test bench. It addresses the challenges and necessary adaptations for such a configuration.
- 6 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Delivery
- Vol. 40 (1) , 226-236
An Adaptive Special Protection Scheme Coordinating Multiple Generation Units for Damping Power System Natural Oscillations
This paper presents a special protection scheme (SPS) that mitigates natural oscillations in the power system by enabling selected adaptive power oscillation damping (APOD) controllers in wind farms or synchronous generators. The SPS activation is triggered by an online power oscillation detection algorithm. Furthermore, to tackle the intricacies of time delays within the control system, an adaptive time delay compensator (ATDC) has been integrated into the SPS control scheme. The SPS is tested on the New England 39 bus system by numerical simulations and in the Nordic 44 system by experimental testing with a hardware-in-the-loop approach. The numerical results show that the proposed SPS can increase the damping of low-frequency natural oscillations (LFOs) significantly and even avoid unstable situations with growing oscillations. Moreover, the laboratory validation demonstrates that the system is able to run in real-time and that the time delays caused by PMU measurements, communication, and computation can be handled correctly. Thus, the proposed SPS concept can possibly be implemented to serve as an additional and automatic tool for the system operators to damp natural power oscillations by coordinated control of multiple sources.
- 6 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Delivery
- Vol. 40 (1) , 226-236
An Adaptive Special Protection Scheme Coordinating Multiple Generation Units for Damping Power System Natural Oscillations
This paper presents a special protection scheme (SPS) that mitigates natural oscillations in the power system by enabling selected adaptive power oscillation damping (APOD) controllers in wind farms or synchronous generators. The SPS activation is triggered by an online power oscillation detection algorithm. Furthermore, to tackle the intricacies of time delays within the control system, an adaptive time delay compensator (ATDC) has been integrated into the SPS control scheme. The SPS is tested on the New England 39 bus system by numerical simulations and in the Nordic 44 system by experimental testing with a hardware-in-the-loop approach. The numerical results show that the proposed SPS can increase the damping of low-frequency natural oscillations (LFOs) significantly and even avoid unstable situations with growing oscillations. Moreover, the laboratory validation demonstrates that the system is able to run in real-time and that the time delays caused by PMU measurements, communication, and computation can be handled correctly. Thus, the proposed SPS concept can possibly be implemented to serve as an additional and automatic tool for the system operators to damp natural power oscillations by coordinated control of multiple sources.
- 5 September 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
A user-friendly tool for allocation of emission limits considering frequency-dependent impedance
Distribution system operators need simple tools for calculating the impact on voltage quality from new loads and renewable generation. This paper presents the further development and verification of a tool for allocating electrical emission quotas based on the standards IEC 61000-3-6, IEC 61000-3-7, and IEC 61000-3-13. The main focus is a simple methodology for estimating the frequency-dependent impedance, which will improve the accuracy of the allocation. Thus, the tool allows for higher single harmonic current limits for most customers, which could reduce their installation costs.
- 5 September 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
A user-friendly tool for allocation of emission limits considering frequency-dependent impedance
Distribution system operators need simple tools for calculating the impact on voltage quality from new loads and renewable generation. This paper presents the further development and verification of a tool for allocating electrical emission quotas based on the standards IEC 61000-3-6, IEC 61000-3-7, and IEC 61000-3-13. The main focus is a simple methodology for estimating the frequency-dependent impedance, which will improve the accuracy of the allocation. Thus, the tool allows for higher single harmonic current limits for most customers, which could reduce their installation costs.
- Open Access
- 13 July 2022
- Published by Elsevier in Electric Power Systems Research
- Vol. 211
A special protection scheme for damping power system oscillations by controlling wind farms
- 13 July 2022
- Published by Elsevier in Electric Power Systems Research
- Vol. 211
Open AccessA special protection scheme for damping power system oscillations by controlling wind farms
- 7 May 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Systems
- Vol. 36 (6) , 5476-5485
Variable Speed Hydropower for Provision of Fast Frequency Reserves in the Nordic Grid
The main purpose of this article is to demonstrate the grid support capability of variable speed hydropower (VSHP). The hypothesis is that active power control of VSHP plants can improve both the frequency stability and the transient rotor angle stability by contributing to virtual inertia (VI), fast frequency reserves and power oscillation damping. Fast active power control is made possible by power electronic converters obtaining the energy from the rotating masses of the turbine and generator while the rotational speed is restored by control of the guide vane opening of the hydro turbine. A detailed dynamic simulation model is developed to simulate the VSHP within the Nordic 44-bus grid model. The VSHP controller includes a moving horizon estimator (MHE), model predictive control (MPC) with inertia emulation realised by the frequency converter of the VSHP plant. The results show that VSHP can contribute significantly to reduce the maximum frequency deviation following a sudden loss of generation. In addition, the amplitudes of power oscillations are reduced and the critical fault clearing times are generally improved. The VSHP should, therefore, be regarded as one of the technically viable options for provision of fast balancing system services.
- 7 May 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Systems
- Vol. 36 (6) , 5476-5485
Variable Speed Hydropower for Provision of Fast Frequency Reserves in the Nordic Grid
The main purpose of this article is to demonstrate the grid support capability of variable speed hydropower (VSHP). The hypothesis is that active power control of VSHP plants can improve both the frequency stability and the transient rotor angle stability by contributing to virtual inertia (VI), fast frequency reserves and power oscillation damping. Fast active power control is made possible by power electronic converters obtaining the energy from the rotating masses of the turbine and generator while the rotational speed is restored by control of the guide vane opening of the hydro turbine. A detailed dynamic simulation model is developed to simulate the VSHP within the Nordic 44-bus grid model. The VSHP controller includes a moving horizon estimator (MHE), model predictive control (MPC) with inertia emulation realised by the frequency converter of the VSHP plant. The results show that VSHP can contribute significantly to reduce the maximum frequency deviation following a sudden loss of generation. In addition, the amplitudes of power oscillations are reduced and the critical fault clearing times are generally improved. The VSHP should, therefore, be regarded as one of the technically viable options for provision of fast balancing system services.
- Open Access
- 1 December 2020
- Published by Institution of Engineering and Technology (IET) in IET Renewable Power Generation
- Vol. 14 (19) , 4019-4028
Stability properties of non‐linear model predictive control of variable speed hydropower
This study presents a method for small‐signal analysis of an advanced, multi‐variable control system for variable speed hydropower (VSHP) plants. A model predictive controller (MPC) optimises the power plant performance. In parallel, a virtual synchronous generator‐type (VSG) converter control ensures that the VSHP contributes to virtual inertia and frequency control of the power system. The aim of the small‐signal analysis is to parametrise the cost function of the MPC to minimise oscillatory modes between the VSHP hydraulic system and the power system. A state‐space representation of the MPC is developed by assuming a stable steady‐state operating point equal to the reference values of the MPC cost function, and that no constraints are active. This state‐space representation allows for small‐signal analysis of the power system, including the MPC. The results show that the modes between the hydraulic system and the power system are well‐damped and negligible when the costs of deviations in the hydraulic system are low compared to the cost of deviations in the VSG power reference. Thus, these modes do not constrain the tuning of the VSG. The VSHP power output can, therefore, be optimised independently through the VSG controller to damp power oscillations and reduce frequency deviations.
- 1 December 2020
- Published by Institution of Engineering and Technology (IET) in IET Renewable Power Generation
- Vol. 14 (19) , 4019-4028
Open AccessStability properties of non‐linear model predictive control of variable speed hydropower
This study presents a method for small‐signal analysis of an advanced, multi‐variable control system for variable speed hydropower (VSHP) plants. A model predictive controller (MPC) optimises the power plant performance. In parallel, a virtual synchronous generator‐type (VSG) converter control ensures that the VSHP contributes to virtual inertia and frequency control of the power system. The aim of the small‐signal analysis is to parametrise the cost function of the MPC to minimise oscillatory modes between the VSHP hydraulic system and the power system. A state‐space representation of the MPC is developed by assuming a stable steady‐state operating point equal to the reference values of the MPC cost function, and that no constraints are active. This state‐space representation allows for small‐signal analysis of the power system, including the MPC. The results show that the modes between the hydraulic system and the power system are well‐damped and negligible when the costs of deviations in the hydraulic system are low compared to the cost of deviations in the VSG power reference. Thus, these modes do not constrain the tuning of the VSG. The VSHP power output can, therefore, be optimised independently through the VSG controller to damp power oscillations and reduce frequency deviations.
- Open Access
- 1 December 2020
- Published by Elsevier in Electric Power Systems Research
- Vol. 189
Optimized Control of Variable Speed Hydropower for Provision of Fast Frequency Reserves
- 1 December 2020
- Published by Elsevier in Electric Power Systems Research
- Vol. 189
Open AccessOptimized Control of Variable Speed Hydropower for Provision of Fast Frequency Reserves
- Open Access
Nonlinear Model Predictive Control of Variable Speed Hydropower for Provision of Fast Frequency Reserves
This paper presents the development of a non-linear model predictive controller (MPC) for controlling variable speed hydropower (VSHP) plants. The MPC coordinates the turbine controller with the virtual synchronous generator (VSG) control of the power electronics converter to optimize the plant's performance. The main objective is to deliver a fast power response to frequency deviations by utilizing the kinetic energy of the turbine and generator. This is made possible by allowing the turbine rotational speed to deviate temporarily from its optimal speed. In addition, the efficiency should be maximized while keeping the electric and hydraulic variables within their constraints. The simulation results show that the proposed MPC is also able to damp power oscillations in the grid, reduce water hammering in the penstock and improve the future estimation of turbine head, turbine power and turbine flow. This ensures that the turbine head does not exceed its limits and that the overshoot in the turbine speed after a disturbance is reduced. Besides, the VSG converter control enables a fast power response by utilizing the rotational energy of the turbine and generator. Thereby, the VSHP can provide a significant amount of fast frequency reserves (FFR) to the grid.
Open AccessNonlinear Model Predictive Control of Variable Speed Hydropower for Provision of Fast Frequency Reserves
This paper presents the development of a non-linear model predictive controller (MPC) for controlling variable speed hydropower (VSHP) plants. The MPC coordinates the turbine controller with the virtual synchronous generator (VSG) control of the power electronics converter to optimize the plant's performance. The main objective is to deliver a fast power response to frequency deviations by utilizing the kinetic energy of the turbine and generator. This is made possible by allowing the turbine rotational speed to deviate temporarily from its optimal speed. In addition, the efficiency should be maximized while keeping the electric and hydraulic variables within their constraints. The simulation results show that the proposed MPC is also able to damp power oscillations in the grid, reduce water hammering in the penstock and improve the future estimation of turbine head, turbine power and turbine flow. This ensures that the turbine head does not exceed its limits and that the overshoot in the turbine speed after a disturbance is reduced. Besides, the VSG converter control enables a fast power response by utilizing the rotational energy of the turbine and generator. Thereby, the VSHP can provide a significant amount of fast frequency reserves (FFR) to the grid.
- Open Access
Variable speed hydropower plant with virtual inertia control for provision of fast frequency reserves
In this paper, five virtual inertia control structures are implemented and tested on a variable speed hydropower (VSHP) plant. The results show that all five can deliver fast power reserves to maintain grid stability after disturbances after a disturbance. The VSHP is well suited for the purposed since its output power can be changed almost instantaneously by utilizing the rotational energy of the turbine and generator. This will cause the turbine rotational speed to deviate from its optimal value temporarily. Then the governor control will regain the turbine rotational speed by controlling the guide vane opening and thereby the turbine flow and mechanical power. With that, the VSHP output power can be changed permanently to contribute with primarily frequency reserves. Dynamic and eigenvalue analyses are performed to compare five different versions of the basic VSG and VSM control structures; VSG, power-frequency PID-controller with permanent droop (VSG-PID), VSM, VSM with power-frequency PD-controller (VSM-PD), and VSM with power-frequency PID-controller and permanent droop (VSM-PID). They are evaluated by two main criteria; their ability to deliver instantaneous power (inertia) to reduce the rate of change of frequency (ROCOF) and their contribution to frequency containment control (steady-state frequency droop response)
Open AccessVariable speed hydropower plant with virtual inertia control for provision of fast frequency reserves
In this paper, five virtual inertia control structures are implemented and tested on a variable speed hydropower (VSHP) plant. The results show that all five can deliver fast power reserves to maintain grid stability after disturbances after a disturbance. The VSHP is well suited for the purposed since its output power can be changed almost instantaneously by utilizing the rotational energy of the turbine and generator. This will cause the turbine rotational speed to deviate from its optimal value temporarily. Then the governor control will regain the turbine rotational speed by controlling the guide vane opening and thereby the turbine flow and mechanical power. With that, the VSHP output power can be changed permanently to contribute with primarily frequency reserves. Dynamic and eigenvalue analyses are performed to compare five different versions of the basic VSG and VSM control structures; VSG, power-frequency PID-controller with permanent droop (VSG-PID), VSM, VSM with power-frequency PD-controller (VSM-PD), and VSM with power-frequency PID-controller and permanent droop (VSM-PID). They are evaluated by two main criteria; their ability to deliver instantaneous power (inertia) to reduce the rate of change of frequency (ROCOF) and their contribution to frequency containment control (steady-state frequency droop response)