Esteban Sañudo
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Esteban Sañudo has a total of 26 co-authors. Here are the top co-authors by number of shared publications:
- Luis Cea
Universidade da Coruña
6 shared publications - Jerónimo Puertas
Universidade da Coruña
4 shared publications - Ernest Bladé
Polytechnic University of Catalonia
2 shared publications - Marcos Sanz-Ramos
Universitat Politecnica de Catalunya
2 shared publications - Orlando García-Feal
Universidade da Coruña
2 shared publications A. M. Pello-Rodríguez
Agencia de Medio Ambiente y Agua. Junta de Andalucía Calle Johan G. Gutenberg 1. 41092 Isla de la Cartuja. Sevilla España
1 shared publication
Latest Publications
- Open Access
- 27 May 2026
- Published by Elsevier in SSRN Electronic Journal
Why Urban Drainage Matters in Compound Coastal Flooding: Insights from Hurricane Irma (2017) in Havana, Cuba
Compound flooding in coastal cities arises from the concurrent action of storm surge, wave 16 overtopping, and intense rainfall, yet the influence of urban drainage systems on these interactions 17 remains poorly quantified. This study evaluates how the explicit representation of stormwater 18 drainage affects flood extent, depth, and duration during Hurricane Irma (2017) along the 19 Malecón of Havana, Cuba. A multi-scale modelling framework integrating Delft3D, XBeach-NH, 20 and the Iber–SWMM 2D–1D system was developed to simulate offshore surge generation, wave– 21 structure interactions, pluvial runoff, and surface–subsurface hydraulic coupling. Urban 22 topography was represented using a high-resolution LiDAR-based Digital Terrain Model, while 23 the drainage network was incorporated using detailed infrastructure data comprising 835 pipes, 24 835 manholes, and 2,288 inlets.
- 27 May 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessWhy Urban Drainage Matters in Compound Coastal Flooding: Insights from Hurricane Irma (2017) in Havana, Cuba
Compound flooding in coastal cities arises from the concurrent action of storm surge, wave 16 overtopping, and intense rainfall, yet the influence of urban drainage systems on these interactions 17 remains poorly quantified. This study evaluates how the explicit representation of stormwater 18 drainage affects flood extent, depth, and duration during Hurricane Irma (2017) along the 19 Malecón of Havana, Cuba. A multi-scale modelling framework integrating Delft3D, XBeach-NH, 20 and the Iber–SWMM 2D–1D system was developed to simulate offshore surge generation, wave– 21 structure interactions, pluvial runoff, and surface–subsurface hydraulic coupling. Urban 22 topography was represented using a high-resolution LiDAR-based Digital Terrain Model, while 23 the drainage network was incorporated using detailed infrastructure data comprising 835 pipes, 24 835 manholes, and 2,288 inlets.
- Open Access
- 14 February 2026
- Published by Elsevier in SSRN Electronic Journal
Uncertainty Quantification of Grate Inlet in a 1D-2D Coupled Urban Drainage Model: Implications for Sustainable Urban Drainage Design and Flood Resilience
As a key element connecting surface runoff and underground sewer flow, the design and working parameters of grate inlets have a decisive impact on urban surface inundation and network drainage process.The unclear impact mechanism of grate inlets on urban flooding limits the sustainable development of urban drainage infrastructure. At present, most of the 1D-2D dual-drainage models regard manholes as connecting elements instead of grate inlets, which are more relevant to the actual situation, and little is known about the influences of grate inlets on the evolution process of urban flooding at present. In this paper, we developed a Iber-SWMM model for the uncertainty quantification of grate inlets in the urban 1D-2D dual drainage model. We assessed the effects of distribution density, weir discharge coefficient, area, and the coupling of the above multi-parameters and spatial heterogeneity of grate inlets on the urban flood inundation and sewer drainage process. It is found that the larger the grate distribution density or weir discharge coefficient or area, the smaller the surface inundation area, and the smaller the maximum water depth, the larger the peak discharge and head in the network, and the earlier the peak discharge and head appear. However, compared with the weir discharge coefficient and distribution density of grate inlets, the area of grate inlets has less impact on the urban flooding process. All the distribution density, weir discharge coefficient, and area of grate inlets are taken as the minimum values, the surface inundation range and the water depth have reached the maximum, the peak discharge and head in the sewer also become smaller correspondingly, and the histories of the discharge and head in the sewer network are lagging, which leads to the urban surface flow cannot be timely discharged to the sewer network, resulting in more serious urban inundation. In addition, by adopting stronger drainage measures upstream of the catchment and relatively weaker drainage measures downstream, the surface inundation area and the maximum depth are smaller, and the peaks of head and discharge in the pipe network are also smaller. Thus, high water should be discharged, and flood interception in the source region has a better mitigation effect on urban flooding. This study provides an essential reference for improving the reliability of urban drainage models, contributes to the planning and design of urban drainage infrastructure and supports sustainable urban development.
- 14 February 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessUncertainty Quantification of Grate Inlet in a 1D-2D Coupled Urban Drainage Model: Implications for Sustainable Urban Drainage Design and Flood Resilience
As a key element connecting surface runoff and underground sewer flow, the design and working parameters of grate inlets have a decisive impact on urban surface inundation and network drainage process.The unclear impact mechanism of grate inlets on urban flooding limits the sustainable development of urban drainage infrastructure. At present, most of the 1D-2D dual-drainage models regard manholes as connecting elements instead of grate inlets, which are more relevant to the actual situation, and little is known about the influences of grate inlets on the evolution process of urban flooding at present. In this paper, we developed a Iber-SWMM model for the uncertainty quantification of grate inlets in the urban 1D-2D dual drainage model. We assessed the effects of distribution density, weir discharge coefficient, area, and the coupling of the above multi-parameters and spatial heterogeneity of grate inlets on the urban flood inundation and sewer drainage process. It is found that the larger the grate distribution density or weir discharge coefficient or area, the smaller the surface inundation area, and the smaller the maximum water depth, the larger the peak discharge and head in the network, and the earlier the peak discharge and head appear. However, compared with the weir discharge coefficient and distribution density of grate inlets, the area of grate inlets has less impact on the urban flooding process. All the distribution density, weir discharge coefficient, and area of grate inlets are taken as the minimum values, the surface inundation range and the water depth have reached the maximum, the peak discharge and head in the sewer also become smaller correspondingly, and the histories of the discharge and head in the sewer network are lagging, which leads to the urban surface flow cannot be timely discharged to the sewer network, resulting in more serious urban inundation. In addition, by adopting stronger drainage measures upstream of the catchment and relatively weaker drainage measures downstream, the surface inundation area and the maximum depth are smaller, and the peaks of head and discharge in the pipe network are also smaller. Thus, high water should be discharged, and flood interception in the source region has a better mitigation effect on urban flooding. This study provides an essential reference for improving the reliability of urban drainage models, contributes to the planning and design of urban drainage infrastructure and supports sustainable urban development.
- Open Access
- 30 April 2025
- Published by Universitat Politecnica de Valencia in Ingeniería del Agua
- Vol. 29 (2) , 114-131
Evolución de la modelización numérica bidimensional del flujo en lámina libre a través del software Iber
Iber es una herramienta de simulación hidráulica bidimensional surgida desde la academia para dar solución a problemas de ingeniería hidráulica y ambiental. Desde su nacimiento en 2010 se ha convertido en un software ampliamente aceptado para simular procesos hidrodinámicos de flujo en lámina libre. Este trabajo presenta la evolución de Iber y analiza las mejoras llevadas a cabo que actualmente permiten realizar simulaciones, completamente acopladas con la hidrodinámica, de transporte de sedimentos y calidad de aguas, de procesos hidrológicos a nivel de cuenca rural y urbana, de eco-hidráulica, etc. Los módulos y capacidades de cálculo implementados, así como las líneas de trabajo futuras, demuestran que la modelización hidrodinámica bidimensional todavía tiene un gran margen para el desarrollo de nuevas aplicaciones y mejoras. Iber sigue unas líneas de desarrollo con un enfoque eminentemente práctico, permitiendo a usuarios y usuarias realizar simulaciones cada vez más fidedignas al proceso físico a representar.
- 30 April 2025
- Published by Universitat Politecnica de Valencia in Ingeniería del Agua
- Vol. 29 (2) , 114-131
Open AccessEvolución de la modelización numérica bidimensional del flujo en lámina libre a través del software Iber
Iber es una herramienta de simulación hidráulica bidimensional surgida desde la academia para dar solución a problemas de ingeniería hidráulica y ambiental. Desde su nacimiento en 2010 se ha convertido en un software ampliamente aceptado para simular procesos hidrodinámicos de flujo en lámina libre. Este trabajo presenta la evolución de Iber y analiza las mejoras llevadas a cabo que actualmente permiten realizar simulaciones, completamente acopladas con la hidrodinámica, de transporte de sedimentos y calidad de aguas, de procesos hidrológicos a nivel de cuenca rural y urbana, de eco-hidráulica, etc. Los módulos y capacidades de cálculo implementados, así como las líneas de trabajo futuras, demuestran que la modelización hidrodinámica bidimensional todavía tiene un gran margen para el desarrollo de nuevas aplicaciones y mejoras. Iber sigue unas líneas de desarrollo con un enfoque eminentemente práctico, permitiendo a usuarios y usuarias realizar simulaciones cada vez más fidedignas al proceso físico a representar.
- Open Access
- 30 January 2024
- Published by Universitat Politecnica de Valencia in Revista de Teledetección
- No. 63,p. 79-97
Cobertura LiDAR-Fotogramétrica, batimetría y levantamiento de infraestructuras como soporte al análisis de riesgos de inundación en la subcuenca del río Genil
Las inundaciones son los desastres naturales que afectan a más personas en el Área Atlántica. En este sentido, el proyecto AA-Floods tiene el objetivo de desarrollar y poner en valor nuevas herramientas, planes y regulaciones que mejoren la gestión y la respuesta a las inundaciones. La importancia de la información altimétrica de calidad para la evaluación del peligro de inundación se basa en el conocimiento lo más detallado y preciso posible del relieve y de las alturas de los elementos situados sobre el suelo. Para ello se ha llevado a cabo una cobertura LiDAR de densidad 21 ptos/m² y fotogramétrica de resolución 0,10 m para la generación de productos altimétricos de gran exactitud posicional y alta precisión en los ámbitos de estudio de la cuenca del río Genil. Así mismo, se ha realizado el levantamiento batimétrico del cauce del río Genil y la obtención de Modelo final Topobatimétrico. Además, para el desarrollo adecuado de la modelización hidráulica y determinación de zonas inundables es necesario tomar en consideración todos aquellos elementos estructurales del cauce que afectan a la inundabilidad. Se ha realizado análisis de zonas inundables con estas fuentes de información que mejoran las utilizadas por el SNCZI. Los resultados se han contrastado con las láminas de inundación de 2010 cartografiadas mediante observación directa mediante satélite Radar.
- 30 January 2024
- Published by Universitat Politecnica de Valencia in Revista de Teledetección
- No. 63,p. 79-97
Open AccessCobertura LiDAR-Fotogramétrica, batimetría y levantamiento de infraestructuras como soporte al análisis de riesgos de inundación en la subcuenca del río Genil
Las inundaciones son los desastres naturales que afectan a más personas en el Área Atlántica. En este sentido, el proyecto AA-Floods tiene el objetivo de desarrollar y poner en valor nuevas herramientas, planes y regulaciones que mejoren la gestión y la respuesta a las inundaciones. La importancia de la información altimétrica de calidad para la evaluación del peligro de inundación se basa en el conocimiento lo más detallado y preciso posible del relieve y de las alturas de los elementos situados sobre el suelo. Para ello se ha llevado a cabo una cobertura LiDAR de densidad 21 ptos/m² y fotogramétrica de resolución 0,10 m para la generación de productos altimétricos de gran exactitud posicional y alta precisión en los ámbitos de estudio de la cuenca del río Genil. Así mismo, se ha realizado el levantamiento batimétrico del cauce del río Genil y la obtención de Modelo final Topobatimétrico. Además, para el desarrollo adecuado de la modelización hidráulica y determinación de zonas inundables es necesario tomar en consideración todos aquellos elementos estructurales del cauce que afectan a la inundabilidad. Se ha realizado análisis de zonas inundables con estas fuentes de información que mejoran las utilizadas por el SNCZI. Los resultados se han contrastado con las láminas de inundación de 2010 cartografiadas mediante observación directa mediante satélite Radar.
- Open Access
- 10 January 2024
- Published by Wiley in Hydrological Processes
- Vol. 38 (1)
Large‐scale physical facility and experimental dataset for the validation of urban drainage models
Numerical models are currently the main tool used to simulate the effects of urban flooding. The validation of these models requires thorough and accurate observed data in order to test their performance. The current study presents a series of laboratory experiments in a large‐scale urban drainage physical facility of approximately 100 m2 that includes roofs, streets, inlets, manholes and sewers. The facility is equipped with a rainfall simulator as well as a surface runoff and pipe inflows generators. The experiments were divided in two sets. In Set 1 the surface runoff was generated exclusively by the rainfall input, while in Set 2 the rainfall simulator was used in combination with the runoff generators. In all the tests the water discharge was measured at points on the inlets, roofs, and outfall. The water depth at different locations of the facility was also measured. The experimental tests were replicated numerically using the urban drainage model Iber‐SWMM. Experimental results show that, even in a relatively small catchment the peaks in the hydrographs generated at each element of the facility during intermittent rainfalls are significantly attenuated at the catchment outlet. The agreement between the experimental and numerical results show that there are some differences in the hydrographs generated at each element, but that these differences compensate each other and disappear at the outfall. The results generated provide the research community with a thorough and high‐resolution dataset obtained under controlled laboratory conditions in a large‐scale urban drainage facility, something which has not previously been available.
- 10 January 2024
- Published by Wiley in Hydrological Processes
- Vol. 38 (1)
Open AccessLarge‐scale physical facility and experimental dataset for the validation of urban drainage models
Numerical models are currently the main tool used to simulate the effects of urban flooding. The validation of these models requires thorough and accurate observed data in order to test their performance. The current study presents a series of laboratory experiments in a large‐scale urban drainage physical facility of approximately 100 m2 that includes roofs, streets, inlets, manholes and sewers. The facility is equipped with a rainfall simulator as well as a surface runoff and pipe inflows generators. The experiments were divided in two sets. In Set 1 the surface runoff was generated exclusively by the rainfall input, while in Set 2 the rainfall simulator was used in combination with the runoff generators. In all the tests the water discharge was measured at points on the inlets, roofs, and outfall. The water depth at different locations of the facility was also measured. The experimental tests were replicated numerically using the urban drainage model Iber‐SWMM. Experimental results show that, even in a relatively small catchment the peaks in the hydrographs generated at each element of the facility during intermittent rainfalls are significantly attenuated at the catchment outlet. The agreement between the experimental and numerical results show that there are some differences in the hydrographs generated at each element, but that these differences compensate each other and disappear at the outfall. The results generated provide the research community with a thorough and high‐resolution dataset obtained under controlled laboratory conditions in a large‐scale urban drainage facility, something which has not previously been available.
- Open Access
- 25 May 2022
- Published by Wiley in Hydrological Processes
- Vol. 36 (5)
Comparison of three different numerical implementations to model rainfall‐runoff transformation on roofs
Roofs represent a high percentage of the impervious surfaces in urban areas, and hence their implementation in urban drainage models is essential for accurate results to be achieved. Current modelling approaches are based on parameters such as a roof's slope and width, its roughness coefficient, and the initial abstraction. In this study, an experimental campaign was performed in order to assess the sensitivity of the roof runoff hydrographs to these parameters. The experimental tests were carried out in a new large‐scale urban drainage facility equipped with a rainfall simulator. The experimental tests were replicated numerically using three different levels of model resolution, from a high fidelity representation with a spatial resolution of 5 mm (which can be considered a digital twin) to a lumped representation. Our experimental results show that, for practical purposes, the sensitivity of the outlet runoff hydrograph to the roof slope tested is negligible. The numerical upscaling analysis carried out showed that flat roofs present a slightly different hydrograph behaviour with greater times of concentration than sloped roofs. No significant sensitivity of the outlet hydrograph to the surface roughness coefficient was found. In terms of numerical modelling, the use of a very high spatial resolution for the roof, which implies a high computational cost, does not affect the results significantly compared to the far simpler lumped approach. The current research involves the first thorough experimental and computational analysis of the runoff over roofs to date.
- 25 May 2022
- Published by Wiley in Hydrological Processes
- Vol. 36 (5)
Open AccessComparison of three different numerical implementations to model rainfall‐runoff transformation on roofs
Roofs represent a high percentage of the impervious surfaces in urban areas, and hence their implementation in urban drainage models is essential for accurate results to be achieved. Current modelling approaches are based on parameters such as a roof's slope and width, its roughness coefficient, and the initial abstraction. In this study, an experimental campaign was performed in order to assess the sensitivity of the roof runoff hydrographs to these parameters. The experimental tests were carried out in a new large‐scale urban drainage facility equipped with a rainfall simulator. The experimental tests were replicated numerically using three different levels of model resolution, from a high fidelity representation with a spatial resolution of 5 mm (which can be considered a digital twin) to a lumped representation. Our experimental results show that, for practical purposes, the sensitivity of the outlet runoff hydrograph to the roof slope tested is negligible. The numerical upscaling analysis carried out showed that flat roofs present a slightly different hydrograph behaviour with greater times of concentration than sloped roofs. No significant sensitivity of the outlet hydrograph to the surface roughness coefficient was found. In terms of numerical modelling, the use of a very high spatial resolution for the roof, which implies a high computational cost, does not affect the results significantly compared to the far simpler lumped approach. The current research involves the first thorough experimental and computational analysis of the runoff over roofs to date.
- Open Access
Modelling Pluvial Flooding in Urban Areas Coupling the Models Iber and SWMM
Dual urban drainage models allow users to simulate pluvial urban flooding by analysing the interaction between the sewer network (minor drainage system) and the overland flow (major drainage system). This work presents a free distribution dual drainage model linking the models Iber and Storm Water Management Model (SWMM), which are a 2D overland flow model and a 1D sewer network model, respectively. The linking methodology consists in a step by step calling process from Iber to a Dynamic-link Library (DLL) that contains the functions in which the SWMM code is split. The work involves the validation of the model in a simplified urban street, in a full-scale urban drainage physical model and in a real urban settlement. The three study cases have been carefully chosen to show and validate the main capabilities of the model. Therefore, the model is developed as a tool that considers the main hydrological and hydraulic processes during a rainfall event in an urban basin, allowing the user to plan, evaluate and design new or existing urban drainage systems in a realistic way.
Open AccessModelling Pluvial Flooding in Urban Areas Coupling the Models Iber and SWMM
Dual urban drainage models allow users to simulate pluvial urban flooding by analysing the interaction between the sewer network (minor drainage system) and the overland flow (major drainage system). This work presents a free distribution dual drainage model linking the models Iber and Storm Water Management Model (SWMM), which are a 2D overland flow model and a 1D sewer network model, respectively. The linking methodology consists in a step by step calling process from Iber to a Dynamic-link Library (DLL) that contains the functions in which the SWMM code is split. The work involves the validation of the model in a simplified urban street, in a full-scale urban drainage physical model and in a real urban settlement. The three study cases have been carefully chosen to show and validate the main capabilities of the model. Therefore, the model is developed as a tool that considers the main hydrological and hydraulic processes during a rainfall event in an urban basin, allowing the user to plan, evaluate and design new or existing urban drainage systems in a realistic way.
- Open Access
- 19 February 2010
- Published by Universidade da Coruna
Benchmarking of the Iber capabilities for 2D free surface flow modelling
- 19 February 2010
- Published by Universidade da Coruna
Open AccessBenchmarking of the Iber capabilities for 2D free surface flow modelling