Corrado Comparotto
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Corrado Comparotto has a total of 57 co-authors. Here are the top co-authors by number of shared publications:
- Jonathan. J. S. Scragg
Uppsala University
10 shared publications - Håkan Rensmo
Uppsala University
6 shared publications - Stefania Riva
Uppsala University
6 shared publications - Sergei M. Butorin
Condensed Matter Physics of Energy Materials, X-ray Photon Science, Department of Physics and Astronomy, Uppsala University, P.O. Box 516, SE-751 20 Uppsala, Sweden
5 shared publications - Soham Mukherjee
Uppsala University
5 shared publications - Olivier Donzel-Gargand
Uppsala University
4 shared publications
Latest Publications
- Open Access
- 10 July 2026
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 11 (29) , 43412-43418
Synthesis of BaZrS3 Perovskite Thin Films via Different Solid BaS x Intermediate Phases
The BaZrS3 perovskite has emerged as a promising compound for photovoltaic (PV) applications due to its unique optoelectronic properties, stability, and abundance of the constituent elements. Recent research has devoted considerable effort to decreasing the processing temperature to facilitate the integration of BaZrS3 thin films into optoelectronic devices. In this context, the formation of a barium polysulfide liquid flux as an intermediate phase is anticipated to promote BaZrS3 synthesis. This study investigates whether solid binaries can also accelerate the process at lower temperatures, i.e., below melting. To address this question, Ba–Zr precursors were sulfurized under various conditions that favor the formation of distinct solid BaSx intermediate phases during BaZrS3 synthesis, achieved by deliberately selecting processing temperatures below the melting points of any of the involved binary sulfides. The crystallinity of the resulting BaZrS3 thin films is evaluated by X-ray diffraction and transmission electron microscopy, revealing that the sulfurization conditions that favor solid BaS3 offer a greater advantage for BaZrS3 formation than those that promote BaS2, which in turn prove more favorable than those that favor BaS. Moreover, by varying sulfur partial pressure and sample temperature during sulfurization, this study disentangles the effects of these two parameters on BaZrS3 crystallization: the results indicate that the sulfurization conditions that favor BaS3 effectively promote BaZrS3 nucleation, while high temperatures predominantly enhance grain growth.
- 10 July 2026
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 11 (29) , 43412-43418
Open AccessSynthesis of BaZrS3 Perovskite Thin Films via Different Solid BaS x Intermediate Phases
The BaZrS3 perovskite has emerged as a promising compound for photovoltaic (PV) applications due to its unique optoelectronic properties, stability, and abundance of the constituent elements. Recent research has devoted considerable effort to decreasing the processing temperature to facilitate the integration of BaZrS3 thin films into optoelectronic devices. In this context, the formation of a barium polysulfide liquid flux as an intermediate phase is anticipated to promote BaZrS3 synthesis. This study investigates whether solid binaries can also accelerate the process at lower temperatures, i.e., below melting. To address this question, Ba–Zr precursors were sulfurized under various conditions that favor the formation of distinct solid BaSx intermediate phases during BaZrS3 synthesis, achieved by deliberately selecting processing temperatures below the melting points of any of the involved binary sulfides. The crystallinity of the resulting BaZrS3 thin films is evaluated by X-ray diffraction and transmission electron microscopy, revealing that the sulfurization conditions that favor solid BaS3 offer a greater advantage for BaZrS3 formation than those that promote BaS2, which in turn prove more favorable than those that favor BaS. Moreover, by varying sulfur partial pressure and sample temperature during sulfurization, this study disentangles the effects of these two parameters on BaZrS3 crystallization: the results indicate that the sulfurization conditions that favor BaS3 effectively promote BaZrS3 nucleation, while high temperatures predominantly enhance grain growth.
- Open Access
- 18 August 2025
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 8 (17) , 12512-12523
Process Development and Formation Chemistry of BaZrS3 Thin Films via a Two-Stage PVD Process
- 18 August 2025
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 8 (17) , 12512-12523
Open AccessProcess Development and Formation Chemistry of BaZrS3 Thin Films via a Two-Stage PVD Process
- Open Access
- 14 August 2025
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 8 (16) , 12281-12293
Surface Processing and Characterization of Stoichiometry-Varied BaZrS3 Thin Films
- 14 August 2025
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 8 (16) , 12281-12293
Open AccessSurface Processing and Characterization of Stoichiometry-Varied BaZrS3 Thin Films
- Open Access
- 10 July 2025
- Published by American Physical Society (APS) in PRX Energy
- Vol. 4 (3)
Charge Transport and Defects in Sulfur-Deficient Chalcogenide PerovskiteExploring the conduction mechanism in the chalcogenide perovskite Ba Zr S 3 is of significant interest due to its potential suitability as a top absorber layer in silicon-based tandem solar cells and other optoelectronic applications. Theoretical and experimental studies anticipate native ambipolar doping in Ba Zr S 3 , although experimental validation remains limited. This study reveals a transition from highly insulating behavior to n -type conductivity (approximately 100 S/cm) in Ba Zr S 3 thin films through annealing in an S -poor environment. Ba Zr S 3 thin films are synthesized via a two-step process: co-sputtering of Ba - Zr followed by sulfurization at 600 ∘ C , and subsequent annealing in high vacuum. Ultraviolet-visible spectroscopy measurements reveal a red shift of approximately 100 meV in the band gap concurrent with sample-color darkening after vacuum annealing. The increase in defect density from the order of 10 17 to 10 21 cm − 3 with vacuum annealing, coupled with the low activation energy (approximately 8 meV), and the n -type character of the defects, strongly suggests that sulfur vacancies ( V S ) are responsible for the n -type doping, in agreement with theoretical predictions. Temperature-dependent Hall measurement shows that phonon scattering governs charge transport at room temperature in Ba Zr S 3 films and that S vacancies are shallow donor defects acting as a weak impurity metal. The shift of the valence-band maximum (VBM) with respect to the Fermi level, quantified by hard x-ray photoelectron spectroscopy ( Ga K α , 9.25 keV), further corroborates the induced n type of conductivity in annealed samples. Our findings indicate that vacuum annealing induces V S defects that dominate charge transport, resulting in n -type conductivity in Ba Zr S 3 under S -poor conditions. These discoveries will inform important design choices, such as selecting appropriate contact materials, for integrating Ba Zr S 3 into solar cell structures or other devices.
- 10 July 2025
- Published by American Physical Society (APS) in PRX Energy
- Vol. 4 (3)
Open AccessCharge Transport and Defects in Sulfur-Deficient Chalcogenide PerovskiteExploring the conduction mechanism in the chalcogenide perovskite Ba Zr S 3 is of significant interest due to its potential suitability as a top absorber layer in silicon-based tandem solar cells and other optoelectronic applications. Theoretical and experimental studies anticipate native ambipolar doping in Ba Zr S 3 , although experimental validation remains limited. This study reveals a transition from highly insulating behavior to n -type conductivity (approximately 100 S/cm) in Ba Zr S 3 thin films through annealing in an S -poor environment. Ba Zr S 3 thin films are synthesized via a two-step process: co-sputtering of Ba - Zr followed by sulfurization at 600 ∘ C , and subsequent annealing in high vacuum. Ultraviolet-visible spectroscopy measurements reveal a red shift of approximately 100 meV in the band gap concurrent with sample-color darkening after vacuum annealing. The increase in defect density from the order of 10 17 to 10 21 cm − 3 with vacuum annealing, coupled with the low activation energy (approximately 8 meV), and the n -type character of the defects, strongly suggests that sulfur vacancies ( V S ) are responsible for the n -type doping, in agreement with theoretical predictions. Temperature-dependent Hall measurement shows that phonon scattering governs charge transport at room temperature in Ba Zr S 3 films and that S vacancies are shallow donor defects acting as a weak impurity metal. The shift of the valence-band maximum (VBM) with respect to the Fermi level, quantified by hard x-ray photoelectron spectroscopy ( Ga K α , 9.25 keV), further corroborates the induced n type of conductivity in annealed samples. Our findings indicate that vacuum annealing induces V S defects that dominate charge transport, resulting in n -type conductivity in Ba Zr S 3 under S -poor conditions. These discoveries will inform important design choices, such as selecting appropriate contact materials, for integrating Ba Zr S 3 into solar cell structures or other devices.
- Open Access
- 10 March 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 13 (14) , 9983-9991
Thermodynamic insights into the Ba–S system for the formation of BaZrS3 perovskites and other Ba sulfides
BaZrS3 stands out as one of the most extensively researched chalcogenide perovskites. Unlike its halide counterpart, this Pb-free alternative boasts superior intrinsic chemical stability. Notably, all three chemical elements are among the 20 most abundant elements in Earth's crust. With a band gap of approximately 1.8 eV, it is theoretically well suited to augment Si in tandem cells. Additionally, BaZrS3 exhibits one of the highest band-edge absorption levels among all known solar cell materials and maintains stability in air up to 400 °C. However, the synthesis of BaZrS3 thin films—essential for typical optoelectronic devices—remains a challenge. The primary obstacle lies in the elevated process temperatures required for achieving a high degree of crystallinity, potentially hindering integration into tandem photovoltaic devices. Nonetheless, the formation of high-order Ba polysulfides as intermediate phases can notably decrease the growth temperature of BaZrS3. The purpose of the present work is to produce a pressure-temperature phase diagram for the Ba–S system, defining the domains of stability of binary Ba sulfides. By independently varying the temperatures of the sample and the S vapor source, an experimental phase diagram is initially constructed. Then a first-principles thermodynamic model for the sulfurisation of Ba is built and the theoretical results are compared with the experimental results. Good agreement is found for the BaS2–BaS3 transition, while the discrepancy observed for the BaS2–BaS transition is attributed to equipment limitations. In the process, the easily overlooked roles of thermal gradients and thermal transport in the flow reactor are also highlighted. The insights gleaned are relevant to general thin-film sulfurisation systems, where achieving and maintaining a controlled high partial vapor pressure of S present greater challenges compared to solid-state chemistry. This study offers valuable thermodynamic guidance for the synthesis of a wide range of Ba sulfides and is of particular relevance for the formation of BaZrS3 perovskites at moderate temperature.
- 10 March 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 13 (14) , 9983-9991
Open AccessThermodynamic insights into the Ba–S system for the formation of BaZrS3 perovskites and other Ba sulfides
BaZrS3 stands out as one of the most extensively researched chalcogenide perovskites. Unlike its halide counterpart, this Pb-free alternative boasts superior intrinsic chemical stability. Notably, all three chemical elements are among the 20 most abundant elements in Earth's crust. With a band gap of approximately 1.8 eV, it is theoretically well suited to augment Si in tandem cells. Additionally, BaZrS3 exhibits one of the highest band-edge absorption levels among all known solar cell materials and maintains stability in air up to 400 °C. However, the synthesis of BaZrS3 thin films—essential for typical optoelectronic devices—remains a challenge. The primary obstacle lies in the elevated process temperatures required for achieving a high degree of crystallinity, potentially hindering integration into tandem photovoltaic devices. Nonetheless, the formation of high-order Ba polysulfides as intermediate phases can notably decrease the growth temperature of BaZrS3. The purpose of the present work is to produce a pressure-temperature phase diagram for the Ba–S system, defining the domains of stability of binary Ba sulfides. By independently varying the temperatures of the sample and the S vapor source, an experimental phase diagram is initially constructed. Then a first-principles thermodynamic model for the sulfurisation of Ba is built and the theoretical results are compared with the experimental results. Good agreement is found for the BaS2–BaS3 transition, while the discrepancy observed for the BaS2–BaS transition is attributed to equipment limitations. In the process, the easily overlooked roles of thermal gradients and thermal transport in the flow reactor are also highlighted. The insights gleaned are relevant to general thin-film sulfurisation systems, where achieving and maintaining a controlled high partial vapor pressure of S present greater challenges compared to solid-state chemistry. This study offers valuable thermodynamic guidance for the synthesis of a wide range of Ba sulfides and is of particular relevance for the formation of BaZrS3 perovskites at moderate temperature.
- Open Access
- 22 July 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (30) , 40210-40221
Electronic Structure and Surface Chemistry of BaZrS3 Perovskite Powder and Sputtered Thin Film
Chalcogenide perovskites exhibit optoelectronic properties that position them as potential materials in the field of photovoltaics. We report a detailed investigation into the electronic structure and chemical properties of polycrystalline BaZrS3 perovskite powder by X-ray photoelectron spectroscopy, complemented by an analysis of its long- and short-range geometric structures using X-ray diffraction and X-ray absorption spectroscopy. The results obtained for the powdered BaZrS3 are compared to similar measurements on a sputtered polycrystalline BaZrS3 thin film prepared through rapid thermal processing. While bulk characterization confirms the good quality of the powder, depth-profiling achieved by photoelectron spectroscopy utilizing Al Kα (1.487 keV) and Ga Kα (9.25 keV) radiations shows that, regardless of the fabrication method, the oxidation effects extend beyond 10 nm from the sample surface, with zirconium oxides specifically distributing deeper than the oxidized sulfur species. A hard X-ray photoelectron spectroscopy study on the powder and thin film detects signals with minimal contamination contributions and allows for the determination of the valence band maximum position with respect to the Fermi level. Based on these measurements, we establish a correlation between the experimental valence band spectra and the theoretical density of states derived from density functional theory calculations, thereby discerning the orbital constituents involved. Our analysis provides an improved understanding of the electronic structure of BaZrS3 developed through different synthesis protocols by linking it to material geometry, surface chemistry, and the nature of doping. This methodology can thus be adapted for describing electronic structures of chalcogenide perovskite semiconductors in general, a knowledge that is significant for interface engineering and, consequently, for device integration.
- 22 July 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (30) , 40210-40221
Open AccessElectronic Structure and Surface Chemistry of BaZrS3 Perovskite Powder and Sputtered Thin Film
Chalcogenide perovskites exhibit optoelectronic properties that position them as potential materials in the field of photovoltaics. We report a detailed investigation into the electronic structure and chemical properties of polycrystalline BaZrS3 perovskite powder by X-ray photoelectron spectroscopy, complemented by an analysis of its long- and short-range geometric structures using X-ray diffraction and X-ray absorption spectroscopy. The results obtained for the powdered BaZrS3 are compared to similar measurements on a sputtered polycrystalline BaZrS3 thin film prepared through rapid thermal processing. While bulk characterization confirms the good quality of the powder, depth-profiling achieved by photoelectron spectroscopy utilizing Al Kα (1.487 keV) and Ga Kα (9.25 keV) radiations shows that, regardless of the fabrication method, the oxidation effects extend beyond 10 nm from the sample surface, with zirconium oxides specifically distributing deeper than the oxidized sulfur species. A hard X-ray photoelectron spectroscopy study on the powder and thin film detects signals with minimal contamination contributions and allows for the determination of the valence band maximum position with respect to the Fermi level. Based on these measurements, we establish a correlation between the experimental valence band spectra and the theoretical density of states derived from density functional theory calculations, thereby discerning the orbital constituents involved. Our analysis provides an improved understanding of the electronic structure of BaZrS3 developed through different synthesis protocols by linking it to material geometry, surface chemistry, and the nature of doping. This methodology can thus be adapted for describing electronic structures of chalcogenide perovskite semiconductors in general, a knowledge that is significant for interface engineering and, consequently, for device integration.
- Open Access
- 17 January 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Electronic structure characterization by photoelectron spectroscopy of BaZrS3 perovskite powder and thin film
Chalcogenide perovskites exhibit optoelectronic properties that position them as breakthrough materials in the field of photovoltaics. We report a detailed investigation into the electronic structure and chemical properties (XPS) of polycrystalline BaZrS3 perovskite powder, complemented by an analysis of their geometric atomic arrangement using XRD and XAS. The results are compared with measurements on sputtered polycrystalline BaZrS3 thin film prepared through rapid thermal processing. Moreover, we establish a correlation between the experimental valence band spectra and the theoretical density of states derived from DFT calculations, thereby discerning the orbital constituents involved. While bulk characterization confirms the good quality of the powder, depth-profiling achieved by photoelectron spectroscopy utilizing Al Kα (1.487 keV) and Ga Kα (9.25 keV) radiations shows that, regardless of the fabrication method, the oxidation effects extend beyond 10 nm from the sample surface, with specifically zirconium oxides occurring deeper than the oxidized sulfur species. The hard X-ray photoelectron spectroscopy study on the powder and thin film detects signals with minimal contamination contributions and allows the determination of the valence band maximum position with respect to the Fermi level. Our analysis gives an improved understanding of the electronic structure of BaZrS3, linking the electronic structure of this semiconductor to the fundamental bonding properties of the material, providing knowledge which is crucial for interfaces development, and consequently, for device integration.
- 17 January 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessElectronic structure characterization by photoelectron spectroscopy of BaZrS3 perovskite powder and thin film
Chalcogenide perovskites exhibit optoelectronic properties that position them as breakthrough materials in the field of photovoltaics. We report a detailed investigation into the electronic structure and chemical properties (XPS) of polycrystalline BaZrS3 perovskite powder, complemented by an analysis of their geometric atomic arrangement using XRD and XAS. The results are compared with measurements on sputtered polycrystalline BaZrS3 thin film prepared through rapid thermal processing. Moreover, we establish a correlation between the experimental valence band spectra and the theoretical density of states derived from DFT calculations, thereby discerning the orbital constituents involved. While bulk characterization confirms the good quality of the powder, depth-profiling achieved by photoelectron spectroscopy utilizing Al Kα (1.487 keV) and Ga Kα (9.25 keV) radiations shows that, regardless of the fabrication method, the oxidation effects extend beyond 10 nm from the sample surface, with specifically zirconium oxides occurring deeper than the oxidized sulfur species. The hard X-ray photoelectron spectroscopy study on the powder and thin film detects signals with minimal contamination contributions and allows the determination of the valence band maximum position with respect to the Fermi level. Our analysis gives an improved understanding of the electronic structure of BaZrS3, linking the electronic structure of this semiconductor to the fundamental bonding properties of the material, providing knowledge which is crucial for interfaces development, and consequently, for device integration.
- Open Access
- 14 November 2023
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 6 (22) , 11642-11653
Interplay between Growth Mechanism, Materials Chemistry, and Band Gap Characteristics in Sputtered Thin Films of Chalcogenide Perovskite BaZrS3
- 14 November 2023
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 6 (22) , 11642-11653
Open AccessInterplay between Growth Mechanism, Materials Chemistry, and Band Gap Characteristics in Sputtered Thin Films of Chalcogenide Perovskite BaZrS3
- Open Access
- 16 August 2023
- Published by American Chemical Society (ACS) in ChemRxiv
Interplay between Growth Mechanism, Materials Chemistry, and Band Gap Characteristics in Sputtered Thin Films of Chalcogenide Perovskite BaZrS3
The prototypical chalcogenide perovskite BaZrS3, with its direct band gap, exceptionally strong light-harvesting ability and good carrier transport properties, provides fundamental prerequisites for a promising photovoltaic material. This inspired synthesis of BaZrS3 in the form of thin films, using sputtering and rapid thermal processing, aimed at device fabrication for future optoelectronic applications. Using a combination of long- and short-range structural information from x-ray absorption spectroscopy (XAS) and x-ray diffraction (XRD), we have elucidated how, starting from a random network of Ba, Zr, S atoms, thermal treatment induces crystallization and growth of BaZrS3 and explained its impact on observed PL properties. We also provide an electronic structure description and confirm the surface material chemistry using a combination of depth-dependent Photoelectron Spectroscopy (PES) using Hard X-ray (HAXPES) and traditional Al Kα radiation. From the knowledge of the optical band gap of BaZrS3 thin films, synthesized at an optimal temperature of 900°C, and our estimation of the valence band edge position with respect to the Fermi level, one may conclude that these semiconductor films are intrinsic in nature with a slight n-type character. A detailed understanding of the growth mechanism and electronic structure of BaZrS3 thin films helps pave the way for their use in photovoltaics.
- 16 August 2023
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessInterplay between Growth Mechanism, Materials Chemistry, and Band Gap Characteristics in Sputtered Thin Films of Chalcogenide Perovskite BaZrS3
The prototypical chalcogenide perovskite BaZrS3, with its direct band gap, exceptionally strong light-harvesting ability and good carrier transport properties, provides fundamental prerequisites for a promising photovoltaic material. This inspired synthesis of BaZrS3 in the form of thin films, using sputtering and rapid thermal processing, aimed at device fabrication for future optoelectronic applications. Using a combination of long- and short-range structural information from x-ray absorption spectroscopy (XAS) and x-ray diffraction (XRD), we have elucidated how, starting from a random network of Ba, Zr, S atoms, thermal treatment induces crystallization and growth of BaZrS3 and explained its impact on observed PL properties. We also provide an electronic structure description and confirm the surface material chemistry using a combination of depth-dependent Photoelectron Spectroscopy (PES) using Hard X-ray (HAXPES) and traditional Al Kα radiation. From the knowledge of the optical band gap of BaZrS3 thin films, synthesized at an optimal temperature of 900°C, and our estimation of the valence band edge position with respect to the Fermi level, one may conclude that these semiconductor films are intrinsic in nature with a slight n-type character. A detailed understanding of the growth mechanism and electronic structure of BaZrS3 thin films helps pave the way for their use in photovoltaics.
- Open Access
- 22 April 2022
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 5 (5) , 6335-6343
Synthesis of BaZrS3 Perovskite Thin Films at a Moderate Temperature on Conductive Substrates
- 22 April 2022
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 5 (5) , 6335-6343
Open AccessSynthesis of BaZrS3 Perovskite Thin Films at a Moderate Temperature on Conductive Substrates