Sandra Muizniece-Brasava
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Sandra Muizniece-Brasava has a total of 80 co-authors. Here are the top co-authors by number of shared publications:
- Martins Sabovics
Food Institute, Faculty of Agriculture and Food Technology, Latvia University of Life Sciences and Technologies, LV-3004 Jelgava, Latvia
4 shared publications - Vjaceslavs Kocetkovs
Latvia University of Life Sciences and Technologies, Latvia
4 shared publications - Asnate Kirse-Ozolina
Latvia University of Life Sciences and Technologies, Latvia
3 shared publications - Asnate Ķirse
Latvia University of Life Sciences and Technologies, Latvia
3 shared publications - Inga Ciprovica
Faculty of Agriculture and Food Technology, Latvia University of Life Sciences and Technologies, LV-3004 Jelgava, Latvia
3 shared publications Latvia University of Life Sciences and Technologies
3 shared publications
Latest Publications
- 1 December 2025
- Published by Latvia University of Life Sciences and Technologies
- Vol. 40, 540-545
Natural resource tax and its effects on packaging industry trends
One of the main tools for promoting sustainability and reducing environmental pollution is the Natural Resources Tax (hereinafter NRT). It influences the development trends of the packaging industry, promoting the transition to sustainable solutions, for example, reducing the amount of solid household waste produced and disposed of in the environment and significantly reducing the quantity of resources used in production. The aim of the study was to investigate and assess the impact of the NRT on the sustainability of the packaging industry and provide recommendations for its more effective implementation. This research paper used a narrative review and scoping review of the analytical literature, which provided an understanding of the operating principles of the NRT and its impact on packaging trends, paying close attention to tax policies aimed at both recyclable and non-recyclable plastic packaging. In addition, the motivation of packagers to prefer recyclable packaging solutions was studied. The study includes an analysis of the operating principles of the NRT, discusses practical aspects related to the choice of plastic packaging, and addresses the challenges faced by manufacturers in adapting to the new tax regulations. The study used the monographic method, analysis and synthesis methods as well as the graphical method. An in-depth assessment revealed that the NRT is an indirect determinant that influences and shapes trends in the packaging industry, as in the current situation, market demand has a more significant role in the choice of packaging materials.
- 1 December 2025
- Published by Latvia University of Life Sciences and Technologies
- Vol. 40, 540-545
Natural resource tax and its effects on packaging industry trends
One of the main tools for promoting sustainability and reducing environmental pollution is the Natural Resources Tax (hereinafter NRT). It influences the development trends of the packaging industry, promoting the transition to sustainable solutions, for example, reducing the amount of solid household waste produced and disposed of in the environment and significantly reducing the quantity of resources used in production. The aim of the study was to investigate and assess the impact of the NRT on the sustainability of the packaging industry and provide recommendations for its more effective implementation. This research paper used a narrative review and scoping review of the analytical literature, which provided an understanding of the operating principles of the NRT and its impact on packaging trends, paying close attention to tax policies aimed at both recyclable and non-recyclable plastic packaging. In addition, the motivation of packagers to prefer recyclable packaging solutions was studied. The study includes an analysis of the operating principles of the NRT, discusses practical aspects related to the choice of plastic packaging, and addresses the challenges faced by manufacturers in adapting to the new tax regulations. The study used the monographic method, analysis and synthesis methods as well as the graphical method. An in-depth assessment revealed that the NRT is an indirect determinant that influences and shapes trends in the packaging industry, as in the current situation, market demand has a more significant role in the choice of packaging materials.
- Open Access
- 23 December 2024
- Published by Publishing House of National Academy Agrarian Sciences of Ukraine in Food Resources
- Vol. 12 (23) , 8-15
BIODEGRADABLE FOOD PACKAGING: INSTITUTIONAL AND SOCIAL ASPECTS
Subject. Consumers’ attitudes to the use of biodegradable food packaging materials as an alternative to conventional plastics, focusing on institutional and social aspects, including environmental challenges, consumer benefits, and barriers to adoption. Challenges of the environmental impact of traditional plastic packaging and the possibility of replacing it with biodegradable materials made from organic raw materials to reduce the environmental burden are studied. Purpose. To analyze consumer willingness to buy products in biodegradable packaging, in particular to assess the factors influencing their choice and to identify the barriers that hinder wider use of such materials. Methods. A non-representative online survey of respondents of all ages was conducted. The methods of systematization, comparative analysis, and graphical methods of data visualization were used. Results. High consumer awareness of biodegradable packaging (89.5%) and a positive attitude towards its use were revealed. However, despite the willingness to pay more, the majority are ready to pay a small surcharge (up to 10%). The main barriers include high price, limited range and lack of information. The survey also revealed support for changes in legislation to stimulate the wider use of biodegradable packaging. Scope of results: The results can be used by food manufacturers to make decisions on the transition to biodegradable packaging, as well as by regulators to formulate policies and develop appropriate programs to stimulate the use of such packaging in food industry practices and for information campaigns to raise consumer awareness.
- 23 December 2024
- Published by Publishing House of National Academy Agrarian Sciences of Ukraine in Food Resources
- Vol. 12 (23) , 8-15
Open AccessBIODEGRADABLE FOOD PACKAGING: INSTITUTIONAL AND SOCIAL ASPECTS
Subject. Consumers’ attitudes to the use of biodegradable food packaging materials as an alternative to conventional plastics, focusing on institutional and social aspects, including environmental challenges, consumer benefits, and barriers to adoption. Challenges of the environmental impact of traditional plastic packaging and the possibility of replacing it with biodegradable materials made from organic raw materials to reduce the environmental burden are studied. Purpose. To analyze consumer willingness to buy products in biodegradable packaging, in particular to assess the factors influencing their choice and to identify the barriers that hinder wider use of such materials. Methods. A non-representative online survey of respondents of all ages was conducted. The methods of systematization, comparative analysis, and graphical methods of data visualization were used. Results. High consumer awareness of biodegradable packaging (89.5%) and a positive attitude towards its use were revealed. However, despite the willingness to pay more, the majority are ready to pay a small surcharge (up to 10%). The main barriers include high price, limited range and lack of information. The survey also revealed support for changes in legislation to stimulate the wider use of biodegradable packaging. Scope of results: The results can be used by food manufacturers to make decisions on the transition to biodegradable packaging, as well as by regulators to formulate policies and develop appropriate programs to stimulate the use of such packaging in food industry practices and for information campaigns to raise consumer awareness.
- Open Access
- 26 December 2023
- Published by Publishing House of National Academy Agrarian Sciences of Ukraine in Food Resources
- Vol. 11 (21) , 9-23
OVERVIEW OF THE CURRENT STATE OF SCIENTIFIC RESEARCH AND PRACTICAL ACCESS IN THE AREAS OF BIOLOGICAL DAIRY PACKAGING
Subject. Packaging materials made from biodegradable plastics used for packaging dairy products, as well as the technological properties of these materials that allow their use. Purpose. To justification of the feasibility of using biodegradable packaging materials, in particular bioplastics, for packaging milk and dairy products. Methods. During the research, a systematic approach was used to research factual materials, in particular scientific and scientific-practical literature, regulatory legal acts, regulatory documents and the like; abstract-logical approach to the synthesis of research results and the formulation of conclusions. Results. The dairy industry uses biodegradable plastics; bio-based materials derived from renewable resources that can be used for dairy products with a limited shelf life. Biodegradable materials must protect the dairy product from environmental influences and ensure that quality is maintained during transportation and storage. In this sense, mechanical and barrier properties regarding oxygen, carbon dioxide, water, light and odors are important. You should also consider technological aspects of safety (migration, microbial growth), sustainability (heat and chemical resistance), process requirements (weldability and formability), convenience and compliance with marketing principles (communication, printing options). Acceptable mechanical properties are important, which ensure the quality and food safety of the dairy product even during long-term storage and transportation. The mechanical properties of polylactide (PLA) in semi-crystalline form are suitable, the mechanical properties of starch-polycaprolactone (PCL) are somewhat worse. Since hot fill and sterilization can be used for liquid dairy products with a long shelf life, it should be kept in mind that PLA containers are only stable up to a temperature of 55°C, while materials based on starch-PCL mixtures were stable between 60 and 90°C. Good water vapor barrier properties are critical when packaging dairy products such as butter and cheese, where preventing moisture loss and surface drying is key. Dairy products are often sour, salty or high in fat, it is important to evaluate the chemical resistance as acceptable for PLA. Some microorganisms can use bio-based packaging materials as energy sources. PLA biofilms prevent the growth of molds, and packaging materials based on starch-PCL promote the growth of molds that can affect food products – therefore, it is advisable to include antimicrobial compounds in the material. Migration, the transfer of substances from packaging to food products, according to standards should not exceed 10 mg/dm2. The analysis of scientific and technical information proves the possibility and feasibility of using biodegradable materials, in particular bioplastics, as innovative packaging materials for use in the dairy industry. These materials do not differ significantly in mechanical and other technological properties from traditional plastics made from hydrocarbon raw materials. For the practical research was used Soft cheese Kleo (produced in Latvia). It was packaged by the Ceramis®-PLA-SiOx coating film known as the first new biodegradable PLA film with improved barrier properties. However the tests on soft cheese packaging using Ceramis®-PLA-SiOx film gave a negative result, since this packaging material ensured the storage of a perishable product only for 10 days. Therefore, it is expedient to include other PLA films and other polymeric biodegradable materials. Scope of results. The results obtained will be used to improve production technologies for various types of dairy products, improve their food safety and quality, and also to preserve the environment by ensuring the biodegradability of packaging materials.
- 26 December 2023
- Published by Publishing House of National Academy Agrarian Sciences of Ukraine in Food Resources
- Vol. 11 (21) , 9-23
Open AccessOVERVIEW OF THE CURRENT STATE OF SCIENTIFIC RESEARCH AND PRACTICAL ACCESS IN THE AREAS OF BIOLOGICAL DAIRY PACKAGING
Subject. Packaging materials made from biodegradable plastics used for packaging dairy products, as well as the technological properties of these materials that allow their use. Purpose. To justification of the feasibility of using biodegradable packaging materials, in particular bioplastics, for packaging milk and dairy products. Methods. During the research, a systematic approach was used to research factual materials, in particular scientific and scientific-practical literature, regulatory legal acts, regulatory documents and the like; abstract-logical approach to the synthesis of research results and the formulation of conclusions. Results. The dairy industry uses biodegradable plastics; bio-based materials derived from renewable resources that can be used for dairy products with a limited shelf life. Biodegradable materials must protect the dairy product from environmental influences and ensure that quality is maintained during transportation and storage. In this sense, mechanical and barrier properties regarding oxygen, carbon dioxide, water, light and odors are important. You should also consider technological aspects of safety (migration, microbial growth), sustainability (heat and chemical resistance), process requirements (weldability and formability), convenience and compliance with marketing principles (communication, printing options). Acceptable mechanical properties are important, which ensure the quality and food safety of the dairy product even during long-term storage and transportation. The mechanical properties of polylactide (PLA) in semi-crystalline form are suitable, the mechanical properties of starch-polycaprolactone (PCL) are somewhat worse. Since hot fill and sterilization can be used for liquid dairy products with a long shelf life, it should be kept in mind that PLA containers are only stable up to a temperature of 55°C, while materials based on starch-PCL mixtures were stable between 60 and 90°C. Good water vapor barrier properties are critical when packaging dairy products such as butter and cheese, where preventing moisture loss and surface drying is key. Dairy products are often sour, salty or high in fat, it is important to evaluate the chemical resistance as acceptable for PLA. Some microorganisms can use bio-based packaging materials as energy sources. PLA biofilms prevent the growth of molds, and packaging materials based on starch-PCL promote the growth of molds that can affect food products – therefore, it is advisable to include antimicrobial compounds in the material. Migration, the transfer of substances from packaging to food products, according to standards should not exceed 10 mg/dm2. The analysis of scientific and technical information proves the possibility and feasibility of using biodegradable materials, in particular bioplastics, as innovative packaging materials for use in the dairy industry. These materials do not differ significantly in mechanical and other technological properties from traditional plastics made from hydrocarbon raw materials. For the practical research was used Soft cheese Kleo (produced in Latvia). It was packaged by the Ceramis®-PLA-SiOx coating film known as the first new biodegradable PLA film with improved barrier properties. However the tests on soft cheese packaging using Ceramis®-PLA-SiOx film gave a negative result, since this packaging material ensured the storage of a perishable product only for 10 days. Therefore, it is expedient to include other PLA films and other polymeric biodegradable materials. Scope of results. The results obtained will be used to improve production technologies for various types of dairy products, improve their food safety and quality, and also to preserve the environment by ensuring the biodegradability of packaging materials.
- Open Access
- 17 December 2023
- Published by Latvia University of Life Sciences and Technologies
- Vol. 38, 68-76
The anti-nutritional factors of legumes and their treatment possibilities: a review
Today the demand for plant-based protein is growing rapidly due to increased awareness of animal protein growing costs and limited supply and has been highly related to biodiversity loss, climate change, and freshwater depletion. Legumes are in demand for their high content of protein, minerals, vitamins, and carbohydrates, also including dietary fibre. Legumes are rich not only in macronutrients and micronutrients but also contain anti-nutritional factors. One of the most important anti-nutritive properties of legumes is their high trypsin activity. The length of time required for the preparation of legumes has limited their frequency of use compared to recommended intake levels. By heat treatment, an anti-nutritional component in legumes can be mostly separated. The possibility of using extrusion cooking, microwave dryer, roasting equipment, etc., is widely studied. Roasting is one of the widespread methods for treatment of legumes that significantly enhances the texture, flavour, colour, and product appearance. The latest studies in the legume treatments report valuable results after the combined treatments, wet roasting, which includes: dehulling, soaking, and roasting. Heat treatment can be a potential way to improve legumes use in food production: reducing the time required for treatment, preparation and improving nutritional value.
- 17 December 2023
- Published by Latvia University of Life Sciences and Technologies
- Vol. 38, 68-76
Open AccessThe anti-nutritional factors of legumes and their treatment possibilities: a review
Today the demand for plant-based protein is growing rapidly due to increased awareness of animal protein growing costs and limited supply and has been highly related to biodiversity loss, climate change, and freshwater depletion. Legumes are in demand for their high content of protein, minerals, vitamins, and carbohydrates, also including dietary fibre. Legumes are rich not only in macronutrients and micronutrients but also contain anti-nutritional factors. One of the most important anti-nutritive properties of legumes is their high trypsin activity. The length of time required for the preparation of legumes has limited their frequency of use compared to recommended intake levels. By heat treatment, an anti-nutritional component in legumes can be mostly separated. The possibility of using extrusion cooking, microwave dryer, roasting equipment, etc., is widely studied. Roasting is one of the widespread methods for treatment of legumes that significantly enhances the texture, flavour, colour, and product appearance. The latest studies in the legume treatments report valuable results after the combined treatments, wet roasting, which includes: dehulling, soaking, and roasting. Heat treatment can be a potential way to improve legumes use in food production: reducing the time required for treatment, preparation and improving nutritional value.
- Open Access
- 22 February 2023
- Published by MDPI AG in Microorganisms
- Vol. 11 (3) , 557
Screening for Antifungal Indigenous Lactobacilli Strains Isolated from Local Fermented Milk for Developing Bioprotective Fermentates and Coatings Based on Acid Whey Protein Concentrate for Fresh Cheese Quality Maintenance
The demand for healthy foods without artificial food additives is constantly increasing. Hence, natural food preservation methods using bioprotective cultures could be an alternative to chemical preservatives. Thus, the main purpose of this work was to screen the indigenous lactobacilli isolated from fermented cow milk for their safety and antifungal activity to select the safe strain with the strongest fungicidal properties for the development of bioprotective acid whey protein concentrate (AWPC) based fermentates and their coatings intended for fresh cheese quality maintenance. Therefore, 12 lactobacilli strains were isolated and identified from raw fermented cow milk as protective cultures. The safety of the stains was determined by applying antibiotic susceptibility, haemolytic and enzymatic evaluation. Only one strain, Lacticaseibacillus paracasei A11, met all safety requirements and demonstrated a broad spectrum of antifungal activity in vitro. The strain was cultivated in AWPC for 48 h and grew well (biomass yield 8 log10 cfu mL−1). L. paracasei A11 AWPC fermentate was used as a vehicle for protective culture in the development of pectin-AWPC-based edible coating. Both the fermentate and coating were tested for their antimicrobial properties on fresh acid-curd cheese. Coating with L. paracasei A11 strain reduced yeast and mould counts by 1.0–1.5 log10 cfu mL−1 (p ≤ 0.001) during cheese storage (14 days), simultaneously preserving its flavour and prolonging the shelf life for six days.
- 22 February 2023
- Published by MDPI AG in Microorganisms
- Vol. 11 (3) , 557
Open AccessScreening for Antifungal Indigenous Lactobacilli Strains Isolated from Local Fermented Milk for Developing Bioprotective Fermentates and Coatings Based on Acid Whey Protein Concentrate for Fresh Cheese Quality Maintenance
The demand for healthy foods without artificial food additives is constantly increasing. Hence, natural food preservation methods using bioprotective cultures could be an alternative to chemical preservatives. Thus, the main purpose of this work was to screen the indigenous lactobacilli isolated from fermented cow milk for their safety and antifungal activity to select the safe strain with the strongest fungicidal properties for the development of bioprotective acid whey protein concentrate (AWPC) based fermentates and their coatings intended for fresh cheese quality maintenance. Therefore, 12 lactobacilli strains were isolated and identified from raw fermented cow milk as protective cultures. The safety of the stains was determined by applying antibiotic susceptibility, haemolytic and enzymatic evaluation. Only one strain, Lacticaseibacillus paracasei A11, met all safety requirements and demonstrated a broad spectrum of antifungal activity in vitro. The strain was cultivated in AWPC for 48 h and grew well (biomass yield 8 log10 cfu mL−1). L. paracasei A11 AWPC fermentate was used as a vehicle for protective culture in the development of pectin-AWPC-based edible coating. Both the fermentate and coating were tested for their antimicrobial properties on fresh acid-curd cheese. Coating with L. paracasei A11 strain reduced yeast and mould counts by 1.0–1.5 log10 cfu mL−1 (p ≤ 0.001) during cheese storage (14 days), simultaneously preserving its flavour and prolonging the shelf life for six days.
- Open Access
- 14 November 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (22) , 11539
The Impact of Eggshell Thickness on the Qualitative Characteristics of Stored Eggs Produced by Three Breeds of Laying Hens of the Cage and Cage-Free Housed Systems
The study aimed to compare the physical-chemical attributes of table eggs from three laying hen breeds housed in the cage and cage-free conditions and to characterize the morphological characteristics of the eggshell interior. A morphological and elemental analysis performed by scanning electron microscope coupled with energy dispersive X-ray spectroscopy revealed no abnormalities in the structural integrity of eggshells. The thickness of the eggshell varied in the range from 356.2 to 366.4 µm, with no statistically significant differences between the values. Eggshell membrane thickness was between 20.0 and 59.9 µm, with eggs derived from cage-housed hens, i.e., H/LS/CCE and H/HN/CCE having thinner membrane layers. The results revealed no direct relationships between eggshell and membrane thickness and physical-chemical parameters’ change. However, the presence of thick and long spider-like microcracks on the eggshell surface of eggs from cage-free housed hens H/D/BWE was the main factor that presumably contributed to substantial weight loss during 36 days of egg storage. A noticeable decline in eggshell-breaking strength along with the enlargement of air cells was observed in eggs produced under an enriched cage system H/LS/CCE after 28 days. In contrast, the minor changes in air cell size occurred in eggs from cage-free housed laying hens H/D/BWE. Protein quality indicators such as albumen height and Haugh units were well correlated with each other, and the intensity of their changes during egg storage, to a greater extent, was found to be storage time-dependent. No significant depletion of egg albumen was revealed during the first 15 days of egg storage. According to the United States Department of Agriculture, the quality corresponded to grade A (reasonably firm). However, after 18 days of storage, Haugh unit values were lower than 60, corresponding to grade B (weak and watery). The most apparent reduction in the Haugh unit was observed in eggs produced by enriched cage H/HN/CCE and cage-free H/D/BWE hens. The egg quality was storage time-dependent, and their deterioration rate was primarily associated with the genetic background of laying hens and housing conditions.
- 14 November 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (22) , 11539
Open AccessThe Impact of Eggshell Thickness on the Qualitative Characteristics of Stored Eggs Produced by Three Breeds of Laying Hens of the Cage and Cage-Free Housed Systems
The study aimed to compare the physical-chemical attributes of table eggs from three laying hen breeds housed in the cage and cage-free conditions and to characterize the morphological characteristics of the eggshell interior. A morphological and elemental analysis performed by scanning electron microscope coupled with energy dispersive X-ray spectroscopy revealed no abnormalities in the structural integrity of eggshells. The thickness of the eggshell varied in the range from 356.2 to 366.4 µm, with no statistically significant differences between the values. Eggshell membrane thickness was between 20.0 and 59.9 µm, with eggs derived from cage-housed hens, i.e., H/LS/CCE and H/HN/CCE having thinner membrane layers. The results revealed no direct relationships between eggshell and membrane thickness and physical-chemical parameters’ change. However, the presence of thick and long spider-like microcracks on the eggshell surface of eggs from cage-free housed hens H/D/BWE was the main factor that presumably contributed to substantial weight loss during 36 days of egg storage. A noticeable decline in eggshell-breaking strength along with the enlargement of air cells was observed in eggs produced under an enriched cage system H/LS/CCE after 28 days. In contrast, the minor changes in air cell size occurred in eggs from cage-free housed laying hens H/D/BWE. Protein quality indicators such as albumen height and Haugh units were well correlated with each other, and the intensity of their changes during egg storage, to a greater extent, was found to be storage time-dependent. No significant depletion of egg albumen was revealed during the first 15 days of egg storage. According to the United States Department of Agriculture, the quality corresponded to grade A (reasonably firm). However, after 18 days of storage, Haugh unit values were lower than 60, corresponding to grade B (weak and watery). The most apparent reduction in the Haugh unit was observed in eggs produced by enriched cage H/HN/CCE and cage-free H/D/BWE hens. The egg quality was storage time-dependent, and their deterioration rate was primarily associated with the genetic background of laying hens and housing conditions.
- Open Access
Variation in the Fatty Acid and Amino Acid Profiles of Pasteurized Liquid Whole Hen Egg Products Stored in Four Types of Packaging
This study aimed to determine the ability of high-density polyethylene, polyethylene terephthalate, Tetra Rex® Bio-based packaging, and Doypack (stand-up pouches) packaging to maintain the nutritional quality and safety of liquid whole egg products for 35 days of refrigerated storage. High-grade hen eggs were used for the preparation of liquid whole egg products (LWEPs). The conformity of eggs quality to grade A was supported by the initial screening of the raw materials’ physical–chemical attributes, which remained unchanged during the 25 days of storage. The obtained results indicated that the content of fatty acids in LWEPs was affected by both storage time and packaging material. However, the better preservation of monounsaturated fatty acids was achieved by polyethylene terephthalate, followed by high-density polyethylene packaging. Meanwhile, a statistically significant advantage of polyethylene terephthalate over other packaging materials was also confirmed regarding the maintenance of polyunsaturated fatty acids during 35 days of LWEPs storage. Relative fluctuations in the number of fatty acids in Tetra Rex® Bio-based and Doypack-stored LWEPs revealed their disadvantages manifested by exfoliation of composite layers, which perhaps was the main cause of extensive moisture loss. Overall, due to superior barrier properties, polyethylene terephthalate packaging demonstrated better preservation of amino acids. Only as much as a 2.1% decrease was observed between the initial value and the 35th day of LWEP storage. From a microbiological standpoint, all materials demonstrated the ability to ensure the microbiological safety of products during 35 days of storage, as the maximum allowed limit of 105 CFU g−1 was not exceeded.
Open AccessVariation in the Fatty Acid and Amino Acid Profiles of Pasteurized Liquid Whole Hen Egg Products Stored in Four Types of Packaging
This study aimed to determine the ability of high-density polyethylene, polyethylene terephthalate, Tetra Rex® Bio-based packaging, and Doypack (stand-up pouches) packaging to maintain the nutritional quality and safety of liquid whole egg products for 35 days of refrigerated storage. High-grade hen eggs were used for the preparation of liquid whole egg products (LWEPs). The conformity of eggs quality to grade A was supported by the initial screening of the raw materials’ physical–chemical attributes, which remained unchanged during the 25 days of storage. The obtained results indicated that the content of fatty acids in LWEPs was affected by both storage time and packaging material. However, the better preservation of monounsaturated fatty acids was achieved by polyethylene terephthalate, followed by high-density polyethylene packaging. Meanwhile, a statistically significant advantage of polyethylene terephthalate over other packaging materials was also confirmed regarding the maintenance of polyunsaturated fatty acids during 35 days of LWEPs storage. Relative fluctuations in the number of fatty acids in Tetra Rex® Bio-based and Doypack-stored LWEPs revealed their disadvantages manifested by exfoliation of composite layers, which perhaps was the main cause of extensive moisture loss. Overall, due to superior barrier properties, polyethylene terephthalate packaging demonstrated better preservation of amino acids. Only as much as a 2.1% decrease was observed between the initial value and the 35th day of LWEP storage. From a microbiological standpoint, all materials demonstrated the ability to ensure the microbiological safety of products during 35 days of storage, as the maximum allowed limit of 105 CFU g−1 was not exceeded.
- Open Access
Application of Edible Coating Based on Liquid Acid Whey Protein Concentrate with Indigenous Lactobacillus helveticus for Acid-Curd Cheese Quality Improvement
Edible coatings as carriers for protective lactic acid bacteria (LAB) can enhance hygienic quality to dairy products. Thus, the aim of this study was to improve the quality of artisanal acid-curd cheese by applying liquid acid whey protein concentrate based edible coating with entrapped indigenous antimicrobial Lactobacillus helveticus MI-LH13. The edible fresh acid-curd cheese coating was composed of 100% (w/w) liquid acid whey protein concentrate (LAWPC), apple pectin, sunflower oil, and glycerol containing 6 log10 CFU/mL of strain biomass applied on cheese by dipping. The cheese samples were examined over 21 days of storage for changes of microbiological criteria (LAB, yeast and mould, coliform, enterobacteria, and lipolytic microorganism), physicochemical (pH, lactic acid, protein, fat, moisture content, and colour), rheological, and sensory properties. The coating significantly improved appearance and slowed down discolouration of cheese by preserving moisture during prolonged storage. The immobilisation of L. helveticus cells into the coating had no negative effect on their viability throughout 14 days of storage at 4 °C and 23 °C. The application of coating with immobilised cells on cheeses significantly decreased the counts of yeast up to 1 log10 CFU/g during 14 days (p < 0.05) of storage and suppressed growth of mould for 21 days resulting in improved flavour of curd cheese at the end of storage. These findings indicate that LAWPC-pectin formulation provided an excellent matrix to support L. helveticus cell viability. Acting as protective antimicrobial barrier in fresh cheeses, this bioactive coating can reduce microbial contamination after processing enabling the producers to extend the shelf life of this perishable product.
Open AccessApplication of Edible Coating Based on Liquid Acid Whey Protein Concentrate with Indigenous Lactobacillus helveticus for Acid-Curd Cheese Quality Improvement
Edible coatings as carriers for protective lactic acid bacteria (LAB) can enhance hygienic quality to dairy products. Thus, the aim of this study was to improve the quality of artisanal acid-curd cheese by applying liquid acid whey protein concentrate based edible coating with entrapped indigenous antimicrobial Lactobacillus helveticus MI-LH13. The edible fresh acid-curd cheese coating was composed of 100% (w/w) liquid acid whey protein concentrate (LAWPC), apple pectin, sunflower oil, and glycerol containing 6 log10 CFU/mL of strain biomass applied on cheese by dipping. The cheese samples were examined over 21 days of storage for changes of microbiological criteria (LAB, yeast and mould, coliform, enterobacteria, and lipolytic microorganism), physicochemical (pH, lactic acid, protein, fat, moisture content, and colour), rheological, and sensory properties. The coating significantly improved appearance and slowed down discolouration of cheese by preserving moisture during prolonged storage. The immobilisation of L. helveticus cells into the coating had no negative effect on their viability throughout 14 days of storage at 4 °C and 23 °C. The application of coating with immobilised cells on cheeses significantly decreased the counts of yeast up to 1 log10 CFU/g during 14 days (p < 0.05) of storage and suppressed growth of mould for 21 days resulting in improved flavour of curd cheese at the end of storage. These findings indicate that LAWPC-pectin formulation provided an excellent matrix to support L. helveticus cell viability. Acting as protective antimicrobial barrier in fresh cheeses, this bioactive coating can reduce microbial contamination after processing enabling the producers to extend the shelf life of this perishable product.