TTTetiana Tkachenko

Tetiana Tkachenko

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Tetiana Tkachenko has a total of 50 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Sulfonated nanoscale graphite as a catalyst for the alcoholysis of cellulose to ethyl levulinate

    by O. Pertko, Yu. Voloshyna, T. Tkachenko, D. Kamenskyh, V. Yevdokymenko, V. Povazhnyi

    This study investigates the critical role of carbon catalyst surface architecture in the direct ("onepot") ethanolysis of microcrystalline cellulose to ethyl levulinate. Three sulfonated carbon matrices were synthesized and evaluated: pristine graphite, nanostructured mesoporous graphite obtained via thermal exfoliation, and amorphous micro/mesoporous hemp hurd-derived biochar. The materials were characterized using XRD, SEM, and nitrogen adsorption-desorption, while the density of grafted -SO3H groups was quantified via Boehm titration. Catalytic testing revealed that the efficiency of the solid-solid system is primarily governed by the surface morphology and pore size rather than the amount of -SO3H group. The pristine graphite sample exhibited the lowest ethyl levulinate yield due to its dense, non-porous structure, which minimizes the effective reactant contact area. Despite possessing a specific surface area comparable to nanostructured graphite, the amorphous biochar showed poor activity because its narrow micropores physically restrict the diffusion of bulky cellulose macromolecules. In contrast, the nanostructured graphite demonstrated the highest catalytic activity (achieving at a 20 mg/mL cellulose-to-ethanol ratio a maximum yield of ~15% in comparison with 1% and 2.4% for the graphite and biochar samples, respectively). Its exfoliated, mesoporous network successfully overcomes diffusion limitations, providing unhindered access of the solid substrate to the active acid sites. These findings demonstrate that the nanostructuring of crystalline graphite is a highly effective strategy for designing efficient solid acid catalysts for biomass valorization.

  • Open Access

    Influence of miscanthus species on structural and morphological features of obtained microcrystalline cellulose

    by T.V. Tkachenko, O.O. Haidai, B.V. Korinenko, D.S. Kamenskyh, M.M. Baran, V.A. Povazhny, S.P. Starik, V.A. Bohatyrenko, V.V. Bratishko, V.O. Yevdokymenko

    Miscanthus shows great potential for producing cellulosic materials due to its high yield and low cultivation requirements. This fast-growing perennial grass can serve as an alternative raw material, replacing traditional wood. Research conducted abroad has indicated that the original Miscanthus species affects the quality of the final product; however, similar studies on domestic varieties are lacking. Our study aimed to obtain microcrystalline cellulose (MCC) from different Miscanthus species, found their physicochemical characteristics, and compare them. We used air-dried Giant miscanthus (Miscanthus giganteus), Chinese miscanthus (Miscanthus sinensis), and Sugar miscanthus (Miscanthus sacchariflorus), which are considered technical crops. The composition of these species was as follows: cellulose content of 46.0, 44.8, and 42.2 %; hemicellulose content of 23.2, 28.3, and 27.2 %; lignin content of 14.2, 11.5, and 10.8 %; and ash content of 2.8, 4.1, and 6.7 %, respectively. To produce microcrystalline cellulose, the Miscanthus species underwent organo-solvent cooking. We studied the structure and morphology of the resulting MCC using various methods, including X-ray diffraction (XRD), X-ray fluorescence (XRF), Fourier-transform infrared spectroscopy with attenuated total reflectance (FTIR-ATR), and atomic force microscopy (AFM). The results indicated that MCC was successfully obtained from Giant miscanthus, Chinese miscanthus, and Sugar miscanthus, with yields of 95.9, 95.4, and 95.2 %, respectively, using the organo-solvent cooking method. The final product was a white, tasteless, and odourless substance with the following organic components: 95.8, 94.0, and 90.9 % (including 97.7, 96.4, and 97.8 % cellulose, as well as 2.3, 3.6, and 2.2 % lignin). The inorganic components accounted for 4.2, 6.0, and 9.1 % (including 96.1, 69.9, and 95.3 % SiO2, respectively). The XRD method confirmed the presence of a crystalline structure in the obtained MCC, with calculated crystallinity indexes of 0.73, 0.68, and 0.60. The FTIR-ATR spectra revealed typical functional groups associated with MCC and pure silicon dioxide at wavenumbers of 1148–1144, 901–898, and 450–414 cm–1. Furthermore, AFM analysis demonstrated that the particles were nanoscale in size. All MCC samples exhibited a striped texture characterised by nearly parallel and linear stripes. Notably, the MCC derived from Sugar miscanthus displayed a partially globular surface relief.

  • Nanoporous Carbon Formation Under Alkali Thermochemolysis of High-Ash Lignin

    by Volodymyr Kucherenko, Vitalii Yevdokymenko, Yuliia Tamarkina, Tetiana Tkachenko, Dmytro Kamenskyh, Аnastasiia Redko, Volodymyr Povazhny

  • Influence of Vibration-Acoustic Oscillations’ Application Duration on the Physical and Chemical Properties of the SNM-U Catalyst

    by Mariia Baran, Tetiana Tkachenko, Dmytro Kamenskyh, Viktor Burdeinyi, Volodymyr Povazhnyi, Vitalii Yevdokymenko

  • Carbon Materials Derived from Domestic Industrial Hemp Hurd

    by Bohdan Korinenko, Vladyslav Sokol, Tetiana Tkachenko, Dmytro Kamenskyh, Olha Haidai, Volodymyr Povazhnyi, Mariia Baran, Serhii Ruban, Vitalii Yevdokymenko

  • Investigation of oxidation–reduction processes of nickel hydroxide precipitation and their carbothermical reduction

    by Viktoriia Bohatyrenko, Dmytro Kamenskyh, Maarif Jafarov, Tetiana Tkachenko, Vitalii Yevdokymenko

    Most of the known methods for the chemical production of nickel nano- and microparticles, nickel oxides and hydroxides use various reducing agents and solvents, which are often toxic to the environment. As a rule, these methods are energy-consuming, lengthy and multi-stage, requiring complex equipment. Therefore, the development of a simple and “green” process for the synthesis of nickel-containing particles, including those with magnetic properties, remains one of the priority tasks. In this paper, a new physicochemical method for oxidation–reduction contact deposition of nickel(II) hydroxide nano–microparticles on the surface of magnesium particles from aqueous solutions of nickel-containing electrolyte is proposed. This method is based on the local corrosion of microgalvanic cells’ formation with predominant hydrogen depolarization. The proposed method was used to obtain nickel(II) hydroxide samples and study their morphology using SEM, as well as their phase composition using XRD analysis. It has been proven that the shape and structure of the resulting Ni(OH)2 particles depend on the contact deposition conditions: depending on the surface state of the magnesium particles as a reducing agent, it is possible to obtain both plate-shaped α/β-Ni(OH)2 particles and three-dimensional β-Ni(OH)2 “flowers” with different degrees of crystallinity.

  • Open Access

    Physico-chemical characteristics of microcrystalline cellulose from switchgrass (Panicum virgatum L.) obtained in the presence of a solid catalyst

    by V.P. Kukhar Institute of Bioorganic Chemistry and Petrochemistry of National Academy of Sciences of Ukraine, T. V. Tkachenko, O. O. Haidai, D. S. Kamenskyh, Y. V. Sheludko, O. V. Pavliuk, V. O. Yevdokymenko

    The main idea of this work is the investigation of structural and morphological characteristics of microcrystalline cellulose with switchgrass (Panicum virgatum L.) by the method of organo-solvent cooking with the addition of various brands of ion-exchange resins instead of sulfuric acid. A sulfonated copolymer of styrene and divinyl benzene with two functional groups per ring - Purolite CT-275 and a sulfonated copolymer based on tetrafluoroethylene - Nafion NR-50 were chosen as initial ion exchange resins. Air-dry switchgrass (Panicum virgatum L.), a technical culture, was used for the research. Microcrystalline cellulose (MCC) was obtained from it by the method of organo-solvent cooking with the addition of a solid catalyst. Using the methods of XRD, FTIR-ATR, AFM, TGA and DSC, the structure and morphology of MCC were studied. It is found that the use of ion-exchange resins in the organo-solvent method of obtaining MCC in a batch reactor requires the use of protective covers for the catalyst to avoid its mechanical damage. It has been found that only sulfonated copolymers based on tetrafluoroethylene are stable in the cooking solution, in contrast to sulfonated copolymers of styrene and divinylbenzene, and allow obtaining MCC from millet with a yield of 53 % versus 40 % for the classical method and a degree of polymerization of 440 versus 578, respectively. Due to the destruction of amorphous binders in the MCC’s from switchgrass (Panicum virgatum L.), regardless of the conditions of its production, we observe further ordering of the structure of the obtained MCC which is expressed in narrower and more intense peaks in the range 2θ = 22–23°. The FTIR-ATR method showed that the obtained MCC has functional groups similar to commercial M-1021. The AFM method showed that MCC has a globular and wavy relief. Surface roughness with globular relief is 12.6 nm.


  • Open Access

    Sustainable processing of lignocellulosic biomass

    by T V Tkachenko, M D Aksylenko, D S Kamenskyh, V O Yevdokymenko

    Biomass gasification is one of the effective methods of obtaining electrical and thermal energy. Thermal gasification is a simple and effective method for most lignocellulosic waste. The generation of combustible gases under such conditions has significant prospects both in the national economy and in a number of chemical-technological processes. The high-ash carbon residue remaining after thermolysis has shown its effectiveness as one of the important components of organo-mineral fertilizers. The results of field research in 2018-2019 with Moskito corn hybrid (Zea mays L.) and Mulan winter wheat F2 hybrid (Triticum aestivum L.) on dark-gray podzolic soil confirmed the high agrochemical efficiency of our proposed fertilizers. The introduction of Moskito corn hybrid organo-mineral fertilizer into the nutrition system improved the structural indicators of the harvest: in the experiment, the 1000 grains weight increased by 14.7%, the mass of grain from one cob – by 20% compared to the control. Balanced nutrition of experimental plants Mulan winter wheat F2 hybrid in the variant with the use of BG-II when sowing at a dose of 1t/ha and favourable weather conditions led to an increase in grain quality (protein content) to the 2nd class – 13.0% against the 3rd grade in control (12.2%).


  • Influence of ratio of silicon complex and coagulant on silicon dioxide physicochemical characteristics

    by Dmytro Kamenskyh, Tetiana Tkachenko, Lokman Hakan Tecer, Yevgenii Sheludko, Volodymyr Povazhny, Maarif Jafarov, Vitalii Yevdokymenko


  • Open Access

    Structural and morphological features of microcrystalline сellulose from soybean straw by organosolvent treatment

    by V.P. Kukhar Institute of Bioorganic Chemistry and Petrochemistry of National Academy of Sciences of Ukraine, T. V. Tkachenko, D. S. Kamenskyh, Y. V. Sheludko, V. O. Yevdokymenko

    The main idea of this work is to study the possibility of obtaining microcrystalline cellulose from multi-ton and low-value agricultural waste and investigation its structural properties. Air-dry soybean straw, an agricultural waste, was used for the research. Microcrystalline cellulose (MCC) was obtained from it by the method of organo-solvent cooking. Using the methods of XRD, XRF, FTIR-ATR, AFM, TGA and DSC, the structure and morphology of MCC were studied. It is found that increasing the hydromodule reduces the content of lignin and inorganic components. At the same time, both the yields of the MCC and its qualitative characteristics are declining. First of all, the crystallinity index of the MCC decreases with the increasing amount of the liquor ration. The band corresponded to symmetric CH2 bendings at 1435–1429 cm–1, that is known as the crystallinity band, decreased with increasing amount of the liquor ration. The AFM method shows that when forming the surfaces of MCC 10 particles, not only groups of particles are formed, the heights of the elements of which range from 23.8–28.1 to 16.9–26.8 nm, but also elongated units on the surface of which there are individual particles. The surface roughness is 1.6 nm. At the same time, the surface of the MCC 15 has a surface roughness Ra = 3.1 nm. The particles are distributed throughout the scan, with no clusters of particles and their agglomerates, and their heights are 14.4; 18.7; 20.6; 17.4 and 23.9; 18.1; 24.7 nm. 3D image of the particles showed that the particles are pyramids of different configurations similar to the particles in the MCC 10. It should be noted that the range of depressions and heights characteristic of MCC 15 is much smaller (from –13 to +20.7 nm) than in the MCC 10 (from –17.5 to 45.5 nm).