De Sun
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
De Sun has a total of 76 co-authors. Here are the top co-authors by number of shared publications:
Bingbing Li
7 shared publicationsDongmin Yue
7 shared publicationsJingtong Yu
School of Chemical Engineering Changchun University of Technology 2055 Yanan Street Changchun China
6 shared publicationsYanxia Ge
School of Chemical Engineering Changchun University of Technology 2055 Yanan Street Changchun 130012 P. R.China
6 shared publicationsWenjing Tang
5 shared publicationsBojun Li
4 shared publications
Latest Publications
- 21 February 2026
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 42 (8) , 6426-6435
Electroless Plating Preparation of Biomimetic Nickel-Black/Graphene Membranes for Solar-Driven Interfacial Evaporation
Solar-driven interfacial evaporation offers a promising approach to efficient photothermal conversion. Inspired by the efficient light-trapping effect property observed in the textured bark of the Sophora japonica tree, this study successfully developed a bark-like, hierarchical nickel-black/graphene photothermal conversion membrane (E-Ni/Gr) via electroless plating. The hierarchical architecture contributes to light entrapment, while the synergistic effect between the intrinsic semiconductor absorption bandgap and the broadband absorption of the carbon component jointly enhances optical absorption, achieving an absorption efficiency of 83.21%. Under 1 kW·m-2 irradiation, the evaporation rate of E-Ni/Gr-20 (adding 20 mL of graphene suspension solution) reached 1.62 kg·m-2·h-1, with a photothermal conversion efficiency of 91.25%. The membrane also presented remarkable stability (maintaining an evaporation rate of 1.3 kg·m-2·h-1 after 20 cycles) and desalination performance (NaCl rejection >99%). This study offers valuable perspectives for the development of efficient and stable bioinspired photothermal materials.
- 21 February 2026
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 42 (8) , 6426-6435
Electroless Plating Preparation of Biomimetic Nickel-Black/Graphene Membranes for Solar-Driven Interfacial Evaporation
Solar-driven interfacial evaporation offers a promising approach to efficient photothermal conversion. Inspired by the efficient light-trapping effect property observed in the textured bark of the Sophora japonica tree, this study successfully developed a bark-like, hierarchical nickel-black/graphene photothermal conversion membrane (E-Ni/Gr) via electroless plating. The hierarchical architecture contributes to light entrapment, while the synergistic effect between the intrinsic semiconductor absorption bandgap and the broadband absorption of the carbon component jointly enhances optical absorption, achieving an absorption efficiency of 83.21%. Under 1 kW·m-2 irradiation, the evaporation rate of E-Ni/Gr-20 (adding 20 mL of graphene suspension solution) reached 1.62 kg·m-2·h-1, with a photothermal conversion efficiency of 91.25%. The membrane also presented remarkable stability (maintaining an evaporation rate of 1.3 kg·m-2·h-1 after 20 cycles) and desalination performance (NaCl rejection >99%). This study offers valuable perspectives for the development of efficient and stable bioinspired photothermal materials.
- 24 September 2025
- Published by Elsevier in Journal of Membrane Science
- Vol. 738
Black@ZnO/Gr modified carbon fiber self-cleaning membrane for Resource Disposal of degreasing wastewater
- 24 September 2025
- Published by Elsevier in Journal of Membrane Science
- Vol. 738
Black@ZnO/Gr modified carbon fiber self-cleaning membrane for Resource Disposal of degreasing wastewater
Electrochemical Preparation of Graphene Membrane for Continuous Water Vapor and Crystalline Salt Production
Graphene has high application value in photothermal conversion fields because of the thinness, ultra‐lightness, and excellent photothermal properties. However, the traditional methods for preparing commercial graphene were less efficient and more expensive. Herein, the graphene suspensions were prepared using a convenient and environmentally friendly electrochemical exfoliation method. The graphene photothermal conversion (E‐GR) membranes were obtained to investigate the effect of electrochemical preparation conditions on the photothermal conversion performance. The evaporation rate of E‐GR membrane was 1.267 kg m−2 h−1 under 1 sun, achieving a solar‐to‐steam conversion efficiency of 79.65%. In the continuous salt crystallization experiment, the E‐GR membrane achieved desalination and uninterrupted fresh water and salt production for 7 days, resulting in the generation of 23.451 kg m−2 d−1 fresh water and 0.654 kg m−2 d−1 crystalline salt. During this period, the crystalline salt was formed only at the edges with no obvious crystallization on the surface. Because of the characteristic that graphene can provide a large number of adsorption sites, combined with the capillary action of filter paper, the membrane can be wetted in a short time. Overall, this simple, cost‐effective and efficient preparation method greatly promotes the application of graphene in the field of seawater desalination.
Electrochemical Preparation of Graphene Membrane for Continuous Water Vapor and Crystalline Salt Production
Graphene has high application value in photothermal conversion fields because of the thinness, ultra‐lightness, and excellent photothermal properties. However, the traditional methods for preparing commercial graphene were less efficient and more expensive. Herein, the graphene suspensions were prepared using a convenient and environmentally friendly electrochemical exfoliation method. The graphene photothermal conversion (E‐GR) membranes were obtained to investigate the effect of electrochemical preparation conditions on the photothermal conversion performance. The evaporation rate of E‐GR membrane was 1.267 kg m−2 h−1 under 1 sun, achieving a solar‐to‐steam conversion efficiency of 79.65%. In the continuous salt crystallization experiment, the E‐GR membrane achieved desalination and uninterrupted fresh water and salt production for 7 days, resulting in the generation of 23.451 kg m−2 d−1 fresh water and 0.654 kg m−2 d−1 crystalline salt. During this period, the crystalline salt was formed only at the edges with no obvious crystallization on the surface. Because of the characteristic that graphene can provide a large number of adsorption sites, combined with the capillary action of filter paper, the membrane can be wetted in a short time. Overall, this simple, cost‐effective and efficient preparation method greatly promotes the application of graphene in the field of seawater desalination.
- 22 July 2024
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 24 (30) , 9253-9261
One-Step Electrochemically Prepared Bionic Hierarchical Nickel Black@Graphene Composite Membrane for Desalination by Solar–Thermal Energy Conversion
Ingenious microstructure construction and appropriate composition selection are effective strategies for achieving enhanced performance of photothermal materials. Herein, a broccoli-like hierarchical nickel black@graphene (Ni@Gr) membrane for solar-driven desalination was prepared by a one-step electrochemical method, which was carried out simultaneously with the electrochemical exfoliation of graphene and the co-deposition of Ni@Gr material. The bionic hierarchical structure and the chemical composition of the Ni@Gr membrane increased the sunlight absorption (90.36%) by the light-trapping effect and the introduction of graphene. The Ni@Gr membrane achieved high evaporation rates of 2.05 and 1.16 kg m-2 h-1 under simulated (1 sun) and outdoor sunlight conditions, respectively. The superhydrophilicity and the hierarchical structure of the Ni@Gr membrane jointly reduced the evaporation enthalpy (1343.6 kJ/kg), which was beneficial to break the theoretical limit of the evaporation rate (1.47 kg m-2 h-1). This work encourages the application of bionic metal-carbon composite photothermal materials in solar water evaporation.
- 22 July 2024
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 24 (30) , 9253-9261
One-Step Electrochemically Prepared Bionic Hierarchical Nickel Black@Graphene Composite Membrane for Desalination by Solar–Thermal Energy Conversion
Ingenious microstructure construction and appropriate composition selection are effective strategies for achieving enhanced performance of photothermal materials. Herein, a broccoli-like hierarchical nickel black@graphene (Ni@Gr) membrane for solar-driven desalination was prepared by a one-step electrochemical method, which was carried out simultaneously with the electrochemical exfoliation of graphene and the co-deposition of Ni@Gr material. The bionic hierarchical structure and the chemical composition of the Ni@Gr membrane increased the sunlight absorption (90.36%) by the light-trapping effect and the introduction of graphene. The Ni@Gr membrane achieved high evaporation rates of 2.05 and 1.16 kg m-2 h-1 under simulated (1 sun) and outdoor sunlight conditions, respectively. The superhydrophilicity and the hierarchical structure of the Ni@Gr membrane jointly reduced the evaporation enthalpy (1343.6 kJ/kg), which was beneficial to break the theoretical limit of the evaporation rate (1.47 kg m-2 h-1). This work encourages the application of bionic metal-carbon composite photothermal materials in solar water evaporation.
- 21 July 2024
- Published by Wiley in ChemistrySelect
- Vol. 9 (28)
Asymmetric PDMS/PVDF Pervaporation Membrane for Separation of Ethanol/Water System
Preparing asymmetric pervaporation membranes is a kind of promising method to enhance pervaporation membrane flux. Hydrophobic PVDF polymer can be used to prepare asymmetric pervaporation membranes, but its separation factor is relatively low. In this work, to improve the performance of PVDF membrane pervaporation, PDMS polymer was added to the PVDF membrane, and asymmetric PDMS/PVDF permeable membranes were prepared by the non‐solvent induced phase separation (NIPS) method. The effects of mass ratios of PDMS to PVDF on the membrane structures and the membrane properties were characterized by SEM, XRD, FTIR, TGA, water contact angle and mechanical strength. The results showed that the ratios of the PDMS: PVDF affect its phase‐separation behavior. As the addition of PDMS increased, the finger‐like pores on the membrane section gradually became longer, the upper surface changed from less porous to porous structure, and the lower surface structure changed from interconnected flocculent structure to porous, and the best structure of the blend membrane was achieved when the PDMS: PVDF mass ratio was 1 : 5. Therefore, the membrane had the best separation performance in separating 15 wt. % ethanol aqueous solution with a permeate total flux of 273.65 g/(m 2 h) and a separation factor of 9.09 when the mass ratio of PDMS: PVDF was 1 : 5.
- 21 July 2024
- Published by Wiley in ChemistrySelect
- Vol. 9 (28)
Asymmetric PDMS/PVDF Pervaporation Membrane for Separation of Ethanol/Water System
Preparing asymmetric pervaporation membranes is a kind of promising method to enhance pervaporation membrane flux. Hydrophobic PVDF polymer can be used to prepare asymmetric pervaporation membranes, but its separation factor is relatively low. In this work, to improve the performance of PVDF membrane pervaporation, PDMS polymer was added to the PVDF membrane, and asymmetric PDMS/PVDF permeable membranes were prepared by the non‐solvent induced phase separation (NIPS) method. The effects of mass ratios of PDMS to PVDF on the membrane structures and the membrane properties were characterized by SEM, XRD, FTIR, TGA, water contact angle and mechanical strength. The results showed that the ratios of the PDMS: PVDF affect its phase‐separation behavior. As the addition of PDMS increased, the finger‐like pores on the membrane section gradually became longer, the upper surface changed from less porous to porous structure, and the lower surface structure changed from interconnected flocculent structure to porous, and the best structure of the blend membrane was achieved when the PDMS: PVDF mass ratio was 1 : 5. Therefore, the membrane had the best separation performance in separating 15 wt. % ethanol aqueous solution with a permeate total flux of 273.65 g/(m 2 h) and a separation factor of 9.09 when the mass ratio of PDMS: PVDF was 1 : 5.
- 5 June 2024
- Published by Elsevier in Journal of Membrane Science
- Vol. 706
CuMOF functionalized PVDF membrane with hierarchical structure for photothermal vacuum membrane distillation
- 5 June 2024
- Published by Elsevier in Journal of Membrane Science
- Vol. 706
CuMOF functionalized PVDF membrane with hierarchical structure for photothermal vacuum membrane distillation