GHGerlinde Habler

Gerlinde Habler

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Gerlinde Habler has a total of 87 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Combining universal‐stage, backscatter electron imaging and electron backscatter diffraction for improved indexing of planar microstructures in quartz and plagioclase

    by Lidia Pittarello, Thomas Griffiths, Gerlinde Habler

    Quartz and feldspar commonly develop planar microstructures due to shock metamorphism. These are generally investigated and indexed (identifying the crystallographic orientation along which they developed) using a universal stage (U‐stage) on a petrographic microscope. However, the U‐stage method alone can sometimes prove insufficient for correct indexing, for example, due to the size of microstructural features, or challenging, in the case of low symmetry minerals. Neither backscatter electron (BSE) imaging nor electron backscatter diffraction (EBSD) analysis can solve this problem individually for a flat surface, as both methods are limited to providing 2‐D microstructural information. We propose a method combining contributions from U‐stage, BSE imaging and EBSD. The combination and plotting of crystallographic orientation (from EBSD), U‐stage measurements of planes and directions, and traces of planar microstructures (from BSE images) in a single reference frame allows the identification of the most probable orientations of features that could not be indexed by applying any single technique. The applicability and limitations of the proposed method were tested on selected shocked quartz and feldspar grains. The method proved to be successful and could be applied to study any 3‐D planar features suspected to be aligned with crystallographic planes of an optically transparent host material.

  • Open Access

    Architecture-driven deformation and fracture behavior of nanolamellar TiN/Nb coatings

    by S. Kagerer, N. Koutná, L. Zauner, T. Wojcik, G. Habler, H. Riedl, P.H. Mayrhofer, R. Hahn


  • Open Access

    Variations in orientation relationships between rutile inclusions and garnet host relate to magmatic growth zoning

    by Victoria Kohn, Thomas A. Griffiths, Taisia Alifirova, Nina Daneu, Olga Ageeva, Rainer Abart, Gerlinde Habler

    Rutile inclusions in almandine-spessartine garnet from a peraluminous pegmatoid from the Moldanubian zone (Bohemian Massif, AT) show distinct changes in aspect ratio, shape preferred orientations (SPO) and crystallographic orientation relationships (COR) along the transition between microstructurally different growth zones in the garnet core and rim. For identification of the COR characteristics we pool specific CORs based on their common axial relationship into three COR groups: Group 103R/111G, Group 001R/111G and Group 001R/100G. The rutile inclusions in the garnet core domains are elongated along the four Grt $$\langle$$ ⟨ 111 $$\rangle$$ ⟩ directions and are dominated by COR Group 103R/111G. The garnet rim zone additionally contains rutile needles elongated along Grt $$\langle$$ ⟨ 100 $$\rangle$$ ⟩ . Here, Group 001R/111G and 001R/100G are more abundant than in the garnet core. Needle-shaped rutile in the rim shows a systematic correlation between SPOs and CORs as needles elongated parallel to Grt $$\langle$$ ⟨ 111 $$\rangle$$ ⟩ are dominated by Group 103R/111G and 001R/111G, whereas those needles elongated parallel to Grt $$\langle$$ ⟨ 100 $$\rangle$$ ⟩ exclusively pertain to CORs of 001R/100G. Furthermore, the frequency of each particular SPO in the garnet rim clearly depends on the local growth direction of the particular Grt{112} sector. Facet-specific variations in rutile SPO frequencies in different sectors and growth zones of garnet were observed even between equivalent directions, indicating that the microstructures and textures of rutile inclusions reflect varying parameters of garnet growth. The characteristic differences in COR groups of different garnet growth zones are referred to compositional changes in the bulk melt or compositional boundary layer, associated with magmatic fractional crystallisation.


  • Open Access

    Crystal Structure Controls on Oriented Primary Magnetite Micro-Inclusions in Plagioclase From Oceanic Gabbro

    by Ge Bian, Olga Ageeva, Vladimir Roddatis, Chen Li, Timothy J Pennycook, Gerlinde Habler, Rainer Abart

    Oriented needle-, lath- and plate-shaped magnetite micro-inclusions in rock forming plagioclase from mafic intrusive rocks, were investigated using correlated optical microscopy and scanning transmission electron microscopy. The magnetite micro-inclusions were analysed on cuts parallel and perpendicular to the inclusion–elongation directions. The crystal structures of the two phases are in direct contact along the interfaces. The shape, shape orientation and crystallographic orientation relationships between the magnetite micro-inclusions and the plagioclase host appear to be controlled by the tendency of the system to optimise lattice match along the interfaces. The elongation direction of the inclusions ensures good match between prominent oxygen layers in the magnetite and plagioclase crystal structures across the interfaces bounding the inclusions parallel to their elongation direction. In cross-section, additional modes of lattice match, such as the commensurate impingement of magnetite and plagioclase lattice planes along the interfaces, the parallel alignment of the interfaces to low-index lattice planes of magnetite or plagioclase, or the parallel alignment to low index lattice planes of both phases are observed, which appear to control the selection of interface facets, as well as the shape and crystallographic orientation relationships between magnetite micro-inclusions and plagioclase host. The systematics of the inclusion cross-sectional shapes and crystallographic orientation relationships indicate recrystallisation of magnetite with potential implications for natural remanent magnetisation of magnetite-bearing plagioclase grains.


  • Open Access

    Microstructure and Texture of a Spinel Corona Around a Basalt Hosted Corundum Xenocrystal

    by Roman Schuster, Lisa Tiede, Olga Ageeva, Thomas A Griffiths, Rainer Abart, Gerlinde Habler

    The microstructural and textural characteristics of a spinel corona that formed around a faceted corundum xenocrystal by reaction with the hosting basaltic melt in the Siebengebirge volcanic field demonstrate that the crystallographic and shape preferred orientation of spinel is influenced by the orientation of the reaction interface with respect to the corundum crystal lattice. The spinel roughly shows the common topotactic orientation relationships with corundum, where one of the {111}Spl planes is parallel to the (0001)Crn plane, and three of the {110}Spl planes are parallel to the {1010}Crn planes. In detail, there are subtle but systematic deviations from this topotactic relationship due to small rotations about the c-axis and/or an a-axis of corundum. The former is observed when the corundum c-axis is closely parallel to the interface plane, while the latter require a corundum a-axis orientation perpendicular to the interface. In this case, the preferred sense of rotation depends on the sign of the a-axis direction, irrespective of the spinel growth direction being parallel or antiparallel to this axis. Additionally, the selection of either one or both of two spinel twin variants that equally fulfill the topotactic orientation relationship depends on the orientation of the corundum-spinel interface with respect to the lattices of both the corundum and the spinel. Finally, also the grain boundary character is controlled by the interface orientation and the corundum lattice. Despite the differences between corona segments, the nature of these textures are persistent along and across each segment. We emphasize that all these microstructural and textural features are ascribed to the period of spinel growth in magmatic environment. The extent to which prominent slip planes in spinel are aligned parallel with the corundum-spinel interface seems to be of crucial importance for the nature of the spinel texture and microstructure, indicating that the activity of dislocations pertaining to these slip systems ease the accommodation of lattice misfit across the corundum-spinel interface. By comparison with experimentally grown spinel layers we infer predominantly interface reaction controlled growth of the studied spinel corona.


  • Open Access

    The metabasites from the Texel Unit (Austroalpine nappe stack): markers of Cretaceous intracontinental subduction and subsequent collision

    by Peter Tropper, Martina Tribus, Hannah Pomella, Gerlinde Habler

    Eclogites in the Texel Unit (Austroalpine nappe stack; Eastern Alps, South Tyrol, Italy) represent the westernmost out-crops of the E-W striking Eoalpine High-Pressure Belt (EHB). East of the Tauern Window, the EHB forms part of a Cretaceous intracontinental south-dipping subduction/collision zone. The impetus of this contribution is to extend the geothermo-barometric data of the eclogites from the EHB using conventional geothermobarometry and multi-equilibrium calculations as well as Zr-in-rutile/titanite geothermometry and to put the P - T results of eclogites and amphibolites from the Texel Unit into the geodynamic framework. The investigated samples of this study are from the Spronser- and the Saltaus valleys (S-Tyrol) in the Austroalpine Texel Unit. The Texel Unit is composed mainly of paragneisses with minor intercalations of micaschists, orthogneisses, amphibolites and subordinately eclogites. The amphibolites from the Spronser valley contain the mineral assemblage amphibole + plagioclase + garnet + clinozoisite/epidote + quartz + titanite ± ilmenite ± rutile ± apatite ± calcite. Chemical zoning in plagioclase and amphibole shows two main growth stages: an older P -dominated stage (e.g. albite and barroisite cores) and a younger amphibolite-facies stage. The core of the amphiboles shows barroisite composition, the rim can be chemically classified as hornblende, edenite, tschermakite and pargasite. Geothermobarometric calculations with multi-equilibrium geothermobarometry (THERMOCALC v.3.21) yield temperatures of 600–654°C and pressures of 0.98–1.17 GPa for the same samples. The eclogites from the Saltaus valley contain the peak mineral assemblage omphacite + amphibole + garnet + clinozoisite/epidote + muscovite + quartz + titanite ± ilmenite ± rutile. Thermobarometric calculations, were performed in the system CaO-FeO-MgO-Na 2 O-Al 2 O 3 -FeO-SiO 2 -H 2 O with the assemblage clinopyroxene + garnet + amphibole + clinozoisite/epidote + muscovite + quartz ± H 2 O. The calculations involved an H 2 O-absent invariant point (mode-1 calculation) as well as two types of average P - T mode-2 calculations. The obtained average P - T H 2 O-absent mode 1 P - T conditions are 1.89 ± 0.18 GPa and 578 ± 60°C. Using the average P - T mode-2 two types of calculations were done: (1) calculations without amphiboles but with H 2 O present, which yield mean P - T conditions of 1.95 ± 0.28 GPa and 601 ± 55°C and (2) calculations with amphiboles but without H 2 O, which yield mean P - T conditions of 1.95 ± 0.26 GPa and 666 ± 77°C. Calculations using THERMOCALC v.3.33 yield similar results with slightly higher pressures of 0.3 GPa. Based on the present geothermobarometric data in conjunction with available mineral ages the eclogites represent the Eoalpine intracontinental subduction stage whereas the amphibolites reflect the subsequent, P-accentuated stage of decompression associated with the subsequent Eoalpine collisional stage.


  • Open Access

    Evolution of chemically induced cracks in alkali feldspar: thermodynamic analysis

    by Rainer Abart, Elena Petrishcheva, Gerlinde Habler, Christoph Sutter, Franz Dieter Fischer, Jozef Predan, Marko Kegl, Franz G. Rammerstorfer

    A system of edge cracks was applied to polished (010) surfaces of K-rich gem-quality alkali feldspar by diffusion-mediated cation exchange between oriented feldspar plates and a Na-rich NaCl–KCl salt melt. The cation exchange produced a Na-rich layer at and beneath the specimen surface, and the associated strongly anisotropic lattice contraction lead to a tensile stress state at the specimen surface, which induced fracturing. Cation exchange along the newly formed crack flanks produced Na-enriched diffusion halos around the cracks, and the associated lattice contraction and tensile stress state caused continuous crack growth. The cracks nucleated with non-uniform spacing on the sample surface and quickly attained nearly uniform spacing below the surface by systematic turning along their early propagation paths. In places, conspicuous wavy cracks oscillating several times before attaining their final position between the neighboring cracks were produced. It is shown that the evolution of irregularly spaced towards regularly spaced cracks including the systematic turning and wavyness along the early propagation paths maximizes the rate of free energy dissipation in every evolutionary stage of the system. Maximization of the dissipation rate is suggested as a criterion for selection of the most probable evolution path for a system undergoing chemically induced diffusion mediated fracturing in an anisotropic homogeneous brittle material.


  • Open Access

    Ferromagnetism of magnetite-bearing plagioclase from oceanic gabbro

    by Olga Ageeva, Stuart Gilder, Gerlinde Habler, Rainer Abart

    Oriented needle shaped magnetite inclusions in plagioclase may give rise to magnetic anisotropy of individual plagioclase grains and, in case of preferred orientation of the plagioclase grains, contribute to magnetic anisotropy of the bulk-rock. Understanding how oriented magnetite inclusions generate magnetic fabrics in single grains of plagioclase is important for interpreting rock magnetic fabrics and for correcting paleomagnetic data. Plagioclase grains from oceanic gabbro dredged at the Mid Atlantic Ridge (11-17°N) were analyzed using optical microscopy, electron backscatter diffraction (EBSD), as well as alternating field demagnetization and anisotropy of magnetic remanence (AMR) measurements to investigate the influence of the shape orientation distribution of acicular magnetite inclusions on the magnetic properties of magnetite bearing plagioclase grains.In pristine magmatic plagioclase, the needle elongation directions form a 30° wide girdle distribution parallel to the pl(010) plane. This girdle distribution is insensitive to twinning after the Albite, Pericline, Carlsbad and Manebach laws. The statistical maximum in the inclusion orientation lays in the pl(010) plane, closely parallel to the pl[001] direction. The overall shape orientation distribution of the magnetite inclusions produces a triaxial magnetic anisotropy ellipsoid with the minimum axis direction sub-perpendicular to the pl(010) plane and the maximum axis sub-parallel to the pl[001] direction.The vector of natural remanent magnetization parallels the maximum AMR axis direction indicating that the magnetic anisotropy caused by the magnetite inclusion fabric controls the paleomagnetic signature. In hydrothermally modified plagioclase, most or all magnetite needles are oriented parallel to the pl[001] direction and a prolate rotational ellipsoid of remanent magnetization with the maximum remanent magnetization parallel to pl[001] should occur.Plagioclase-hosted magnetite inclusions are particularly stable recorders of the paleomagnetic filed. The magnetic anisotropy arising from the anisotropic shape orientation distribution of the magnetite inclusions may, however, bias the magnetic record, an effect that needs to be accounted for in paleomagnetic reconstructions or for absolute paleointensity experiments.This work was supported by the Austrian Science Fund (FWF): I 3998-N29, and by the Russian Foundation for Basic Research, Grant no. 18-55-14003.

  • Open Access

    Oriented Magnetite Inclusions in Plagioclase: Implications for the Anisotropy of Magnetic Remanence

    by O. Ageeva, G. Habler, S. A. Gilder, R. Schuster, A. Pertsev, O. Pilipenko, G. Bian, R. Abart

    Micron to sub‐micron sized ferromagnetic inclusions in rock forming silicate minerals may give rise to particularly stable remanent magnetizations. When a population of inclusions have a preferred crystallographic or shape orientation in a rock, the recorded paleomagnetic direction and intensity may be biased by magnetic anisotropy. To better understand this effect, we investigated plagioclase grains from oceanic gabbro dredged from the Mid‐Atlantic Ridge at 11°–17°N. The plagioclase grains contain abundant needle and lath shaped magnetite inclusions aligned along specific directions of the plagioclase lattice. Electron back scatter diffraction and anisotropy of magnetic remanence measurements are used to correlate the orientation distribution of the magnetite inclusions in the host plagioclase that contains multiple twin types (Manebach, Carlsbad, Albite, and Pericline) with the bulk magnetic anisotropy of the inclusion‐host assembly. In non‐modified plagioclase, the anisotropy ellipsoid of magnetic remanence has oblate shapes that parallels the plagioclase (010) plane. It is suggested that recrystallization of magnetite inclusions during hydrothermal overprint shifts the relative abundance of the inclusions pertaining to the different orientation classes. We show that the maximum axis of the anisotropy ellipsoid of magnetic remanence parallels the plagioclase [001] direction, which in turn controls the recorded remanent magnetization direction. Our results are relevant for paleointensity and paleodirection determinations and for the interpretation of magnetic fabrics.


  • Open Access

    Oriented Magnetite Inclusions in Plagioclase: Implications for the Anisotropy of Magnetic Remanence

    by Olga Ageeva, Gerlinde Habler, Stuart A. Gilder, Roman Schuster, Alexey Pertsev, Olga Pilipenko, Ge Bian, Rainer Abart

    Micron to sub-micron sized ferromagnetic inclusions in rock forming silicate minerals may give rise to particularly stable remanent magnetizations. When a population of inclusions have a preferred crystallographic or shape orientation in a rock, the recorded paleomagnetic direction and intensity may be biased by magnetic anisotropy. To better understand this effect, we investigated plagioclase grains from oceanic gabbro dredged from the Mid-Atlantic Ridge at 11-17N. The plagioclase grains contain abundant needle and lath shaped magnetite inclusions aligned along specific directions of the plagioclase lattice. Electron back scatter diffraction and anisotropy of magnetic remanence measurements are used to correlate the orientation distribution of the magnetite inclusions in the host plagioclase that contains multiple twin types (Manebach, Carlsbad, Albite and Pericline) with the bulk magnetic anisotropy of the inclusion-host assembly. In unaltered plagioclase, the anisotropy ellipsoid of magnetic remanence has oblate shapes that parallels the plagioclase (010) plane. It is suggested that recrystallization of magnetite inclusions from hydrothermal alteration shifts the relative abundance of the inclusions pertaining to the different orientation classes. We show that the maximum axis of the anisotropy ellipsoid of magnetic remanence parallels the plagioclase [001] direction, which in turn controls the recorded remanent magnetization direction. Our results are relevant for paleointensity and paleodirection determinations and for the interpretation of magnetic fabrics.