GLGe Liang

Ge Liang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Ge Liang has a total of 35 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    A Model-Free Predictive Current Control-Based Fault-Tolerant Scheme for Dual Three-Phase PMSM Drives With Minimized Copper Loss

    by Wei Wang, Aowei Zheng, Mengdi Li, Ge Liang

    This paper presents a model-free predictive current control (MFPCC) strategy for dual three-phase permanent magnet synchronous motor (DTP-PMSM) drives that specifically aims to minimize copper losses during open-circuit faults through an optimized fault-tolerant control framework. For isolated-neutral-point configurations, the method derives optimal current references without low-order harmonic components, avoiding the need for model order reduction while preserving standard decoupling transformations. The integration of MFPPC with vector space decomposition (VSD) and dual space vector pulse width modulation (SVPWM) ensures precise current tracking in both normal and fault-tolerant operations, achieving enhanced parameter robustness by completely eliminating parameter uncertainty effects. Although conventional strategies impose sinusoidal currents to maintain torque, this constraint is suboptimal for copper loss minimization. This paper presents a theoretically-derived current reference formulation that achieves fundamental copper loss reduction for open-circuit fault conditions in DTP-PMSM drives systems. Through rigorous analytical derivation and experimental validation, the proposed fault-tolerant control scheme demonstrates superior performance compared to existing solutions for both phase-loss and open-switch faults in two-level voltage source inverter-fed DTP-PMSM drive systems, achieving significantly reduced copper losses while maintaining operational stability.


  • Advanced PWM Strategy for Neutral-Point Voltage Balancing and Switching Loss Reduction in Three-Level NPC Inverters

    by Minghui Wei, Ge Liang, Sheng Huang, Wu Liao, Qianhao Yang, Shoudao Huang

    Maintaining the balance of neutral-point voltage (NPV) is essential for the proper operation of three-level neutral-point-clamped (NPC) inverters. Conventional modulation strategies, such as space vector pulsewidth modulation and virtual space vector PWM (VSVPWM), fail to concurrently accomplish two objectives: balancing NPV across all modulation indexes and power factors (PFs), and maintaining low switching losses, thereby limiting their applicability. This article presents an extended virtual space vector PWM strategy designed to stabilize NPV under all operating conditions while simultaneously reducing switching losses. A new set of virtual voltage vectors, termed extended virtual voltage vectors (EVSVs), is introduced to ensure NPV balancing across all modulation indexes and PFs. Through the meticulous design of EVSV sequences, the switching count per switching cycle is maintained as low as that of SVPWM, thereby achieving lower switching losses compared to VSVPWM. The proposed approach demonstrates superior performances in terms of NPV regulation, switching loss reduction, and current distortion mitigation. Its effectiveness and advantages are validated through extensive simulations and experiments.


  • Sensorless Control of Multithree-Phase Permanent Magnet Synchronous Generator in Distributed Architecture

    by Mingcheng Lyu, Yutao Ding, Ge Liang, Fengxiang Wang, Sheng Huang, Wu Liao, Xuan Wu, Xiaoping Ouyang, Shoudao Huang

    The distributed architecture of a multithree-phase permanent magnet synchronous generator (MTP-PMSG) is extremely compact and requires interconnecting communication cables to transmit position information for decoupling control, significantly reducing fault tolerance. Moreover, sensorless control methods employed in distributed architecture suffer from significant position errors under power imbalance across windings. To address these issues, this article proposes a distributed sensorless control method for MTP-PMSG within the distributed architecture, which improves the accuracy of position estimation in both balanced and imbalanced power scenarios. First, the mathematical model of MTP-PMSG is derived from the distributed architecture without interconnection, serving as the foundation for the distributed sensorless control strategy. Then, an adaptive selective harmonic elimination filter with harmonic extractors is proposed to construct the distributed sensorless control, which overcomes the limitations of conventional sensorless strategies. The proposed approach effectively suppresses harmonic and dc components, compensates for phase delay, and mitigates back electromotive force (BEMF) attenuation, thereby enhancing the accuracy of rotor position estimation. Finally, the proposed method is experimentally validated on a dual three-phase PMSG platform, demonstrating improved rotor position estimation accuracy, enhanced dynamic response, and significantly reduced BEMF total harmonic distortion under both balanced and imbalanced operating conditions.

  • An Optimal PWM Method With Reduced Common-Mode Voltage and Current Ripple for Three-Phase Voltage-Source Inverter

    by Minghui Wei, Sheng Huang, Ge Liang, Wu Liao, Xuan Wu, Shoudao Huang

    Common-mode voltage (CMV) can cause various issues in applications, such as shaft voltage, leakage current, and electromagnetic interference (EMI). Active zero-state pulsewidth modulation (AZSPWM) is a classic and effective approach for mitigating CMV. However, this method compromises current quality, leading to undesirable CMV spikes and line-to-line voltage pulse reversals. In this article, an optimal AZSPWM (OP-AZSPWM) method is proposed to address these inherent issues in conventional AZSPWM. The proposed method utilizes the freedom of distributing the dwell times among four active vectors in conventional AZSPWM, and by optimizing the distribution, the current ripple is effectively reduced. In addition, an extra constraint is introduced to limit the minimum dwell time of the active vectors, thereby eliminating CMV spikes and pulse reversals. Comparative analysis against conventional AZSPWM demonstrates the superior performance of OP-AZSPWM in terms of current quality, CMV mitigation, and elimination of line-to-line voltage pulse reversals. Moreover, the proposed method can be easily implemented online using carrier-based modulation techniques. The effectiveness of the proposed method is validated through theoretical analysis, simulations, and experiments.


  • A Carrier Self-Synchronization Method for Distributed Control Units in Multithree-Phase Permanent Magnet Synchronous Motor

    by Wu Liao, Yongsen Tong, Sheng Huang, Ge Liang, Congqi Feng, Xuan Wu, Shoudao Huang

    The multithree-phase permanent magnet synchronous motor (MTP-PMSM) has garnered significant attention due to its advantages, including reduced torque oscillations, lower power rating per phase, and improved fault tolerance. The control architecture of MTP-PMSM can be categorized into a centralized and distributed structure depending on the number of controllers used. The distributed control architecture proves increasingly advantageous as the number of phases in MTP-PMSM increases, owing to its modular configuration. However, minor differences in crystal oscillator frequencies among controllers may lead to pulse width modulation (PWM) carrier phase desynchronization, resulting in increased current harmonics. Conventional methods for synchronizing carrier phases in controllers rely on hardware communication systems, which not only increase the complexity of the controller, but also degrade the reliability of system. In response, our article proposes a carrier phase self-synchronization method devoid of hardware synchronization devices. The proposed method utilizes the amplitude difference between upper and lower sideband harmonic currents sampled by distributed controllers for synchronization. This carrier self-synchronization method was validated through experimentation with the dual three-phase permanent magnet synchronous motor (DTP-PMSM).


  • Nonparametric Predictive Current Control for SPMSM With Adaptive Cascade Extended Noise State Observer

    by Meizhou Yang, Sheng Huang, Wu Liao, Xuan Wu, Jinyu Kang, Ge Liang, Ting Wu, Shoudao Huang

    Conventional model-free predictive current control with linear extended state observer has been widely used in motor driving systems due to its straightforward implementation and strong robustness. However, its accuracy still suffers from noise and relies on inductance to design the input gain, which restrains high-performance development. To address these issues, a nonparametric predictive current control (NPCC) is proposed for surface-mounted permanent magnet synchronous motors. First, an extended noise state observer (ENSO) with an auxiliary state is presented to reduce the noise sensitivities. Then, a novel cascade ENSO (CENSO) introducing the cascaded structure is presented to further improve disturbance estimation capability. In this way, the proposed CENSO achieves comprehensive improvements in noise suppression and disturbance rejection. Moreover, to eliminate the influence of the inductance parameter mismatch, an adaptive control algorithm is designed to estimate the input gain online, thereby eliminating errors caused by inductance parameter mismatch and reducing current harmonics. Finally, through experimental comparison, it has been proven that NPCC has superior steady-state performance and robustness against noise and parameter variations.


  • Single-Phase Open-Circuit Fault-Tolerant Direct Torque Control for Dual Three-Phase PMSM Based on SVPWM

    by Yu Liu, Sheng Huang, Wu Liao, Shaojie Wang, Hongwei Tang, Ge Liang, Derong Luo, Xuan Wu, Shoudao Huang

    High reliability is one of the primary advantages of the dual three-phase permanent magnet synchronous motor (DTP-PMSM). However, single-phase open-circuit fault in the DTP-PMSM drive suffers from large current harmonics and significant torque ripple. To solve these problems, a fault-tolerant direct torque control (FT-DTC) strategy based on space vector pulse width modulation (SVPWM) is proposed in this paper. Firstly, the component of stator flux on β-axis is modified under postfault. Based on this modified stator flux on β-axis, the stator current and the stator flux maintain the same circular trajectory both pre- and postfault. Secondly, the reference voltage is derived based on the relationship between the stator flux and the stator voltage. Then, the closed-loop controller on z-axis is introduced to suppress current harmonics caused by factors such as dead-time and back electromotive force (EMF) distortion. The output of the closed-loop controller is the harmonic voltage. Furthermore, a novel SVPWM technique is designed to modulate the reference voltage and harmonic voltage. Finally, experimental results demonstrate that the proposed FT-DTC strategy based on SVPWM can achieve high-performance operation under singlephase open-circuit fault.


  • Multivector-Based Model-Free Predictive Speed Control With Disturbance Suppression and Weighting Factor Elimination for SPMSM

    by Meizhou Yang, Pengda Wang, Sheng Huang, Wu Liao, Xuan Wu, Ge Liang, Ting Wu, Xicai Liu, Xing Li, Shoudao Huang

    Multi-vector-based model predictive direct speed control (MV-MPDSC) suffers from outer loop disturbance, inner loop disturbance, and weighting factor tuning. To solve these problems, a multi-vector-based model-free predictive speed control (MV-MFPSC) is proposed for the surface-mounted permanent magnet synchronous motors (SPMSMs). First, a reduced-order ultra-local model is established by introducing an equivalent speed-tracking error as a state variable, which derives the outer and inner loop disturbances as a lumped disturbance while compensating for differences between mechanical and electromagnetic time constants. It reduces the number of observers and the speed overshoot/oscillation. Theoretical analysis indicates that the nonlinear extended state observer (NESO) exhibits a poor estimation performance facing the lumping disturbance of large-scale changes. Thus, a modified NESO (MNESO) is introduced to achieve a faster and more accurate lumped disturbance estimation, which significantly improves the dynamic performance. Moreover, its parameter design principles are proposed to enhance the practicality. Then, an algebraic minimizing approach is introduced to directly calculate the duty cycle of the selected voltage vectors, and the weighting factors can be eliminated through clever mathematical operation. It avoids the duty cycle calculation error caused by imperfect weighting factors and improves the steady-state performance. The effectiveness of the MV-MFPSC was demonstrated through experiments.


  • Three-Vector-Based Model Predictive Torque Control for Dual Three-Phase PMSM With Torque and Flux Ripples Reduction

    by Yu Liu, Sheng Huang, Wu Liao, Ge Liang, Hesong Cui, Congqi Feng, Xuan Wu, Juan Wei, Shoudao Huang

    The conventional model predictive torque control (MPTC) used for dual three-phase permanent magnet synchronous motors (DTP-PMSMs) faces several challenges, such as significant computational burden, large current harmonics, and large torque and flux ripples due to the application of imprecise voltage vectors. To address these issues, a novel three-vector-based MPTC strategy was introduced in this study for DTP-PMSMs. First, virtual vectors were adopted to reduce the current harmonic components. Second, four candidate vector groups were determined based on torque deviation and flux position. Each candidate vector group comprised two virtual vectors and one zero vector, which enabled the precise control of torque and flux through the duty-ratio modulation strategy. Third, the switching sequence was optimized to facilitate implementation in digital controllers. Then, a cost function was defined to evaluate the average torque and flux ripples of each candidate vector group in a sampling period, and the one with the minimum cost function was applied in the next sampling period. This approach effectively reduced the current harmonics, torque ripple, and flux ripple while avoiding large computational burden. Finally, experiments were conducted to demonstrate the effectiveness of the proposed method.


  • A Novel Torque Harmonics Suppression PWM Method of High-Speed PMSG for Microturbine Power Generation System

    by Congqi Feng, Pengda Wang, Sheng Huang, Zhaoyang Zhang, Wu Liao, Ge Liang, Yu Liu, Xuan Wu, Shoudao Huang

    As microturbine (MT) power generation systems usually operate at high speeds, the switching-to-fundamental frequency ratio (SFR) reaches excessively low due to the limited switching frequency of the pulse width modulation (PWM) rectifier, resulting in undesirable electromagnetic torque harmonics that seriously hinder the torque performance and stability of the system. To restrain the electromagnetic torque harmonics under high speeds and low SFRs, this article proposes a novel torque harmonic suppression PWM (THSPWM) method for high-speed permanent magnet synchronous generators (HSPMSGs) in MT power generation systems. In this article, the analytical electromagnetic torque equation is derived in the dq coordinate system as a function of the stator voltage under synchronous modulation, which takes the salient pole ratio and the load angle of HSPMSGs into consideration. Based on the derived analytical torque equation, a torque harmonic evaluation index is proposed as the optimization objective, and the THSPWM method can be established by optimizing the switching angles of the stator voltage to minimize torque harmonics. Finally, the effectiveness in suppressing torque harmonics of the proposed THSPWM method is verified on the HSPMSG platform.