Da Gyun Shin
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Da Gyun Shin has a total of 9 co-authors. Here are the top co-authors by number of shared publications:
- Jaeyong Lee
Department of Naval Architecture and Ocean Engineering, Dong-eui University, Busan 47340, Korea
2 shared publications - Kwang Hyo Jung
Department of Naval Architecture and Ocean Engineering Pusan National University Busan Republic of Korea
2 shared publications - Seong Yun Shin
Graduate Student Department of Naval Architecture and Ocean Engineering Pusan National University Busan Korea
2 shared publications - Seung Jae Lee
Division of Naval Architecture and Ocean Systems Engineering, Korean Maritime and Ocean University, Busan 46252, Republic of Korea
2 shared publications - Sung Boo Park
Graduate Student Department of Naval Architecture and Ocean Engineering Pusan National University Busan Korea
2 shared publications - Solyoung Han
Senior engineer researcher Samsung Heavy Industries Co., LTD (SHI) Daejeon Korea
1 shared publication
Latest Publications
- Open Access
- 31 October 2020
- Published by The Korean Society of Ocean Engineers in Journal of Ocean Engineering and Technology
- Vol. 34 (5) , 304-315
Effect of the Turret’s Rotational Damping on the Heading Stability of a Turret-Moored FPSO
Certain types of facilities operating offshore need to maintain their position, for which diverse mooring systems are employed, such as single point mooring (SPM), spread mooring, and turret mooring systems (TMSs). TMSs are widely used in relatively harsh environments. The use of a turret allows a vessel to rotate towards a predominant external load to reduce its effective load. However, floaters equipped with a turret might experience a fish-tailing phenomenon in specific conditions, and in severe cases, the motion will worsen. Since turrets are widely utilized, abundant research has been accomplished, which has mainly been about the yaw behavior or factors related to heading stability. Various causes have been suggested as factors in yaw motion of turret-moored floaters, but the underlying causes still need to be verified. Munipalli et al. (2007) examined the response of the heading under conditions with multiple regular waves and fixed steepness from head sea. They found that large yaw motion occurred for a shorter wave period. Cho et al. (2013) experimented with the yaw motion of a turret-moored floating body in regular waves with fixed wave steepness. Studies have examined the effect of the distance between the turret and the center of gravity ( ) of a system and the distance between and the center of the turret ( ). The maximum yaw angle in regular waves was analyzed, and it was found that when the turret is closer to , the yaw motion is larger (Yadav et al., 2007). Sanchez-Mondragon et al. (2018) compared the results of a similar study with different configurations and wave steepness. The configuration and the environmental conditions were varied, and the turret position and the mooring stiffness influenced the specific wave period between 15.0 and 19.0 s. Kaasen et al. (2017) concluded that the interaction between yaw and sway is most important in their research on the heading control of turret-moored floating production storage and offloading (FPSO), which they performed with a simplified model. Garza-Rios and Bernitsas (1999) presented a mathematical model for the nonlinear dynamics of slow motions in the horizontal plane of a TMS in terms of the equation of motion. They proved that if the friction moment
- 31 October 2020
- Published by The Korean Society of Ocean Engineers in Journal of Ocean Engineering and Technology
- Vol. 34 (5) , 304-315
Open AccessEffect of the Turret’s Rotational Damping on the Heading Stability of a Turret-Moored FPSO
Certain types of facilities operating offshore need to maintain their position, for which diverse mooring systems are employed, such as single point mooring (SPM), spread mooring, and turret mooring systems (TMSs). TMSs are widely used in relatively harsh environments. The use of a turret allows a vessel to rotate towards a predominant external load to reduce its effective load. However, floaters equipped with a turret might experience a fish-tailing phenomenon in specific conditions, and in severe cases, the motion will worsen. Since turrets are widely utilized, abundant research has been accomplished, which has mainly been about the yaw behavior or factors related to heading stability. Various causes have been suggested as factors in yaw motion of turret-moored floaters, but the underlying causes still need to be verified. Munipalli et al. (2007) examined the response of the heading under conditions with multiple regular waves and fixed steepness from head sea. They found that large yaw motion occurred for a shorter wave period. Cho et al. (2013) experimented with the yaw motion of a turret-moored floating body in regular waves with fixed wave steepness. Studies have examined the effect of the distance between the turret and the center of gravity ( ) of a system and the distance between and the center of the turret ( ). The maximum yaw angle in regular waves was analyzed, and it was found that when the turret is closer to , the yaw motion is larger (Yadav et al., 2007). Sanchez-Mondragon et al. (2018) compared the results of a similar study with different configurations and wave steepness. The configuration and the environmental conditions were varied, and the turret position and the mooring stiffness influenced the specific wave period between 15.0 and 19.0 s. Kaasen et al. (2017) concluded that the interaction between yaw and sway is most important in their research on the heading control of turret-moored floating production storage and offloading (FPSO), which they performed with a simplified model. Garza-Rios and Bernitsas (1999) presented a mathematical model for the nonlinear dynamics of slow motions in the horizontal plane of a TMS in terms of the equation of motion. They proved that if the friction moment
- Open Access
- 28 February 2020
- Published by The Korean Society of Ocean Engineers in Journal of Ocean Engineering and Technology
- Vol. 34 (1) , 26-36
Extreme Value Analysis of Metocean Data for Barents Sea
According to the National Oceanic and Atmospheric Administration (NOAA), the Earth's average temperature is increasing annually as global warming continues, and the temperature of the Arctic region is increasing twice as fast as those of other regions (NOAA, 2018). With Arctic glaciers melting owing to global warming, the importance of developing marine resources buried in the Arctic is emerging. According to the United States Geological Survey, undiscovered recoverable resources in the Arctic region include approximately 90 billion barrels (Bbbl) of oil, 1,669 trillion cubic feet (Tcf) of gas, and 44 Bbbl of natural gas liquid (Bird et al., 2008). It is estimated that 13% of the world's undiscovered oil volume and 30% of the world's undiscovered gas volume are buried in the Arctic region. In general, marine resources in the deep sea are developed by offshore structures, and it is important to collect and analyze the metocean data of sea areas where marine resources are buried for the operation and survival of offshore structures. Metocean data include wave, wind, current, water depth, tide, and soil conditions. To reflect metocean data in the design of offshore structures, extreme value analysis should be conducted (API, 2005). Metocean data can be collected from measurement data of actual sea areas that use buoys or ships, hindcast data that estimate the desired data of the past through numerical methods based on past metocean data, and satellite data that use satellites. According to DNVGL (2015), for the design of offshore structures, the significant wave height (Hs) and spectral peak wave period (Tp) of 100-year return values should be used for waves, whereas the 100-year return value of the one-hour average wind speed at 10 m above the mean sea level (MSL) should be used for wind speed. For ocean currents, the 10-year return value of the current speed should be reflected in the design. To derive return values through statistical methods, methods for selecting the collected data must be determined. Such methods can be primarily categorized into global and event models. Global models include the initial distribution and total sample methods that use the entire data statistically, and the event models include the peak over threshold method, which uses data above a certain threshold, and the annual maxim method, which uses only the annual maximum values (DNV, 2014). Extreme value distributions (EVDs) used for extreme value analyses include the Gumbel, Frechet, Weibull, and log-normal distributions. Methods for estimating the parameters of EVDs include
- 28 February 2020
- Published by The Korean Society of Ocean Engineers in Journal of Ocean Engineering and Technology
- Vol. 34 (1) , 26-36
Open AccessExtreme Value Analysis of Metocean Data for Barents Sea
According to the National Oceanic and Atmospheric Administration (NOAA), the Earth's average temperature is increasing annually as global warming continues, and the temperature of the Arctic region is increasing twice as fast as those of other regions (NOAA, 2018). With Arctic glaciers melting owing to global warming, the importance of developing marine resources buried in the Arctic is emerging. According to the United States Geological Survey, undiscovered recoverable resources in the Arctic region include approximately 90 billion barrels (Bbbl) of oil, 1,669 trillion cubic feet (Tcf) of gas, and 44 Bbbl of natural gas liquid (Bird et al., 2008). It is estimated that 13% of the world's undiscovered oil volume and 30% of the world's undiscovered gas volume are buried in the Arctic region. In general, marine resources in the deep sea are developed by offshore structures, and it is important to collect and analyze the metocean data of sea areas where marine resources are buried for the operation and survival of offshore structures. Metocean data include wave, wind, current, water depth, tide, and soil conditions. To reflect metocean data in the design of offshore structures, extreme value analysis should be conducted (API, 2005). Metocean data can be collected from measurement data of actual sea areas that use buoys or ships, hindcast data that estimate the desired data of the past through numerical methods based on past metocean data, and satellite data that use satellites. According to DNVGL (2015), for the design of offshore structures, the significant wave height (Hs) and spectral peak wave period (Tp) of 100-year return values should be used for waves, whereas the 100-year return value of the one-hour average wind speed at 10 m above the mean sea level (MSL) should be used for wind speed. For ocean currents, the 10-year return value of the current speed should be reflected in the design. To derive return values through statistical methods, methods for selecting the collected data must be determined. Such methods can be primarily categorized into global and event models. Global models include the initial distribution and total sample methods that use the entire data statistically, and the event models include the peak over threshold method, which uses data above a certain threshold, and the annual maxim method, which uses only the annual maximum values (DNV, 2014). Extreme value distributions (EVDs) used for extreme value analyses include the Gumbel, Frechet, Weibull, and log-normal distributions. Methods for estimating the parameters of EVDs include