Veit Gufler
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Veit Gufler has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Erich Wehrle
Free University of Bozen-Bolzano
13 shared publications - Renato Vidoni
Free University of Bozen-Bolzano
8 shared publications - Andreas Zwölfer
Technical University of Munich
3 shared publications - Andrea Giusti
Faculty of Engineering Free University of Bozen‐Bolzano Bolzano Italy
2 shared publications - Chiara Nezzi
Free University of Bozen-Bolzano
1 shared publication - Davide Galli
Faculty of Engineering Free University of Bozen‐Bolzano Bolzano Italy
1 shared publication
Latest Publications
- Open Access
- 25 September 2026
- Published by Wiley in International Journal of Mechanical System Dynamics
An Approach for Computationally Efficient Yet Accurate Modeling of Vibrating Machines With Neidhart Springs
Accurate modeling of vibrating machines equipped with Neidhart springs is challenging due to the strong nonlinearities introduced by the elastomer–metal torsional elements and the constraints imposed by their kinematic arrangement. Multibody modeling methodologies for such vibrating machines are often computationally demanding, thus limiting the practicality for efficient design optimization and iterative procedures. To overcome this limitation, a reproducible methodology is proposed to derive an accurate, computationally efficient linear model without requiring access to the actual machine. This is done by introducing a nonlinear multibody model of such machines, parameterized exclusively through CAD geometries, technical datasheets, and existing literature data. Subsequently, the multibody model is simulated under nominal operating conditions to obtain the steady‐state response of the oscillating chassis. From the simulation, the chassis's range of motion is extracted and used to identify the equivalent linear stiffness and damping coefficients of the supports using the Neidhart spring. This allows one to derive an equivalent linear dynamic model that enhances computational efficiency while preserving high accuracy. The resulting linear model is compared with the nonlinear multibody model and experimental measurements from a real vibrating machine. The results indicate that the linear model closely matches the nonlinear multibody model response in steady state, achieving a significant reduction in computation time and showing good agreement with experimental acceleration measurements.
- 25 September 2026
- Published by Wiley in International Journal of Mechanical System Dynamics
Open AccessAn Approach for Computationally Efficient Yet Accurate Modeling of Vibrating Machines With Neidhart Springs
Accurate modeling of vibrating machines equipped with Neidhart springs is challenging due to the strong nonlinearities introduced by the elastomer–metal torsional elements and the constraints imposed by their kinematic arrangement. Multibody modeling methodologies for such vibrating machines are often computationally demanding, thus limiting the practicality for efficient design optimization and iterative procedures. To overcome this limitation, a reproducible methodology is proposed to derive an accurate, computationally efficient linear model without requiring access to the actual machine. This is done by introducing a nonlinear multibody model of such machines, parameterized exclusively through CAD geometries, technical datasheets, and existing literature data. Subsequently, the multibody model is simulated under nominal operating conditions to obtain the steady‐state response of the oscillating chassis. From the simulation, the chassis's range of motion is extracted and used to identify the equivalent linear stiffness and damping coefficients of the supports using the Neidhart spring. This allows one to derive an equivalent linear dynamic model that enhances computational efficiency while preserving high accuracy. The resulting linear model is compared with the nonlinear multibody model and experimental measurements from a real vibrating machine. The results indicate that the linear model closely matches the nonlinear multibody model response in steady state, achieving a significant reduction in computation time and showing good agreement with experimental acceleration measurements.
- 16 September 2026
- Published by Springer Nature
- p. 225-233
A Lightweight Design Formulation for Combined Design and Command Optimization of Planar Manipulators with Flexible Links
- 16 September 2026
- Published by Springer Nature
- p. 225-233
A Lightweight Design Formulation for Combined Design and Command Optimization of Planar Manipulators with Flexible Links
- Open Access
Modeling and Energy Expenditure Comparison of RRR and PRR Planar Robotic Manipulators for Pick-and-Place Operations
Energy efficiency represents a fundamental aspect of sustainable industrial automation, where minimizing energy expenditure supports both environmental and economic goals. This work presents the modeling and comparative analysis of the energy consumption of three planar robotic manipulators performing pick-and-place operations: a serial RRR configuration (RRR-D2) and two alternative PRR architectures (PRR90 and PRR45) featuring linear prismatic guides. For each manipulator, kinematic and dynamic models are derived, and actuator electro-mechanical effects are incorporated to obtain realistic energy evaluations. The analysis is carried out over four representative trajectories and two design variables, enabling a consistent comparison in terms of both total and recoverable energy through regenerative braking. Results show that geometric and actuation parameters significantly influence energy performance and that specific PRR configurations can achieve comparable motion capabilities to the RRR structure with reduced energy demand. The proposed framework supports energy-aware robot selection and design, contributing to the development of efficient and sustainable planar manipulators for repetitive industrial operations.
Open AccessModeling and Energy Expenditure Comparison of RRR and PRR Planar Robotic Manipulators for Pick-and-Place Operations
Energy efficiency represents a fundamental aspect of sustainable industrial automation, where minimizing energy expenditure supports both environmental and economic goals. This work presents the modeling and comparative analysis of the energy consumption of three planar robotic manipulators performing pick-and-place operations: a serial RRR configuration (RRR-D2) and two alternative PRR architectures (PRR90 and PRR45) featuring linear prismatic guides. For each manipulator, kinematic and dynamic models are derived, and actuator electro-mechanical effects are incorporated to obtain realistic energy evaluations. The analysis is carried out over four representative trajectories and two design variables, enabling a consistent comparison in terms of both total and recoverable energy through regenerative braking. Results show that geometric and actuation parameters significantly influence energy performance and that specific PRR configurations can achieve comparable motion capabilities to the RRR structure with reduced energy demand. The proposed framework supports energy-aware robot selection and design, contributing to the development of efficient and sustainable planar manipulators for repetitive industrial operations.
- 26 August 2025
- Published by Springer Nature in Forschung im Ingenieurwesen
- Vol. 89 (1) , 1-24
Mass matrix modeling approaches with flexible multibody dynamics
- 26 August 2025
- Published by Springer Nature in Forschung im Ingenieurwesen
- Vol. 89 (1) , 1-24
Mass matrix modeling approaches with flexible multibody dynamics
- 8 October 2024
- Published by Springer Nature
- p. 66-75
Use of Lumped Mass Formulation in the Design Sensitivity Analysis of Flexible Multibody Dynamics
- 8 October 2024
- Published by Springer Nature
- p. 66-75
Use of Lumped Mass Formulation in the Design Sensitivity Analysis of Flexible Multibody Dynamics
- Open Access
Analytical Sensitivity Analysis of Dynamic Problems with Direct Differentiation of Generalized-α Time Integration
In this paper, the direct differentiation of generalized- time integration is derived, equations are introduced and results are shown. Although generalized- time integration has found usage, the derivation and the resulting equations for the analytical sensitivity analysis via direct differentiation are missing. Thus, here, the sensitivity equations of generalized- time integration via direct differentiation are provided. Results with generalized- are compared with Newmark- time integration and their sensitivities with numerical sensitivities via forward finite differencing in terms of accuracy and performance. An example is shown for each linear structural dynamics and flexible multibody dynamics.Open AccessAnalytical Sensitivity Analysis of Dynamic Problems with Direct Differentiation of Generalized-α Time Integration
In this paper, the direct differentiation of generalized- time integration is derived, equations are introduced and results are shown. Although generalized- time integration has found usage, the derivation and the resulting equations for the analytical sensitivity analysis via direct differentiation are missing. Thus, here, the sensitivity equations of generalized- time integration via direct differentiation are provided. Results with generalized- are compared with Newmark- time integration and their sensitivities with numerical sensitivities via forward finite differencing in terms of accuracy and performance. An example is shown for each linear structural dynamics and flexible multibody dynamics. - 5 January 2024
- Published by Springer Nature
- p. 40-51
Direct Differentiation of the Floating Frame of Reference Formulation via Invariants for Gradient-Based Design Optimization
- 5 January 2024
- Published by Springer Nature
- p. 40-51
Direct Differentiation of the Floating Frame of Reference Formulation via Invariants for Gradient-Based Design Optimization
- 22 September 2023
- Published by Springer Nature in Optimization and Engineering
- Vol. 25 (2) , 1069-1104
A gradient-based approach for optimal actuator design with morphing wings
- 22 September 2023
- Published by Springer Nature in Optimization and Engineering
- Vol. 25 (2) , 1069-1104
A gradient-based approach for optimal actuator design with morphing wings
- Open Access
- 15 February 2023
- Published by Springer Nature in Multibody System Dynamics
- Vol. 58 (1) , 1-20
A semi-analytical approach to sensitivity analysis with flexible multibody dynamics of a morphing forward wing section
In the present paper, semi-analytical design sensitivity analysis of a morphing forward wing section modeled as a flexible multibody system is developed. The flexible multibody dynamics model consists of a flexible external wing skin and an actuation mechanism with rigid bodies. The floating frame of reference formulation is used for the formulation of the equations of motion, while time integration is carried out with the generalized- $\alpha$ α method and Newton–Raphson iterations for the nonlinear analysis. These steps are considered in both the primal analysis and the developed efficient design sensitivity analysis. The calculation of the design sensitivities is based on direct differentiation and carried out with a semi-analytical approach. The responses of interest include the deviations of the wing profile from the targeted morphed geometry and the resulting stresses in the wing skin. The design variables considered in this work are geometric parameters, material parameters and loading parameters. The calculations with the shown method provide reliable and accurate results combined with high computational efficiency. The visualization of the computed sensitivity values gives an easy interpretation of the sensitivities and facilitates the understanding of the design engineer on how to change the design variables to improve the design of the system. The introduced sensitivity analysis enables future investigations, including the application of the method to gradient-based design optimization and uncertainty analysis.
- 15 February 2023
- Published by Springer Nature in Multibody System Dynamics
- Vol. 58 (1) , 1-20
Open AccessA semi-analytical approach to sensitivity analysis with flexible multibody dynamics of a morphing forward wing section
In the present paper, semi-analytical design sensitivity analysis of a morphing forward wing section modeled as a flexible multibody system is developed. The flexible multibody dynamics model consists of a flexible external wing skin and an actuation mechanism with rigid bodies. The floating frame of reference formulation is used for the formulation of the equations of motion, while time integration is carried out with the generalized- $\alpha$ α method and Newton–Raphson iterations for the nonlinear analysis. These steps are considered in both the primal analysis and the developed efficient design sensitivity analysis. The calculation of the design sensitivities is based on direct differentiation and carried out with a semi-analytical approach. The responses of interest include the deviations of the wing profile from the targeted morphed geometry and the resulting stresses in the wing skin. The design variables considered in this work are geometric parameters, material parameters and loading parameters. The calculations with the shown method provide reliable and accurate results combined with high computational efficiency. The visualization of the computed sensitivity values gives an easy interpretation of the sensitivities and facilitates the understanding of the design engineer on how to change the design variables to improve the design of the system. The introduced sensitivity analysis enables future investigations, including the application of the method to gradient-based design optimization and uncertainty analysis.
- 29 November 2022
- Published by Springer Nature in Multibody System Dynamics
- Vol. 60 (2) , 257-288
Analytical derivatives of flexible multibody dynamics with the floating frame of reference formulation
- 29 November 2022
- Published by Springer Nature in Multibody System Dynamics
- Vol. 60 (2) , 257-288
Analytical derivatives of flexible multibody dynamics with the floating frame of reference formulation