Xingguo Zeng
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Xingguo Zeng has a total of 130 co-authors. Here are the top co-authors by number of shared publications:
- Chunlai Li
Key Laboratory of Lunar and Deep Space Exploration National Astronomical Observatories Chinese Academy of Sciences Beijing China
13 shared publications Wangli Chen
Key Laboratory of Lunar and Deep Space Exploration, National Astronomical Observatories, Chinese Academy of Sciences, Beijing, China
10 shared publications- Jianjun Liu
Key Laboratory of Lunar and Deep Space Exploration National Astronomical Observatories Chinese Academy of Sciences Beijing China
9 shared publications - Wei Yan
Key Laboratory of Lunar and Deep Space Exploration, National Astronomical Observatories, Chinese Academy of Sciences, Beijing, China
9 shared publications - Xin Ren
Chinese Academy of Sciences
9 shared publications - Bin Liu
Key Laboratory of Lunar and Deep Space Exploration National Astronomical Observatories Chinese Academy of Sciences Beijing China
8 shared publications
Latest Publications
- Open Access
- 23 October 2026
- Published by EDP Sciences in Astronomy & Astrophysics
- Vol. 714, A435
Global 3D model reconstruction of Phobos integrating high-resolution imaging data from the Tianwen-1 mission
Context. Tianwen-1 was successfully launched in July 2020 and has been operating normally since entering its remote sensing exploration phase in February 2021. The High-Resolution Imaging Camera (HiRIC) aboard Tianwen-1 provided a valuable opportunity to observe Phobos. Aims. To address the relative scarcity of imaging data for the trailing hemisphere of Phobos, we first designed an observation strategy for Tianwen-1 and imaged this region using HiRIC. The resulting imagery covers the Öpik crater region, which lies near the center of the trailing hemisphere and serves as a representative area for assessing local reconstruction quality. Our objective is to integrate these new observations with historical imagery from multiple missions to reconstruct a global three-dimensional (3D) model of Phobos with high geometric accuracy. Methods. We developed a three-step incremental stereo-photogrammetric (SPG) processing strategy and applied it to 851 images from the Mars Express, Viking Orbiter, and Tianwen-1 HiRIC. Results. The incorporation of Tianwen-1 HiRIC observations not only improves the overall geometric accuracy of the model but also enhances the reconstruction of the topography in the Öpik crater region on the trailing hemisphere. The resulting model also supports updated estimates of Phobos’ volume, surface area, and bulk density, which provide useful a priori information for planning future deep-space exploration missions.
- 23 October 2026
- Published by EDP Sciences in Astronomy & Astrophysics
- Vol. 714, A435
Open AccessGlobal 3D model reconstruction of Phobos integrating high-resolution imaging data from the Tianwen-1 mission
Context. Tianwen-1 was successfully launched in July 2020 and has been operating normally since entering its remote sensing exploration phase in February 2021. The High-Resolution Imaging Camera (HiRIC) aboard Tianwen-1 provided a valuable opportunity to observe Phobos. Aims. To address the relative scarcity of imaging data for the trailing hemisphere of Phobos, we first designed an observation strategy for Tianwen-1 and imaged this region using HiRIC. The resulting imagery covers the Öpik crater region, which lies near the center of the trailing hemisphere and serves as a representative area for assessing local reconstruction quality. Our objective is to integrate these new observations with historical imagery from multiple missions to reconstruct a global three-dimensional (3D) model of Phobos with high geometric accuracy. Methods. We developed a three-step incremental stereo-photogrammetric (SPG) processing strategy and applied it to 851 images from the Mars Express, Viking Orbiter, and Tianwen-1 HiRIC. Results. The incorporation of Tianwen-1 HiRIC observations not only improves the overall geometric accuracy of the model but also enhances the reconstruction of the topography in the Öpik crater region on the trailing hemisphere. The resulting model also supports updated estimates of Phobos’ volume, surface area, and bulk density, which provide useful a priori information for planning future deep-space exploration missions.
- Open Access
- 14 September 2026
- Published by American Astronomical Society in The Astronomical Journal
- Vol. 172 (4) , 203
Size–Frequency Distributions of Centimeter- to Meter-scale Rock Fragments at the Chang’e-3–6 Landing Sites
The distribution of boulders on the Moon is critical for understanding regolith evolution and cratering processes. Using high-resolution descent imagery from the Chang’e-3 to -6 (CE-3 to CE-6) missions, we compared the size–frequency distributions (SFDs) and spatial patterns of centimeter- to meter-scale boulders across diverse geological settings. Results show that local boulder SFDs are dictated by proximal impacts and regolith thickness. At the young CE-3 and CE-5 sites, the power-law α ranges between −2.43 and −2.06. Here, hundred-meter-scale impacts penetrated the regolith, ejecting fresh bedrock and driving rapid regolith accretion. In contrast, the ancient CE-4 and CE-6 sites exhibit α ranging between −3.41 and −3.17. At these older sites, the lack of large-scale excavation slows regolith thickening, while continuous micrometeorite gardening drives a rapid decline in boulder abundance. Notably, the thinner regolith at CE-6 allows meter-scale impacts to excavate bedrock. However, as kinetic energy is limited, the exponent of the scaling law for maximum boulder size versus crater diameter (0.52) is significantly shallower than for large craters. Additionally, observations at the CE-5 and CE-6 sites confirm that significant spatial heterogeneity in boulder distributions is driven by oblique impacts. By uncovering the potential mechanisms behind varying boulder SFDs across these four sites, this study provides new observational constraints on the boulder–regolith coevolution model.
- 14 September 2026
- Published by American Astronomical Society in The Astronomical Journal
- Vol. 172 (4) , 203
Open AccessSize–Frequency Distributions of Centimeter- to Meter-scale Rock Fragments at the Chang’e-3–6 Landing Sites
The distribution of boulders on the Moon is critical for understanding regolith evolution and cratering processes. Using high-resolution descent imagery from the Chang’e-3 to -6 (CE-3 to CE-6) missions, we compared the size–frequency distributions (SFDs) and spatial patterns of centimeter- to meter-scale boulders across diverse geological settings. Results show that local boulder SFDs are dictated by proximal impacts and regolith thickness. At the young CE-3 and CE-5 sites, the power-law α ranges between −2.43 and −2.06. Here, hundred-meter-scale impacts penetrated the regolith, ejecting fresh bedrock and driving rapid regolith accretion. In contrast, the ancient CE-4 and CE-6 sites exhibit α ranging between −3.41 and −3.17. At these older sites, the lack of large-scale excavation slows regolith thickening, while continuous micrometeorite gardening drives a rapid decline in boulder abundance. Notably, the thinner regolith at CE-6 allows meter-scale impacts to excavate bedrock. However, as kinetic energy is limited, the exponent of the scaling law for maximum boulder size versus crater diameter (0.52) is significantly shallower than for large craters. Additionally, observations at the CE-5 and CE-6 sites confirm that significant spatial heterogeneity in boulder distributions is driven by oblique impacts. By uncovering the potential mechanisms behind varying boulder SFDs across these four sites, this study provides new observational constraints on the boulder–regolith coevolution model.
- Open Access
- 22 September 2025
- Published by Springer Nature in Nature Astronomy
- Vol. 9 (12) , 1776-1784
Lunar surface and subsurface water revealed by Chang’e-6
The processes driving the formation and distribution of lunar water (OH/H 2 O), particularly in the subsurface, remain poorly understood. An opportunity to study subsurface water comes from lander plumes, which can displace and expose millimetre- to centimetre-sized regolith during the descent of the lander. Here we analyse data from the Chang’e-6 landing site and find that plume-disturbed areas exhibit distinct temperature and water-content patterns, which are driven by the redistribution of fine regolith. The average water content of the exposed fine regolith of the shallow subsurface is ~76 ppm, which is lower than the surface abundance of ~105 ppm measured at the surface. The Chang’e-6 landing site also contains on average approximately twice the water content than the Chang’e-5 one. Temporal variations of water content are observed at identical locations but different local times, exhibiting a minimum at local noon. We suggest that the differences in water content are correlated with the regolith glass abundance, particle sizes, depths and local times, reinforcing the hypothesis that solar wind implantation and impact gardening govern lunar water formation and distribution.
- 22 September 2025
- Published by Springer Nature in Nature Astronomy
- Vol. 9 (12) , 1776-1784
Open AccessLunar surface and subsurface water revealed by Chang’e-6
The processes driving the formation and distribution of lunar water (OH/H 2 O), particularly in the subsurface, remain poorly understood. An opportunity to study subsurface water comes from lander plumes, which can displace and expose millimetre- to centimetre-sized regolith during the descent of the lander. Here we analyse data from the Chang’e-6 landing site and find that plume-disturbed areas exhibit distinct temperature and water-content patterns, which are driven by the redistribution of fine regolith. The average water content of the exposed fine regolith of the shallow subsurface is ~76 ppm, which is lower than the surface abundance of ~105 ppm measured at the surface. The Chang’e-6 landing site also contains on average approximately twice the water content than the Chang’e-5 one. Temporal variations of water content are observed at identical locations but different local times, exhibiting a minimum at local noon. We suggest that the differences in water content are correlated with the regolith glass abundance, particle sizes, depths and local times, reinforcing the hypothesis that solar wind implantation and impact gardening govern lunar water formation and distribution.
- Open Access
- 7 August 2025
- Published by Springer Nature in Communications Earth & Environment
- Vol. 6 (1) , 1-10
Subsoil structure at the Chang’E-6 landing site revealed by in-situ Lunar Regolith Penetrating Radar
- 7 August 2025
- Published by Springer Nature in Communications Earth & Environment
- Vol. 6 (1) , 1-10
Open AccessSubsoil structure at the Chang’E-6 landing site revealed by in-situ Lunar Regolith Penetrating Radar
- Open Access
- 9 July 2025
- Published by Springer Nature in Nature
- Vol. 643 (8071) , 371-375
Ultra-depleted mantle source of basalts from the South Pole–Aitken basin
Lunar mare basalts illuminate the nature of the Moon’s mantle, the lunar compositional asymmetry and the early lunar magma ocean (LMO)1,2,3. However, the characteristics of the mantle beneath the vast South Pole–Aitken (SPA) basin on the lunar farside remain a mystery. Here we present the petrology and geochemistry of basalt fragments from Chang’e-6 (CE6), the first returned lunar farside samples from the SPA basin4,5,6,7. These 2.8-billion-year-old CE6 basalts8 share similar major element compositions with the most evolved Apollo 12 ilmenite basalts. They exhibit extreme Sr–Nd depletion, with initial 87Sr/86Sr ratios of 0.699237 to 0.699329 and εNd(t) values (a measure of the neodymium isotopic composition) of 15.80 to 16.13. These characteristics indicate an ultra-depleted mantle, resulting from LMO crystallization and/or later depletion by melt extraction. The former scenario implies that the nearside and farside may possess an isotopically analogous depleted mantle endmember. The latter is probably related to the SPA impact, indicating that post-accretion massive impacts could have potentially triggered large-scale melt extraction of the underlying mantle. Either way, originating during the LMO or later melt extraction, the ultra-depleted mantle beneath the SPA basin offers a deep observational window into early lunar crust–mantle differentiation.
- 9 July 2025
- Published by Springer Nature in Nature
- Vol. 643 (8071) , 371-375
Open AccessUltra-depleted mantle source of basalts from the South Pole–Aitken basin
Lunar mare basalts illuminate the nature of the Moon’s mantle, the lunar compositional asymmetry and the early lunar magma ocean (LMO)1,2,3. However, the characteristics of the mantle beneath the vast South Pole–Aitken (SPA) basin on the lunar farside remain a mystery. Here we present the petrology and geochemistry of basalt fragments from Chang’e-6 (CE6), the first returned lunar farside samples from the SPA basin4,5,6,7. These 2.8-billion-year-old CE6 basalts8 share similar major element compositions with the most evolved Apollo 12 ilmenite basalts. They exhibit extreme Sr–Nd depletion, with initial 87Sr/86Sr ratios of 0.699237 to 0.699329 and εNd(t) values (a measure of the neodymium isotopic composition) of 15.80 to 16.13. These characteristics indicate an ultra-depleted mantle, resulting from LMO crystallization and/or later depletion by melt extraction. The former scenario implies that the nearside and farside may possess an isotopically analogous depleted mantle endmember. The latter is probably related to the SPA impact, indicating that post-accretion massive impacts could have potentially triggered large-scale melt extraction of the underlying mantle. Either way, originating during the LMO or later melt extraction, the ultra-depleted mantle beneath the SPA basin offers a deep observational window into early lunar crust–mantle differentiation.
- Top Cited PapersOpen Access
- 6 May 2025
- Published by Springer Nature in Nature Communications
- Vol. 16 (1) , 1-12
Geological characteristics of Chang’E-6 landing area in micro-scale unveiled by new observation data
Chang’E-6 mission successfully achieved humanity’s first sample return from the farside of the Moon. Here, we report a high-precision terrain dataset with millimeter-to-decimeter spatial resolution around the CE-6 landing site. Based on this dataset, the accurate location of the landing site is determined to be (153.9776° W, 41.6251° S, -5273 m), and a micro-scale geological analysis of the landing area is conducted. Comparative analysis suggests that the surface exposure time of Chang’ E-6 landing area is likely between that of Chang’E-4 and Chang’E-5 landing areas. Studies of the ejecta thickness from possible craters in mare and non-mare areas indicate that Chang’E-6 samples may contain materials from diverse provenances. Detailed topographic analysis reveals that the Chang’E-6 landing area is primarily covered by local mare materials, which were excavated from a nearby unnamed crater with a diameter of ~ 51 m and account for 30%–35% in volume.
- 6 May 2025
- Published by Springer Nature in Nature Communications
- Vol. 16 (1) , 1-12
Top Cited PapersOpen AccessGeological characteristics of Chang’E-6 landing area in micro-scale unveiled by new observation data
Chang’E-6 mission successfully achieved humanity’s first sample return from the farside of the Moon. Here, we report a high-precision terrain dataset with millimeter-to-decimeter spatial resolution around the CE-6 landing site. Based on this dataset, the accurate location of the landing site is determined to be (153.9776° W, 41.6251° S, -5273 m), and a micro-scale geological analysis of the landing area is conducted. Comparative analysis suggests that the surface exposure time of Chang’ E-6 landing area is likely between that of Chang’E-4 and Chang’E-5 landing areas. Studies of the ejecta thickness from possible craters in mare and non-mare areas indicate that Chang’E-6 samples may contain materials from diverse provenances. Detailed topographic analysis reveals that the Chang’E-6 landing area is primarily covered by local mare materials, which were excavated from a nearby unnamed crater with a diameter of ~ 51 m and account for 30%–35% in volume.
- Open Access
- 18 March 2025
- Published by Copernicus GmbH
An Innovative Approach to Performing Color Correction and Equalization for Creating Mars Global Color Image Mosaics Using Tianwen-1 MoRIC Images
Mars is rich in color information, and color images can more vividly represent its surface morphology, which helps scientists accurately interpret the geomorphological and geological characteristics of Mars. However, modern telescopes and remote sensing technology still haven't provided a quantitative answer to the exact colors of the Martian surface. The Moderate Resolution Imaging Camera (MoRIC) on Tianwen-1 is a "true color" camera with red, green, and blue spectral bands matching the spectral response range of human eyes. In around 8.3 months, it obtained color images covering the entire globe of Mars. But affected by illumination and atmospheric conditions, there are conspicuous stripes along the image strip direction in the color mosaic map, and the overall tone is noticeably red. Color difference analysis reveals that in the high latitudes of the northern hemisphere, the color differences mainly stem from varying atmospheric conditions during mapping; in the middle and low latitudes, they're mainly due to different lighting conditions; while in the high latitudes of the southern hemisphere, the color differences (measured by CIEDE2000, ΔE00) are mainly caused by the changes in surface features resulting from the seasonal melting of the ice caps. In this work, we proposed a novel approach to quantified color correction and equalization for generating Mars global color image mosaics from the MoRIC images. This approach makes the image brightness and tone visually consistent under different imaging conditions and maintains global consistency in the tones of the same surface features. A significant portion (80.1%) of the overlapped regions has color differences concentrated within ΔE00≤3.0, which greatly improves the issue of color and brightness inconsistencies in the original images (Level 2C). After processing, the tone of the global color mosaic map shows the "terracotta hue" that we expect for Mars images and is a good approximation of what the human eye would see.
- 18 March 2025
- Published by Copernicus GmbH
Open AccessAn Innovative Approach to Performing Color Correction and Equalization for Creating Mars Global Color Image Mosaics Using Tianwen-1 MoRIC Images
Mars is rich in color information, and color images can more vividly represent its surface morphology, which helps scientists accurately interpret the geomorphological and geological characteristics of Mars. However, modern telescopes and remote sensing technology still haven't provided a quantitative answer to the exact colors of the Martian surface. The Moderate Resolution Imaging Camera (MoRIC) on Tianwen-1 is a "true color" camera with red, green, and blue spectral bands matching the spectral response range of human eyes. In around 8.3 months, it obtained color images covering the entire globe of Mars. But affected by illumination and atmospheric conditions, there are conspicuous stripes along the image strip direction in the color mosaic map, and the overall tone is noticeably red. Color difference analysis reveals that in the high latitudes of the northern hemisphere, the color differences mainly stem from varying atmospheric conditions during mapping; in the middle and low latitudes, they're mainly due to different lighting conditions; while in the high latitudes of the southern hemisphere, the color differences (measured by CIEDE2000, ΔE00) are mainly caused by the changes in surface features resulting from the seasonal melting of the ice caps. In this work, we proposed a novel approach to quantified color correction and equalization for generating Mars global color image mosaics from the MoRIC images. This approach makes the image brightness and tone visually consistent under different imaging conditions and maintains global consistency in the tones of the same surface features. A significant portion (80.1%) of the overlapped regions has color differences concentrated within ΔE00≤3.0, which greatly improves the issue of color and brightness inconsistencies in the original images (Level 2C). After processing, the tone of the global color mosaic map shows the "terracotta hue" that we expect for Mars images and is a good approximation of what the human eye would see.
- Open Access
- 18 March 2025
- Published by Copernicus GmbH
Characterization of the seasonal variation of the Martian south polar cap with new observation data obtained by Tianwen-1 probe
China’s Tianwan-1 orbiter has recently observed the Martian South Polar Seasonal Cap (SPSC) around Ls =210°-332° in MY36 and obtained a bunch of data. The SPSC plays a crucial role in the planet's atmospheric dynamics, with its seasonal variation reflecting the Martian climate system. Although the recession of the SPSC has been observed over multiple Martian years, the asymmetry observed in this process makes it difficult to characterize. Understanding these asymmetries is essential for identifying time steps in the recession process and deepening our knowledge of Martian seasonal dynamics and climate cycles. Additionally, comparing the critical time steps of the recession process and investigating the impact of suspended dust on the SPSC will provide new insights into the relationship between the SPSC and climate, help in understanding the role of dust in shaping Martian atmospheric circulation, and offer valuable observational constraints for future climate models. In this study, we introduced a series of multi-temporal maps of the SPSC constructed from image data collected by the Moderate Resolution Imaging Camera (MoRIC) aboard the Tianwen-1 orbiter. With these maps, the dynamic changes (such as boundary, area, etc.) of the SPSC can be identified through remote sensing methods. And a dynamic recession model spanning from solar longitude (Ls) 210° to 332° would be demonstrated by incorporating a 5th-order polynomial fitting of the time-series on cap latitude. Furthermore, the influence of Martian dust activity on the SPSC during the spring and summer seasons could also be analyzed. This research could enhance our understanding of the complex interactions between Martian seasonal processes, dust activity, and the atmospheric system.
- 18 March 2025
- Published by Copernicus GmbH
Open AccessCharacterization of the seasonal variation of the Martian south polar cap with new observation data obtained by Tianwen-1 probe
China’s Tianwan-1 orbiter has recently observed the Martian South Polar Seasonal Cap (SPSC) around Ls =210°-332° in MY36 and obtained a bunch of data. The SPSC plays a crucial role in the planet's atmospheric dynamics, with its seasonal variation reflecting the Martian climate system. Although the recession of the SPSC has been observed over multiple Martian years, the asymmetry observed in this process makes it difficult to characterize. Understanding these asymmetries is essential for identifying time steps in the recession process and deepening our knowledge of Martian seasonal dynamics and climate cycles. Additionally, comparing the critical time steps of the recession process and investigating the impact of suspended dust on the SPSC will provide new insights into the relationship between the SPSC and climate, help in understanding the role of dust in shaping Martian atmospheric circulation, and offer valuable observational constraints for future climate models. In this study, we introduced a series of multi-temporal maps of the SPSC constructed from image data collected by the Moderate Resolution Imaging Camera (MoRIC) aboard the Tianwen-1 orbiter. With these maps, the dynamic changes (such as boundary, area, etc.) of the SPSC can be identified through remote sensing methods. And a dynamic recession model spanning from solar longitude (Ls) 210° to 332° would be demonstrated by incorporating a 5th-order polynomial fitting of the time-series on cap latitude. Furthermore, the influence of Martian dust activity on the SPSC during the spring and summer seasons could also be analyzed. This research could enhance our understanding of the complex interactions between Martian seasonal processes, dust activity, and the atmospheric system.
- Open Access
- 18 March 2025
- Published by Copernicus GmbH
Formation of Cones within the Zhurong Landing Area
On May 15, 2021, China’s first Mars exploration mission, Tianwen-1 (TW-1), successfully landed its Zhurong rover in the southern Utopia Planitia on Mars. Pitted cones, a characteristic feature of both Utopia Planitia and the landing area, play a pivotal role in understanding the local geological processes. We conducted a detailed investigation into the spatial distribution, morphological characteristics, and morphometric parameters of these cones to uncover their origins. Using High-Resolution Imaging Camera images collected by the TW-1 orbiter, we identified 272 well-preserved circular cones in the landing area. High-resolution topographic analysis show that the cone heights range from 10.5 to 90.8 m, and their basal diameters range from 178.9 to 1206.6 m. By comparing the morphometric parameters of these pitted cones with similar features on both Earth and Mars, we identified them as mud volcanoes and a subset of igneous conical features. However, the spatial analysis results favor these cones as mud volcanoes. Additionally, the lower thermal inertia of these conical features compared to surrounding materials is a typical characteristic of mud volcanoes. Based on these evidence, we interpret the conical landforms in the TW-1 landing area as mud volcanoes.The alignment of these mud volcanoes and their elongated vents orientation suggest a direction of maximum horizontal stress during their formation. This direction is consistent with nearby troughs, indicating that the mud volcanoes may have formed as a result of fracturing at the lower parts of these troughs. Through self-similar clustering analysis, we estimate the depth range of the mud source to be ~0.6-7.2 km. Based on the crater size-frequency distribution, the age of the mud volcanoes is limited to the middle to late Amazonian (~2.0 Ga - 400 Ma). These features suggest that the mud volcano cones in the landing area likely formed under volcanic destabilization conditions. Combining stress analysis with age data, we hypothesize that the formation of these mud volcano cones may have been influenced by basin subsidence and volcanic activity in the Elysium region. This study demonstrates the feasibility of using principal stress analysis to study Martian mud volcanoes, and offers insights into active geological processes on Mars during the Amazonian period.
- 18 March 2025
- Published by Copernicus GmbH
Open AccessFormation of Cones within the Zhurong Landing Area
On May 15, 2021, China’s first Mars exploration mission, Tianwen-1 (TW-1), successfully landed its Zhurong rover in the southern Utopia Planitia on Mars. Pitted cones, a characteristic feature of both Utopia Planitia and the landing area, play a pivotal role in understanding the local geological processes. We conducted a detailed investigation into the spatial distribution, morphological characteristics, and morphometric parameters of these cones to uncover their origins. Using High-Resolution Imaging Camera images collected by the TW-1 orbiter, we identified 272 well-preserved circular cones in the landing area. High-resolution topographic analysis show that the cone heights range from 10.5 to 90.8 m, and their basal diameters range from 178.9 to 1206.6 m. By comparing the morphometric parameters of these pitted cones with similar features on both Earth and Mars, we identified them as mud volcanoes and a subset of igneous conical features. However, the spatial analysis results favor these cones as mud volcanoes. Additionally, the lower thermal inertia of these conical features compared to surrounding materials is a typical characteristic of mud volcanoes. Based on these evidence, we interpret the conical landforms in the TW-1 landing area as mud volcanoes.The alignment of these mud volcanoes and their elongated vents orientation suggest a direction of maximum horizontal stress during their formation. This direction is consistent with nearby troughs, indicating that the mud volcanoes may have formed as a result of fracturing at the lower parts of these troughs. Through self-similar clustering analysis, we estimate the depth range of the mud source to be ~0.6-7.2 km. Based on the crater size-frequency distribution, the age of the mud volcanoes is limited to the middle to late Amazonian (~2.0 Ga - 400 Ma). These features suggest that the mud volcano cones in the landing area likely formed under volcanic destabilization conditions. Combining stress analysis with age data, we hypothesize that the formation of these mud volcano cones may have been influenced by basin subsidence and volcanic activity in the Elysium region. This study demonstrates the feasibility of using principal stress analysis to study Martian mud volcanoes, and offers insights into active geological processes on Mars during the Amazonian period.