EREmriye Çinar Resuloğullari

Emriye Çinar Resuloğullari

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Emriye Çinar Resuloğullari has a total of 31 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Image Processing-Based Crack Analysis on Splitting Tensile Strength Test

    by Emriye Çınar Resuloğulları

    Nowadays, fiber reinforcement is widely utilized to enhance the performance of concrete and mitigate crack formation. By improving the tensile strength of concrete, fiber reinforcement hinders the initiation and propagation of cracks and emerges as an effective method for increasing long-term durability. In recent years, image processing techniques have also provided innovative approaches for the detection and monitoring of cracks on concrete surfaces. These methods enable the precise identification of cracks, thereby facilitating early detection of potential structural damage. This study aims to examine the influence of basalt fiber reinforcement on the mechanical and physical properties of concrete. Basalt fibers were incorporated into concrete mixtures at four different dosages: 1 kg/m³, 2 kg/m³, 3 kg/m³, and 4 kg/m³. The impact of basalt fiber content on crack initiation and propagation was evaluated using an image processing-based approach. Furthermore, the effects of basalt fiber reinforcement on water absorption, porosity, capillary water absorption, and electrical resistivity were investigated. The findings indicate that basalt fiber reinforcement is notably effective in reducing crack formation and propagation in concrete. However, the optimum fiber dosage should be determined through preliminary testing to ensure balanced performance.

  • Open Access

    Investigation of the Engineering Properties of Mortars Produced Using Recycled Asphalt Pavements and Pumice Powder under the Effect of Acid

    by Meryem Rumeysa Kayıhan, Behcet Dündar, Emriye Çınar Resuloğulları

    Asphalt pavements play a fundamental role in the formation of the road superstructure and after completing their service life, they are excavated for renewal works and waste materials are produced. The use of such wastes provides economic and environmental advantages, enabling energy saving, reduction of environmental pollution, cost reduction and reduction of landfill areas. Recycled asphalt waste (RAP) has an important place in sustainable material use. In this study, the engineering properties of mortars with Pumice Powder (PP) in hydrochloric acid (HCl) environment were evaluated in detail. In the study, CEM I 42.5/R type Portland cement was used as binder, PP as mineral additive, and 0-4 mm crushed sand and RAP were used as fine aggregate. In the experimental design, different mixtures were obtained by replacing 10%, 20% and 30% of the cement weight with PP, and 0%, 25%, 50%, 75% and 100% of the crushed sand with RAP. Spreading, water absorption, porosity, ultrasonic transmission rate, capillary water absorption, flexural and compressive strength tests were applied to the produced mortar samples after 7 and 28 days of standard curing period of the samples. In addition, the physical and mechanical changes were investigated by exposing the samples kept in the curing pool for 28 days to the HCl solution for 7 and 28 days. The results revealed that the best performance was obtained when PP was used at a rate of 10% and RAP was used at a rate of 25%.

  • Open Access

    Simplified Frequency Estimation of Prefabricated Electric Poles Through Regression-Based Modal Analysis

    by Hakan Erkek, Ibrahim Karataş, Doğucan Resuloğulları, Emriye Çınar Resuloğullari, Şahin Tolga Güvel

    Prefabricated construction elements are widely used in both large- and small-scale projects, serving structural and infrastructural purposes. One notable application is in power transmission poles, which ensure the safe and efficient delivery of electricity. Despite their importance, limited research exists on the structural and modal behavior of reinforced concrete power poles. This study presents a comprehensive modal analysis of such poles, focusing on how factors like modulus of elasticity, height, and lower/upper inner and outer diameters influence dynamic performance. A total of 3240 finite element models were created, with reinforced concrete poles partially embedded in the ground. Modal analyses were performed to evaluate natural frequencies, mode shapes, and modal mass participation ratios. Results showed that increasing the modulus of elasticity raised frequency values, while greater pole height decreased them. Enlarging the lower inner and upper outer radii also led to higher frequencies. Regression analysis yielded high accuracy, with R2 values exceeding 90% and an average error rate of about 6%. The study provides empirical formulas that allow for quick frequency estimations without the need for detailed finite element modeling, as long as the material and geometric properties remain consistent. The approach can be extended to other prefabricated structural elements.


  • Open Access

    Driving the Built Environment Twin Transition: Synergising Circular Economy and Digital Tools

    by Rand Askar, Ferhat Karaca, Adriana Salles, Artyom Lukyanenko, Genesis Camila Cervantes Puma, Vanessa Tavares, Assemay Khaidarova, Ana Nadaždi, Rocío Pineda-Martos, Juan Manuel Díaz-Cabrera, et al.

    This chapter offers a comprehensive analysis of the intersection between digitalisation and the circular economy (CE) within the construction sector. It underscores the transformative potential of integrating digital tools to advance circularity objectives across managerial, environmental, economic, and social dimensions. The chapter discusses fourteen digital tools and technologies, which play a pivotal role in CE by streamlining data integration and visualisation, enhancing the accuracy of Life Cycle Costing (LCC) and Life Cycle Analysis (LCA) assessments, and supporting the adoption of CE strategies. Moreover, it explores how digital tools can facilitate collaboration among stakeholders, fostering knowledge sharing and effective communication throughout the project lifecycle. Nevertheless, challenges such as the absence of standardised methods, data interoperability issues, and the need for well-defined system boundaries remain. The chapter highlights the critical role of digitalisation in advancing the transition towards CE in the construction sector, emphasising the necessity of overcoming technical and systemic obstacles to fully harness the potential of digital tools in implementing CE. This transition aligns with the broader ambitions of the European Green Deal and the EU Digital Strategy, aiming to create a more sustainable, efficient, and resilient construction industry. By addressing these challenges and leveraging digitalisation, the construction sector can make a significant contribution to a sustainable and circular economy, ultimately benefiting both the environment and society.


  • Open Access

    Durability effect of reclaimed asphalt aggregate on concrete road pavement

    by Tayfun Uygunoğlu, İlKer Bekir Topçu, Emriye Çinar Resuloğullari

    The use of recycled aggregates instead of natural aggregates used in concrete reduces environmental pollution and concrete costs. Recycled Asphalt Pavement (RAP) aggregate used as recycled aggregate has a lower water absorption than natural aggregate due to its bituminous structure, which reduces the water requirement of fresh concrete. In this study, it was aimed to determine the optimum use of RAP particles as aggregate in concrete for read pavements and to determine their durability properties. For this purpose, RAP was used instead of crushed stone aggregate used in concrete road construction. RAP was used by replaced aggregate 0%, 25%, 50% and 100% of the crushed stone aggregate used on the concrete road. The dose of the produced concrete was 350 kg/m3 and the water/cement ratio was kept constant as 0.45. The fresh workability and air content of concretes containing RAP were determined. Compressive strength, splitting tensile strength, electrical resistivity value, accelerated corrosion test of hardened concretes were subjected to corrosion resistance, water absorption and porosity percentage, acid resistance, ultrasonic pulse rate and Scanning Electron Microscope (SEM) and X-ray Diffractometer (XRD) analyzes were determined. In the experimental results, it has been observed that the use of RAP ratio of 25% and 50% remains within the limit values for concrete pavement. It is recommended to be used on reinforced concrete roads that will be exposed to adverse environmental conditions with its high corrosion resistance, thanks to its anti-corrosion feature.


  • Open Access

    Investigation of Self-Compacting Concrete Behaviour Under Axial Load by Acoustic Emission Method

    by Emriye Çinar Resuloğullari, Behçet Dündar

    The Acoustic Emission (AE) method is a non-destructive test method used when monitoring the damage propagation by detecting high-frequency elastic waves produced by the refraction process. Self-Compacting Concrete (SCC) is a special type of concrete that does not require vibration, has excellent fluidity, and is resistant to segregation. In this study, it is aimed to investigate the functioning of the AE technique, which is frequently used in normal concrete, in the behaviour of SCC. For this purpose, simultaneous monitoring of SCCs under uniaxial compressive load was carried out with the AE method. CEM I 42.5 R cement was used as a binder in the production of concrete, and Fly Ash (FA) and Marble Powder (MP) were used as mineral additives. In SCC mixture, stone dust was used as filler material and chemical additive Sika brand 4567 Hi-Tech was used as plasticizer. Cement dosage is 400 kg, water/powder ratio is 0.36, chemical additive ratio is 1.85%, and stone dust amount is 125 kg. The mineral additives which were used included in the mixture replaced with cement by 20%. In addition to the compressive strength of SCCs, crack analysis, AE amplitude, AE Energy, Ringing Counts and Cumulative Count results were examined as a result of AE measurements. With the AE parameters obtained as a result of the simultaneous measurement, the behaviour of SCCs under uniaxial load was successfully monitored.

  • Open Access

    Öğütülmüş Pomza Tozlu Harçların Hidroklorik Asit Direncinin İncelenmesi

    by Meryem Rumeysa Kayihan, Behcet Dündar, Emriye Çinar Resuloğullari

    Bu çalışmada, Öğütülmüş Pomza Tozlu (ÖPT) harçların Hidroklorik (HCI) asit direnci araştırılmıştır. Harç karışımlarının hazırlanmasında bağlayıcı olarak CEMI-42.5/R Portland Çimentosu, agrega olarak ise 0-4 mm tane boyutunda kırma kum kullanılmıştır. Mineral katkı olarak ÖPT, çimento ile ağırlıkça %0, %10, %20 ve %30 oranlarında ikame edilerek harç numuneleri üretilmiştir. Asit etkisinin araştırılmasında hacimce %5 derişikteki HCl asit kullanılmıştır. Taze haldeki harç numunelerine yayılma deneyi uygulanmıştır. Harç numuneleri 7, 28 ve 90 gün boyunca standart kür havuzunda bekletilmiş ve 28 ve 90. gününü dolduran numunelerin birim hacim ağırlık, su emme ve porozite oranları belirlenmiştir. 7, 28 ve 90. gününü dolduran numunelere eğilme ve basınç deneyleri yapılmıştır. Standart kür havuzunda 28 gün bekletilen numuneler daha sonra, HCI asit küründe 7, 28 ve 90 gün sonunda eğilme ve basınç deneyleri yapılmıştır. HCl asitte, 28 ve 90. gününü dolduran numunelerin birim hacim ağırlık, su emme ve porozite oranları belirlenmiştir. Sonuç olarak, ÖPT ikame oranının artmasıyla referans numuneye göre yayılma değerinde, birim hacim ağırlık, eğilme ve basınç dayanımında azalma, su emme ve porozite oranları ise artış gözlemlenmiştir. HCI asit çözeltisinde 7 gün bekleme süresinde numunelerin basınç dayanımları ÖPT ikame oranının artmasıyla artış gerçekleşirken, 28. ve 90 günlük bekleme sürelerinde azalış meydana gelmiştir.