Xinke Zhu

Mobile Earthquake Recording in Marine Areas by Independent Divers (MERMAID) provides a possibility for long-term and large-scale observation of natural seismic P waves, but it does not have mobility and can only drift with ocean currents, resulting in observation equipment locations that are too sparse or too dense, both of which are not suitable for network observation. Therefore, this paper developed a new type of Autonomous Glide Marine Seismometer (AGMS) with mobility and the ability to adjust the observation position. The AGMS adopts a flying saucer shape, which has better hydrodynamic characteristics and better motion stability. This paper focused on the material, shape, and structure of the pressure-resistant shell for the selection of design and strength checking research. Using the finite element analysis method and introducing the initial defect, the results showed that the yield strength of the pressure-resistant shell decreases with the initial defect value. The calculation results were compared and analyzed with the relevant theoretical formulas and specification calculation results, and all the results met the design requirements. The results of this design could also provide reference for the design of related deep-sea pressure chambers.

According to the development needs of marine seismic station networking, it is necessary to develop a marine seismometer with a networking function to realize quasi-real-time and large-scale long-term observation of undersea seismic signals. This can lay a solid foundation for marine seismic research and research on earth tectonics, activities, and processes. Based on the advantages and disadvantages of the existing observation equipment, this study proposed to develop a new type of the Autonomous Glide Marine Seismometer(AGMS) that can be applied to the global sea area, focusing on the design and study of the main structure of the carrier of the AGMS. The ultimate strength of the ellipsoidal pressure-resistant spherical shell is investigated by using the finite element analysis method. A reasonable finite element analysis model is proposed through comparing the finite element parameter results with the theoretical formulas and relevant specifications. Finally, the design process and strength checking of the pressure-resistant shell of the AGMS are established. These relevant results can also provide a reference for the design of other deep-sea pressure-resistant chambers.

In order to meet the requirements of mobile marine seismometers to observe and record seismic signals, a study of fast and accurate seismic signal recognition was carried out. This paper introduces the use of the wavelet analysis method for seismic signal processing and recognition, and compares and analyzes the abilities of different wavelet basis functions to detect the seismic signal. By denoising and reconstructing the signal, the distribution law of the wavelet coefficients of seismic signal at different scales was obtained. On this basis, this paper proposes an identification model of seismic signals based on wavelet analysis and thereby solves the conflict between high speed and high accuracy of seismic signal recognition methods. In this study, the simulation was carried out in the Matlab2020b environment, and the feasibility of wavelet recognition algorithm was proven by applying this algorithm to the seismic signal database for experimental verification.

Floating ocean seismograph (FOS) is a vertical underwater vehicle used to detect ocean earthquakes by observing P waves at teleseismic distances in the oceans. With the requirements of rising to the surface and transmitting data to the satellite in real time and diving to the desired depth and recording signals, the depth control of FOS needs to be zero overshoot and accurate with fast response. So far, it remains challenging to implement such depth control due to the variation of buoyancy caused by the seawater density varying with the depth. The deeper the water is, the greater the impacts on buoyancy are. To tackle it, a fuzzy sliding mode controller considering the influence of seawater density change is proposed and simulated in MATLAB/SIMULINK based on the variable buoyancy system and state space function of FOS. Compared with proportional-integral-derivative (PID) controller, fuzzy PID controller and sliding mode controller, the simulation results indicate that the proposed controller shows its superiority regardless of the disturbing force. Its advantages include smaller steady-state error, faster response time, smaller system chatter, and well robustness. This proves that the designed fuzzy sliding mode controller is able to meet the working requirements and thus, lays a foundation for FOS application.