FCFan Chen

Fan Chen

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Fan Chen has a total of 24 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Analysis and Optimized Design of a Novel Compact Orthogonal Controllable Reactor

    by Jiaxin Yuan, Xianfeng Zheng, Fan Chen

    Orthogonal controllable reactors (OCRs) have the ad-vantages of low distortion and linear inductance regulation. However, traditional OCRs suffer from two vital problems, namely, their small inductance regulation range and large space occupation. To solve these issues, a new compact OCR is proposed in this study. First, the magnetic circuit of the reactor is established through theoretical analysis. Second, the simulation model is established and the inductance regulation characteristics of the reactor are obtained. Third, the key parameters are optimized for better performance based on Pareto optimality and a genetic algorithm. Finally, based on the optimized parameters, a new prototype of the OCR is developed and experimental work is carried out to verify the analysis. The results show that, compared with the traditional model, with the same material consumption, the space occupation of the new topology is reduced by 53.7% and the inductance regulation range is increased by 69%. Experimental results also show that increasing the area of the orthogonal region can significantly in-crease the inductance regulation range of the reactor. Based on the OCR, the filter with a variable resonance frequency can be formed, which is of significant application value in situations where the harmonic frequency is constantly changing.


  • A New Type of Fast-Response Fault Current Limiter Topology for HVDC Application

    by Hechong Chen, Jiaxin Yuan, Fan Chen, Zhewei Zhang

    The inductance of a permanent magnet-biased saturated fault current limiter (PMFCL) increases automatically with the fault current. It can quickly restrain the rising speed of direct current (DC) fault current. However, when the DC circuit breaker (DCCB) opens, the PMFCL will delay the current drop speed and generate overvoltage, which will increase the voltage stress on the DCCB. In this paper, a new type of fast-response FCL (NFCL) is proposed. It has the advantage of improving the fault current drop speed. Besides, it can reduce DCCB overvoltage, thus protecting the expensive insulated gate bipolar transistors (IGBT) in the DCCB. In addition, it greatly reduces the energy absorption in the DCCB, thus reducing its manufacturing cost. The NFCL operates automatically without a control device, which means that it responds faster. Moreover, the diode is on the low-voltage side, meaning that insulation manufacturing cost can be reduced. First, the working principle of NFCL cooperation with the DCCB is introduced. Then the main electromagnetic parameter design requirements of the NFCL are analyzed. Their feasibility is verified by electromagnetic circuit simulation, and a prototype is built and tested. Finally, the experimental and simulation results show that NFCL can improve current drop speed effectively.


  • A Novel Fast Energy Storage Fault Current Limiter Topology for High-Voltage Direct Current Transmission System

    by Hechong Chen, Jiaxin Yuan, Hang Zhou, Shunkai Xu, Chunhang Zou, Fan Chen

    The traditional saturated core type fault current limiters (TFCLs) cause large energy absorption and high overvoltage in direct current circuit breakers (DCCBs). Energy absorbing FCLs (AFCLs) cause coils to bear the fault current for a long period and the fault energy absorption is slow. In order to solve the problems of TFCLs and AFCLs, a novel fast energy storage dc FCL (EFCL) topology is proposed in this article. The EFCL not only reduces the overvoltage and energy absorption of DCCBs but also quickly stores energy. First, the working principle and topology of the EFCL are proposed. The design requirements of the main electrical and core size parameters are then analyzed. Then, the key electrical parameters are optimized by electromagnetic circuit simulations. The economy is analyzed. Finally, the whole process simulation and FCL comparison simulation are carried out. The feasibility of the EFCL is verified by the comparison of simulation with experiment.


  • Hybrid-Material Based Saturated Core FCL in HVDC System: Modeling, Analyzing and Performance Testing

    by Hang Zhou, Jiaxin Yuan, Fan Chen

    In order to limit the extremely fast rising trend of fault current in a high voltage direct current system, a permanent magnet (PM) biased dc saturated core fault current limiter (DCSFCL) was proposed previously. However, the demagnetization problem of the PM and compromised fault limiting inductance value caused by the inserted PMs are two major issues that need to be solved. In this article, a hybrid-material based fault current limiter (HMFCL) is proposed. First, by means of reconstructing the iron core topology and substituting different soft magnetic materials with their hybrid benefits, the proposed novel HMFCL can present instant change in fault limiting inductance value without threating the safety of the PMs. Then, the Jiles-Atherton hysteresis modeling technique is applied on the HMFCL and its electromagnetic feature is analyzed. The parameters of HMFCL are optimized using genetic algorithm as well. Finally, the effectiveness of the proposed HMFCL is proved by various device and system level simulations as well as a prototype experiment. Results reveal that the proposed HMFCL can limit the fault current by over 80% compared with traditional smoothing reactor.


  • A Novel Modularization Design Method of PM Biased SCFCL Considering Leakage Flux Effect and Permeance Matrix Modeling

    by Hang Zhou, Jiaxin Yuan, Fan Chen, Zhou Ni, Zhaoyang Zhang, Tie Chen

    A DC system saturated core fault current limiter (DCSFCL) was proposed to limit the fast rising trend of fault current in HVDC system. However, traditional method to calculate and design the DCSFCL tend to neglect leakage flux around the permanent magnet (PM), leading to large calculation error and inappropriate design procedure. The novel contribution of this paper is that it proposed a modularization method to analyze the permeance of both PM and adjacent air. Hence, the leakage flux effect is considered properly and a more accurate permeance matrix can be derived in a pure mathematical way. In this case, DCSFCL can be calculated much faster than the FEA simulation program with a promising accuracy regarding fault limiting performance. More importantly, design flow of the DCSFCL and related PM biased devices was given as well. Calculation result shows that inductance value calculated by the proposed method has less than 1% error compared with fine meshed FEA simulation result and about 20% increase in accuracy compared with traditional method that neglects PM leakage flux effect. Prototype of the DCSFCL was also built and experimental tests were carried out to verify the correctness of the proposed method.


  • Open Access

    Inductive Fault Current Limiters in VSC-HVDC Systems: A Review

    by Hang Zhou, Jiaxin Yuan, Fan Chen, Baichao Chen

    Fast emerging fault current levels in high voltage direct current (HVDC) systems has always been a significant obstacle to building a safer and more reliable grid. Inductive fault current limiters (FCLs), compared with its resistive counterpart, are very effective in restricting the fault rising speed that causes major damage during the whole fault process. In this study, a comprehensive review of the methods used for building inductive type FCLs in HVDC systems is presented. The fault current characteristics of the modern HVDC system is discussed to obtain the basic requirements for the FCL. On the basis of different technological domains, various inductive-type FCL topologies and devices are well categorized and analyzed. After the overall discussion and comparison, representative works, as well as new progress and future prospects, are conveyed in detail. One may find the content of this study helpful as a detailed literature review or a practical technical guidance of this field.


  • The optimal type of online channel considering showrooming

    by Yongmei Liu, Meng Gao, Chen Fan

    Considering the common market phenomenon "showrooming", this paper studies the optimal type of online channel under the supply chain with one manufacturer and two retail channels. There are two types of online channel, which are the reseller channel and the marketplace channel. Our conclusions are as follows. In the presence of showrooming, first, the marketplace channel increases the profit of the supply chain; second, if the platform fee is not high enough, the manufacturer prefers to adopt the marketplace channel; finally, if the platform fee is intermediate, the marketplace channel is a win-win strategy for the manufacturer and the online retailer. In the absence of showrooming, if the platform fee is low enough, the marketplace channel increases the profit of the supply chain; if the platform fee is high enough, the reseller channel increases the profit of the supply chain.


  • Narrow band optical filter using Goos–Hänchen shift in a cascaded waveguide structure

    by Mincheng Tang, Maowu Ran, Fan Chen, Xianping Wang, Honggen Li, Xianfeng Chen, Zhuangqi Cao


  • QoS Aware Packet Scheduling Algorithm for OFDMA Systems

    by Haipeng Lei, Chen Fan, Xin Zhang, Dacheng Yang

    In this paper, a downlink packet scheduling algorithm for OFDMA systems is proposed, which is based on the utility function to guarantee both the packet drop ratio and the play-out outage ratio of video streaming service. The existing algorithms, both modified-largest weighted delay first (M-LWDF) and exponent proportional fair (EXP/PF) rule can achieve good results in terms of head-of-line (HOL) packet delay, which affects the packet drop ratio. However, they can not consider the play-out outage ratio. Simulation results show that our proposed algorithm outperforms the existing scheduling algorithms in term of packet drop ratio and play-out outage ratio.