RMRennan Bianchetti Morales

Rennan Bianchetti Morales

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Rennan Bianchetti Morales has a total of 664 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Overview of the outcomes of the EUROfusion Enabling Research project on real-time reflectometry plasma tracking for next-generation machines

    by F da Silva, J M Santos, A Silva, J Ferreira, E Ricardo, S Heuraux, R Sabot, F Clairet, Y Moudden, G De Masi, et al.

    Reflectometry is anticipated to play a significant role in plasma positioning, shaping, and tracking for DEMOnstration power plant, potentially replacing magnetic diagnostics. We present an overview of the outcomes of the EUROfusion Enabling Research (EnR) project ENR-04-IST-01, a coordinated effort of European experts and developers of reflectometry systems, whose main results were: (i) the proof of principle of a new diagnostic concept able to track and monitor the position and shape of the plasma in the initial stage of the discharge, in the start-up phase, and also at the ramp-down phase; and (ii) the improvement of the capabilities of operation in the stationary phase (flattop) to provide an accurate and precise substitute for the positioning magnetic diagnostics in real-time. Important advances have also been achieved in finite-difference time-domain simulation codes, allowing access to two-dimensional and three-dimensional sophisticated reflectometry simulations; and in the development, manufacturing, and testing of antenna prototypes. An important issue addressed was the synchronisation between different reflectometers with the start of an experimental validation on the Tungsten (W) Environment in Steady-state Tokamak. We also describe the advances in hardware, leading to a redesigned, assembled and tested prototype of a compact coherent fast frequency sweeping radio frequency back-end using commercial monolithic microwave integrated circuits, with the integration of direct digital synthesis as continuing work. Another result was the conception of an integrated design workflow for the design, evaluation and implementation of microwave diagnostic systems and its application in the assessment of plasma position reflectometers for high field and low field sides of the divertor test tokamak.

  • Open Access

    Impact of nitrogen injection on L–H transitions in JET with a Be/W wall

    by C F Maggi, C Bourdelle, E Delabie, M Brix, P Carvalho, F Casson, A Chankin, N Hawkes, E Litherland-Smith, S Menmuir, et al.

    L–H transition experiments in JET with a Be/W wall (JET-ILW), with N 2 injection into the divertor region, have revealed that the H-mode power threshold, P L–H , increases with N 2 injection rate in the high-density branch and modifies the density at which the power threshold is minimum, n e,min . P L–H values approaching those obtained in JET with a C wall are achieved for a sizeable increase in N concentration. At a given density in the high-density branch of P L–H , both the total loss power ( P loss ) and the power crossing the separatrix ( P sep ) at the L–H transition increase by a factor of ∼1.5 at high N 2 levels. At a given line-averaged density, while the edge density is similar in plasmas with and without N 2 injection, the edge temperature at the L–H transition is higher in pulses with high N seeding levels and a larger shear of the edge radial electric field E r is measured. At low N concentrations, little change in P L–H is observed. Qualitative agreement is reported with the impact of Z eff on L-mode edge turbulence drive (Bourdelle et al 2015 Nucl. Fusion 55 073015). The enhanced L-mode edge turbulence drive with N 2 seeding at higher Z eff implies that a higher P L–H is expected as, indeed, has been measured in experiments. It is assumed that the mean equilibrium E r × B shear is a key player in the reduction of L-mode edge turbulence, leading to the L–H transition. In this framework, the L–H transition observations in JET-Be/W + N 2 are interpreted by an increase in L-mode edge plasma turbulence with increased N concentration and the need for a larger stabilizing E r × B shear, and thus a higher P sep , to trigger the L–H transition. For future fusion reactors having scenarios with extrinsic low-Z impurity seeding for mitigation of divertor heat load our results suggest the need to predict P sep for H-mode access taking into account not only the high radiation fractions from the bulk plasma but also the impact of low- Z impurity concentration on P loss and P sep at the L–H transition.

  • Open Access

    Overview of the MAST Upgrade physics programme: testing novel concepts at low aspect ratio to inform future devices

    by J.R. Harrison, A. Aboutaleb, M. Aljunid, S.Y. Allan, R. Allan, A. Alli, H. Anand, Y. Andrew, L.C. Appel, A. Ash, et al.

    The research programme performed on the Mega Amp Spherical Tokamak (MAST) Upgrade experiment has made significant advances in developing the physics understanding of low aspect ratio tokamaks in support of the operation of ITER and design of fusion powerplants. High performance plasma scenarios have been developed to facilitate a broad programme of experiments, in which confinement is constrained by the presence of m / n = 2/1 modes that cause substantial losses of fast ions. The onset of these modes coincides with the q = 2 surface residing in a local minimum in the toroidal current density profile. The maximum electron temperature at the pedestal top, T e,ped is limited with gas fuelling to ∼350 eV to maintain regular ELMs; higher T e,ped results in a transition to a non-stationary ELM-free regime. The operational space of spherical tokamaks has been expanded into small and ELM-free regimes. Strong shaping of the last closed flux surface can induce a transition from large to small ELMs, and ELM suppression with resonant magnetic perturbations has been observed for the first time in a low aspect ratio tokamak. Negative triangularity shaping has induced a transition from ELMy H-mode to a high-performance L-mode regime for the first time in a low aspect ratio tokamak. In studies of fast ion confinement, losses of fast particles due to Global Alfvén Eigenmodes have been identified. Interactions between fast ions generated by off-axis neutral beam injection and thermal neutrals can result in significant losses of fast ions. Experiments with on- and off-axis neutral beam injection exhibit a flux pumping mechanism, where the central safety factor is held to ∼1 in the absence of sawteeth. In studies of pedestal physics, it has been found that elevated main chamber neutral pressures result in an increase in the electron density and reduction in the temperature at the pedestal top. Advances in understanding plasma exhaust include the integration of a high-performance plasma core with detached outer divertors in the X -point target configuration. A newly commissioned lower divertor cryopump reduces the lower divertor neutral pressure by up to 50%, with minimal effect on the main chamber or upper divertor. New measurements and SOLPS-ITER simulations emphasise the importance of plasma–neutral interactions on divertor detachment in the conditions accessible in experiments. Real-time control of the ionisation front location in both divertor chambers independently has been demonstrated in double null experiments, enabled by the tightly baffled divertor chambers.


  • Density profile reconstruction methods for extraordinary mode reflectometry

    by Rennan Bianchetti Morales

    Méthodes de reconstruction du profil de densité pour la réflectométrie en mode extraordinaire: Le but de cette thèse est d'améliorer les techniques d'analyse de données de la réflectométrie à balayage de fréquence pour la détermination du profil de densité des plasmas de fusion. Au cours des deux dernières décennies, des améliorations significatives ont été apportées sur la partie matérielle et sur d'extraction des signaux, mais l'analyse des données est en retard et nécessite d'autres améliorations pour répondre aux spécifications exigées pour un fonctionnement en continu des futurs réacteurs. Les améliorations obtenues lors de ce travail de thèse sur la reconstruction des profils de densité fournissent une meilleure précision en un temps plus court ceci même en présence de trou de densité conduisant à une mesure des propriétés de la turbulence suffisamment précise pour valider des modèles numériques et permettant la surveillance en temps réel de la forme et de la position du plasma

  • Open Access

    From electron cyclotron emission and reflectometry to microwave imaging diagnostics in fusion plasmas: Progress and perspectives

    by Alf Köhn-Seemann, Rennan B. Morales

    Microwave diagnostics will be one of the few diagnostic techniques that can be operated in future fusion devices. In the past, they have contributed significantly to the understanding of the plasma dynamics, in particular electron cyclotron emission (ECE) and reflectometry. While these provide 1D measurements of plasma electron temperature and density along a line of sight, the advancement of electron cyclotron emission imaging (ECEI) and microwave imaging reflectometry (MIR) allows to obtain 2D images with high temporal and spatial resolution. Recent technological improvements will not only reduce the overall dimensions of these systems, thereby fulfilling requirements of future fusion devices, but also increase their sensitivity, reduce their costs, and ease maintenance, which increases operational time of the devices they are installed on. This paper aims to present an overview of ECE diagnostics and reflectometry. It first discusses their 1D implementations, followed by a more detailed examination of ECEI and MIR, including recent developments, and a perspective on future directions.


  • Open Access

    Non-linear dependence of ion heat flux on plasma density at the L–H transition of JET NBI-heated deuterium–tritium plasmas

    by P. Vincenzi, E.R. Solano, E. Delabie, C. Angioni, G. Birkenmeier, C. Maggi, R.B. Morales, H.J. Sun, E. Tholerus, Jet Contributors

    Recent JET D–T campaigns opened the possibility of unique isotope studies to investigate the L–H transition physics in view of reactor plasmas and to study the origin of the observed power threshold minimum. In the present paper, we characterise L–H transitions in the low and high-density branches of JET NBI-heated D–T plasmas. As discussed in the paper, L–H transition has been hypothesised to be determined by the transport power losses of plasma ions, i.e. the so-called ion heat flux (Q i). We present the first power balance analysis of JET NBI-heated D–T plasmas to evaluate the ion heat flux at the transition. Due to the experimental setting being similar to previous JET D experiments, we also directly compare the results, discussing the isotope effect and similarities between datasets. First, we find an isotope effect between D and D–T Q i, with a lower Q i in D–T plasmas. We confirm that the ion heat flux deviates from density linearity compared to the linear trend observed in wave-heated D plasmas of other tokamaks. The deviation we observe in NBI-heated L–H transitions happens at an isotope-dependent density. Plasma edge rotation correlates with Q i deviation from density linearity in the low-density branch. However, further investigations would be required to assess the role of rotation on Q i and the power threshold minimum at JET. At low plasma density, NBI power dominates Q i, while increasing the density makes the equipartition power dominant. We finally compare our results with hypotheses proposed from evidence in other tokamaks to present a complete overview of ion heat flux analyses in D and D–T NBI-heated plasmas at JET.


  • Open Access

    The core–edge integrated neon-seeded scenario in deuterium–tritium at JET

    by C. Giroud, I.S. Carvalho, S. Brezinsek, A. Huber, D. Keeling, J. Mailloux, R.A. Pitts, E. Lerche, R. Henriques, J. Hillesheim, et al.

    This paper reports the first experiment carried out in deuterium–tritium addressing the integration of a radiative divertor for heat-load control with good confinement. Neon seeding was carried out for the first time in a D–T plasma as part of the second D–T campaign of JET with its Be/W wall environment. The technical difficulties linked to the re-ionisation heat load are reported in T and D–T. This paper compares the impact of neon seeding on D–T plasmas and their D counterpart on the divertor detachment, localisation of the radiation, scrape-off profiles, pedestal structure, edge localised modes and global confinement.


  • Open Access

    Fuelling of deuterium–tritium plasma by peripheral pellets in JET experiments

    by M. Valovič, S. Aleiferis, P. Blatchford, A. Boboc, M. Brix, P. Carvalho, I. Carvalho, M. Fontdecaba Climent, D. Dunai, L. Frassinetti, et al.

    A baseline scenario of deuterium–tritium (D–T) plasma with peripheral high-field-side fuelling pellets has been produced in JET in order to mimic the situation in ITER. The isotope mix ratio is controlled in order to target the value of 50%–50% by a combination of tritium gas puffing and deuterium pellet injection. Multiple factors controlling the fuelling efficiency of individual pellets are analysed, with the following findings: (1) prompt particle losses due to pellet-triggered edge-localised modes (ELMs) are detected, (2) the plasmoid drift velocity might be smaller than that predicted by simulation, (3) post-pellet particle loss is controlled by transient phases with ELMs.The overall pellet particle flux normalised to the heat flux is similar to that in previous pellet fuelling experiments in AUG and JET.


  • Open Access

    Improved accuracy and robustness of electron density profiles from JET’s X-mode frequency-modulated continuous-wave reflectometers

    by R. B. Morales, A. Salmi, P. Abreu, C. H. S. Amador, L. Appel, P. Carman, J. Fessey, J. Flanagan, M. Fontana, L. Frassinetti, et al.

    JET’s frequency-modulated continuous wave (FMCW) reflectometers have been operating well with the current design since 2005, and density profiles have been automatically calculated intershot since then. However, the calculated profiles had long suffered from several shortcomings: poor agreement with other diagnostics, sometimes inappropriately moving radially by several centimeters, elevated levels of radial jitter, and persistent wriggles (strong unphysical oscillations). In this research, several techniques are applied to the reflectometry data analysis, and the shortcomings are significantly improved. Starting with improving the equilibrium reconstruction that estimates the background magnetic field, adding a ripple correction in the reconstructed magnetic field profile, and adding new inner-wall reflection positions estimated through ray-tracing, these changes not only improve the agreement of reconstructed profiles to other diagnostics but also solve density profile wriggles that were present during band transitions. Other smaller but also persistent wriggles were also suppressed by applying a localized correction to the measured beat frequency where persistent oscillations are present. Finally, the burst analysis method, as introduced by Varela et al. [Nucl. Fusion 46 S693 (2006)], has been implemented to extract the beat frequency from stacked spectrograms. Due to the strong suppression of spurious reflections, the radial jitter that sometimes would span several centimeters has been strongly reduced. The stacking of spectrograms has also been shown to be very useful for stacking recurring events, like small gas puff modulations, and extracting transport coefficients that would otherwise be below the noise level.


  • Open Access

    Isotope mass scaling and transport comparison between JET Deuterium and Tritium L-mode plasmas

    by T. Tala, A.E. Järvinen, C.F. Maggi, P. Mantica, A. Mariani, A. Salmi, I.S. Carvalho, A. Chomiczewska, E. Delabie, F. Devasagayam, et al.

    The dimensionless isotope mass scaling experiment between pure Deuterium and pure Tritium plasmas with matched ρ ∗ , ν ∗ , β n , q and T e / T i has been achieved in JET L-mode with dominant electron heating (NBI+ohmic) conditions. 28% higher scaled energy confinement time B t τ E , t h / A is found in favour of the Tritium plasma. This can be cast in the form of the dimensionless energy confinement scaling law as Ω i τ E , t h ∼ A 0.48 ± 0.16 . This significant isotope mass scaling is consequently seen in the scaled one-fluid heat diffusion coefficient A χ e f f / B t which is around 50% lower in the Tritium plasma throughout the whole plasma radius. The isotope mass dependence in the particle transport channel is negligible, supported also by the perturbative particle transport analysis with gas puff modulation. The comparison of the edge particle fuelling or ionisation profiles from the EDGE2D-EIRENE simulations show that the absolute density differences that are necessary for the dimensionless match in the confined plasma dominate over any isotope mass dependencies of particle fuelling and ionization profiles at the plasma edge. Local GENE simulation results indicate a mild anti-gyroBohm effect at ρ t o r = 0.6 and thereby a small isotope mass dependence in favour of Tritium on heat transport and a negligible effect on particle transport. A significant fraction of the isotope scaling and reduced heat transport observed in the Tritium plasma is not captured in the GENE and ASTRA-TGLF-SAT2 simulations by simply changing the isotope mass for the same input profiles.