Adele R. Latypova
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Adele R. Latypova has a total of 59 co-authors. Here are the top co-authors by number of shared publications:
- Valentin Yu. Doluda
Тверской государственный технический университет
6 shared publications - Dmitriy V. Filippov
Ivanovo State University of Chemistry and Technology
4 shared publications Olga V. Lefedova
4 shared publications- Olga V. Lefedova
Ivanovo State University of Chemistry and Technology, Ivanovo, Russia
4 shared publications - Alexander I. Sidorov
Department of Biotechnology, Chemistry and Standardization, Tver State Technical University, 22 A. Nikitina Str., 170026 Tver, Russia
2 shared publications Alexey V. Bykov
2 shared publications
Latest Publications
- 1 April 2026
- Published by Allerton Press in Solid Fuel Chemistry
- Vol. 60 (2) , 99-104
Pyrolysis of Methane on Ni–La–Cu–Al2O3 and Ni–Fe–Cu–Al2O3 Catalysts
The two methane pyrolysis catalysts 80% Ni–5% La2O3–5% Cu–10% Al2O3 and 70% Ni–10% Fe–10% Cu–10% Al2O3, which were obta
- 1 April 2026
- Published by Allerton Press in Solid Fuel Chemistry
- Vol. 60 (2) , 99-104
Pyrolysis of Methane on Ni–La–Cu–Al2O3 and Ni–Fe–Cu–Al2O3 Catalysts
The two methane pyrolysis catalysts 80% Ni–5% La2O3–5% Cu–10% Al2O3 and 70% Ni–10% Fe–10% Cu–10% Al2O3, which were obta
- 12 January 2026
- Published by Elsevier in Measurement
- Vol. 265
Enhanced surfactant detection using microbial biosensor: new applications of conducting polymers and their nanocomposites
- 12 January 2026
- Published by Elsevier in Measurement
- Vol. 265
Enhanced surfactant detection using microbial biosensor: new applications of conducting polymers and their nanocomposites
- 12 November 2025
- Published by Springer Nature in Reaction Kinetics, Mechanisms and Catalysis
- Vol. 139 (2) , 1249-1273
Palladium catalysts on amino-modified silica in application to the hydrogenation of p-nitroaniline
- 12 November 2025
- Published by Springer Nature in Reaction Kinetics, Mechanisms and Catalysis
- Vol. 139 (2) , 1249-1273
Palladium catalysts on amino-modified silica in application to the hydrogenation of p-nitroaniline
- Open Access
Sol-Gel Synthesis of Organically Modified Silica Particles as Efficient Palladium Catalyst Supports to Perform Hydrogenation Process
Modern approaches to the production of new materials require the improvement of synthesis techniques towards simplifying the processes of their preparation and reducing the number of stages. Thus, in this study, one-stage synthesis of organomodified silica materials is developed using a special surfactant—dodecyldimethylamin N-oxide (DDAO). The peculiarity of this approach is that there is no need for heat treatment of the material, since DDAO is removed by washing in alcohol. Amino-, mercapto-, methyl-, and phenyl-modified silicas were synthesized using this method. The SEM images showed the morphology of all the obtained materials is close, all particles are spherical, and the diameter of individual particles is about 500 nm. Palladium particles were precipitated on these supports, then the experiments were carried out to study the catalytic activity of these materials in a model reaction of nitroaniline reduction. The phenyl modified matrix-based materials showed very low activity. This is due to the fact that the support and the substrate contain aromatic fragments, thus, hydrophobic interactions arise between them, which complicates the diffusion of the products. The leader is a matrix with an amino fragment, which is associated with its electron-donor effect. The XPS method revealed the amount of fixed palladium, as well as the binding energy shifts, which are 0.68 eV for 5% Pd/SiO2–C6H5; 0.56 eV for 5% Pd/SiO2–C3H6–NH2; 0.26 eV for 5% Pd/SiO2–CH3; and 0.13 eV for 5% Pd/SiO2.
Open AccessSol-Gel Synthesis of Organically Modified Silica Particles as Efficient Palladium Catalyst Supports to Perform Hydrogenation Process
Modern approaches to the production of new materials require the improvement of synthesis techniques towards simplifying the processes of their preparation and reducing the number of stages. Thus, in this study, one-stage synthesis of organomodified silica materials is developed using a special surfactant—dodecyldimethylamin N-oxide (DDAO). The peculiarity of this approach is that there is no need for heat treatment of the material, since DDAO is removed by washing in alcohol. Amino-, mercapto-, methyl-, and phenyl-modified silicas were synthesized using this method. The SEM images showed the morphology of all the obtained materials is close, all particles are spherical, and the diameter of individual particles is about 500 nm. Palladium particles were precipitated on these supports, then the experiments were carried out to study the catalytic activity of these materials in a model reaction of nitroaniline reduction. The phenyl modified matrix-based materials showed very low activity. This is due to the fact that the support and the substrate contain aromatic fragments, thus, hydrophobic interactions arise between them, which complicates the diffusion of the products. The leader is a matrix with an amino fragment, which is associated with its electron-donor effect. The XPS method revealed the amount of fixed palladium, as well as the binding energy shifts, which are 0.68 eV for 5% Pd/SiO2–C6H5; 0.56 eV for 5% Pd/SiO2–C3H6–NH2; 0.26 eV for 5% Pd/SiO2–CH3; and 0.13 eV for 5% Pd/SiO2.
- 1 January 2021
- Published by Ivanovo State University of Chemistry and Technology in ChemChemTech
- Vol. 64 (10) , 105-112
SYNTHESIS OF POLYANILINE, POLYPHENYLENEDIAMINE, POLYTOLUIDINE AND TEXTILE COMPOSITE MATERIALS ON THEIR BASIS
Двухстадийным процессом, основанным на жидкофазной гетерогенно-каталитической гидрогенизации нитробензола, п-нитротолуола и п-нитроанилина в водном растворе 2-пропанола c получением соответствующих аминов и последующей окислительной полимеризации полученных аминов в водно-спиртовом растворе соляной кислоты в присутствии окисляющих агентов – персульфата аммония и бихромата калия были получены полианилин, политолуидин, полифенилендиамин. Структура полученных полимеров подтверждена с помощью метода ИК-спектроскопии. Исследование термических свойств полученных полимеров проводили методами термогравиметрического анализа и дифференциально-сканирующей калориметрии. Показано, что полиамины термостабильны в интервале температур 250-350 °С. Для изучения электроповодности полученных полиаминов был использован метод кондуктометрии. Показано, что при использовании бихромата калия полученный продукт обладал меньшей проводимостью по сравнению с полимером, полученным при использовании персульфата аммония. В дальнейшем, синтезированные полимеры были использованы для получения текстильных композиционных материалов на основе текстильных волокон. На первой стадии получения данных материалов хлопковое и льняное волокна были покрыты пленкой полиамида-6, как легирующей добавки, повышающей механическую прочность и фотоустойчивость. Для нанесения пленки были использованы растворы полиамида-6 в концентрированной муравьиной кислоте двух концентраций – 2,4 ммоль/л, 0,5 ммоль/л. На второй стадии на полиамидную пленку был нанесен слой обработанных полиаминов. Поверхность полученных композиционных материалов была исследована методом электронной микроскопии. Анализ волокон хлопка и льна, обработанных раствором полиамида-6 различной концентрацией показал, что при увеличении концентрации раствора полиамида возрастает упорядоченность волокон и целостность всего пучка.
- 1 January 2021
- Published by Ivanovo State University of Chemistry and Technology in ChemChemTech
- Vol. 64 (10) , 105-112
SYNTHESIS OF POLYANILINE, POLYPHENYLENEDIAMINE, POLYTOLUIDINE AND TEXTILE COMPOSITE MATERIALS ON THEIR BASIS
Двухстадийным процессом, основанным на жидкофазной гетерогенно-каталитической гидрогенизации нитробензола, п-нитротолуола и п-нитроанилина в водном растворе 2-пропанола c получением соответствующих аминов и последующей окислительной полимеризации полученных аминов в водно-спиртовом растворе соляной кислоты в присутствии окисляющих агентов – персульфата аммония и бихромата калия были получены полианилин, политолуидин, полифенилендиамин. Структура полученных полимеров подтверждена с помощью метода ИК-спектроскопии. Исследование термических свойств полученных полимеров проводили методами термогравиметрического анализа и дифференциально-сканирующей калориметрии. Показано, что полиамины термостабильны в интервале температур 250-350 °С. Для изучения электроповодности полученных полиаминов был использован метод кондуктометрии. Показано, что при использовании бихромата калия полученный продукт обладал меньшей проводимостью по сравнению с полимером, полученным при использовании персульфата аммония. В дальнейшем, синтезированные полимеры были использованы для получения текстильных композиционных материалов на основе текстильных волокон. На первой стадии получения данных материалов хлопковое и льняное волокна были покрыты пленкой полиамида-6, как легирующей добавки, повышающей механическую прочность и фотоустойчивость. Для нанесения пленки были использованы растворы полиамида-6 в концентрированной муравьиной кислоте двух концентраций – 2,4 ммоль/л, 0,5 ммоль/л. На второй стадии на полиамидную пленку был нанесен слой обработанных полиаминов. Поверхность полученных композиционных материалов была исследована методом электронной микроскопии. Анализ волокон хлопка и льна, обработанных раствором полиамида-6 различной концентрацией показал, что при увеличении концентрации раствора полиамида возрастает упорядоченность волокон и целостность всего пучка.
- Open Access
Amino-Modified Silica as Effective Support of the Palladium Catalyst for 4-Nitroaniline Hydrogenation
The article describes the synthesis of aminoorgano-functionalized silica as a prospective material for catalysis application. The amino groups have electron donor properties which are valuable for the metal chemical state of palladium. Therefore, the presence of electron donor groups is important for increasing catalysts’ stability. The research is devoted to the investigation of silica amino-modified support influence on the activity and stability of palladium species in 4-nitroaniline hydrogenation process. A series of catalysts with different supports such as SiO2, SiO2-C3H6-NH2 (amino-functionalized silica), γ-Al2O3 and activated carbon were studied. The catalytic activity was studied in the hydrogenation of 4-nitroaniline to 1,4-phenylenediamine. The catalysts were characterized by scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy and chemisorption of hydrogen by the pulse technique. The 5 wt.% Pd/SiO2-C3H6-NH2 catalyst exhibited the highest catalytic activity for 4-nitroaniline hydrogenation with 100% conversion and 99% selectivity with respect to 1,4-phenylenediamine.
Open AccessAmino-Modified Silica as Effective Support of the Palladium Catalyst for 4-Nitroaniline Hydrogenation
The article describes the synthesis of aminoorgano-functionalized silica as a prospective material for catalysis application. The amino groups have electron donor properties which are valuable for the metal chemical state of palladium. Therefore, the presence of electron donor groups is important for increasing catalysts’ stability. The research is devoted to the investigation of silica amino-modified support influence on the activity and stability of palladium species in 4-nitroaniline hydrogenation process. A series of catalysts with different supports such as SiO2, SiO2-C3H6-NH2 (amino-functionalized silica), γ-Al2O3 and activated carbon were studied. The catalytic activity was studied in the hydrogenation of 4-nitroaniline to 1,4-phenylenediamine. The catalysts were characterized by scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy and chemisorption of hydrogen by the pulse technique. The 5 wt.% Pd/SiO2-C3H6-NH2 catalyst exhibited the highest catalytic activity for 4-nitroaniline hydrogenation with 100% conversion and 99% selectivity with respect to 1,4-phenylenediamine.
- Open Access
- 5 March 2020
- Published by MDPI AG in Preprints.org
Amino-modified Silica as Effective Support of the Palladium Catalyst of Hydrogenation
The article describes synthesis of aminoorgano-functionalized silica as a perspective material for catalysis application. The amino groups have electron donor properties valuable for metal chemical state of palladium. So presence of electron donor groups is important for increasing of catalysts stability. The research is devoted to investigation of silica amino-modified support influence on activity and stability of palladium species in 4-nitroaniline hydrogenation process. A series of catalysts with different supports such as SiO2, SiO2-C3H6-NH2 (amino-functionalized silica), γ-Al2O3 and activated carbon were studied. The catalytic activity was studied in the hydrogenation of 4-nitroaniline to 1,4-phenylenediamine. The catalysts were characterized by scanning electron microscopy, transmission electron microscopy, x-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy and pulse chemisorption of hydrogen. The 5 wt. % Pd/SiO2-C3H6-NH2 catalyst exhibited the highest catalytic activity for 4-nitroaniline hydrogenation with 100% conversion and 99% selectivity with respect to 1,4-phenylenediamine.
- 5 March 2020
- Published by MDPI AG in Preprints.org
Open AccessAmino-modified Silica as Effective Support of the Palladium Catalyst of Hydrogenation
The article describes synthesis of aminoorgano-functionalized silica as a perspective material for catalysis application. The amino groups have electron donor properties valuable for metal chemical state of palladium. So presence of electron donor groups is important for increasing of catalysts stability. The research is devoted to investigation of silica amino-modified support influence on activity and stability of palladium species in 4-nitroaniline hydrogenation process. A series of catalysts with different supports such as SiO2, SiO2-C3H6-NH2 (amino-functionalized silica), γ-Al2O3 and activated carbon were studied. The catalytic activity was studied in the hydrogenation of 4-nitroaniline to 1,4-phenylenediamine. The catalysts were characterized by scanning electron microscopy, transmission electron microscopy, x-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy and pulse chemisorption of hydrogen. The 5 wt. % Pd/SiO2-C3H6-NH2 catalyst exhibited the highest catalytic activity for 4-nitroaniline hydrogenation with 100% conversion and 99% selectivity with respect to 1,4-phenylenediamine.
- Open Access
- 1 January 2020
- Published by Ivanovo State University of Chemistry and Technology in ChemChemTech
- Vol. 63 (5) , 51-58
SYNTHEIS OF NI IMPREGNATED HYPERCROSSLINKED POLYSTERENE FOR CATALITIC HYDROGENATION OF D-GLUCOSE
Development of efficient catalysts is in focus of modern chemical technology for production of fine chemicals. D-sorbitol is widely used as sweetener, food additive and fuel compound is typically produced by D-glucose hydrogenation over Ni-Reney catalyst. However, this catalyst is characterized by not sufficient stability and selectivity to D-sorbitol formation. The described study is devoted to synthesis of nickel containing hypercrosslinked polystyrene for D-glucose hydrogenation process. Hypercrosslinked polystyrene is one of the representatives of crosslinked polymers with rigid matrix applicable for metal nanoparticles synthesis. However, hypercrosslinked polystyrene is characterized by high surface hydrophobicity that prevent impregnation of high amount of active metal over it surface. To overcome this disadvantage hypercrosslinked polystyrene was modified by hydrogen peroxide, chlorine and ammonia. A series of nickel based catalyst theoretically containing 25wt.% of nickel were synthesized. Modification of hypercrosslinked polystyrene results in appropriate increase in surface concentration of active metal. Synthesized Ni based catalysts were characterized by comparable Ni loading varying from 20.1 wt.% to 23.2 wt.%. Some increase in Ni loading can be subscribed to presence of surface-active groups in a case of modified hypercrosslinked polystyrene application. Mesopores surface area decrease from 126 m(2)/g to 69 m(2)/g in case of catalysts on modified hypercrosslinked polystyrene. Catalytic hydrogenation of D-glucose over synthesized Ni-containing catalysts showed considerable increase in turnover frequency (TOF) for all samples compare to commonly used Reney type nickel. Increase in TOF can be subscribed to appropriate increase of active metal surface concentration. Beside, some increase in catalyst selectivity to sorbitol took place. Considerable improvement of selectivity to sorbitol can be explained by increasing of desired D-glucose hydrogenation reaction rate, while reaction rate of D-glucose isomerization process to D-fructose remain the same. The achieved TOF for most active catalyst was found to be 0.27 s(-1) and catalysts selectivity to D-sorbitol 98%.
- 1 January 2020
- Published by Ivanovo State University of Chemistry and Technology in ChemChemTech
- Vol. 63 (5) , 51-58
Open AccessSYNTHEIS OF NI IMPREGNATED HYPERCROSSLINKED POLYSTERENE FOR CATALITIC HYDROGENATION OF D-GLUCOSE
Development of efficient catalysts is in focus of modern chemical technology for production of fine chemicals. D-sorbitol is widely used as sweetener, food additive and fuel compound is typically produced by D-glucose hydrogenation over Ni-Reney catalyst. However, this catalyst is characterized by not sufficient stability and selectivity to D-sorbitol formation. The described study is devoted to synthesis of nickel containing hypercrosslinked polystyrene for D-glucose hydrogenation process. Hypercrosslinked polystyrene is one of the representatives of crosslinked polymers with rigid matrix applicable for metal nanoparticles synthesis. However, hypercrosslinked polystyrene is characterized by high surface hydrophobicity that prevent impregnation of high amount of active metal over it surface. To overcome this disadvantage hypercrosslinked polystyrene was modified by hydrogen peroxide, chlorine and ammonia. A series of nickel based catalyst theoretically containing 25wt.% of nickel were synthesized. Modification of hypercrosslinked polystyrene results in appropriate increase in surface concentration of active metal. Synthesized Ni based catalysts were characterized by comparable Ni loading varying from 20.1 wt.% to 23.2 wt.%. Some increase in Ni loading can be subscribed to presence of surface-active groups in a case of modified hypercrosslinked polystyrene application. Mesopores surface area decrease from 126 m(2)/g to 69 m(2)/g in case of catalysts on modified hypercrosslinked polystyrene. Catalytic hydrogenation of D-glucose over synthesized Ni-containing catalysts showed considerable increase in turnover frequency (TOF) for all samples compare to commonly used Reney type nickel. Increase in TOF can be subscribed to appropriate increase of active metal surface concentration. Beside, some increase in catalyst selectivity to sorbitol took place. Considerable improvement of selectivity to sorbitol can be explained by increasing of desired D-glucose hydrogenation reaction rate, while reaction rate of D-glucose isomerization process to D-fructose remain the same. The achieved TOF for most active catalyst was found to be 0.27 s(-1) and catalysts selectivity to D-sorbitol 98%.
- 10 December 2019
- Published by Ivanovo State University of Chemistry and Technology in ChemChemTech
- Vol. 63 (1) , 86-91
FEATURES OF HYDROGENIZATION OF 2-CHLORO-4-NITROANILINE ON SUPPORTED PALLADIUM AND PLATINUM CATALYSTS IN 2-PROPANOL AND ETHYL ACETATE
The article is devoted to studying the solvent and catalyst nature influence on the 2-chloro-4-nitroaniline hydrogenation kinetic regularities on supported palladium and platinum catalysts in an aqueous solution of azeotropic composition and ethyl acetate. It is known that the halogen-substituted nitrobenzenes reduction may be accompanied by a secondary stage of hydrogenolysis. In this regard, the development of objective ideas about the selective control methods of the studied reaction the transformations staging is an extremely important task. The paper discusses the influence of the solvent and catalyst nature on the chlorine substituted amine yield. It should be noted that the form of kinetic curves for hydrogen in hydrogenation in ethyl acetate and 2-propanol indicates a significant influence of the solvent nature and a complex relationship between the catalyst structure and the solvent. It was established that a side-effect process that reduces the selectivity of the reaction with respect to 2-chloro-1,4-phenylenediamine is its dehalogenation. In the case of using ethyl acetate as a solvent, the absence of the 2-chloro-1,4-phenylenediamine dehalogenate product in the hydrogenation during the process, on both palladium and platinum catalysts, is noted. It is established that the hydrogen absorption rate in ethyl acetate on a palladium catalyst is eight times higher than on platinum. This effect may be associated with a smaller contribution of diffusion braking on a palladium catalyst. It is obvious that such effects may be due to the structure of the carriers. Probably, platinum, when applied to a substrate, is distributed on the inner surface of the carrier deep pores, while the distribution of the palladium phase is more likely to correspond to the crust distribution. This assumption also explains the fact of the palladium catalyst higher activity, which is accompanied by dehalogenation high degrees in 2-propanol.
- 10 December 2019
- Published by Ivanovo State University of Chemistry and Technology in ChemChemTech
- Vol. 63 (1) , 86-91
FEATURES OF HYDROGENIZATION OF 2-CHLORO-4-NITROANILINE ON SUPPORTED PALLADIUM AND PLATINUM CATALYSTS IN 2-PROPANOL AND ETHYL ACETATE
The article is devoted to studying the solvent and catalyst nature influence on the 2-chloro-4-nitroaniline hydrogenation kinetic regularities on supported palladium and platinum catalysts in an aqueous solution of azeotropic composition and ethyl acetate. It is known that the halogen-substituted nitrobenzenes reduction may be accompanied by a secondary stage of hydrogenolysis. In this regard, the development of objective ideas about the selective control methods of the studied reaction the transformations staging is an extremely important task. The paper discusses the influence of the solvent and catalyst nature on the chlorine substituted amine yield. It should be noted that the form of kinetic curves for hydrogen in hydrogenation in ethyl acetate and 2-propanol indicates a significant influence of the solvent nature and a complex relationship between the catalyst structure and the solvent. It was established that a side-effect process that reduces the selectivity of the reaction with respect to 2-chloro-1,4-phenylenediamine is its dehalogenation. In the case of using ethyl acetate as a solvent, the absence of the 2-chloro-1,4-phenylenediamine dehalogenate product in the hydrogenation during the process, on both palladium and platinum catalysts, is noted. It is established that the hydrogen absorption rate in ethyl acetate on a palladium catalyst is eight times higher than on platinum. This effect may be associated with a smaller contribution of diffusion braking on a palladium catalyst. It is obvious that such effects may be due to the structure of the carriers. Probably, platinum, when applied to a substrate, is distributed on the inner surface of the carrier deep pores, while the distribution of the palladium phase is more likely to correspond to the crust distribution. This assumption also explains the fact of the palladium catalyst higher activity, which is accompanied by dehalogenation high degrees in 2-propanol.