Gilberto J. Colina Andrade
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Gilberto J. Colina Andrade has a total of 30 co-authors. Here are the top co-authors by number of shared publications:
- Ruly Terán Hilares
Laboratorio de Bioprocesos, Facultad de Ciencias Farmacéuticas, Bioquímicas y Biotecnológicas, Universidad Católica de Santa María—UCSM, Urb. San José s/n—Umacollo, Arequipa 04000, Peru
5 shared publications - Kevin Tejada Meza
Laboratorio de Materiales, Universidad Católica de Santa María (UCSM), Urb. San José, San José S/n, Yanahuara, Arequipa 04000, Peru
4 shared publications - David Alfredo Pacheco Tanaka
Inorganic Membranes and Membrane Reactors, Sustainable Process Engineering, Department of Chemical Engineering and Chemistry, Eindhoven University of Technology, De Rondom 70, 5612 AP Eindhoven, The Netherlands
3 shared publications - Sedolfo Jose Carrasquero Ferrer
Universidad Tecnológica Empresarial de Guayaquil
3 shared publications - Jaime Dante Cárdenas García
Laboratorio de Tecnología de Membranas, Universidad Católica de Santa María—UCSM, Urb. San José, San José S/N, Yanahuara, Arequipa 04000, Peru
2 shared publications - Alberto Jiménez Orihuela
Laboratorio de Materiales, Universidad Católica de Santa María (UCSM), Urb. San José, San José S/n, Yanahuara, Arequipa 04000, Peru
1 shared publication
Latest Publications
- 21 July 2026
- Published by Springer Nature in Water, Air, & Soil Pollution
- Vol. 237 (19) , 1089
Tara Seed (Caesalpinia Spinosa) as a Potential Coagulant for Turbidity Removal in Drinking Water
- 21 July 2026
- Published by Springer Nature in Water, Air, & Soil Pollution
- Vol. 237 (19) , 1089
Tara Seed (Caesalpinia Spinosa) as a Potential Coagulant for Turbidity Removal in Drinking Water
- Open Access
Monitoring of Nutrient Removal in Swine Effluents Using Sequential Reactors with Oxygen Control
Swine effluents require effective treatment due to their high pollutant load, particularly nitrogen and phosphorus, which can cause eutrophication of water bodies. This study focused on monitoring nutrient removal in a sequential biological reactor through online measurements of parameters such as dissolved oxygen (DO), pH, oxidation-reduction potential (ORP), and total alkalinity during the treatment of effluents from a pig slaughterhouse. A laboratory-scale reactor was used, operated with timer switches in an anaerobic–aerobic–anoxic sequence, a sludge retention time (SRT) of 25 days, and an operational cycle time of 16 h. The reactor demonstrated notable efficiency in contaminant removal, with an average organic matter removal of 87.1% measured as chemical oxygen demand (COD) and 95.5% as biochemical oxygen demand (BOD). Regarding nitrogen and phosphorus removal, a 69.4% reduction in total nitrogen (TN) and a 53.2% reduction in total phosphorus (TP) were observed. The pH, ORP, and DO profiles showed a clear correlation with the nutrient removal processes, allowing optimization of the phase durations in the reactor to enhance treatment efficiency.
Open AccessMonitoring of Nutrient Removal in Swine Effluents Using Sequential Reactors with Oxygen Control
Swine effluents require effective treatment due to their high pollutant load, particularly nitrogen and phosphorus, which can cause eutrophication of water bodies. This study focused on monitoring nutrient removal in a sequential biological reactor through online measurements of parameters such as dissolved oxygen (DO), pH, oxidation-reduction potential (ORP), and total alkalinity during the treatment of effluents from a pig slaughterhouse. A laboratory-scale reactor was used, operated with timer switches in an anaerobic–aerobic–anoxic sequence, a sludge retention time (SRT) of 25 days, and an operational cycle time of 16 h. The reactor demonstrated notable efficiency in contaminant removal, with an average organic matter removal of 87.1% measured as chemical oxygen demand (COD) and 95.5% as biochemical oxygen demand (BOD). Regarding nitrogen and phosphorus removal, a 69.4% reduction in total nitrogen (TN) and a 53.2% reduction in total phosphorus (TP) were observed. The pH, ORP, and DO profiles showed a clear correlation with the nutrient removal processes, allowing optimization of the phase durations in the reactor to enhance treatment efficiency.
- Open Access
- 1 November 2024
- Published by RGSA- Revista de Gestao Social e Ambiental in Revista de Gestão Social e Ambiental
- Vol. 18 (11) , e09782
Acclimatation of Microbial Biomass to Effluents From a Swine Slaughterhouse in Batch Reactors
Objective: To evaluate the acclimatization of microbial biomass in sequential reactors to optimize the treatment of wastewater from pig slaughterhouses. Theoretical framework: The meat industry generates highly contaminated wastewater. Biological treatments, such as aerobic and anaerobic systems, are more efficient and sustainable than physicochemical ones. Materials and methods: Industrial effluents were collected in a pig slaughterhouse and then characterized. The microbial biomass was collected from the same slaughterhouse and was subjected to an acclimatization process in a sequential batch reactor. Results and discussion: The results showed that the wastewater from the pig slaughterhouse had high levels of BOD, COD and suspended solids, exceeding the limits established by local regulations. During the acclimatization process, the microbial biomass demonstrated a gradual improvement in its COD removal capacity, reaching efficiencies greater than 70%. The positive correlation observed between volumetric organic load and organic matter removal efficiency indicates that acclimated biomass has a greater capacity to treat effluents with high levels of organic load. Research implications: Biomass acclimatization is essential to improve the efficiency of biological treatment in slaughterhouse effluents, reducing its environmental impact and the need for costly treatments. Value/originality: This study proposes a more sustainable and efficient solution for the treatment of slaughterhouse wastewater, highlighting the importance of biomass acclimatization.
- 1 November 2024
- Published by RGSA- Revista de Gestao Social e Ambiental in Revista de Gestão Social e Ambiental
- Vol. 18 (11) , e09782
Open AccessAcclimatation of Microbial Biomass to Effluents From a Swine Slaughterhouse in Batch Reactors
Objective: To evaluate the acclimatization of microbial biomass in sequential reactors to optimize the treatment of wastewater from pig slaughterhouses. Theoretical framework: The meat industry generates highly contaminated wastewater. Biological treatments, such as aerobic and anaerobic systems, are more efficient and sustainable than physicochemical ones. Materials and methods: Industrial effluents were collected in a pig slaughterhouse and then characterized. The microbial biomass was collected from the same slaughterhouse and was subjected to an acclimatization process in a sequential batch reactor. Results and discussion: The results showed that the wastewater from the pig slaughterhouse had high levels of BOD, COD and suspended solids, exceeding the limits established by local regulations. During the acclimatization process, the microbial biomass demonstrated a gradual improvement in its COD removal capacity, reaching efficiencies greater than 70%. The positive correlation observed between volumetric organic load and organic matter removal efficiency indicates that acclimated biomass has a greater capacity to treat effluents with high levels of organic load. Research implications: Biomass acclimatization is essential to improve the efficiency of biological treatment in slaughterhouse effluents, reducing its environmental impact and the need for costly treatments. Value/originality: This study proposes a more sustainable and efficient solution for the treatment of slaughterhouse wastewater, highlighting the importance of biomass acclimatization.
- Open Access
Saponin Molecules from Quinoa Residues: Exploring Their Surfactant, Emulsifying, and Detergent Properties
The indiscriminate use of synthetic surfactants, despite their desirable properties, poses significant environmental risks to ecosystems. This study explores saponins extracted from quinoa (Chenopodium quinoa) residues as a sustainable alternative. Saponin extract (SE) with 42% purity, obtained through hydrodynamic cavitation and membrane technology, was analyzed to determine its techno-functional properties. The critical micelle concentration (CMC) was 1.2 g/L, reducing the surface tension (ST) from 72.0 mN/m to 50.0 mN/m. The effects of temperature (30–90 °C), pH (2–12), and salinity (10,000–150,000 ppm NaCl) on ST and the emulsification index (EI) were assessed using a Box–Behnken design. Optimized conditions yielded an ST of 49.02 mN/m and an EI of 63%. Given these characteristics, SE was evaluated as a detergent across diverse swatches. This study showcases the attributes of quinoa-derived saponins, highlighting their potential for eco-friendly detergent applications.
Open AccessSaponin Molecules from Quinoa Residues: Exploring Their Surfactant, Emulsifying, and Detergent Properties
The indiscriminate use of synthetic surfactants, despite their desirable properties, poses significant environmental risks to ecosystems. This study explores saponins extracted from quinoa (Chenopodium quinoa) residues as a sustainable alternative. Saponin extract (SE) with 42% purity, obtained through hydrodynamic cavitation and membrane technology, was analyzed to determine its techno-functional properties. The critical micelle concentration (CMC) was 1.2 g/L, reducing the surface tension (ST) from 72.0 mN/m to 50.0 mN/m. The effects of temperature (30–90 °C), pH (2–12), and salinity (10,000–150,000 ppm NaCl) on ST and the emulsification index (EI) were assessed using a Box–Behnken design. Optimized conditions yielded an ST of 49.02 mN/m and an EI of 63%. Given these characteristics, SE was evaluated as a detergent across diverse swatches. This study showcases the attributes of quinoa-derived saponins, highlighting their potential for eco-friendly detergent applications.
- Open Access
- 10 September 2024
- Published by MDPI AG in Sustainability
- Vol. 16 (18) , 7876
Environmental Sustainability of the Removal of Alpaca Fiber Dye Using a Thermally Modified Sludge from a Drinking Water Treatment Facility
In this work, the removal of dye using thermally modified sludge from a drinking water treatment facility (DWTS) was evaluated. This study gives value to the waste from the coagulation flocculation process (waste sludge) in order to remove an emerging organic agent (Bordeaux B). The sustainability of the process leads to a circular economy, which represents an important environmental contribution. The physicochemical characterization of the DWTS was carried out by standard methods. DRX and FTIR spectroscopy, SEM, and superficial specific area SBET N2 at 77 K were used. Thermal activation processes were carried out (200–600 °C) to obtain the best activated thermal conditions for dye removal (T: 500 °C). Muscovite and other minerals were found in the DWTS. Experimental conditions (batch mode) were determined: contact time (CT), pH, adsorbent dose (AD), and dye initial concentration (Co). SBET = 54.77 and 67.90 m2/g by DWTS and TA-500. The best removal efficiency was achieved at 500 °C (R = 85.57 ± 0.76 %, q max = 37.45 ± 0.14 mg/g), which, compared to other unconventional adsorbents, is more reliable and competitive. The adsorption process was adjusted to the Langmuir mathematics model, following pseudo-second-order kinetics (R2 = 0.99).
- 10 September 2024
- Published by MDPI AG in Sustainability
- Vol. 16 (18) , 7876
Open AccessEnvironmental Sustainability of the Removal of Alpaca Fiber Dye Using a Thermally Modified Sludge from a Drinking Water Treatment Facility
In this work, the removal of dye using thermally modified sludge from a drinking water treatment facility (DWTS) was evaluated. This study gives value to the waste from the coagulation flocculation process (waste sludge) in order to remove an emerging organic agent (Bordeaux B). The sustainability of the process leads to a circular economy, which represents an important environmental contribution. The physicochemical characterization of the DWTS was carried out by standard methods. DRX and FTIR spectroscopy, SEM, and superficial specific area SBET N2 at 77 K were used. Thermal activation processes were carried out (200–600 °C) to obtain the best activated thermal conditions for dye removal (T: 500 °C). Muscovite and other minerals were found in the DWTS. Experimental conditions (batch mode) were determined: contact time (CT), pH, adsorbent dose (AD), and dye initial concentration (Co). SBET = 54.77 and 67.90 m2/g by DWTS and TA-500. The best removal efficiency was achieved at 500 °C (R = 85.57 ± 0.76 %, q max = 37.45 ± 0.14 mg/g), which, compared to other unconventional adsorbents, is more reliable and competitive. The adsorption process was adjusted to the Langmuir mathematics model, following pseudo-second-order kinetics (R2 = 0.99).
- Open Access
Enhanced Removal of Bordeaux B and Red G Dyes Used in Alpaca Wool Dying from Water Using Iron-Modified Activated Carbon
The aim of this research was to explore the removal of Red G and Bordeaux B dyes from water using a packed bed column with conventional carbon (C-conv) and iron-modified activated carbon ). The bands increased in , corresponding to groups already existing in C-conv, such as C = C and C-C, and the appearance of new groups, such as C-O, C-Cl, Fe-Cl and Fe-O. The total ash content (CT) was CT = (10.53 ± 0.12 and 8.98 ± 0.21)% for C-conv and , respectively. A molecular structure in the shape of a cross was noticed in Bordeaux B, which was less complex and smaller than the one in Red G. For fixed-bed columns, the carbon fraction was (0.43 and 0.85) mm. The pH of the adsorbents was 8.55 for C-conv and 4.14 for . Breakthrough curves were obtained and the Thomas model (TM) and Yoon–Nelson model (YNM) were applied. The sorption capacity of Bordeaux B on C-conv and was : (237.88 and 216.21) mg/g, respectively, but the one of Red G was : (338.46 and 329.42) mg/g. The dye removal (RT) was over 55%.Open AccessEnhanced Removal of Bordeaux B and Red G Dyes Used in Alpaca Wool Dying from Water Using Iron-Modified Activated Carbon
The aim of this research was to explore the removal of Red G and Bordeaux B dyes from water using a packed bed column with conventional carbon (C-conv) and iron-modified activated carbon ). The bands increased in , corresponding to groups already existing in C-conv, such as C = C and C-C, and the appearance of new groups, such as C-O, C-Cl, Fe-Cl and Fe-O. The total ash content (CT) was CT = (10.53 ± 0.12 and 8.98 ± 0.21)% for C-conv and , respectively. A molecular structure in the shape of a cross was noticed in Bordeaux B, which was less complex and smaller than the one in Red G. For fixed-bed columns, the carbon fraction was (0.43 and 0.85) mm. The pH of the adsorbents was 8.55 for C-conv and 4.14 for . Breakthrough curves were obtained and the Thomas model (TM) and Yoon–Nelson model (YNM) were applied. The sorption capacity of Bordeaux B on C-conv and was : (237.88 and 216.21) mg/g, respectively, but the one of Red G was : (338.46 and 329.42) mg/g. The dye removal (RT) was over 55%. - Open Access
Continuous Cultivation of Microalgae in Cattle Slaughterhouse Wastewater Treated with Hydrodynamic Cavitation
Cattle slaughtering produce large amounts of wastewater containing high concentrations of organic matter and nutrients and requires significant treatment before disposal or reutilization. However, the nutrients contained can be valued as a medium for microalgal biomass generation. In this work, hydrodynamic cavitation (HC) followed by membrane filtration or biological (microalgae cultivation) treatment in continuous mode were performed. From cattle slaughterhouse wastewater (CSW), by the effect of HC treatment with air injection in batch mode, more than 20% of the chemical oxygen demand (COD) was removed. In a continuous HC process, the COD content in output was 324 mg O2/L, which is 68% lower than the supplied CSW. After that, 76% of residual COD was removed by filtration through a tubular alumina membrane (600 nm). Finally, 85% of residual COD after HC treatment in 24 h in a batch mode was removed by microalgae. On the other hand, the COD concentration in the output was around 59 mg O2/L in continuous mode, which represents 85–93% COD removal. The process involving HC and microalgae growing looks promising since in addition to water treatment, the microalgae produced could be valued in a biorefinery concept.
Open AccessContinuous Cultivation of Microalgae in Cattle Slaughterhouse Wastewater Treated with Hydrodynamic Cavitation
Cattle slaughtering produce large amounts of wastewater containing high concentrations of organic matter and nutrients and requires significant treatment before disposal or reutilization. However, the nutrients contained can be valued as a medium for microalgal biomass generation. In this work, hydrodynamic cavitation (HC) followed by membrane filtration or biological (microalgae cultivation) treatment in continuous mode were performed. From cattle slaughterhouse wastewater (CSW), by the effect of HC treatment with air injection in batch mode, more than 20% of the chemical oxygen demand (COD) was removed. In a continuous HC process, the COD content in output was 324 mg O2/L, which is 68% lower than the supplied CSW. After that, 76% of residual COD was removed by filtration through a tubular alumina membrane (600 nm). Finally, 85% of residual COD after HC treatment in 24 h in a batch mode was removed by microalgae. On the other hand, the COD concentration in the output was around 59 mg O2/L in continuous mode, which represents 85–93% COD removal. The process involving HC and microalgae growing looks promising since in addition to water treatment, the microalgae produced could be valued in a biorefinery concept.
- 1 April 2022
- Published by Wiley in Water Environment Research
- Vol. 94 (4) , e10708
Alternative methods for cleaning membranes in water and wastewater treatment
Membrane fouling is caused by foulant deposition or adsorption through physical or chemical interactions on the membrane surface, causing the reduction of flux through the membrane. The main drawbacks of chemical agents used for cleaning are cost, damage caused on the membrane, and waste stream making the process unattractive. Alternative, methods such as ultrasound, enzymatic process, and osmotic backwashing were explored for membrane cleaning. Among all mentioned methods, micronanobubbles have been reported as a promising and emergent method for membrane surface cleaning; unfortunately, the information is limited, but preliminary studies have shown it as an efficient, cheap, and environmentally friendly technique. Other methods like electrically and vibratory‐enhanced membrane cleaning also could be interesting but currently are unexplored and information is limited.Practitioner Points: Chemical cleaning is an efficient option; however, from an environmental point of view, it is not attractive, and high concentrations could cause damage to the membrane. Micronanobubbles are an emergent and suitable technology for membrane and surface cleaning. Membrane modification and functionalization avoid membrane fast fouling, and the cleaning process is easier, but the manufacture cost could be expensive.
- 1 April 2022
- Published by Wiley in Water Environment Research
- Vol. 94 (4) , e10708
Alternative methods for cleaning membranes in water and wastewater treatment
Membrane fouling is caused by foulant deposition or adsorption through physical or chemical interactions on the membrane surface, causing the reduction of flux through the membrane. The main drawbacks of chemical agents used for cleaning are cost, damage caused on the membrane, and waste stream making the process unattractive. Alternative, methods such as ultrasound, enzymatic process, and osmotic backwashing were explored for membrane cleaning. Among all mentioned methods, micronanobubbles have been reported as a promising and emergent method for membrane surface cleaning; unfortunately, the information is limited, but preliminary studies have shown it as an efficient, cheap, and environmentally friendly technique. Other methods like electrically and vibratory‐enhanced membrane cleaning also could be interesting but currently are unexplored and information is limited.Practitioner Points: Chemical cleaning is an efficient option; however, from an environmental point of view, it is not attractive, and high concentrations could cause damage to the membrane. Micronanobubbles are an emergent and suitable technology for membrane and surface cleaning. Membrane modification and functionalization avoid membrane fast fouling, and the cleaning process is easier, but the manufacture cost could be expensive.
- Open Access
- 16 December 2019
- Published by Universidad de los Llanos in Orinoquia
- Vol. 23 (2)
Eficiencia del quitosano como coagulante en el postratamiento de efluentes de una planta de sacrificio de cerdos
Los efluentes provenientes del sacrificio de cerdos son una fuente de contaminación debido a las altas concentraciones de materia orgánica, nitrógeno, fósforo, grasas, sólidos totales y coliformes fecales. En esta investigación se evaluó la efectividad del quitosano como coagulante en el postratamiento de efluentes porcícolas provenientes de un reactor discontinuo secuencial, con el fin de remover las fracciones no biodegradables remanentes del proceso biológico. El tratamiento terciario consistió en la coagulación, floculación y sedimentación. Se caracterizó el efluente tratado biológicamente mediante los siguientes parámetros: pH, DQO, turbidez, color, sólidos totales (ST), nitrógeno total Kjeldahl (NTK), nitrito, nitrato, fosforo total (PT) y alcalinidad total (AT). El tratamiento fisicoquímico se llevó a cabo mediante el uso de la prueba de Jarra a través de corridas exploratorias con dosis entre 50 y 800 mg/L de quitosano disuelto en ácido acético. Se comparó la efectividad del quitosano (700 mg/l) con sulfato de aluminio (430mg/l) y poliacrilamida (90 mg/l), los cuales son utilizados como coagulantes de uso convencional en el tratamiento de aguas residuales. El experimento se condujo mediante un diseño completamente al azar con un total de tres tratamientos (quitosano, sulfato de aluminio y poliacrilamida) y tres repeticiones cada uno. La dosis de quitosano (700 mg/l) permitió obtener porcentajes de reducción de turbidez de 83.1%, color de 64.7%, DQO de 84.6%, y 78.2% de NT para valores iniciales de 15.6 NTU, 26 UC Pt-Co, 865 mg DQO/L y 89 mg NT/L. Se encontraron diferencias significativas (P≤0.05) entre la dosis quitosano (700 mg/l) y los coagulantes convencionales (430 mg/l de sulfato de aluminio y 90 mg/l de poliacrilamida) en la reducción de NT, siendo el tratamiento con quitosano el coagulante con las mayores eficiencias de reducción. El tratamiento con quitosano con una dosis de 700 mg/l representó una opción viable para el tratamiento terciario de los efluentes proveniente del proceso de sacrificio de cerdos tratados biológicamente.
- 16 December 2019
- Published by Universidad de los Llanos in Orinoquia
- Vol. 23 (2)
Open AccessEficiencia del quitosano como coagulante en el postratamiento de efluentes de una planta de sacrificio de cerdos
Los efluentes provenientes del sacrificio de cerdos son una fuente de contaminación debido a las altas concentraciones de materia orgánica, nitrógeno, fósforo, grasas, sólidos totales y coliformes fecales. En esta investigación se evaluó la efectividad del quitosano como coagulante en el postratamiento de efluentes porcícolas provenientes de un reactor discontinuo secuencial, con el fin de remover las fracciones no biodegradables remanentes del proceso biológico. El tratamiento terciario consistió en la coagulación, floculación y sedimentación. Se caracterizó el efluente tratado biológicamente mediante los siguientes parámetros: pH, DQO, turbidez, color, sólidos totales (ST), nitrógeno total Kjeldahl (NTK), nitrito, nitrato, fosforo total (PT) y alcalinidad total (AT). El tratamiento fisicoquímico se llevó a cabo mediante el uso de la prueba de Jarra a través de corridas exploratorias con dosis entre 50 y 800 mg/L de quitosano disuelto en ácido acético. Se comparó la efectividad del quitosano (700 mg/l) con sulfato de aluminio (430mg/l) y poliacrilamida (90 mg/l), los cuales son utilizados como coagulantes de uso convencional en el tratamiento de aguas residuales. El experimento se condujo mediante un diseño completamente al azar con un total de tres tratamientos (quitosano, sulfato de aluminio y poliacrilamida) y tres repeticiones cada uno. La dosis de quitosano (700 mg/l) permitió obtener porcentajes de reducción de turbidez de 83.1%, color de 64.7%, DQO de 84.6%, y 78.2% de NT para valores iniciales de 15.6 NTU, 26 UC Pt-Co, 865 mg DQO/L y 89 mg NT/L. Se encontraron diferencias significativas (P≤0.05) entre la dosis quitosano (700 mg/l) y los coagulantes convencionales (430 mg/l de sulfato de aluminio y 90 mg/l de poliacrilamida) en la reducción de NT, siendo el tratamiento con quitosano el coagulante con las mayores eficiencias de reducción. El tratamiento con quitosano con una dosis de 700 mg/l representó una opción viable para el tratamiento terciario de los efluentes proveniente del proceso de sacrificio de cerdos tratados biológicamente.