NBNathaniel R. Bristow

Nathaniel R. Bristow

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Nathaniel R. Bristow has a total of 35 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Modulation induced by very-large-scale motions on the inclination angle of wall-attached eddies: an atmospheric surface layer experiment

    by Matteo Puccioni, Giacomo Valerio Iungo, Michele Guala, Jiarong Hong, Nathaniel R. Bristow, Coleman Moss

    The forward leaning inclination angle, $\gamma$ , of coherent turbulent structures is a well-known feature of wall-bounded turbulent flows. Although invariant across friction Reynolds numbers within the range $\textit{Re}_\tau =10^3{-}10^6$ , $\gamma$ can vary significantly across turbulent scales within a high-Reynolds-number flow. Very-large-scale motions (VLSMs) are known to induce significant changes in the instantaneous shear profile, which is a conditioning event that could trigger variability in the inclination angle of smaller coherent turbulent structures. Although this aspect has been extensively studied via numerical and laboratory experiments, few studies have explored this feature for a very-high-Reynolds-number atmospheric flow. In this work, the inclination angle of turbulent structures within the atmospheric surface layer at a very high Reynolds number ( $\textit{Re}_\tau =7.9\times 10^5$ ) is investigated by deploying a scanning Doppler light detection and ranging and a super large particle image velocimetry (SLPIV) apparatus. The inclination angle of wall-attached eddies is inferred either from the two-point correlation of streamwise velocity ( $\gamma =41.1^\circ$ ) or with a scale-dependent approach through the spectral linear stochastic estimator (SLSE). The SLSE (and, thus, the scale-dependent inclination angle) is conditionally evaluated based on the high- and low-momentum events induced by VLSMs, both in the streamwise ( $u'_{\textit{VLSM}}$ ) and in the vertical ( $w'_{\textit{VLSM}}$ ) velocity components. As a result, lower inclination angles ( $\gamma =30^\circ {-}50^\circ$ ) are found for $u'_{\textit{VLSM}}\gt 0$ ( $w'_{\textit{VLSM}}\lt 0$ ), while higher values ( $50^\circ {-}85^\circ$ ) are ascribed to $u'_{\textit{VLSM}}\lt 0$ ( $w'_{\textit{VLSM}}\gt 0$ ). This result emphasises the primary role that VLSMs play in shaping the wall-attached eddy geometry, which, in turn, is crucial to determine the Reynolds stress balance within the wall-attached eddy range.

  • Open Access

    Quantifying the Form‐Flow‐Saltation Dynamics of Aeolian Sand Ripples

    by Joanna M. Nield, Matthew C. Baddock, Giles F. S. Wiggs, Jim Best, Kenneth T. Christensen, Pauline Delorme, Andrew Valdez, Nathaniel R. Bristow, Martin H. T. Hipondoka, Daniel P. Goss, et al.

    Ripples are the most fundamental and ubiquitous aeolian bedforms formed on sandy surfaces, but their small size and fast response times make them inherently difficult to measure. However, these attributes also make ripples excellent flow indicators, and they have been used extensively in planetary locations for this purpose. Here, we use terrestrial laser scanning to measure ripple morphometry and celerity coincidently, as well as saltation height above rippled surfaces. We find that although ripple height and wavelength respond linearly to increased shear velocity, under strong winds ripple celerity exhibits a non‐linear increase. This relationship at high wind speeds is also reflected in the response of aerodynamic roughness and saltation dynamics, with a greater maximum saltation height present over ripple lee slopes. Importantly, when using ripple patterns as indicators of flow conditions, celerity or height should be used in preference to wavelength as their dynamics respond faster to changing wind speed. In planetary and stratigraphic settings where measuring celerity is not possible, wavelength should be considered as indicative of consistent wind conditions rather than the full range of sand transporting wind speeds.


  • Atmospheric Aerosol Diagnostics With UAV-Based Holographic Imaging and Computer Vision

    by Nathaniel R. Bristow, Nikolas Pardoe, Jiarong Hong

    Emissions of particulate matter into the atmosphere are essential to characterize, in terms of properties such as particle size, morphology, and composition, to better understand impacts on public health and the climate. However, there is no currently available technology capable of measuring individual particles with such high detail over the extensive domains associated with events such as wildfires or volcanic eruptions. To solve this problem, we present an autonomous measurement system involving an unmanned aerial vehicle (UAV) coupled with a digital inline holographic microscope for in situ particle diagnostics. The flight control uses computer vision to localize and then trace the movements of particle-laden flows while sampling particles to determine their properties as they are transported away from their source. We demonstrate this system applied to measuring particulate matter in smoke plumes and discuss broader implications for this type of system in similar applications.


  • Open Access

    Field Evidence for the Initiation of Isolated Aeolian Sand Patches

    by P. Delorme, J. M. Nield, G. F. S. Wiggs, M. C. Baddock, N. R. Bristow, J. L. Best, K. T. Christensen, P. Claudin

    Sand patches are one of the precursors to early stage protodunes and occur widely in both desert and coastal aeolian environments. Here we show field evidence of a mechanism to explain the initiation of sand patches on non‐erodible surfaces, such as desert gravels and moist beaches. Changes in sand transport dynamics, directly associated with the height of the saltation layer and variable transport law, observed at the boundary between non‐erodible and erodible surfaces lead to sand deposition on the erodible surface. This explains how sand patches can form on surfaces with limited sand availability where linear stability of dune theory does not apply. This new mechanism is supported by field observations that evidence both the change in transport rate over different surfaces and in situ patch formation that leads to modification of transport dynamics at the surface boundary.


  • Topographic perturbation of turbulent boundary layers by low‐angle, early‐stage aeolian dunes

    by Nathaniel R. Bristow, J. L. Best, Giles F. S. Wiggs, Joanna M. Nield, Matthew C. Baddock, Pauline Delorme, Kenneth T. Christensen

    Decimeter‐scale early‐stage aeolian bedforms represent topographic features that differ notably from their mature dune counterparts, with nascent forms exhibiting more gently sloping lee sides and a reverse asymmetry in their flow‐parallel bed profile compared to mature dunes. Flow associated with the development of these “protodunes,” wherein the crest gradually shifts downstream towards its mature state, was investigated by studying the perturbation of the turbulent boundary layer over a succession of representative bedforms. Rigid, three‐dimensional models were studied in a refractive‐index‐matched experimental flume that enabled near‐surface quantification of mean velocities and Reynolds stresses using particle‐image velocimetry in wall‐normal and wall‐parallel measurement planes. Data indicate strong, topographically induced flow perturbations over the protodunes, to a similar relative degree to that found over mature dunes, despite their low‐angled slopes. The shape of the crest is found to be an important factor in the development of flow perturbations, and only in the case with the flattest crest was maximal speed‐up of flow, and reduction in turbulent stresses, found to occur upstream of the crest. Investigation of the log‐linearity of the boundary layer profile over the stoss sides showed that, although the profile is strongly perturbed, a log‐linear region exists, but is shifted vertically. A streamwise trend in friction velocity is thus present, showing a behavior similar to the trends in mean velocity. Analysis of the growth of the internal boundary layer on the dune stoss sides, beginning at the toe region, reveals a similar development for all dune shapes, despite clear differences in mean velocity and turbulent stress perturbations in their toe regions. The data presented herein provide the first documentation of flow over morphologies broadly characteristic of subtle, low‐angle, aeolian protodunes, and indicate key areas where further study is required to yield a more complete quantitative understanding of flow–form–transport couplings that govern their morphodynamics.


  • Open Access

    Cross-plane stereo-PIV measurements in a refractive-index-matched environment of flow associated with barchan dunes immersed in a turbulent boundary layer

    by Nathaniel Bristow, Gianluca Blois, James Best, Kenneth Christensen

    Barchan dunes are crescent-shaped bedforms that form in aeolian (i.e., wind-driven) environments (including both Earth and other planets, such as Mars) as well as subaqueous environments. Under the forcing of the aloft turbulent boundary layer, they migrate downstream at a rate inversely proportional to their size, which results in complex interactions between neighboring dunes of disparate scales. In particular, it has been observed that dunes will interact at a distance, causing changes in morphology without contacting each other, which is thought to be driven by the way dunes modify the local flow field Bristow et al. (2018); Assis and Franklin (2020). In this study, the coherent structures formed in the wakes of barchan dunes are investigated using measurements of the flow over fixed-bed (i.e., solid) barchan models, both in the wake of an isolated barchan and the interdune region between interacting barchans (Fig. 1(a)). Furthermore, the interactions between the flow structures shed by the dunes and the structures in the incoming boundary layer are analyzed.

  • Unsteady dynamics of turbulent flow in the wakes of barchan dunes modulated by overlying boundary-layer structure

    by Nathaniel R. Bristow, Gianluca Blois, James L. Best, Kenneth T. Christensen

    The dynamics of turbulent flow structures in the wakes of barchan dunes is investigated to understand the complex, long-range interactions that occur between these three-dimensional bedforms. High-frame-rate stereo-particle image velocimetry measurements are collected from the cross-stream plane in a refractive-index-matched flume, wherein rigid models are immersed in the logarithmic region of a turbulent boundary layer. Through application of Taylor's hypothesis, limited-domain pseudo-three-dimensional reconstructions of the flow are made, wherein coherent structures are identified in the wake of an isolated barchan that resemble hairpin-like vortices. Amplitude modulation analysis, based on wavelet decomposition of velocity fluctuations and swirling strength, suggests a correlation between the shedding of these coherent structures and the passage of large-scale motions (LSMs) aloft in the turbulent boundary layer within which the barchan dune is immersed. Impulse analysis of shear stress events shows that, while the hairpin-like structures predominantly induce ejections of low-momentum fluid, the intermittent passage of an overlying high-momentum LSM yields intense sweep events as they impact the wall. Similar flow dynamics is found in dune–dune collision configurations involving barchan dunes arranged in tandem, with the exception that significant flow asymmetries are introduced, resulting in structures resembling single-legged hairpin-like (or ‘cane’) vortices being identified in conditional averages. These results provide insight into both the morphodynamics of dune interactions as well as the interactions between boundary-layer structure and roughness elements protruding into the log layer.


  • Open Access

    The Origin of Aeolian Dunes – PIV measurements of flow structure over early stage protodunes in a refractive-index-matching flume

    by Nathaniel Bristow, James Best, Kenneth Christensen, Matthew Baddock, Giles Wiggs, Pauline Delorme, Joanna Nield

    Understanding the initiation of aeolian dunes poses significant challenges due to the strong couplings between turbulent fluid flow, sediment transport, and bedform morphology. While much is known concerning the dynamics of more mature bedforms, open questions remain as to how protodunes are formed, as well as the mechanisms by which they continue to evolve. The structure of the turbulent flow field drives the mobilization or deposition of sediment, thus controlling the initial formation of sand patches, yet is also strongly influenced itself by local conditions such as surface roughness and moisture. Furthermore, an additional feedback on the flow and transport is exerted by the sand patches themselves once they begin to form.As protodunes begin to develop from this initial deposition, their morphologies possess unique characteristics involving a reverse asymmetry of the stoss and lee sides, wherein the crest begins upstream, close to the toe, and gradually shifts downstream toward the "regular" asymmetric profile exhibited by more mature dunes. However, these early stages of development also involve very gentle slopes and low profiles which make field measurements of the associated flow particularly challenging.The current research effort involves a combination of field measurements, documenting the initiation and morphological development of sand patches and protodunes, in concert with detailed measurements of the flow-form interactions in a laboratory flume. The work presented herein focuses primarily on experiments conducted in a unique flow facility wherein high-resolution measurements of the turbulent flow field associated with the early stages of protodune development are obtained utilizing particle-image velocimetry (PIV) in a refractive-index-matched (RIM) environment. The RIM technique facilitates flow measurements extremely close to model surfaces as well as unimpeded optical access which are critical to understanding the flow-form coupling. A series idealized, fixed-bed models are fabricated to mimic the key morphological characteristics of early protodune development observed in the field, and the flow measurements associated with them are analyzed to reveal the mechanisms controlling the bedform dynamics.

  • Open Access

    Proto-dune formation under a bimodal wind regime

    by Pauline Delorme, Giles Wiggs, Matthew Baddock, Joanna Nield, James Best, Kenneth Christensen, Nathaniel Bristow, Andrew Valdez, Philippe Claudin

    Early-stage aeolian bedforms develop into sand dunes through complex interactions between flow, sediment transport and surface topography. Depending on the specific environmental and wind conditions the mechanisms of dune formation, and ultimately the shape of the nascent dunes, may differ. Here, we investigate the formation of a proto-dune-field, located in the Great Sand Dunes National Park ( Colorado, USA), using a three dimensional linear stability analysis.We use in-situ measurements of wind and sediment transport, collected during a one-month field campaign, as part of a linear stability analysis to predict the orientation and wavelength of the proto-dunes.We find that the output of the linear stability analysis compares well to high-resolution Digital Elevation Models measured using terrestrial laser scanning. Our findings suggest that the bed instability mechanism is a good predictor of proto-dune development on sandy surfaces with a bimodal wind regime.