ESEdith Sotelo

Edith Sotelo

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Edith Sotelo has a total of 10 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Impact of connected secondary fractures on the seismic reflectivity of large primary fractures

    by Edith Sotelo, J Germán Rubino, Nicolás D Barbosa, Santiago G Solazzi, Klaus Holliger

    SUMMARY: Large fractures tend to dominate the hydraulic and mechanical properties of fracture networks and, consequently, of fractured rock masses. Hence, their characterization is of primary interest in a variety of applications. Seismic reflection is a non-invasive tool that allows for the characterization of large fractures due to the high mechanical contrast that they commonly present with respect to their embedding background. Smaller secondary fractures are generally connected to the large primary fractures, thus, creating a network for fluid flow. This, in turn, allows for wave-induced fluid pressure diffusion (FPD) to prevail between the intersecting secondary and the large primary fractures, which may have a pronounced, albeit as of yet unexplored, impact on the compliance and the reflectivity of the large primary fractures. To explore this fundamental problem, we investigate the impact that such FPD process has on the compliance and the reflectivity of large primary fractures. To this end, we consider several canonical models, which comprise an infinite horizontal primary fracture connected to vertical smaller secondary fractures embedded in a background deemed impermeable throughout the seismic frequency range. The individual models differ only with regard to the secondary fracture properties (e.g. length, aperture, mechanical moduli). For comparison, we also consider a reference model that disregards the secondary fractures. To constrain the effect of FPD on the primary fracture, we evaluate its effective seismic response by means of vertical compressional oscillatory tests over samples of the aforementioned models, to subsequently perform averaging of the vertical components of stress and strain. We use these results to estimate first the P-wave modulus and then to compute the normal compliance and reflectivity of the primary fracture. Our results show that both the compliance and reflectivity of the primary fracture increase by more than one order-of-magnitude with respect to the reference model. These findings point to a very significant enhancement of the seismic visibility of large fractures due to FPD with connected secondary ones.


  • Homogenization of Porous Thin Layers With Internal Stratification for the Estimation of Seismic Reflection Coefficients

    by Edith Sotelo, Nicolás D. Barbosa, Santiago G. Solazzi, J. Germán Rubino, Marco Favino, Klaus Holliger

    Stratified thin layers often present a prominent mechanical contrast with regard to the embedding background and, hence, are important targets for seismic reflection studies. An efficient way to study the reflectivity response of these thin layers is to employ their homogenized viscoelastic equivalents. We aim to homogenize a simple, yet realistic, thin‐layer model, which is composed of a finite non‐periodic sequence of homogeneous porous strata embedded in a background deemed impermeable at the seismic frequencies. The overarching objective is to reproduce the reflectivity response of such stratified thin layers. However, the estimation of the equivalent moduli is inherently affected by the boundary conditions (BC) associated with the embedding background. Therefore, classical homogenization procedures, which assume the existence of a periodic structure, are not readily applicable. We, therefore, propose a novel homogenization procedure that incorporates naturally the appropriate BC. To this end, we consider a sample that includes both a part of the background and a section of the thin layer, to which we apply classical oscillatory relaxation tests. However, we estimate the average of stress and strain components only over the thin layer section of interest. To test the accuracy of the method, we consider a sandstone composed of two strata saturated with different fluids embedded in impermeable half‐spaces. After estimating the corresponding equivalent moduli, we compare the resulting P‐wave reflectivities with those obtained using the original model. Our results show that the inferred viscoelastic equivalent closely reproduces the reflectivities of the stratified thin layer in the seismic frequency range.


  • Open Access

    Seismic reflectivity of fractures: the impact of secondary connected fractures

    by Edith Sotelo, J. German Rubino, Nicolas D. Barbosa, Santiago G. Solazzi, Klaus Holliger

    Fractures are ubiquitous through out the Earth's upper crust and dominate the mechanical and hydraulic properties of the affected rock masses. Indeed, open fractures act as fluid conduits and, commonly, flow is controlled by larger fractures, which are, in turn, likely to be connected to smaller ones. Therefore, fracture characterization is of paramount importance for many pertinent applications, such as geothermal energy production, CO2 sequestration, nuclear waste storage, and hydrocarbon exploration. Seismic reflection methods are useful tools for fracture characterization due to the generally high reflectivity that large fractures exhibit as a consequence of their strong mechanical contrast with the embedding intact background. The magnitude of this mechanical contrast is known to be strongly affected by fracture-to-background wave-induced fluid pressure diffusion (FPD). Conversely, the FPD effects associated with secondary connected fractures remain so far unexplored. We investigate the influence of FPD on the normal compliance and on the vertical incidence PP reflectivity of a large fracture that is hydraulically connected to smaller fractures. To this end, we use several models that consist of an infinite horizontal main fracture connected to multiple vertical secondary fractures of finite length. This fracture system is embedded in impermeable background. The individual models differ only with regard to the geometrical (e.g., length and aperture), and physical properties (e.g., permeability and bulk modulus) of the secondary fractures. For comparison, we also calculate the normal compliance and the reflectivity of an isolated infinite horizontal fracture. To assess the changes of fracture compliance due to FPD, we perform a vertical compressional oscillatory test over samples of the aforementioned models that include part of the fracture system and the embedding background. This test simulates the FPD effects that a vertically propagating P-wave generates between the main and secondary fractures. Specifically, the wave produces a pressure increase in the horizontal fracture that equilibrates as fluid flows into the secondary vertical fractures. Based on this oscillatory test, we compute the average of the vertical components of strain and stress over the main fracture, which we use to estimate its normal compliance. We then proceed to calculate the PP reflectivity at normal incidence using its inferred P-wave modulus. Our results show that both the compliance and the PP reflectivity of the main fracture increase as much as two-orders of magnitude in response to the presence of secondary fractures. We also find that the physical and geometrical properties of the secondary connected fractures have an influence on the normal compliance and reflectivity of the main fracture.

  • Open Access

    Homogenization of Poroelastic Media without a Representative Elementary Volume for Seismic Applications

    by Edith Sotelo Gamboa, Nicolas D. Barbosa, Santiago G. Solazzi, Marco Favino, J. German Rubino, Klaus Holliger

    The substitution of a heterogeneous poroelastic medium by its homogenized viscoelastic representation is an effective technique to study its seismic response. This homogenization procedure reproduces the dispersive behaviour of the original fast P- and S-waves. This dispersive nature results from energy dissipation that occurs when a wave induces pressure gradients between the heterogenous parts of a poroelastic medium that are equilibrated by fluid exchange. The underlying homogenization approach is to apply oscillatory tests on a representative elementary volume (REV) of the poroelastic medium to find the equivalent moduli. The REV is a sample that is typical of the entire medium under consideration and that ensures results independent of boundary conditions. This is, the REV should be larger than the heterogeneities but much smaller than the medium size. Additionally, in poroelastodynamics, the size of the heterogeneities in the REV is dictated by the scale at which the wave-induced fluid exchange takes place. We focus on the mesoscale. At this scale, fluid exchange occurs between heterogeneities that are larger than the grain size but smaller than the wavelength. However, there are poroelastic media of interest that present heterogeneities of comparable size to that of the domain. Here, the REV concept does no longer apply since the poroelastic sample under examination is affected by the boundaries of the domain. For such scenarios, we propose a novel homogenization method that incorporates the boundary effects produced by the surrounding medium. In this method, we take a sample that consist of the affected poroelastic heterogeneity together with part of the embedding medium. Then, we perform the classical oscillatory tests over this ensemble. Finally, to obtain the homogenized moduli of the poroelastic medium, we perform the averaging of strain and stress only over this domain of interest. As examples, we present a poroelastic system of a single sand layer saturated with gas at the top and water at the bottom that is embedded in impermeable background. We also study a water-saturated poroelastic set consisting of a permeable fracture surrounded by a less permeable damage zone that is also embedded in impermeable background. We idealize these cases as 2D media, assuming that the poroelastic system is infinite along the layering plane but bounded perpendicular to it by impermeable half-spaces. The samples subjected to oscillatory tests consist of a piece of the semi-infinite poroelastic domain together with the corresponding bounding half-spaces. To test the viability and accuracy of the method, we compare reflectivities at the top interface of the half-space and homogenized medium against those obtained at the top interface of the half-space and the original poroelastic system. Results show that errors are of the order of 1 %. The proposed method can be readily extended to 3D and more complex models.

  • Open Access

    Fractures in Low‐Permeability Rocks: Can Poroelastic Effects Associated With Damage Zones Enhance Their Seismic Visibility?

    by Edith Sotelo, J. Germán Rubino, Santiago G. Solazzi, Nicolás D. Barbosa, Klaus Holliger

    Fluid pressure diffusion (FPD) between a fracture and a porous permeable background can increase the normal compliance of the fracture and, thus, its reflectivity. However, many fractured environments of interest are associated with background rocks that can be regarded as largely impermeable for the the typical frequencies employed in seismic surveys. Nonetheless, there is evidence to suggest that the seemingly ubiquitous presence of damaged zones (DZs) associated with fractures may provide the necessary hydraulic communication between fractures and their immediate surroundings for FPD to occur. Here, we assess the pertinence of this phenomenon. To this end, we consider a 1D elastic‐poroelastic model, which comprises a poroelastic system consisting of a fracture embedded in adjacent DZ layers. This system is enclosed in an impermeable background represented by two elastic half‐spaces. We calculate the frequency‐dependent P‐wave reflectivity at normal incidence at the background‐DZ interface for different permeabilities, thicknesses, and porosities of the DZ. We also evaluate the corresponding normal fracture compliance. Our results show that, when accounting for the presence of a DZ surrounding an individual fracture, FPD effects between these regions induce a higher seismic reflectivity and a higher normal compliance compared to that of a hydraulically isolated fracture. This, in turn, implies that, even in largely impermeable environments, the seismic visibility of fractures can be enhanced through FPD enabled by the presence of DZs.


  • Open Access

    Poroelastic effects of the damaged zone on seismic fracture reflectivity

    by Edith Sotelo Gamboa, Santiago G. Solazzi, German J. Rubino, Nicolas D. Barbosa, Klaus Holliger

    The presence of fractures has a predominant influence on the hydraulic and mechanical behavior of rocks. These effects are particularly pronounced and relevant for otherwise largely impermeable and stiff formations. There is widespread evidence pointing to the ubiquitous presence of damaged zones surrounding fractures and faults. The enhanced permeability associated with these zones can promote fluid pressure diffusion in the vicinity of fractures when seismic waves travel through the corresponding subsurface volume. This process, together with the inherent mechanical weakness of damaged zones, is expected to affect the seismic reflectivity of fractures and faults. We investigate these effects based on Biot’s theory of poroelasticity. To this end, we consider a 1D layered representation of the fracture and the associated damaged zone in conjunction with embedding elastic and impermeable half-spaces. We compare a fully elastic fracture-background reference model with a model consisting of a poroelastic fracture and damaged zone enclosed within an elastic background. For these two models, we compute the normal incidence seismic P-wave reflectivities at the background-fracture and at background-damaged zone interfaces, respectively. We also include a model that represents the fracture-damaged zone poroelastic system as an equivalent viscoelastic layer. We aim to test the validity of this representation since it would imply that a similar correspondence is possible to establish when more realistic descriptions of the damaged zone are considered. For this additional model, the viscoelastic layer is characterized by its frequency-dependent P-wave modulus, estimated by applying White’s classical upscaling procedure for 1D poroelastic media composed of alternating layers. We test the validity of the elastic-viscolastic model by comparing its reflectivity against the corresponding results from the elastic-poroelastic model. In doing so, we find that the simplified elastic-viscoelastic model faithfully reproduces the reflectivity of its elastic-poroelastic counterpart up to a threshold frequency, at which resonances produced within the viscoelastic layer become dominant. Overall, our results show that, in the seismic frequency range, there is a substantial increase in seismic fracture reflectivity resulting from the combined effects of fluid pressure diffusion and mechanical weakening associated with the surrounding damaged zone. This, in turn, indicates that the seismic reflectivity of a fracture may indeed be dominated by the thickness and physical properties of its surrounding damaged zone rather than by the properties of the fracture sensu stricto.