ISIgor V. Shtrom

Igor V. Shtrom

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Igor V. Shtrom has a total of 18 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Intrinsic Defect-Related Photoluminescence in Single-Crystalline Tin Dioxide

    by Vadim F. Agekyan, Nikolai G. Filosofov, Alexey Yu. Serov, Igor V. Shtrom

    Photoluminescence studies of single-crystalline SnO2 grown by chemical vapor transport from SnCl4 and H2O vapors were carried out in the visible spectral range. A non-trivial dependence of the 2.6 eV emission band on temperature and optical excitation level was observed. Based on the obtained data, the ionization energy of a shallow donor in SnO2 was estimated to be 7 meV. Additionally, a model of energy levels and radiative transitions associated with shallow donors and intrinsic defects is proposed.

  • Open Access

    GaAs Nanowire Growth by MBE with Catalyst Forming Eutectic Points with Both Elements

    by Nickolay V. Sibirev, Ilya P. Soshnikov, Igor V. Ilkiv, Evgenii V. Ubyivovk, George E. Cirlin, Igor V. Shtrom

    A3B5 nanowires are usually grown via the vapor-liquid-solid mechanism. Species from the vapor are incorporated into the nanowires using a catalyst droplet. Typically, the droplet is a low-melting-point eutectic alloy of catalyst and group III metal. This growth imposes a set of limitations on the heterostructure formation and doping. Axial A3B5 heterostructure nanowires obtained via an interchange of group III metals suffer from blurring and kinking. Amphoteric dopants such as Si could act as donors and acceptors, leading to electron-to-hole ratio oscillations along the nanowire. To overcome these limits, the growth with a catalyst, which could dissolve both components of the nanowire, is studied. Tin has a eutectic with both components, As and Ga. This makes the growth of GaAs nanowires with a tin catalyst different from that with standard catalysts. Nanowire growth occurs with at least two types of catalysts, Ga-rich and Ga-poor (As-rich). This article aims to study the nanowire growth with an Sn catalyst. For the first time, the growth of GaAs nanowires using a tin catalyst by molecular beam epitaxy is shown. Tin can serve as a catalyst not only for the chemical growth of GaAs nanowires but also as a nucleation site for their growth. Both compositions of the catalyst are observed. The annealing of a thin film of tin on a Si and GaAs substrate has also been studied. At temperatures below 450 °C, small metal droplets form, while tin dissolves into the substrate at higher temperatures.

  • Open Access

    Lead Catalyzed GaAs Nanowires Grown by Molecular Beam Epitaxy

    by Igor V. Shtrom, Nickolai V. Sibirev, Ilya P. Soshnikov, Igor V. Ilkiv, Evgenii V. Ubyivovk, Rodion R. Reznik, George E. Cirlin

    This study investigates the growth of gallium arsenide nanowires, using lead as a catalyst. Typically, nanowires are grown through the vapor–solid–liquid mechanism, where a key factor is the reduction in the nucleation barrier beneath the catalyst droplet. Arsenic exhibits limited solubility in conventional catalysts; however, this research explores an alternative scenario in which lead serves as a solvent for arsenic, while gallium and lead are immiscible liquids. Liquid lead easily dissolves in Si as well as in GaAs. The preservation of the catalyst during the growth process is also addressed. GaAs nanowires have been grown by molecular beam epitaxy on silicon Si (111) substrates at varying temperatures. Observations indicate the spontaneous doping of the GaAs nanowires with both lead and silicon. These findings contribute to a deeper understanding of the VLS mechanism involved in nanowire growth. They are also an important step in the study of GaAs nanowire-doping processes.


  • Open Access

    Growth of Self-Catalyzed InAs/InSb Axial Heterostructured Nanowires: Experiment and Theory

    by Omer Arif, Valentina Zannier, Vladimir G. Dubrovskii, Igor V. Shtrom, Francesca Rossi, Fabio Beltram, Lucia Sorba

    The growth mechanisms of self-catalyzed InAs/InSb axial nanowire heterostructures are thoroughly investigated as a function of the In and Sb line pressures and growth time. Some interesting phenomena are observed and analyzed. In particular, the presence of In droplet on top of InSb segment is shown to be essential for forming axial heterostructures in the self-catalyzed vapor-liquid-solid mode. Axial versus radial growth rates of InSb segment are investigated under different growth conditions and described within a dedicated model containing no free parameters. It is shown that widening of InSb segment with respect to InAs stem is controlled by the vapor-solid growth on the nanowire sidewalls rather than by the droplet swelling. The In droplet can even shrink smaller than the nanowire facet under Sb-rich conditions. These results shed more light on the growth mechanisms of self-catalyzed heterostructures and give clear route for engineering the morphology of InAs/InSb axial nanowire heterostructures for different applications.