Channa Rajanayaka

Channa Rajanayaka

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Channa Rajanayaka has a total of 69 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Integrated assessment and classification of inland water chemistry in New Zealand

    by Kei Nakagawa, Hiroki Amano, Channa Rajanayaka, Jing Yang


  • Open Access

    Hybrid Modelling of Water Quality Dynamics: Data Assimilation with Machine Learning for Enhanced Predictions

    by Parul Tiwari, Channa Rajanayaka, Jing Yang

    Predicting Escherichia coli concentrations in recreational waters is essential for safeguarding public health and ensuring water quality compliance. This study applies time series analysis to forecast E. coli levels at six sites in New Zealand using historical data from 2005 to 2020. The goal is to develop a reliable predictive model that helps in proactive water management and early contamination warnings. Initially, an autoregressive integrated moving average (ARIMA) model was applied with parameters selected through a stepwise fitting approach. However, ARIMA demonstrated limitations in accurately capturing E. coli variability due to external environmental factors. Then the seasonal autoregressive integrated moving average with exogenous regressors (SARIMAX) model was applied for better predictive performance using water quality parameters and climate variables as input predictors. Results showed that no single water quality parameter consistently predicted E. coli across all sites, though total phosphorus emerged as a key predictor in five locations. The four-year forecasts showed patterns aligned with historical trends, suggesting reasonable predictive capability. However, forecast accuracy varied across sites, likely due to site-specific hydrological conditions. This study highlights the importance of site-specific modelling, real-time environmental data integration, and advanced machine learning techniques to improve water quality predictions. A refined forecasting approach can support early warning systems and risk-based decision-making, ultimately reducing health risks associated with microbial contamination in recreational waters.


  • Open Access

    National Nutrient Contribution Dynamics in New Zealand Rivers

    by Jing Yang, Catherine Moore, Channa Rajanayaka, Hisako Shiona, Brioch Hemmings, Paul Oluwunmi, Stewart Cameron, Simon J. R. Woodward

    River water quality degradation poses significant challenges for catchment nutrient management. Effective catchment‐scale nutrient management requires a clear understanding of how different contaminants are transported along different flowpaths. Here we investigated nutrient transport pathways and their relative contributions for two prevalent contaminants (total phosphorus: TP; and nitrate‐nitrite nitrogen: NNN) at 58 river water quality sites across New Zealand, by applying the Bayesian, chemistry‐assisted hydrograph separation approach, in which river flow is partitioned into three components: near‐surface event flow (fast flow), seasonal shallow groundwater discharge (medium flow) and long‐term groundwater discharge (slow flow). After excluding 15 sites that were impacted by dam/lake outflows or model convergence, results from 43 sites revealed that on an annual basis, medium flow contributes over 50% of annual streamflow at 19 sites and fast flow contribution exceeds 50% at 9 sites. Regarding TP load, TP is primarily transported via fast flow (26 sites), followed by medium flow (14 sites). Concerning NNN loads, most NNN originates from medium flow (25 sites). Correlation analysis with upstream catchment characteristics indicated that annual flow is most highly correlated with precipitation and potential evapotranspiration, followed by geomorphologic factors (e.g., slope) and livestock density, whereas TP loads are most strongly correlated with the number of days with high rainfall, catchment elevation and dairy cow density, and NNN loads are most correlated with annual temperature, geomorphology and geology factors (e.g., slope), as well as land cover (e.g., pastoral) and livestock density which serve as sources of NNN. These findings provide valuable insights for both surface and subsurface transport pathways in New Zealand. The approach offers a practical framework for similar assessments in other regions, to mitigate water quality degradation.


  • Open Access

    Derivation of physically based soil hydraulic parameters in New Zealand by combining soil physics and hydropedology

    by J. A. P. Pollacco, J. Fernández‐Gálvez, T. Webb, S. Vickers, B. Robertson, S. McNeill, L. Lilburne, C. Rajanayaka, H. W. Chau

    Field‐characterised soil morphological data (to 1 m depth) and modelled soil water release characteristics are recorded in the S‐map database for soils covering approximately 40% of New Zealand's soil area. This paper shows the development of the Smap‐Hydro database that estimates hydraulic parameters by synergising soil morphologic data recorded in S‐map and soil physics. The Smap‐Hydro parameters were derived using the bi‐modal Kosugi hydraulic function. The validity of the Smap‐Hydro parameters was tested by applying them within an uncalibrated physically based hydrological model (HyPix) and comparing results with soil water content, θ , measured with Aquaflex soil moisture probes (0–40 cm deep) at 24 sites across New Zealand. The HyPix model provided an excellent fit with observed soil water content for 25% of the sites, a good fit for 33% of the sites and a poor fit for 42% of the sites. Applying the model to all soils in the S‐map database required adjustments for the occurrence of rock fragments, hydraulic discontinuities caused by soil pans and required the addition of boundary conditions for water tables and the occurrence of impermeable rock. A discussion on how we can further synergise the development of pedotransfer functions with knowledge of soil physics is provided.


  • Open Access

    Metamodelling of Naturalised Groundwater Levels at a Regional Level in New Zealand

    by Jing Yang, Channa Rajanayaka, Christopher J. Daughney, Doug Booker, Rebecca Morris, Mike Thompson

    Groundwater is under pressure from increasing demands for agriculture, industry, domestic uses and support of ecosystems. Understanding the natural state of a groundwater system helps policy makers manage groundwater sustainably. Here we developed a metamodelling approach based on stepwise linear regression that emulates the functionality of physically-based models in the three primary aquifers of the Greater Wellington region of New Zealand. The inputs for the metamodels included local weather data, and nearby river flow data. The metamodels were calibrated and validated against the available simulations of naturalised groundwater level time series from physically-based models for 47 selected wells. For 36 of these wells, the metamodels had Nash-Sutcliffe Efficiency and coefficient of determination over 0.5, showing that they could adequately mimic naturalised groundwater level dynamics as simulated by the physically-based groundwater models. The remaining 11 wells had unsatisfactory performance and were typically located far away from rivers or along the coast. The results also showed that modelled groundwater levels in the aquifer’s recharge zone were more sensitive to short-term (less than 2 weeks lag) than long-term river flow (above 4 weeks to 1 year lag), whereas the converse pattern was observed for the aquifer’s discharge zone. Although some special considerations are needed, this metamodelling framework can be generally applied to other aquifers to support groundwater resource management at a lower cost than updating physically-based models.


  • Open Access

    Parameterization of a National Groundwater Model for New Zealand

    by James Griffiths, Jing Yang, Ross Woods, Christian Zammit, Rasool Porhemmat, Ude Shankar, Channa Rajanayaka, Jeffrey Ren, Nicholas Howden

    Groundwater is a vital source of water for humanity, with up to 50% of global drinking water and 43% of irrigation water being derived from such sources. Quantitative assessment and accounting of groundwater is essential to ensure its sustainable management and use. TopNet-GW is a parsimonious groundwater model that was developed to provide groundwater simulation at national, regional, and local scales across New Zealand. At a national scale, the model can help local government authorities estimate groundwater resource reliability within and between regions. However, as many catchments are ungauged, the model cannot be calibrated to local conditions against observed data. This paper, therefore, describes a method to derive an a priori, reach-scale groundwater model parameter set from national-scale hydrogeological datasets. The parameter set includes coefficients of lateral (kl) and vertical (kr) conductivity and effective aquifer storage (S). When the parameter set was used with the TopNet-GW model in the Wairau catchment in the Marlborough region (South Island, New Zealand), it produced a poor representation of peak river flows but a more accurate representation of low flows (overall NSE 0.64). The model performance decreased in the smaller Opawa catchment (NSE 0.39). It is concluded that the developed a priori parameter set can be used to provide national groundwater modeling capability in ungauged catchments but should be used with caution, and model performance would benefit greatly from local scale calibration. The parameter derivation method is repeatable globally if analogous hydrological and geological information is available and thus provides a basis for the parameterization of groundwater models in ungauged catchments. Future research will assess the spatial variability of parameter performance at a national scale in New Zealand.


  • Open Access

    Upscaling point-scale soil hydraulic properties for application in a catchment model using Bayesian calibration: An application in two agricultural regions of New Zealand

    by Channa Rajanayaka, Simon J. R. Woodward, Linda Lilburne, Sam Carrick, James Griffiths, M. S. Srinivasan, Christian Zammit, Jesús Fernández-Gálvez

    Hydrological modeling for landscape and catchment scale applications requires upscaling of soil hydraulic parameters which are generally only available at point scale. We present a case study where hourly root zone soil water content and drainage observations from nine flat, pastoral sites (Waikato and Canterbury regions in New Zealand) were used to develop an upscaling approach to parameterize the soil water balance module of the TopNet catchment model, based on scaling multi-layer soil profile information from the national soil data base, S-map, to the single-layer soil profile used in TopNet. Using a Bayesian calibration approach, the hydraulic behavioral parameters of TopNet's soil water balance module were identified. Of the eleven calibration parameters considered three were found to be insensitive to data (stress point, unsaturated hydraulic conductivity and infiltration rate); three were correlated and could be determined from specific soil water content observations (wilting point, field capacity and drainable water); and five were correlated and could be determined from combined specific soil water content and drainage observations (drainage rate, saturated hydraulic conductivity profile, effective soil depth, soil water holding capacity and wetting front suction). Based on the eight correlated parameters, upscaling functions were then developed to derive suitable model parameters from S-map-hydro for each site. The validity of the upscaling functions was verified at each site. The approach used in this research can be used to parameterize the TopNet model at other similar locations, and also provides a transferable framework to parameterize other catchment-scale hydrology models where point-scale soil hydraulic data available.


  • Open Access

    HyPix: 1D physically based hydrological model with novel adaptive time-stepping management and smoothing dynamic criterion for controlling Newton–Raphson step

    by J.A.P. Pollacco, J. Fernández-Gálvez, P. Ackerer, B. Belfort, L. Lassabatere, R. Angulo-Jaramillo, C. Rajanayaka, L. Lilburne, S. Carrick, D.A. Peltzer


  • Open Access

    Simplified Modelling of Coupled Surface-Groundwater Transport Using a Subcatchment Mass Balance Approach

    by Alexander Hewgill Elliott, Channa Rajanayaka, Jing Yang

    Catchment models based on steady-state mass balances enable rapid assessment of contaminant fluxes and concentrations in rivers. However, such models often focus on surface drainage, without taking groundwater into account. This paper presents a novel steady-state mass-balance catchment model that includes groundwater. The model incorporates a conceptual reservoir under each surface subcatchment, with lateral subsurface exchanges between adjacent reservoirs and vertical exchanges between the reservoirs and the surface drainage network. This leads to an easily solved coupled algebraic system of equations. The approach is demonstrated for nitrogen in a meso-scale catchment in New Zealand. Exchange coefficients were extracted from a full groundwater model, while recharge sources were obtained from separate hydrological and leaching models. Other parameters such as decay coefficients were determined through calibration. Although the exchange coefficients are generated from a detailed groundwater model, alternatives such as simple groundwater models or phreatic contours could be used instead. The effective decay parameters were different from what was expected, which is partly due to the model structure (for example, the assumption of complete mixing in each reservoir), but may also be due to input uncertainty. The applications demonstrated the successful deployment of a novel, simple, fast-running and flexible coupled surface-groundwater model.