Claudio Navacchi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Claudio Navacchi has a total of 45 co-authors. Here are the top co-authors by number of shared publications:
- Wolfgang Wagner
Department of Geodesy and Geoinformation, TU Wien, Vienna, Austria
9 shared publications - Bernhard Bauer-Marschallinger
Department of Geodesy and Geoinformation, TU Wien, Vienna, Austria
6 shared publications - Senmao Cao
Earth Observation Data Centre for Water Resources Monitoring (EODC), 1030 Vienna, Austria
4 shared publications - Felix Reuß
Department of Geodesy and Geoinformation, Technische Universität Wien, 1040 Vienna, Austria
3 shared publications - Wouter Dorigo
Department of Geodesy and Geoinformation, TU Wien, Wiedner Hauptstrasse 8–10, 1040 Vienna, Austria
3 shared publications - Alena Dostálová
Department of Geodesy and Geoinformation, Vienna University of Technology, 1040 Vienna, Austria
2 shared publications
Latest Publications
- Open Access
- 22 February 2025
- Published by Elsevier in Science of Remote Sensing
- Vol. 11
Evaluating the robustness of Bayesian flood mapping with Sentinel-1 data: A multi-event validation study
- 22 February 2025
- Published by Elsevier in Science of Remote Sensing
- Vol. 11
Open AccessEvaluating the robustness of Bayesian flood mapping with Sentinel-1 data: A multi-event validation study
- Open Access
- 22 January 2025
- Published by MDPI AG in Remote Sensing
- Vol. 17 (3) , 361
Using a Neural Network to Model the Incidence Angle Dependency of Backscatter to Produce Seamless, Analysis-Ready Backscatter Composites over Land
In order to improve the current standard of analysis-ready Synthetic Aperture Radar (SAR) backscatter data, we introduce a machine learning-based approach to estimate the slope of the backscatter–incidence angle relationship from several backscatter statistics. The method requires information from radiometric terrain-corrected gamma nought time series and overcomes the constraints of a limited orbital coverage, as exemplified with the Sentinel-1 constellation. The derived slope estimates contain valuable information on scattering characteristics of different land cover types, allowing for the correction of strong forward-scattering effects over water bodies and wetlands, as well as moderate surface scattering effects over bare soil and sparsely vegetated areas. Comparison of the estimated and computed slope values in areas with adequate orbital coverage shows good overall agreement, with an average RMSE value of 0.1 dB/° and an MAE of 0.05 dB/°. The discrepancy between RMSE and MAE indicates the presence of outliers in the computed slope, which are attributed to speckle and backscatter fluctuations over time. In contrast, the estimated slope excels with a smooth spatial appearance. After correcting backscatter values by normalising them to a certain reference incidence angle, orbital artefacts are significantly reduced. This becomes evident with differences up to 5 dB when aggregating the normalised backscatter measurements over certain time periods to create spatially seamless radar backscatter composites. Without being impacted by systematic differences in the illumination and physical properties of the terrain, these composites constitute a valuable foundation for land cover and land use mapping, as well as bio-geophysical parameter retrieval.
- 22 January 2025
- Published by MDPI AG in Remote Sensing
- Vol. 17 (3) , 361
Open AccessUsing a Neural Network to Model the Incidence Angle Dependency of Backscatter to Produce Seamless, Analysis-Ready Backscatter Composites over Land
In order to improve the current standard of analysis-ready Synthetic Aperture Radar (SAR) backscatter data, we introduce a machine learning-based approach to estimate the slope of the backscatter–incidence angle relationship from several backscatter statistics. The method requires information from radiometric terrain-corrected gamma nought time series and overcomes the constraints of a limited orbital coverage, as exemplified with the Sentinel-1 constellation. The derived slope estimates contain valuable information on scattering characteristics of different land cover types, allowing for the correction of strong forward-scattering effects over water bodies and wetlands, as well as moderate surface scattering effects over bare soil and sparsely vegetated areas. Comparison of the estimated and computed slope values in areas with adequate orbital coverage shows good overall agreement, with an average RMSE value of 0.1 dB/° and an MAE of 0.05 dB/°. The discrepancy between RMSE and MAE indicates the presence of outliers in the computed slope, which are attributed to speckle and backscatter fluctuations over time. In contrast, the estimated slope excels with a smooth spatial appearance. After correcting backscatter values by normalising them to a certain reference incidence angle, orbital artefacts are significantly reduced. This becomes evident with differences up to 5 dB when aggregating the normalised backscatter measurements over certain time periods to create spatially seamless radar backscatter composites. Without being impacted by systematic differences in the illumination and physical properties of the terrain, these composites constitute a valuable foundation for land cover and land use mapping, as well as bio-geophysical parameter retrieval.
- Open Access
- 5 January 2024
- Published by Elsevier in Science of Remote Sensing
- Vol. 9
Evaluation of limiting factors for SAR backscatter based cut detection of alpine grasslands
- 5 January 2024
- Published by Elsevier in Science of Remote Sensing
- Vol. 9
Open AccessEvaluation of limiting factors for SAR backscatter based cut detection of alpine grasslands
- Open Access
Utilising Sentinel-1’s Orbital Stability for Efficient Pre-Processing of Radiometric Terrain Corrected Gamma Nought Backscatter
Radiometric Terrain Corrected (RTC) gamma nought backscatter, which was introduced around a decade ago, has evolved into the standard for analysis-ready Synthetic Aperture Radar (SAR) data. While working with RTC backscatter data is particularly advantageous over undulated terrain, it requires substantial computing resources given that the terrain flattening is more computationally demanding than simple orthorectification. The extra computation may become problematic when working with large SAR datasets such as the one provided by the Sentinel-1 mission. In this study, we examine existing Sentinel-1 RTC pre-processing workflows and assess ways to reduce processing and storage overheads by considering the satellite’s high orbital stability. By propagating Sentinel-1’s orbital deviations through the complete pre-processing chain, we show that the local contributing area and the shadow mask can be assumed to be static for each relative orbit. Providing them as a combined external static layer to the pre-processing workflow, and streamlining the transformations between ground and orbit geometry, reduces the overall processing times by half. We conducted our experiments with our in-house developed toolbox named wizsard, which allowed us to analyse various aspects of RTC, specifically run time performance, oversampling, and radiometric quality. Compared to the Sentinel Application Platform (SNAP) this implementation allowed speeding up processing by factors of 10–50. The findings of this study are not just relevant for Sentinel-1 but for all SAR missions with high spatio-temporal coverage and orbital stability.
Open AccessUtilising Sentinel-1’s Orbital Stability for Efficient Pre-Processing of Radiometric Terrain Corrected Gamma Nought Backscatter
Radiometric Terrain Corrected (RTC) gamma nought backscatter, which was introduced around a decade ago, has evolved into the standard for analysis-ready Synthetic Aperture Radar (SAR) data. While working with RTC backscatter data is particularly advantageous over undulated terrain, it requires substantial computing resources given that the terrain flattening is more computationally demanding than simple orthorectification. The extra computation may become problematic when working with large SAR datasets such as the one provided by the Sentinel-1 mission. In this study, we examine existing Sentinel-1 RTC pre-processing workflows and assess ways to reduce processing and storage overheads by considering the satellite’s high orbital stability. By propagating Sentinel-1’s orbital deviations through the complete pre-processing chain, we show that the local contributing area and the shadow mask can be assumed to be static for each relative orbit. Providing them as a combined external static layer to the pre-processing workflow, and streamlining the transformations between ground and orbit geometry, reduces the overall processing times by half. We conducted our experiments with our in-house developed toolbox named wizsard, which allowed us to analyse various aspects of RTC, specifically run time performance, oversampling, and radiometric quality. Compared to the Sentinel Application Platform (SNAP) this implementation allowed speeding up processing by factors of 10–50. The findings of this study are not just relevant for Sentinel-1 but for all SAR missions with high spatio-temporal coverage and orbital stability.
- Open Access
- 19 August 2022
- Published by Elsevier in ISPRS Journal of Photogrammetry and Remote Sensing
- Vol. 192, 130-141
Utilising Sentinel-1’s orbital stability for efficient pre-processing of sigma nought backscatter
- 19 August 2022
- Published by Elsevier in ISPRS Journal of Photogrammetry and Remote Sensing
- Vol. 192, 130-141
Open AccessUtilising Sentinel-1’s orbital stability for efficient pre-processing of sigma nought backscatter
- Open Access
- 31 July 2022
- Published by MDPI AG in Remote Sensing
- Vol. 14 (15) , 3673
Satellite-Based Flood Mapping through Bayesian Inference from a Sentinel-1 SAR Datacube
Spaceborne Synthetic Aperture Radar (SAR) are well-established systems for flood mapping, thanks to their high sensitivity towards water surfaces and their independence from daylight and cloud cover. Particularly able is the 2014-launched Copernicus Sentinel-1 C-band SAR mission, with its systematic monitoring schedule featuring global land coverage in a short revisit time and a 20 m ground resolution. Yet, variable environment conditions, low-contrasting land cover, and complex terrain pose major challenges to fully automated flood monitoring. To overcome these issues, and aiming for a robust classification, we formulate a datacube-based flood mapping algorithm that exploits the Sentinel-1 orbit repetition and a priori generated probability parameters for flood and non-flood conditions. A globally applicable flood signature is obtained from manually collected wind- and frost-free images. Through harmonic analysis of each pixel’s full time series, we derive a local seasonal non-flood signal comprising the expected backscatter values for each day-of-year. From those predefined probability distributions, we classify incoming Sentinel-1 images by simple Bayes inference, which is computationally slim and hence suitable for near-real-time operations, and also yields uncertainty values. The datacube-based masking of no-sensitivity resulting from impeding land cover and ill-posed SAR configuration enhances the classification robustness. We employed the algorithm on a 6-year Sentinel-1 datacube over Greece, where a major flood hit the region of Thessaly in 2018. In-depth analysis of model parameters and sensitivity, and the evaluation against microwave and optical reference flood maps, suggest excellent flood mapping skill, and very satisfying classification metrics with about 96% overall accuracy and only few false positives. The presented algorithm is part of the ensemble flood mapping product of the Global Flood Monitoring (GFM) component of the Copernicus Emergency Management Service (CEMS).
- 31 July 2022
- Published by MDPI AG in Remote Sensing
- Vol. 14 (15) , 3673
Open AccessSatellite-Based Flood Mapping through Bayesian Inference from a Sentinel-1 SAR Datacube
Spaceborne Synthetic Aperture Radar (SAR) are well-established systems for flood mapping, thanks to their high sensitivity towards water surfaces and their independence from daylight and cloud cover. Particularly able is the 2014-launched Copernicus Sentinel-1 C-band SAR mission, with its systematic monitoring schedule featuring global land coverage in a short revisit time and a 20 m ground resolution. Yet, variable environment conditions, low-contrasting land cover, and complex terrain pose major challenges to fully automated flood monitoring. To overcome these issues, and aiming for a robust classification, we formulate a datacube-based flood mapping algorithm that exploits the Sentinel-1 orbit repetition and a priori generated probability parameters for flood and non-flood conditions. A globally applicable flood signature is obtained from manually collected wind- and frost-free images. Through harmonic analysis of each pixel’s full time series, we derive a local seasonal non-flood signal comprising the expected backscatter values for each day-of-year. From those predefined probability distributions, we classify incoming Sentinel-1 images by simple Bayes inference, which is computationally slim and hence suitable for near-real-time operations, and also yields uncertainty values. The datacube-based masking of no-sensitivity resulting from impeding land cover and ill-posed SAR configuration enhances the classification robustness. We employed the algorithm on a 6-year Sentinel-1 datacube over Greece, where a major flood hit the region of Thessaly in 2018. In-depth analysis of model parameters and sensitivity, and the evaluation against microwave and optical reference flood maps, suggest excellent flood mapping skill, and very satisfying classification metrics with about 96% overall accuracy and only few false positives. The presented algorithm is part of the ensemble flood mapping product of the Global Flood Monitoring (GFM) component of the Copernicus Emergency Management Service (CEMS).
- Open Access
- 17 November 2021
- Published by MDPI AG in Remote Sensing
- Vol. 13 (22) , 4622
A Sentinel-1 Backscatter Datacube for Global Land Monitoring Applications
The Sentinel-1 Synthetic Aperture Radar (SAR) satellites allow global monitoring of the Earth’s land surface with unprecedented spatio-temporal coverage. Yet, implementing large-scale monitoring capabilities is a challenging task given the large volume of data from Sentinel-1 and the complex algorithms needed to convert the SAR intensity data into higher-level geophysical data products. While on-demand processing solutions have been proposed to cope with the petabyte-scale data volumes, in practice many applications require preprocessed datacubes that permit fast access to multi-year time series and image stacks. To serve near-real-time as well as offline land monitoring applications, we have created a Sentinel-1 backscatter datacube for all continents (except Antarctica) that is constantly being updated and maintained to ensure consistency and completeness of the data record over time. In this technical note, we present the technical specifications of the datacube, means of access and analysis capabilities, and its use in scientific and operational applications.
- 17 November 2021
- Published by MDPI AG in Remote Sensing
- Vol. 13 (22) , 4622
Open AccessA Sentinel-1 Backscatter Datacube for Global Land Monitoring Applications
The Sentinel-1 Synthetic Aperture Radar (SAR) satellites allow global monitoring of the Earth’s land surface with unprecedented spatio-temporal coverage. Yet, implementing large-scale monitoring capabilities is a challenging task given the large volume of data from Sentinel-1 and the complex algorithms needed to convert the SAR intensity data into higher-level geophysical data products. While on-demand processing solutions have been proposed to cope with the petabyte-scale data volumes, in practice many applications require preprocessed datacubes that permit fast access to multi-year time series and image stacks. To serve near-real-time as well as offline land monitoring applications, we have created a Sentinel-1 backscatter datacube for all continents (except Antarctica) that is constantly being updated and maintained to ensure consistency and completeness of the data record over time. In this technical note, we present the technical specifications of the datacube, means of access and analysis capabilities, and its use in scientific and operational applications.
- Open Access
- 16 March 2021
- Published by MDPI AG in Remote Sensing
- Vol. 13 (6) , 1125
The openEO API–Harmonising the Use of Earth Observation Cloud Services Using Virtual Data Cube Functionalities
At present, accessing and processing Earth Observation (EO) data on different cloud platforms requires users to exercise distinct communication strategies as each backend platform is designed differently. The openEO API (Application Programming Interface) standardises EO-related contracts between local clients (R, Python, and JavaScript) and cloud service providers regarding data access and processing, simplifying their direct comparability. Independent of the providers’ data storage system, the API mimics the functionalities of a virtual EO raster data cube. This article introduces the communication strategy and aspects of the data cube model applied by the openEO API. Two test cases show the potential and current limitations of processing similar workflows on different cloud platforms and a comparison of the result of a locally running workflow and its openEO-dependent cloud equivalent. The outcomes demonstrate the flexibility of the openEO API in enabling complex scientific analysis of EO data collections on cloud platforms in a homogenised way.
- 16 March 2021
- Published by MDPI AG in Remote Sensing
- Vol. 13 (6) , 1125
Open AccessThe openEO API–Harmonising the Use of Earth Observation Cloud Services Using Virtual Data Cube Functionalities
At present, accessing and processing Earth Observation (EO) data on different cloud platforms requires users to exercise distinct communication strategies as each backend platform is designed differently. The openEO API (Application Programming Interface) standardises EO-related contracts between local clients (R, Python, and JavaScript) and cloud service providers regarding data access and processing, simplifying their direct comparability. Independent of the providers’ data storage system, the API mimics the functionalities of a virtual EO raster data cube. This article introduces the communication strategy and aspects of the data cube model applied by the openEO API. Two test cases show the potential and current limitations of processing similar workflows on different cloud platforms and a comparison of the result of a locally running workflow and its openEO-dependent cloud equivalent. The outcomes demonstrate the flexibility of the openEO API in enabling complex scientific analysis of EO data collections on cloud platforms in a homogenised way.
- Open Access
- 4 March 2021
- Published by Copernicus GmbH
Derivating forest structure from Sentinel-1 time series to assist forest fire risk assessments
The assessment of forest fire risk has recently gained interest in countries of Central Europe and the alpine region since the occurrence of forest fires is expected to increase with a changing climate. Information on forest fuel structure, which is related to forest structure, is a key component in such assessments. Forest structure information can be derived from airborne laser scanning (ALS) data, whose value for the derivation of respective metrics at a high accuracy level has been demonstrated in numerous studies over the last years.Yet, the temporal resolution of ALS data is low as flight missions are typically carried out in time intervals of five to ten years in Central Europe. ALS-derived forest structure descriptors for fire risk assessments, therefore, are often outdated. Open access earth observation data offer the potential to fill these information gaps. Data provided by synthetic aperture radar (SAR) sensors, in particular, are of interest in this context since this technology has a known sensitivity to the vegetation structure and acquires data independent of weather or daylight conditions.In our study, we investigate the potential to derive forest structure descriptors from time series of Sentinel-1 (S-1) SAR data for a deciduous forest site in the Eastern part of Austria. We focus on forest stand height and fractional cover, which is a measure for forest density, as both of these components impact forest fire propagation and ignition. The two structure metrics are estimated using a random forest (RF) model, which takes a total of 36 predictors as input, which we compute from the S-1 time series. The model is trained using ALS-derived structure metrics acquired during the same year as the S-1 data.We estimated stand height with a root mean square error (RMSE) of 4.76 m and a bias of 0.09 m at 100 m resolution, while the RMSE for the fractional cover estimation is 0.08 with a bias of zero at the same resolution. The spatial comparison of the structure predictions with the ALS reference further shows that the general structure is well reproduced. Yet, fine scale variations cannot be completely reproduced by the S1-derived structure products, and the height of tall stands and very dense canopy parts are underestimated. Due to the high correlation of the predicted values to the reference (Pearson’s R of 0.88 and 0.94 for the stand height and the fractional cover, respectively), we consider S-1 time series in combination with ALS data with low temporal resolution and machine learning techniques to be a reliable data source and workflow for regularly (e.g. < yearly) updating ALS structure information in an operational way.
- 4 March 2021
- Published by Copernicus GmbH
Open AccessDerivating forest structure from Sentinel-1 time series to assist forest fire risk assessments
The assessment of forest fire risk has recently gained interest in countries of Central Europe and the alpine region since the occurrence of forest fires is expected to increase with a changing climate. Information on forest fuel structure, which is related to forest structure, is a key component in such assessments. Forest structure information can be derived from airborne laser scanning (ALS) data, whose value for the derivation of respective metrics at a high accuracy level has been demonstrated in numerous studies over the last years.Yet, the temporal resolution of ALS data is low as flight missions are typically carried out in time intervals of five to ten years in Central Europe. ALS-derived forest structure descriptors for fire risk assessments, therefore, are often outdated. Open access earth observation data offer the potential to fill these information gaps. Data provided by synthetic aperture radar (SAR) sensors, in particular, are of interest in this context since this technology has a known sensitivity to the vegetation structure and acquires data independent of weather or daylight conditions.In our study, we investigate the potential to derive forest structure descriptors from time series of Sentinel-1 (S-1) SAR data for a deciduous forest site in the Eastern part of Austria. We focus on forest stand height and fractional cover, which is a measure for forest density, as both of these components impact forest fire propagation and ignition. The two structure metrics are estimated using a random forest (RF) model, which takes a total of 36 predictors as input, which we compute from the S-1 time series. The model is trained using ALS-derived structure metrics acquired during the same year as the S-1 data.We estimated stand height with a root mean square error (RMSE) of 4.76 m and a bias of 0.09 m at 100 m resolution, while the RMSE for the fractional cover estimation is 0.08 with a bias of zero at the same resolution. The spatial comparison of the structure predictions with the ALS reference further shows that the general structure is well reproduced. Yet, fine scale variations cannot be completely reproduced by the S1-derived structure products, and the height of tall stands and very dense canopy parts are underestimated. Due to the high correlation of the predicted values to the reference (Pearson’s R of 0.88 and 0.94 for the stand height and the fractional cover, respectively), we consider S-1 time series in combination with ALS data with low temporal resolution and machine learning techniques to be a reliable data source and workflow for regularly (e.g. < yearly) updating ALS structure information in an operational way.
- Open Access
- 22 February 2021
- Published by MDPI AG in Remote Sensing
- Vol. 13 (4) , 798
Potential of Sentinel-1 C-Band Time Series to Derive Structural Parameters of Temperate Deciduous Forests
With the increasing occurrence of forest fires in the mid-latitudes and the alpine region, fire risk assessments become important in these regions. Fuel assessments involve the collection of information on forest structure as, e.g., the stand height or the stand density. The potential of airborne laser scanning (ALS) to provide accurate forest structure information has been demonstrated in several studies. Yet, flight acquisitions at the state level are carried out in intervals of typically five to ten years in Central Europe, which often makes the information outdated. The Sentinel-1 (S-1) synthetic aperture radar mission provides freely accessible earth observation (EO) data with short revisit times of 6 days. Forest structure information derived from this data source could, therefore, be used to update the respective ALS descriptors. In our study, we investigated the potential of S-1 time series to derive stand height and fractional cover, which is a measure of the stand density, over a temperate deciduous forest in Austria. A random forest (RF) model was used for this task, which was trained using ALS-derived forest structure parameters from 2018. The comparison of the estimated mean stand height from S-1 time series with the ALS derived stand height shows a root mean square error (RMSE) of 4.76 m and a bias of 0.09 m on a 100 m cell size, while fractional cover can be retrieved with an RMSE of 0.08 and a bias of 0.0. However, the predictions reveal a tendency to underestimate stand height and fractional cover for high-growing stands and dense areas, respectively. The stratified selection of the training set, which we investigated in order to achieve a more homogeneous distribution of the metrics for training, mitigates the underestimation tendency to some degree, yet, cannot fully eliminate it. We subsequently applied the trained model to S-1 time series of 2017 and 2019, respectively. The computed difference between the predictions suggests that large decreases in the forest height structure in this two-year interval become apparent from our RF-model, while inter-annual forest growth cannot be measured. The spatial patterns of the predicted forest height, however, are similar for both years (Pearson’s R = 0.89). Therefore, we consider that S-1 time series in combination with machine learning techniques can be applied for the derivation of forest structure information in an operational way.
- 22 February 2021
- Published by MDPI AG in Remote Sensing
- Vol. 13 (4) , 798
Open AccessPotential of Sentinel-1 C-Band Time Series to Derive Structural Parameters of Temperate Deciduous Forests
With the increasing occurrence of forest fires in the mid-latitudes and the alpine region, fire risk assessments become important in these regions. Fuel assessments involve the collection of information on forest structure as, e.g., the stand height or the stand density. The potential of airborne laser scanning (ALS) to provide accurate forest structure information has been demonstrated in several studies. Yet, flight acquisitions at the state level are carried out in intervals of typically five to ten years in Central Europe, which often makes the information outdated. The Sentinel-1 (S-1) synthetic aperture radar mission provides freely accessible earth observation (EO) data with short revisit times of 6 days. Forest structure information derived from this data source could, therefore, be used to update the respective ALS descriptors. In our study, we investigated the potential of S-1 time series to derive stand height and fractional cover, which is a measure of the stand density, over a temperate deciduous forest in Austria. A random forest (RF) model was used for this task, which was trained using ALS-derived forest structure parameters from 2018. The comparison of the estimated mean stand height from S-1 time series with the ALS derived stand height shows a root mean square error (RMSE) of 4.76 m and a bias of 0.09 m on a 100 m cell size, while fractional cover can be retrieved with an RMSE of 0.08 and a bias of 0.0. However, the predictions reveal a tendency to underestimate stand height and fractional cover for high-growing stands and dense areas, respectively. The stratified selection of the training set, which we investigated in order to achieve a more homogeneous distribution of the metrics for training, mitigates the underestimation tendency to some degree, yet, cannot fully eliminate it. We subsequently applied the trained model to S-1 time series of 2017 and 2019, respectively. The computed difference between the predictions suggests that large decreases in the forest height structure in this two-year interval become apparent from our RF-model, while inter-annual forest growth cannot be measured. The spatial patterns of the predicted forest height, however, are similar for both years (Pearson’s R = 0.89). Therefore, we consider that S-1 time series in combination with machine learning techniques can be applied for the derivation of forest structure information in an operational way.