Paola Di Matteo

Accurate and sensitive antibody detection remains critical for advanced COVID-19 diagnostics and monitoring SARS-CoV-2 immunity. This study presents a highly sensitive technique for detecting anti-SARS-CoV-2 antibodies in human serum using an integrated photonic sensing platform. The platform utilizes disposable one-dimensional photonic crystal biochips engineered to sustain Bloch Surface Waves. The biochips are integrated into a custom-made optical set-up, which is capable of dual-mode detection: label-free refractometry and label-based fluorescence. Tests on human serum, including negative controls and positive samples from a recovered COVID-19 patient, confirmed the platform’s effective performance. In fluorescence mode, clear discrimination between positive and negative samples was achieved down to a 1:10⁴ serum dilution, with an optimal operating range centered around 1:10³ dilution. These results demonstrate the potential of the technique as a highly sensitive and versatile platform for antibody detection, with significant relevance for advanced COVID-19 diagnostics.

The essential amino acid tryptophan yields a plethora of secondary metabolites with key roles in plants and animals. Its fate in different living organisms is crucial for their own health, and metabolic profiling is a valuable tool for investigating it. Among the various metabolites, those retaining the indole structure were examined for qualitative and quantitative profiling. Liquid chromatography coupled with a tandem mass spectrometry detector with an electrospray ionization source (HPLC-ESI-MS/MS), acquiring in multiple reaction monitoring (MRM) mode, was used to develop a selective and sensitive method for the simultaneous analysis of tryptophan and 10 indole structure-retaining metabolites of it. Satisfactory values were obtained for linearity (R² ≥ 0.99 for all compounds except two), sensitivity (LOD, within 6–31 ng/mL, and LOQ, within 17–94 ng/mL, where minimum and maximum values were relative to serotonin and 5-methoxytryptamin, respectively), reproducibility (interday and intraday precision and accuracy), and effect of the matrix (recovery and matrix effect). The method was then successfully applied to the analysis of different types of beverage, such as herbal products, like Eschscholzia californica and a sleep herbal tea marketed with added melatonin (consumed to reduce anxiety and improve sleep quality), and fermented beverages, like beer and kefir. High amounts of tryptophan (from 77 ng/mL in kefir to 26,974 ng/g in the sleep herbal tea) followed by lower contents of serotonin (from 29 ng/mL in kefir to 2207 ng/g in the sleep herbal tea), were found in all samples along with the serotonin pathway-related compounds 5-hydroxytryptophan and tryptamine. Melatonin was detected in the plant matrix Eschscholzia c. for the first time to our knowledge (446 ng/g) and in the fermented beverages (96 ng/mL in beer and 39 ng/mL in kefir), regardless of their vegetable or animal origin, along with the melatonin route metabolites 5-methoxytryptamine and tryptophan ethyl ester. The amount of melatonin in the sleep herbal tea (556,464 ng/g) was in strong agreement with the declared content. Suggested applications include the search for biomarkers in phytochemical characterization, mechanistic studies of tryptophan’s chemistry, valorization of foods, beverages, and tryptophan-rich agro-food by-products and waste for nutraceutical and pharmacological purposes.

The interest in the quality control of the raw materials, intermediates, and final products, as well as production methods, of beer has increased significantly in recent decades due to the needs and expectations of consumers. Increasing in the industrialization and globalization of beer supply chains led to a need for novel analytical tools suitable for the rapid and reliable characterization of the materials involved. In this study, an ultracompact instrument operating in the NIR region of the spectrum, microNIR, was tested for the chemical investigation of barley malts. The essential raw materials for brewing require careful control since they deeply affect the characteristic flavor and taste of the final products. Therefore, a robust prediction model able to classify base and specialty barley malts was developed starting from NIR measurements. Soft Independent Class Analogy (SIMCA) was selected as the chemometric technique for the optimization of two prediction models, and ground and sieved materials were investigated using spectroscopy. The microNIR/chemometric approach proposed in this study permitted the correct prediction of the malt samples included in the external validation set, providing false positive and false negative rates no higher than 3.41% and 0.25%, respectively, and confirming the feasibility of the novel analytical platform.

A simple sensor for the quantitation of tryptophan (Trp) has been developed using a glassy carbon electrode (GCE) modified with electro-synthesized carbon dots functionalized with glycine (Gly@CDs). The surface functionalization with an amino acid led to the formation of large clusters of nanostructures. To our knowledge, this is the first study in which a Gly@CDs clusters modified GCE is used for the analysis of Trp. Cyclic voltammetry (CV) and differential pulse voltammetry (DPV) are the techniques used to study Trp electrochemical behavior in an alkaline solution using such an electrode. A linear concentration range was found for Trp from 5 × 10⁻⁶ to 5 × 10⁻³ mol L⁻¹ with a detection limit (LOD) of 5 × 10⁻⁶ mol L⁻¹. The reproducibility and repeatability data were satisfactory in terms of RSD%. Moreover, the stability during the time of the modified electrode was considered, evidencing interesting results. The described sensor was used for the determination of Trp in herbal tea and a dietary supplement, and the results were compared with those obtained with HPLC-ESI-MS in the Selected Ion Recording (SIR) mode as an independent method. The electrochemical sensor presents significant advantages in terms of low cost, portability, ease of handling and not requiring skilled personnel.

Chirality has a crucial effect on clinical, chemical and biological research since most bioactive compounds are chiral in the natural world. It is thus important to evaluate the enantiomeric ratio (or the enantiopurity) of the selected chiral analytes. To this purpose, fluorescence and electrochemical sensors, in which a chiral modifier is present, are reported in the literature. In this review, fluorescence and electrochemical sensors for enantiorecognition, in which chiral carbon dots (CDs) are used, are reported. Chiral CDs are a novel zero-dimensional carbon-based nanomaterial with a graphitic or amorphous carbon core and a chiral surface. They are nanoparticles with a high surface-to-volume ratio and good conductivity. Moreover, they have the advantages of good biocompatibility, multi-color emission, good conductivity and easy surface functionalization. Their exploitation in enantioselective sensing is the object of this review, in which several examples of fluorescent and electrochemical sensors, containing chiral CDs, are analyzed and discussed. A brief introduction to the most common synthetic procedures of chiral CDs is also reported, evidencing strengths and weaknesses. Finally, consideration concerning the potential challenges and future opportunities for the application of chiral CDs to the enantioselective sensing world are outlined.

In this work, phytochemical analysis on different extracts of Roccella tinctoria DC. was reported using different techniques with respect to the past. Twenty volatile and three non-volatile compounds were identified, some of which were found in this species for the first time. The methanolic extracts and their non-volatile components were then evaluated for their antitumor effects in cancerous A549 and Mz-ChA-1 cells and for their tolerability in non-cancerous BEAS-2B and H69 cells, showing IC₅₀ values from 94.6 µg/mL to 416.4 µg/mL, in general. The same extracts and compounds were also tested for their antifungal effects in Candida albicans, with only compound 2 being active, with an MIC₅₀ value of 87 µg/mL. In addition, they were tested for their anti-Candida adhesion activity, anti-Candida biofilm formation, and anti-Candida mature biofilm inhibition, with efficacy percentages generally above 50% but not for all of them. Lastly, the DF3 extract and compounds 1–2 were tested in vivo according to the Galleria mellonella survival assay, showing positive mortality rates above 50% at different concentrations. All these biological assays were conducted on this species for the first time. Comparisons with other lichens and compounds were also presented and discussed.

Two-dimensional (2D) nanomaterials (e.g., graphene) have attracted growing attention in the (bio)sensing area and, in particular, for biomedical applications because of their unique mechanical and physicochemical properties, such as their high thermal and electrical conductivity, biocompatibility, and large surface area. Graphene (G) and its derivatives represent the most common 2D nanomaterials applied to electrochemical (bio)sensors for healthcare applications. This review will pay particular attention to other 2D nanomaterials, such as transition metal dichalcogenides (TMDs), metal–organic frameworks (MOFs), covalent organic frameworks (COFs), and MXenes, applied to the electrochemical biomedical (bio)sensing area, considering the literature of the last five years (2018–2022). An overview of 2D nanostructures focusing on the synthetic approach, the integration with electrodic materials, including other nanomaterials, and with different biorecognition elements such as antibodies, nucleic acids, enzymes, and aptamers, will be provided. Next, significant examples of applications in the clinical field will be reported and discussed together with the role of nanomaterials, the type of (bio)sensor, and the adopted electrochemical technique. Finally, challenges related to future developments of these nanomaterials to design portable sensing systems will be shortly discussed.