Manh Duc Nguyen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Manh Duc Nguyen has a total of 34 co-authors. Here are the top co-authors by number of shared publications:
- Binh Thai Pham
Intelligent Geosystems and Infrastructure Research Group, University of Transport Technology, Hanoi, Vietnam
6 shared publications - Hiep Van Le
University of Transport Technology, 54 Trieu Khuc, Thanh Xuan, Hanoi, Viet Nam
5 shared publications - Indra Prakash
Geological Survey of India
5 shared publications - Nadhir Al-Ansari
Luleå University of Technology, Luleå, Sweden
3 shared publications - An Ho Sy
University of Transport and Communications
2 shared publications - Dam Duc Nguyen
University of Transport Technology, Ha Noi, Vietnam
2 shared publications
Latest Publications
- Open Access
- 8 January 2025
- Published by Publishing House for Science and Technology, Vietnam Academy of Science and Technology (Publications) in VIETNAM JOURNAL OF EARTH SCIENCES
- p. 197-215
Prediction of safety factor for slope stability using machine learning models
Slope instability is a common geological hazard along mountainous roads in Vietnam, leading to significant damage to infrastructure, traffic disruptions, and loss of life. Predicting slope stability, typically quantified by the Factor of Safety (FS), is challenging due to the complex interactions between geotechnical, topographical, and environmental factors. This study aims to develop efficient and accurate models for predicting the FS of natural slopes using advanced machine learning techniques, including Gradient Boosting (GB), Support Vector Machine (SVM), Multi-layer Perceptron (MLP) Neural Networks, Random Forest (RF), and AdaBoost (AB). 371 slope stability cases were used to create a comprehensive database for model training. Both geotechnical and topographical parameters were considered in the FS prediction process. The performance and reliability of these models were evaluated using standard metrics such as R², MAE, and MSE. The results demonstrated that all models exhibited satisfactory prediction capabilities, with the optimized GB model achieving the highest accuracy (R² = 0.975, MAE = 0.079, and RMSE = 0.120). Additionally, SHAP analysis was employed to assess the importance of input variables in predicting the FS. The findings revealed that slope ratio (X1), slope height (X2), and the number of steeps (X3) were the most influential parameters in the FS prediction.
- 8 January 2025
- Published by Publishing House for Science and Technology, Vietnam Academy of Science and Technology (Publications) in VIETNAM JOURNAL OF EARTH SCIENCES
- p. 197-215
Open AccessPrediction of safety factor for slope stability using machine learning models
Slope instability is a common geological hazard along mountainous roads in Vietnam, leading to significant damage to infrastructure, traffic disruptions, and loss of life. Predicting slope stability, typically quantified by the Factor of Safety (FS), is challenging due to the complex interactions between geotechnical, topographical, and environmental factors. This study aims to develop efficient and accurate models for predicting the FS of natural slopes using advanced machine learning techniques, including Gradient Boosting (GB), Support Vector Machine (SVM), Multi-layer Perceptron (MLP) Neural Networks, Random Forest (RF), and AdaBoost (AB). 371 slope stability cases were used to create a comprehensive database for model training. Both geotechnical and topographical parameters were considered in the FS prediction process. The performance and reliability of these models were evaluated using standard metrics such as R², MAE, and MSE. The results demonstrated that all models exhibited satisfactory prediction capabilities, with the optimized GB model achieving the highest accuracy (R² = 0.975, MAE = 0.079, and RMSE = 0.120). Additionally, SHAP analysis was employed to assess the importance of input variables in predicting the FS. The findings revealed that slope ratio (X1), slope height (X2), and the number of steeps (X3) were the most influential parameters in the FS prediction.
- 3 December 2024
- Published by Springer Nature in Journal of the Indian Society of Remote Sensing
- Vol. 53 (5) , 1647-1666
Enhanced Landslide Spatial Prediction Using Hybrid Deep Learning Model and SHAP Analysis: A Case Study of the Tuyen Quang-Ha Giang Expressway, Vietnam
- 3 December 2024
- Published by Springer Nature in Journal of the Indian Society of Remote Sensing
- Vol. 53 (5) , 1647-1666
Enhanced Landslide Spatial Prediction Using Hybrid Deep Learning Model and SHAP Analysis: A Case Study of the Tuyen Quang-Ha Giang Expressway, Vietnam
- 11 July 2024
- Published by Springer Nature
- p. 1607-1618
Mechanism of Large-Scale Landslide Development and Remedial Methods—A Case Study in Vietnam
- 11 July 2024
- Published by Springer Nature
- p. 1607-1618
Mechanism of Large-Scale Landslide Development and Remedial Methods—A Case Study in Vietnam
- 10 October 2022
- Published by Springer Nature in Bulletin of Engineering Geology and the Environment
- Vol. 81 (11) , 1-17
Novel approach for soil classification using machine learning methods
- 10 October 2022
- Published by Springer Nature in Bulletin of Engineering Geology and the Environment
- Vol. 81 (11) , 1-17
Novel approach for soil classification using machine learning methods
- Open Access
- 19 November 2021
- Published by Wiley in Mathematical Problems in Engineering
- Vol. 2021, 1-11
A Comparative Study of Soft Computing Models for Prediction of Permeability Coefficient of Soil
Determination of the permeability coefficient (K) of soil is considered as one of the essential steps to assess infiltration, runoff, groundwater, and drainage in the design process of the construction projects. In this study, three cost-effective algorithms, namely, artificial neural network (ANN), support vector machine (SVM), and random forest (RF), which are well-known as advanced machine learning techniques, were used to predict the permeability coefficient (K) of soil (10−9 cm/s), based on a set of simple six input parameters such as natural water content (%), void ratio (e), specific density (g/cm3), liquid limit (LL) (%), plastic limit (PL) (%), and clay content (%). For this, a total of 84 soil samples data collected from the detailed design stage investigations of Da Nang-Quang Ngai national road project in Vietnam was used to generate training (70%) and testing (30%) datasets for building and validating the models. Statistical error indicators such as RMSE and MAE and correlation coefficient (R) were used to evaluate and compare performance of the models. The results show that all the three models performed well (R > 0.8) for the prediction of permeability coefficient of soil, but the RF model (RMSE = 0.0084, MAE = 0.0049, and R = 0.851) is more efficient compared with the other two models, namely, ANN (RMSE = 0.001, MAE = 0.005, and R = 0.845) and SVM (RMSE = 0.0098, MAE = 0.0064, and R = 0.844). Thus, it can be concluded that the RF model can be used for accurate estimation of the permeability coefficient (K) of the soil.
- 19 November 2021
- Published by Wiley in Mathematical Problems in Engineering
- Vol. 2021, 1-11
Open AccessA Comparative Study of Soft Computing Models for Prediction of Permeability Coefficient of Soil
Determination of the permeability coefficient (K) of soil is considered as one of the essential steps to assess infiltration, runoff, groundwater, and drainage in the design process of the construction projects. In this study, three cost-effective algorithms, namely, artificial neural network (ANN), support vector machine (SVM), and random forest (RF), which are well-known as advanced machine learning techniques, were used to predict the permeability coefficient (K) of soil (10−9 cm/s), based on a set of simple six input parameters such as natural water content (%), void ratio (e), specific density (g/cm3), liquid limit (LL) (%), plastic limit (PL) (%), and clay content (%). For this, a total of 84 soil samples data collected from the detailed design stage investigations of Da Nang-Quang Ngai national road project in Vietnam was used to generate training (70%) and testing (30%) datasets for building and validating the models. Statistical error indicators such as RMSE and MAE and correlation coefficient (R) were used to evaluate and compare performance of the models. The results show that all the three models performed well (R > 0.8) for the prediction of permeability coefficient of soil, but the RF model (RMSE = 0.0084, MAE = 0.0049, and R = 0.851) is more efficient compared with the other two models, namely, ANN (RMSE = 0.001, MAE = 0.005, and R = 0.845) and SVM (RMSE = 0.0098, MAE = 0.0064, and R = 0.844). Thus, it can be concluded that the RF model can be used for accurate estimation of the permeability coefficient (K) of the soil.
- 1 June 2021
- Published by Fuji Technology Press Ltd. in Journal of Disaster Research
- Vol. 16 (4) , 501-511
Identification, Monitoring, and Assessment of an Active Landslide in Tavan-Hauthao, Sapa, Laocai, Vietnam – A Multidisciplinary Approach
The active landslide located in the Tavan-Hauthao, Sapa district, Laocai province, Vietnam was investigated using geophysical methods (2D Electrical Resistivity and Tomography), geotechnical investigations, and a ground survey to assess the geologic condition of the sliding block and surrounding ground. Landslide displacement was measured using 15 surface monitoring points. Numerical modeling was done to assess the behavior of an active landslide. This multi-disciplinary approach helped in interpreting landslide stratigraphy, geotechnical characteristics of the sliding groundmass, depth, and nature of the sliding plane. The surface area of the slide is approximately 1200 m2. Studying this active landslide is important as it affects the road No. 152, which is an important road connecting the Sapa Ancient Rock Field. This study involved surface topographical survey, surface and sub-surface geological, and geotechnical investigations including Standard Penetration Test and Electrical Resistivity Tomography. Geologic and geotechnical data were used to characterize an active landslide block, which is composed of different soil layers underlaid by granitic rock. The surface electrical-resistivity measurements across the Sapa landslide resulted in inverted-resistivity sections with distinct resistivity contrasts that correlated well with the geology and geo-hydrology observed in boreholes.
- 1 June 2021
- Published by Fuji Technology Press Ltd. in Journal of Disaster Research
- Vol. 16 (4) , 501-511
Identification, Monitoring, and Assessment of an Active Landslide in Tavan-Hauthao, Sapa, Laocai, Vietnam – A Multidisciplinary Approach
The active landslide located in the Tavan-Hauthao, Sapa district, Laocai province, Vietnam was investigated using geophysical methods (2D Electrical Resistivity and Tomography), geotechnical investigations, and a ground survey to assess the geologic condition of the sliding block and surrounding ground. Landslide displacement was measured using 15 surface monitoring points. Numerical modeling was done to assess the behavior of an active landslide. This multi-disciplinary approach helped in interpreting landslide stratigraphy, geotechnical characteristics of the sliding groundmass, depth, and nature of the sliding plane. The surface area of the slide is approximately 1200 m2. Studying this active landslide is important as it affects the road No. 152, which is an important road connecting the Sapa Ancient Rock Field. This study involved surface topographical survey, surface and sub-surface geological, and geotechnical investigations including Standard Penetration Test and Electrical Resistivity Tomography. Geologic and geotechnical data were used to characterize an active landslide block, which is composed of different soil layers underlaid by granitic rock. The surface electrical-resistivity measurements across the Sapa landslide resulted in inverted-resistivity sections with distinct resistivity contrasts that correlated well with the geology and geo-hydrology observed in boreholes.
- Open Access
- 17 March 2020
- Published by MDPI AG in Sustainability
- Vol. 12 (6) , 2339
Extreme Learning Machine Based Prediction of Soil Shear Strength: A Sensitivity Analysis Using Monte Carlo Simulations and Feature Backward Elimination
Machine Learning (ML) has been applied widely in solving a lot of real-world problems. However, this approach is very sensitive to the selection of input variables for modeling and simulation. In this study, the main objective is to analyze the sensitivity of an advanced ML method, namely the Extreme Learning Machine (ELM) algorithm under different feature selection scenarios for prediction of shear strength of soil. Feature backward elimination supported by Monte Carlo simulations was applied to evaluate the importance of factors used for the modeling. A database constructed from 538 samples collected from Long Phu 1 power plant project was used for analysis. Well-known statistical indicators, such as the correlation coefficient (R), root mean squared error (RMSE), and mean absolute error (MAE), were utilized to evaluate the performance of the ELM algorithm. In each elimination step, the majority vote based on six elimination indicators was selected to decide the variable to be excluded. A number of 30,000 simulations were conducted to find out the most relevant variables in predicting the shear strength of soil using ELM. The results show that the performance of ELM is good but very different under different combinations of input factors. The moisture content, liquid limit, and plastic limit were found as the most critical variables for the prediction of shear strength of soil using the ML model.
- 17 March 2020
- Published by MDPI AG in Sustainability
- Vol. 12 (6) , 2339
Open AccessExtreme Learning Machine Based Prediction of Soil Shear Strength: A Sensitivity Analysis Using Monte Carlo Simulations and Feature Backward Elimination
Machine Learning (ML) has been applied widely in solving a lot of real-world problems. However, this approach is very sensitive to the selection of input variables for modeling and simulation. In this study, the main objective is to analyze the sensitivity of an advanced ML method, namely the Extreme Learning Machine (ELM) algorithm under different feature selection scenarios for prediction of shear strength of soil. Feature backward elimination supported by Monte Carlo simulations was applied to evaluate the importance of factors used for the modeling. A database constructed from 538 samples collected from Long Phu 1 power plant project was used for analysis. Well-known statistical indicators, such as the correlation coefficient (R), root mean squared error (RMSE), and mean absolute error (MAE), were utilized to evaluate the performance of the ELM algorithm. In each elimination step, the majority vote based on six elimination indicators was selected to decide the variable to be excluded. A number of 30,000 simulations were conducted to find out the most relevant variables in predicting the shear strength of soil using ELM. The results show that the performance of ELM is good but very different under different combinations of input factors. The moisture content, liquid limit, and plastic limit were found as the most critical variables for the prediction of shear strength of soil using the ML model.
- Top Cited PapersOpen Access
- 12 March 2020
- Published by MDPI AG in Sustainability
- Vol. 12 (6) , 2218
A Novel Hybrid Soft Computing Model Using Random Forest and Particle Swarm Optimization for Estimation of Undrained Shear Strength of Soil
Determination of shear strength of soil is very important in civil engineering for foundation design, earth and rock fill dam design, highway and airfield design, stability of slopes and cuts, and in the design of coastal structures. In this study, a novel hybrid soft computing model (RF-PSO) of random forest (RF) and particle swarm optimization (PSO) was developed and used to estimate the undrained shear strength of soil based on the clay content (%), moisture content (%), specific gravity (%), void ratio (%), liquid limit (%), and plastic limit (%). In this study, the experimental results of 127 soil samples from national highway project Hai Phong-Thai Binh of Vietnam were used to generate datasets for training and validating models. Pearson correlation coefficient (R) method was used to evaluate and compare performance of the proposed model with single RF model. The results show that the proposed hybrid model (RF-PSO) achieved a high accuracy performance (R = 0.89) in the prediction of shear strength of soil. Validation of the models also indicated that RF-PSO model (R = 0.89 and Root Mean Square Error (RMSE) = 0.453) is superior to the single RF model without optimization (R = 0.87 and RMSE = 0.48). Thus, the proposed hybrid model (RF-PSO) can be used for accurate estimation of shear strength which can be used for the suitable designing of civil engineering structures.
- 12 March 2020
- Published by MDPI AG in Sustainability
- Vol. 12 (6) , 2218
Top Cited PapersOpen AccessA Novel Hybrid Soft Computing Model Using Random Forest and Particle Swarm Optimization for Estimation of Undrained Shear Strength of Soil
Determination of shear strength of soil is very important in civil engineering for foundation design, earth and rock fill dam design, highway and airfield design, stability of slopes and cuts, and in the design of coastal structures. In this study, a novel hybrid soft computing model (RF-PSO) of random forest (RF) and particle swarm optimization (PSO) was developed and used to estimate the undrained shear strength of soil based on the clay content (%), moisture content (%), specific gravity (%), void ratio (%), liquid limit (%), and plastic limit (%). In this study, the experimental results of 127 soil samples from national highway project Hai Phong-Thai Binh of Vietnam were used to generate datasets for training and validating models. Pearson correlation coefficient (R) method was used to evaluate and compare performance of the proposed model with single RF model. The results show that the proposed hybrid model (RF-PSO) achieved a high accuracy performance (R = 0.89) in the prediction of shear strength of soil. Validation of the models also indicated that RF-PSO model (R = 0.89 and Root Mean Square Error (RMSE) = 0.453) is superior to the single RF model without optimization (R = 0.87 and RMSE = 0.48). Thus, the proposed hybrid model (RF-PSO) can be used for accurate estimation of shear strength which can be used for the suitable designing of civil engineering structures.