Pranee Chumsamrong
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Pranee Chumsamrong has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
- Yupaporn Ruksakulpiwat
School of Polymer Engineering, Institute of Engineering, Suranaree University of Technology, Nakhon Ratchasima 30000, Thailand
4 shared publications Wachirabhorn Pongputthipat
School of Polymer Engineering, Institute of Engineering, Suranaree University of Technology, Nakhon Ratchasima, Thailand
3 shared publications- Chaiwat Ruksakulpiwat
School of Polymer Engineering, Institute of Engineering, Suranaree University of Technology, Nakhon Ratchasima 30000, Thailand
2 shared publications - Kasama Jarukumjorn
School of Polymer Engineering, Institute of Engineering, Suranaree University of Technology, Nakhon Ratchasima 30000, Thailand
2 shared publications - Supharat Inphonlek
School of Polymer Engineering, Institute of Engineering, Suranaree University of Technology, Nakhon Ratchasima 30000, Thailand
2 shared publications Yupaporn Ruksakulpiwat
School of Polymer Engineering, Institute of Engineering, Suranaree University of Technology, Nakhon Ratchasima, Thailand
2 shared publications
Latest Publications
- 10 December 2025
- Published by Springer Nature in Polymer Bulletin
- Vol. 83 (2) , 52
Biodegradable mulch films from poly(lactic acid)/natural rubber/agro-waste biocomposites for sustainable agricultural applications
- 10 December 2025
- Published by Springer Nature in Polymer Bulletin
- Vol. 83 (2) , 52
Biodegradable mulch films from poly(lactic acid)/natural rubber/agro-waste biocomposites for sustainable agricultural applications
- 2 December 2025
- Published by Wiley in Polymer Composites
- Vol. 47 (9) , 8380-8391
Remarkable Cassava Rhizome Powders as Bio‐Reinforcing Filler in Wood Thermoset Composites
The use of agricultural waste provides significant environmental benefits. This study utilized cassava rhizomes, an agricultural byproduct from Chaiyaphum, Thailand, as a bio‐reinforcing filler in epoxy‐based wood composites. The effects of particle size and filler content (0%, 10%, 20%, and 30% by weight) on physical and mechanical properties were investigated. Composite samples were fabricated using silicone molds with three particle sizes of cassava rhizome powder. Results showed that powder size and content significantly influenced composite performance. At 30 wt% of the smallest particles, Young's modulus reached 1.67 GPa (an increase of 138.6%), hardness was 76.2 Shore D (an increase of 39.3%), flexural strength was 43.5 MPa (an increase of 18.8%), and flexural modulus was 2.38 GPa (an increase of 55.6%) compared to pristine epoxy, due to enhanced stiffness. Water absorption increased to 4.04% (a factor of 7.5), and bulk density rose to 1.18 g/cm 3 (an increase of 3.5%) owing to the hydrophilic nature and density of cassava rhizomes. These findings demonstrate the potential of cassava rhizome powders as sustainable bio‐fillers for developing eco‐friendly wood‐epoxy composites with applications in furniture, ceilings, flooring, and wall panels.
- 2 December 2025
- Published by Wiley in Polymer Composites
- Vol. 47 (9) , 8380-8391
Remarkable Cassava Rhizome Powders as Bio‐Reinforcing Filler in Wood Thermoset Composites
The use of agricultural waste provides significant environmental benefits. This study utilized cassava rhizomes, an agricultural byproduct from Chaiyaphum, Thailand, as a bio‐reinforcing filler in epoxy‐based wood composites. The effects of particle size and filler content (0%, 10%, 20%, and 30% by weight) on physical and mechanical properties were investigated. Composite samples were fabricated using silicone molds with three particle sizes of cassava rhizome powder. Results showed that powder size and content significantly influenced composite performance. At 30 wt% of the smallest particles, Young's modulus reached 1.67 GPa (an increase of 138.6%), hardness was 76.2 Shore D (an increase of 39.3%), flexural strength was 43.5 MPa (an increase of 18.8%), and flexural modulus was 2.38 GPa (an increase of 55.6%) compared to pristine epoxy, due to enhanced stiffness. Water absorption increased to 4.04% (a factor of 7.5), and bulk density rose to 1.18 g/cm 3 (an increase of 3.5%) owing to the hydrophilic nature and density of cassava rhizomes. These findings demonstrate the potential of cassava rhizome powders as sustainable bio‐fillers for developing eco‐friendly wood‐epoxy composites with applications in furniture, ceilings, flooring, and wall panels.
- 15 March 2024
- Published by Springer Nature in Polymer Bulletin
- Vol. 81 (12) , 10729-10746
Soil burial degradation of bio-composite films from poly(lactic acid), natural rubber, and rice straw
- 15 March 2024
- Published by Springer Nature in Polymer Bulletin
- Vol. 81 (12) , 10729-10746
Soil burial degradation of bio-composite films from poly(lactic acid), natural rubber, and rice straw
- Open Access
Preparation of Crosslinked Poly(acrylic acid-co-acrylamide)-Grafted Deproteinized Natural Rubber/Silica Composites as Coating Materials for Controlled Release of Fertilizer
The crosslinked poly(acrylic acid-co-acrylamide)-grafted deproteinized natural rubber/silica ((PAA-co-PAM)-DPNR/silica) composites were prepared and applied as coating materials for fertilizer in this work. The crosslinked (PAA-co-PAM)-DPNR was prepared via emulsion graft copolymerization in the presence of MBA as a crosslinking agent. The modified DPNR was mixed with various contents of silica (10 to 30 phr) to form the composites. The existence of crosslinked (PAA-co-PAM) after modification provided a water adsorption ability to DPNR. The swelling degree values of composites were found in the range of 2217.3 ± 182.0 to 8132.3 ± 483.8%. The addition of silica in the composites resulted in an improvement in mechanical properties. The crosslinked (PAA-co-PAM)-DPNR with 20 phr of silica increased its compressive strength and compressive modulus by 1.61 and 1.55 times compared to the unloaded silica sample, respectively. There was no breakage of samples after 80% compression strain. Potassium nitrate, a model fertilizer, was loaded into chitosan beads with a loading percentage of 40.55 ± 1.03% and then coated with the modified natural rubber/silica composites. The crosslinked (PAA-co-PAM)-DPNR/silica composites as the outer layers had the ability of holding water in their structure and retarded the release of fertilizer. These composites could be promising materials for controlled release and water retention that would have potential for agricultural application.
Open AccessPreparation of Crosslinked Poly(acrylic acid-co-acrylamide)-Grafted Deproteinized Natural Rubber/Silica Composites as Coating Materials for Controlled Release of Fertilizer
The crosslinked poly(acrylic acid-co-acrylamide)-grafted deproteinized natural rubber/silica ((PAA-co-PAM)-DPNR/silica) composites were prepared and applied as coating materials for fertilizer in this work. The crosslinked (PAA-co-PAM)-DPNR was prepared via emulsion graft copolymerization in the presence of MBA as a crosslinking agent. The modified DPNR was mixed with various contents of silica (10 to 30 phr) to form the composites. The existence of crosslinked (PAA-co-PAM) after modification provided a water adsorption ability to DPNR. The swelling degree values of composites were found in the range of 2217.3 ± 182.0 to 8132.3 ± 483.8%. The addition of silica in the composites resulted in an improvement in mechanical properties. The crosslinked (PAA-co-PAM)-DPNR with 20 phr of silica increased its compressive strength and compressive modulus by 1.61 and 1.55 times compared to the unloaded silica sample, respectively. There was no breakage of samples after 80% compression strain. Potassium nitrate, a model fertilizer, was loaded into chitosan beads with a loading percentage of 40.55 ± 1.03% and then coated with the modified natural rubber/silica composites. The crosslinked (PAA-co-PAM)-DPNR/silica composites as the outer layers had the ability of holding water in their structure and retarded the release of fertilizer. These composites could be promising materials for controlled release and water retention that would have potential for agricultural application.
- 12 November 2022
- Published by Springer Nature in Polymer Bulletin
- Vol. 80 (9) , 10289-10307
Development of biodegradable biocomposite films from poly(lactic acid), natural rubber and rice straw
- 12 November 2022
- Published by Springer Nature in Polymer Bulletin
- Vol. 80 (9) , 10289-10307
Development of biodegradable biocomposite films from poly(lactic acid), natural rubber and rice straw
- Open Access
Preparation of Poly(acrylic acid-co-acrylamide)-Grafted Deproteinized Natural Rubber and Its Effect on the Properties of Natural Rubber/Silica Composites
This work aims to enhance the polarity of natural rubber by grafting copolymers onto deproteinized natural rubber (DPNR) to improve its compatibility with silica. Poly(acrylic acid-co-acrylamide)-grafted DPNR ((PAA-co-PAM)-DPNR) was successfully prepared by graft copolymerization with acrylic acid and acrylamide in the latex stage, as confirmed by FTIR. The optimum conditions to obtain the highest conversion, grafting efficiency, and grafting percentage were a reaction time of 360 min, a reaction temperature of 50 °C, and an initiator concentration of 1.0 phr. The monomer conversion, grafting efficiency, and grafting percentage were 91.9–94.1, 20.8–38.9, and 2.1–9.9%, respectively, depending on the monomer content. It was shown that the polarity of the natural rubber increased after grafting. The (PAA-co-PAM)-DPNR was then mixed with silica to prepare DPNR/silica composites. The presence of the (PAA-co-PAM)-DPNR and silica in the composites was found to improve the mechanical properties of the DPNR. The incorporation of 10 phr of silica into the (PAA-co-PAM)-DPNR with 10 phr monomer increased its tensile strength by 1.55 times when compared to 10 phr of silica loaded into the DPNR. The silica-filled (PAA-co-PAM)-DPNR provided s higher storage modulus, higher Tg, and a lower tan δ peak, indicating stronger modified DPNR/silica interactions and greater thermal stability when compared to silica-filled DPNR.
Open AccessPreparation of Poly(acrylic acid-co-acrylamide)-Grafted Deproteinized Natural Rubber and Its Effect on the Properties of Natural Rubber/Silica Composites
This work aims to enhance the polarity of natural rubber by grafting copolymers onto deproteinized natural rubber (DPNR) to improve its compatibility with silica. Poly(acrylic acid-co-acrylamide)-grafted DPNR ((PAA-co-PAM)-DPNR) was successfully prepared by graft copolymerization with acrylic acid and acrylamide in the latex stage, as confirmed by FTIR. The optimum conditions to obtain the highest conversion, grafting efficiency, and grafting percentage were a reaction time of 360 min, a reaction temperature of 50 °C, and an initiator concentration of 1.0 phr. The monomer conversion, grafting efficiency, and grafting percentage were 91.9–94.1, 20.8–38.9, and 2.1–9.9%, respectively, depending on the monomer content. It was shown that the polarity of the natural rubber increased after grafting. The (PAA-co-PAM)-DPNR was then mixed with silica to prepare DPNR/silica composites. The presence of the (PAA-co-PAM)-DPNR and silica in the composites was found to improve the mechanical properties of the DPNR. The incorporation of 10 phr of silica into the (PAA-co-PAM)-DPNR with 10 phr monomer increased its tensile strength by 1.55 times when compared to 10 phr of silica loaded into the DPNR. The silica-filled (PAA-co-PAM)-DPNR provided s higher storage modulus, higher Tg, and a lower tan δ peak, indicating stronger modified DPNR/silica interactions and greater thermal stability when compared to silica-filled DPNR.
- 10 March 2020
- Published by Springer Nature in Polymer Bulletin
- Vol. 78 (3) , 1253-1273
Effect of triblock copolymers based on liquid natural rubber and low molecular weight poly(lactic acid) on physical properties of poly(lactic acid)/natural rubber blend
- 10 March 2020
- Published by Springer Nature in Polymer Bulletin
- Vol. 78 (3) , 1253-1273
Effect of triblock copolymers based on liquid natural rubber and low molecular weight poly(lactic acid) on physical properties of poly(lactic acid)/natural rubber blend