Xu Huang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Xu Huang has a total of 43 co-authors. Here are the top co-authors by number of shared publications:
- Wei Fan
Research Institute of Hunan University in Chongqing
5 shared publications Oh-Sung Kwon
4 shared publications- Oh-Sung Kwon
University of Toronto
4 shared publications Bin Liu
Postdoctoral Fellow, Key Laboratory for Wind and Bridge Engineering of Hunan Province, College of Civil Engineering, Hunan Univ., Changsha 410082, China; Engineer, Hualan Design & Consulting Group, Nanning 530011, China
3 shared publications- Evan C. Bentz
Department of Civil and Mineral Engineering, University of Toronto, Toronto, Canada
3 shared publications Julia Tcherner
Candu Energy, Inc. a member of SNC Lavalin Group, Canada
3 shared publications
Latest Publications
- Open Access
- 17 November 2026
- Published by Springer Nature
- p. 791-804
Design and Implementation Challenges of Geographically Distributed Hybrid Testing at European Level
- 17 November 2026
- Published by Springer Nature
- p. 791-804
Open AccessDesign and Implementation Challenges of Geographically Distributed Hybrid Testing at European Level
- 17 June 2022
- Published by Wiley in Earthquake Engineering & Structural Dynamics
- Vol. 51 (12) , 2813-2836
Impact of loading rate during hybrid simulation on seismic response of steel structures
This study investigates the influence of loading rates on the seismic response of steel structures. A series of coupon tests under typical earthquake‐induced loading rates are carried out. In addition to the conventional monotonic tension test, the specimens are also tested under a discontinuous loading protocol that is analogous to the ramp‐and‐hold scheme employed in the pseudo‐dynamic hybrid simulations. The test results are used to develop a uniaxial steel material model to account for the strain rate effect and stress relaxation. The material model facilitates the reuse of existing steel hysteresis models and can be used to model different structural components, such as columns, beams, braces, etc. The material model is then used for a parametric study to evaluate the impact of various loading rates on the global seismic response of a single degree of freedom structural system with different structural periods, and types and intensities of ground motions. It is found that the impact of loading rates is more significant for structures with a period of 0.5 s or less and it thus requires a fast control of the physical specimen in pseudo‐dynamic hybrid testing. In addition, the material model is applied to a five‐storey buckling restrained braced frame (BRBF) building with a structural period of 1.2 s. It is found that the earthquake‐induced loading rates have a minor impact on the global response of the structure.
- 17 June 2022
- Published by Wiley in Earthquake Engineering & Structural Dynamics
- Vol. 51 (12) , 2813-2836
Impact of loading rate during hybrid simulation on seismic response of steel structures
This study investigates the influence of loading rates on the seismic response of steel structures. A series of coupon tests under typical earthquake‐induced loading rates are carried out. In addition to the conventional monotonic tension test, the specimens are also tested under a discontinuous loading protocol that is analogous to the ramp‐and‐hold scheme employed in the pseudo‐dynamic hybrid simulations. The test results are used to develop a uniaxial steel material model to account for the strain rate effect and stress relaxation. The material model facilitates the reuse of existing steel hysteresis models and can be used to model different structural components, such as columns, beams, braces, etc. The material model is then used for a parametric study to evaluate the impact of various loading rates on the global seismic response of a single degree of freedom structural system with different structural periods, and types and intensities of ground motions. It is found that the impact of loading rates is more significant for structures with a period of 0.5 s or less and it thus requires a fast control of the physical specimen in pseudo‐dynamic hybrid testing. In addition, the material model is applied to a five‐storey buckling restrained braced frame (BRBF) building with a structural period of 1.2 s. It is found that the earthquake‐induced loading rates have a minor impact on the global response of the structure.
- 17 June 2022
- Published by Elsevier in Engineering Structures
- Vol. 266
Multi-platform simulation of reinforced concrete structures under impact loading
- 17 June 2022
- Published by Elsevier in Engineering Structures
- Vol. 266
Multi-platform simulation of reinforced concrete structures under impact loading
- 26 April 2022
- Published by Springer Nature in Bulletin of Earthquake Engineering
- Vol. 20 (10) , 5323-5348
Multi-platform simulation of infilled shear-critical reinforced concrete frames subjected to earthquake excitations
- 26 April 2022
- Published by Springer Nature in Bulletin of Earthquake Engineering
- Vol. 20 (10) , 5323-5348
Multi-platform simulation of infilled shear-critical reinforced concrete frames subjected to earthquake excitations
- 1 November 2021
- Published by Elsevier in Journal of Building Engineering
- Vol. 43
Multi-platform modelling of masonry infilled frames
- 1 November 2021
- Published by Elsevier in Journal of Building Engineering
- Vol. 43
Multi-platform modelling of masonry infilled frames
- 1 August 2021
- Published by American Society of Civil Engineers (ASCE) in Journal of Bridge Engineering
- Vol. 26 (8) , 04021058
Effects of Corrosion and Scouring on Barge Impact Fragility of Bridge Structures Considering Nonlinear Soil–Pile Interaction
This paper investigates the effects of corrosion and scouring on the barge impact fragility of bridge structures. A typical four-span continuous reinforced concrete (RC) bridge is selected as the baseline structure, and a detailed finite-element (FE) model of the structure is developed to simulate a barge collision. Corrosion of the bridge pier, scouring, and collision-induced soil–pile interaction are taken into account in the FE model. Surrogate models based on the response surface theory and FE model results are developed to efficiently generate the barge impact fragility surfaces using the Monte Carlo method. It is found for the baseline bridge structure that damage of the piles is not an increasing function of the barge’s velocity. In other words, the use of the maximum impact velocity for the barge-impact-resistant design cannot always lead to conservative results. Besides, scouring may have a net positive effect on the pier column response and bring more damage to the pile foundation.
- 1 August 2021
- Published by American Society of Civil Engineers (ASCE) in Journal of Bridge Engineering
- Vol. 26 (8) , 04021058
Effects of Corrosion and Scouring on Barge Impact Fragility of Bridge Structures Considering Nonlinear Soil–Pile Interaction
This paper investigates the effects of corrosion and scouring on the barge impact fragility of bridge structures. A typical four-span continuous reinforced concrete (RC) bridge is selected as the baseline structure, and a detailed finite-element (FE) model of the structure is developed to simulate a barge collision. Corrosion of the bridge pier, scouring, and collision-induced soil–pile interaction are taken into account in the FE model. Surrogate models based on the response surface theory and FE model results are developed to efficiently generate the barge impact fragility surfaces using the Monte Carlo method. It is found for the baseline bridge structure that damage of the piles is not an increasing function of the barge’s velocity. In other words, the use of the maximum impact velocity for the barge-impact-resistant design cannot always lead to conservative results. Besides, scouring may have a net positive effect on the pier column response and bring more damage to the pile foundation.
- 19 April 2021
- Published by Wiley in Earthquake Engineering & Structural Dynamics
- Vol. 50 (10) , 2634-2652
An integrated simulation method for soil‐structure interaction analysis of nuclear structures
This paper presents the development, implementation and application of an integrated simulation method for non‐linear soil‐structure interaction (SSI) analysis of nuclear structures. The integrated simulation method allows decomposition of the soil‐structure system into three subsystems: the superstructure, the soil‐foundation interface, and the soil domain. Each decomposed subsystem can be modelled independently using a proper finite element analysis program to accurately represent its non‐linear behaviour as per the current guideline for non‐linear SSI analysis of nuclear structures. The integrated simulation method is applicable to both static and dynamic analysis cases. The method was applied to the detailed SSI analysis of a realistic nuclear containment structure. The analysis was benefited by using different analysis tools for the three subsystems to capture both material and geometrical nonlinearities such as sliding and gapping at the soil‐foundation interface. The integrated model was compared with the model based on the fixed‐base assumption. Different results address the importance of non‐linear SSI analysis for seismic performance assessment of nuclear structures.
- 19 April 2021
- Published by Wiley in Earthquake Engineering & Structural Dynamics
- Vol. 50 (10) , 2634-2652
An integrated simulation method for soil‐structure interaction analysis of nuclear structures
This paper presents the development, implementation and application of an integrated simulation method for non‐linear soil‐structure interaction (SSI) analysis of nuclear structures. The integrated simulation method allows decomposition of the soil‐structure system into three subsystems: the superstructure, the soil‐foundation interface, and the soil domain. Each decomposed subsystem can be modelled independently using a proper finite element analysis program to accurately represent its non‐linear behaviour as per the current guideline for non‐linear SSI analysis of nuclear structures. The integrated simulation method is applicable to both static and dynamic analysis cases. The method was applied to the detailed SSI analysis of a realistic nuclear containment structure. The analysis was benefited by using different analysis tools for the three subsystems to capture both material and geometrical nonlinearities such as sliding and gapping at the soil‐foundation interface. The integrated model was compared with the model based on the fixed‐base assumption. Different results address the importance of non‐linear SSI analysis for seismic performance assessment of nuclear structures.
- Open Access
- 25 June 2020
- Published by Springer Nature in International Journal of Concrete Structures and Materials
- Vol. 14 (1) , 1-24
A Simplified Method to Predict Damage of Axially-Loaded Circular RC Columns Under Lateral Impact Loading
Detailed finite element (FE) models are often employed to predict the impact responses of reinforced concrete (RC) columns. However, they always require substantial investments of time and effort in modeling and analysis so that they are not widely used in practice, particularly in preliminary designs. Moreover, although some simplified models have been established for beams and slabs under impact loading, few attempts have been made on modeling RC columns. For these reasons, this paper proposes a simplified modeling method to accurately capture the impact-induced response and damage of circular RC columns. In the proposed method, a two-degree-of-freedom (DOF) system was used to describe the interaction between the impactor and the impacted column. The formulas, and procedure to estimate the force–deformation relationship with strain-rate effects were presented according to the section-based analysis. The influence of the unloading stiffness on the residual deformation was addressed, and the method to determine the unloading stiffness of circular columns was proposed. Furthermore, a fiber-based beam-column element modeling method was developed to estimate the force–deformation relationship of the columns with strain-rate effects. The proposed simplified method was demonstrated by the drop-hammer impact tests to be capable of predicting the impact response of RC columns well. Its accuracy in the residual deformation is superior to that of the detailed FE simulation. Parametric studies were performed to investigate the damage characteristics of axially-loaded circular RC columns under various impact scenarios.
- 25 June 2020
- Published by Springer Nature in International Journal of Concrete Structures and Materials
- Vol. 14 (1) , 1-24
Open AccessA Simplified Method to Predict Damage of Axially-Loaded Circular RC Columns Under Lateral Impact Loading
Detailed finite element (FE) models are often employed to predict the impact responses of reinforced concrete (RC) columns. However, they always require substantial investments of time and effort in modeling and analysis so that they are not widely used in practice, particularly in preliminary designs. Moreover, although some simplified models have been established for beams and slabs under impact loading, few attempts have been made on modeling RC columns. For these reasons, this paper proposes a simplified modeling method to accurately capture the impact-induced response and damage of circular RC columns. In the proposed method, a two-degree-of-freedom (DOF) system was used to describe the interaction between the impactor and the impacted column. The formulas, and procedure to estimate the force–deformation relationship with strain-rate effects were presented according to the section-based analysis. The influence of the unloading stiffness on the residual deformation was addressed, and the method to determine the unloading stiffness of circular columns was proposed. Furthermore, a fiber-based beam-column element modeling method was developed to estimate the force–deformation relationship of the columns with strain-rate effects. The proposed simplified method was demonstrated by the drop-hammer impact tests to be capable of predicting the impact response of RC columns well. Its accuracy in the residual deformation is superior to that of the detailed FE simulation. Parametric studies were performed to investigate the damage characteristics of axially-loaded circular RC columns under various impact scenarios.
- Open Access
- 28 April 2020
- Published by Elsevier in Computer-Aided Civil and Infrastructure Engineering
- Vol. 35 (10) , 1115-1131
An integrated simulation method for coupled dynamic systems
- 28 April 2020
- Published by Elsevier in Computer-Aided Civil and Infrastructure Engineering
- Vol. 35 (10) , 1115-1131
Open AccessAn integrated simulation method for coupled dynamic systems