Kotaro Kataoka
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Kotaro Kataoka has a total of 32 co-authors. Here are the top co-authors by number of shared publications:
- Anish Hirwe
Indian Institute of Technology Palakkad, Palakkad, India
3 shared publications - Abhinav Kumar
IIT Hyderabad
2 shared publications - Nadine E. Hasan
Indian Institute of Technology Hyderabad
2 shared publications - Pragati Shrivastava
Department of Computer Science and Engineering, Indian Institute of Technology Hyderabad, Hyderabad, India
2 shared publications - Prashanth Podili
Visvesvaraya National Institute of Technology Nagpur, Nagpur, India
2 shared publications - Achmad Husni Thamrin
Graduate School of Media and Governance, Keio University, 5322 Endo, Fujisawa-shi, Japan
1 shared publication
Latest Publications
- Open Access
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Vehicular Technology
- p. 1-16
Use Cases Aware Cross Layer Design for Hybrid mmWave and Sub-6 GHz System in V2X Networks
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Vehicular Technology
- p. 1-16
Open AccessUse Cases Aware Cross Layer Design for Hybrid mmWave and Sub-6 GHz System in V2X Networks
- Open Access
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of the Communications Society
- Vol. 7, 13904-13923
Joint Resource and Power Allocation for Mixed Traffic Adopting Multiple Casting Types in Cellular-V2X Networks
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of the Communications Society
- Vol. 7, 13904-13923
Open AccessJoint Resource and Power Allocation for Mixed Traffic Adopting Multiple Casting Types in Cellular-V2X Networks
- 10 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Intelligent Transportation Systems
- Vol. 27 (3) , 3066-3085
Enhancing Security and Achievability of PBFT-Based Consensus Development for Connected Vehicles With Location-Based Trust
In Intelligent Transportation Systems (ITS), permissioned blockchains have been adopted to record location specific traffic contexts among legitimate vehicles. This paper aims to address two challenges in using a permissioned blockchain for ITS: 1) ensuring the legitimacy and timeliness of vehicles together to join the permissioned blockchain and 2) maintaining the availability of contextually relevant, fast-moving vehicles to serve as endorsers for reliable consensus on traffic event verification at road junctions. This paper introduces V-Trust, an integrated system for a location specific PBFT-based blockchain network enhanced with Location Certificate, Fast Joining Protocol, Network Prefetch, Dynamic Endorsers Management, and Delayed Endorsement. These components ensure 1) the legitimacy and quickness of vehicles to join a permissioned blockchain, 2) the selection of contextually relevant vehicles for endorsing a traffic event, and 3) the improvement of endorser availability by allowing legitimate and contextually relevant vehicles to participate in the consensus even after leaving the junction. The V-Trust was simulated and evaluated using ns-3 with a 4G LTE setup. The evaluation results confirmed that V-Trust enables a vehicle to join a PBFT network with one bidirectional message exchange (virtually 1 RTT using a persistent TCP connection) between a vehicle and a Roadside Unit (RSU) and the communication overhead of O(1).
- 10 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Intelligent Transportation Systems
- Vol. 27 (3) , 3066-3085
Enhancing Security and Achievability of PBFT-Based Consensus Development for Connected Vehicles With Location-Based Trust
In Intelligent Transportation Systems (ITS), permissioned blockchains have been adopted to record location specific traffic contexts among legitimate vehicles. This paper aims to address two challenges in using a permissioned blockchain for ITS: 1) ensuring the legitimacy and timeliness of vehicles together to join the permissioned blockchain and 2) maintaining the availability of contextually relevant, fast-moving vehicles to serve as endorsers for reliable consensus on traffic event verification at road junctions. This paper introduces V-Trust, an integrated system for a location specific PBFT-based blockchain network enhanced with Location Certificate, Fast Joining Protocol, Network Prefetch, Dynamic Endorsers Management, and Delayed Endorsement. These components ensure 1) the legitimacy and quickness of vehicles to join a permissioned blockchain, 2) the selection of contextually relevant vehicles for endorsing a traffic event, and 3) the improvement of endorser availability by allowing legitimate and contextually relevant vehicles to participate in the consensus even after leaving the junction. The V-Trust was simulated and evaluated using ns-3 with a 4G LTE setup. The evaluation results confirmed that V-Trust enables a vehicle to join a PBFT network with one bidirectional message exchange (virtually 1 RTT using a persistent TCP connection) between a vehicle and a Roadside Unit (RSU) and the communication overhead of O(1).
- 26 August 2025
- Published by Elsevier in Future Generation Computer Systems
- Vol. 175
HRL-D3: High resolution and lightweight defective data detection for IoT data integrity
- 26 August 2025
- Published by Elsevier in Future Generation Computer Systems
- Vol. 175
HRL-D3: High resolution and lightweight defective data detection for IoT data integrity
- Open Access
- 1 July 2024
- Published by Association for Computing Machinery (ACM)
- p. 1378-1393
Revocable TACO: Revocable Threshold based Anonymous Credentials over Blockchains
The anonymity, multi-show unlinkability, and selective disclosure property of anonymous credentials enables users to access third-party services without revealing unnecessary details or being profiled. Threshold-based anonymous credentials provide a distributed framework to issue these credentials. While all of this enhances privacy, anonymity can also be misused and some schemes, therefore, have an opening mechanism, which enables the authorities to trace a user's identity. Nevertheless, relying solely on this measure is inadequate as the users can continue to use their previously issued anonymous credentials to authenticate themselves successfully with the service providers. To address this issue, we propose a revocation mechanism for such schemes using dynamic threshold accumulators (DTA) (Helminger et al. 2021). We first formally define a generic threshold-based anonymous credentials with an opening scheme (TACO) and subsequently propose an extension of TACO, "Revocable TACO (RTACO)" - revocable threshold-based credentials over blockchains - that integrates a revocation mechanism based on DTAs to the TACO system. In RTACO, we integrate a revocation handle into the credential as an extra attribute, allowing the disclosure of this attribute during the opening phase, which is then used to blocklist the credential, preventing its further use. We formally prove the security of this scheme in the universal composability (UC) framework. We also give a proof-of-concept implementation of RTACO over the Ethereum blockchain.
- 1 July 2024
- Published by Association for Computing Machinery (ACM)
- p. 1378-1393
Open AccessRevocable TACO: Revocable Threshold based Anonymous Credentials over Blockchains
The anonymity, multi-show unlinkability, and selective disclosure property of anonymous credentials enables users to access third-party services without revealing unnecessary details or being profiled. Threshold-based anonymous credentials provide a distributed framework to issue these credentials. While all of this enhances privacy, anonymity can also be misused and some schemes, therefore, have an opening mechanism, which enables the authorities to trace a user's identity. Nevertheless, relying solely on this measure is inadequate as the users can continue to use their previously issued anonymous credentials to authenticate themselves successfully with the service providers. To address this issue, we propose a revocation mechanism for such schemes using dynamic threshold accumulators (DTA) (Helminger et al. 2021). We first formally define a generic threshold-based anonymous credentials with an opening scheme (TACO) and subsequently propose an extension of TACO, "Revocable TACO (RTACO)" - revocable threshold-based credentials over blockchains - that integrates a revocation mechanism based on DTAs to the TACO system. In RTACO, we integrate a revocation handle into the credential as an extra attribute, allowing the disclosure of this attribute during the opening phase, which is then used to blocklist the credential, preventing its further use. We formally prove the security of this scheme in the universal composability (UC) framework. We also give a proof-of-concept implementation of RTACO over the Ethereum blockchain.
- 28 June 2024
- Published by Springer Nature
- p. 175-192
Rural and Social Innovation: India Japan Collaboration
- 28 June 2024
- Published by Springer Nature
- p. 175-192
Rural and Social Innovation: India Japan Collaboration
- Open Access
- 22 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 11, 63092-63106
Building a Digital Twin Network of SDN Using Knowledge Graphs
In SDN-based networks, contextual understanding of network behaviour and safe execution of operational decisions are important as part of the network management process. Digital Twin Network (DTN) is a promising concept which creates a virtual twin of a live SDN-based network to monitor the network from different angles with various granularities and enables it to verify an operational change without disturbing the live one. However, modelling the arbitrary decisions by an SDN Controller to form a DTN and managing the contextual information in a DTN are challenging tasks in various aspects. This paper proposes a data representation based DTN architecture integrating Knowledge Graph (KG) for data modelling and storage and Template as the context description approach. The combination of KG and Template can make the DTN management scalable with the flexibility of defining the contextual information with the relationship between network entities. It also enables efficient querying to the data storage and provides the reusability of functions and data storage for the DTN applications development. The proposed DTN architecture was implemented using an ONOS-based SDN Controller and Neo4j-based KG with built-in DTN applications for practical use. The PoC implementation exhibited short query response time and high query throughput in reading from and updating a KG, though the initial creation of a KG incurs a considerable delay which increases with its size.
- 22 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 11, 63092-63106
Open AccessBuilding a Digital Twin Network of SDN Using Knowledge Graphs
In SDN-based networks, contextual understanding of network behaviour and safe execution of operational decisions are important as part of the network management process. Digital Twin Network (DTN) is a promising concept which creates a virtual twin of a live SDN-based network to monitor the network from different angles with various granularities and enables it to verify an operational change without disturbing the live one. However, modelling the arbitrary decisions by an SDN Controller to form a DTN and managing the contextual information in a DTN are challenging tasks in various aspects. This paper proposes a data representation based DTN architecture integrating Knowledge Graph (KG) for data modelling and storage and Template as the context description approach. The combination of KG and Template can make the DTN management scalable with the flexibility of defining the contextual information with the relationship between network entities. It also enables efficient querying to the data storage and provides the reusability of functions and data storage for the DTN applications development. The proposed DTN architecture was implemented using an ONOS-based SDN Controller and Neo4j-based KG with built-in DTN applications for practical use. The PoC implementation exhibited short query response time and high query throughput in reading from and updating a KG, though the initial creation of a KG incurs a considerable delay which increases with its size.
- 10 August 2022
- Published by Springer Nature in Education and Information Technologies
- Vol. 28 (2) , 1957-1986
Investigating the effect of computer-mediated feedback via an LMS integration in a large-scale Japanese speaking class
In second or foreign language (SFL) education, oral corrective feedback (OCF) is widely used to individually correct students’ erroneous utterances during classroom hours. However, students cannot have sufficient opportunities for oral production and personalized feedback during classroom hours if a class is large-scale with many students. This paper addresses the lack of OCF opportunities in a large-scale class, assuming the causes to be the severe time constraints and the teachers’ labor intensiveness in examining students’ utterances and generating OCF. This research proposes using computer-mediated feedback (CMF) outside classroom hours to complement OCF in an online, semiautomated, and scalable fashion. This paper implements Oral Repetition Practice (ORP) Gym to provide students with sufficient opportunities for speaking practice through two types of CMFs; Hybrid Recast to enhance the recognition of errors and Explicit Error Correction to make errors detectable and correctable. Online External Assistant (OEA) is a mechanism used to increase the amount and quality of feedback by distributing the workload for scoring and generating CMF. The evaluation was conducted as a classroom observational study by introducing ORP Gym to a spoken Japanese SFL basics course with 55 students at an Indian university. Compared with the students who did not utilize ORP Gym, those who utilized ORP Gym performed more ORP and exhibited significant score improvement in the posttest. This research contributes to enabling CMF in large-scale SFL classes and empirically and statistically proving the improvement of the learning effect, including uptake and repair, by CMF using ORP Gym and an OEA.
- 10 August 2022
- Published by Springer Nature in Education and Information Technologies
- Vol. 28 (2) , 1957-1986
Investigating the effect of computer-mediated feedback via an LMS integration in a large-scale Japanese speaking class
In second or foreign language (SFL) education, oral corrective feedback (OCF) is widely used to individually correct students’ erroneous utterances during classroom hours. However, students cannot have sufficient opportunities for oral production and personalized feedback during classroom hours if a class is large-scale with many students. This paper addresses the lack of OCF opportunities in a large-scale class, assuming the causes to be the severe time constraints and the teachers’ labor intensiveness in examining students’ utterances and generating OCF. This research proposes using computer-mediated feedback (CMF) outside classroom hours to complement OCF in an online, semiautomated, and scalable fashion. This paper implements Oral Repetition Practice (ORP) Gym to provide students with sufficient opportunities for speaking practice through two types of CMFs; Hybrid Recast to enhance the recognition of errors and Explicit Error Correction to make errors detectable and correctable. Online External Assistant (OEA) is a mechanism used to increase the amount and quality of feedback by distributing the workload for scoring and generating CMF. The evaluation was conducted as a classroom observational study by introducing ORP Gym to a spoken Japanese SFL basics course with 55 students at an Indian university. Compared with the students who did not utilize ORP Gym, those who utilized ORP Gym performed more ORP and exhibited significant score improvement in the posttest. This research contributes to enabling CMF in large-scale SFL classes and empirically and statistically proving the improvement of the learning effect, including uptake and repair, by CMF using ORP Gym and an OEA.
- 2 July 2022
- Published by Springer Nature in Journal of Network and Systems Management
- Vol. 30 (4) , 1-35
Inter-Domain Prefix and Route Validation Using Fast and Scalable DAG Based Distributed Ledger for Secure BGP Routing
- 2 July 2022
- Published by Springer Nature in Journal of Network and Systems Management
- Vol. 30 (4) , 1-35
Inter-Domain Prefix and Route Validation Using Fast and Scalable DAG Based Distributed Ledger for Secure BGP Routing
- 31 August 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Network and Service Management
- Vol. 19 (1) , 510-523
Topology Poisoning Attacks and Prevention in Hybrid Software-Defined Networks
The hybrid software-defined networks (SDN) architectures are beneficial for a smooth transition and less costly SDN deployment. However, legacy switches and SDN switches coexistence brings new challenges of deployment inconsistency management and security. Security is not well studied for hybrid SDN architecture. In this paper, we study the topology poisoning attacks in hybrid SDN for the first time. We propose new attack vectors for link fabrication in hybrid SDN. The new attack is named “multi-hop link fabrication," in which an adversary successfully injects a fake multi-hop link (MHL) by exploiting the link discovery protocols. We presented the Hybrid-Shield, a link verification framework for hybrid SDN link discovery. Hybrid-Shield introduces a novel verification technique that includes: i) monitoring legacy switch and host generated traffic at MHL and ii) validating the existence of legacy switches contained in an MHL. This paper presents the prototype implementation of Hybrid-Shield over a real SDN controller. The experimental evaluation is performed with the mininet virtual network emulation. Our evaluation shows that Hybrid-Shield is capable of detecting MHL fabrication attacks in real-time with high accuracy. Hybrid-Shield’s performance evaluation shows that it is lightweight at the controller as it causes less overhead and requires no additional functionalities at the SDN controller for deployment.
- 31 August 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Network and Service Management
- Vol. 19 (1) , 510-523
Topology Poisoning Attacks and Prevention in Hybrid Software-Defined Networks
The hybrid software-defined networks (SDN) architectures are beneficial for a smooth transition and less costly SDN deployment. However, legacy switches and SDN switches coexistence brings new challenges of deployment inconsistency management and security. Security is not well studied for hybrid SDN architecture. In this paper, we study the topology poisoning attacks in hybrid SDN for the first time. We propose new attack vectors for link fabrication in hybrid SDN. The new attack is named “multi-hop link fabrication," in which an adversary successfully injects a fake multi-hop link (MHL) by exploiting the link discovery protocols. We presented the Hybrid-Shield, a link verification framework for hybrid SDN link discovery. Hybrid-Shield introduces a novel verification technique that includes: i) monitoring legacy switch and host generated traffic at MHL and ii) validating the existence of legacy switches contained in an MHL. This paper presents the prototype implementation of Hybrid-Shield over a real SDN controller. The experimental evaluation is performed with the mininet virtual network emulation. Our evaluation shows that Hybrid-Shield is capable of detecting MHL fabrication attacks in real-time with high accuracy. Hybrid-Shield’s performance evaluation shows that it is lightweight at the controller as it causes less overhead and requires no additional functionalities at the SDN controller for deployment.