Güneş Yılmaz
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Güneş Yılmaz has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Oğuzhan Coşkun
EMKO Elektronik A.Ş., Bursa, Turkey
5 shared publications - Abdurrahman Günday
BURSA ULUDAG UNIVERSITY, FACULTY OF ENGINEERING
2 shared publications Recep Eken
Mühendislik Fakültesi Bursa Uludağ Üniversitesi Elektrik-Elektronik Mühendisliği Bölümü 16059 Bursa
2 shared publications- Sait Eser Karlık
Department of Electrical and Electronics Engineering, Faculty of Engineering, Bursa Uludağ University, Bursa, Türkiye
2 shared publications - Volkan Başay
Electrical-Electronic Engineering Department, Bursa Uludag University, Bursa 16059, Turkey
2 shared publications - Emirhan Saǧ
Electrical and Electronics Engineering , Bursa Uludag University , Bursa , Turkey
1 shared publication
Latest Publications
- Open Access
Breaking the Cross-Sensitivity Degeneracy in FBG Sensors: A Physics-Informed Co-Design Framework for Robust Discrimination
The simultaneous measurement of strain and temperature using Fiber Bragg Grating (FBG) sensors presents a significant challenge due to the intrinsic cross-sensitivity of the Bragg wavelength. While recent studies have increasingly employed “black-box” machine learning algorithms to address this ambiguity, such approaches often overlook the physical limitations of the sensor’s spectral response. This paper challenges the assumption that advanced algorithms alone can compensate for data that is physically ambiguous. We propose a “Sensor-Algorithm Co-Design” methodology, demonstrating that robust discrimination is achievable only when the sensor architecture exhibits a unique, orthogonal physical signature. Using a rigorous Transfer Matrix Method (TMM) and 4 × 4 polarization analysis, we evaluate three distinct architectures. Quantitative analysis reveals that a standard Quadratically Chirped FBG (QC-FBG) functions as an “ill-conditioned baseline” failing to distinguish measurands due to feature space collapse (). Conversely, we validate two robust co-designs: (1) An Amplitude-Modulated Superstructure FBG (S-FBG) paired with an Artificial Neural Network (ANN), utilizing thermally induced duty-cycle variations to achieve high accuracy ( error) under noise; and (2) A Polarization-Diverse Inverse-Gaussian FBG (IG-FBG) paired with a 4 × 4 K-matrix, exploiting strain-induced birefringence (). Furthermore, we address the data scarcity issue in AI-driven sensing by introducing a Physics-Informed Neural Network (PINN) strategy. By embedding TMM physics directly into the loss function, the PINN improves data efficiency by 2.2× compared to standard models, effectively bridging the gap between physical modeling and data-driven inference, addressing the critical data scarcity bottleneck identified in recent optical sensing roadmaps.Open AccessBreaking the Cross-Sensitivity Degeneracy in FBG Sensors: A Physics-Informed Co-Design Framework for Robust Discrimination
The simultaneous measurement of strain and temperature using Fiber Bragg Grating (FBG) sensors presents a significant challenge due to the intrinsic cross-sensitivity of the Bragg wavelength. While recent studies have increasingly employed “black-box” machine learning algorithms to address this ambiguity, such approaches often overlook the physical limitations of the sensor’s spectral response. This paper challenges the assumption that advanced algorithms alone can compensate for data that is physically ambiguous. We propose a “Sensor-Algorithm Co-Design” methodology, demonstrating that robust discrimination is achievable only when the sensor architecture exhibits a unique, orthogonal physical signature. Using a rigorous Transfer Matrix Method (TMM) and 4 × 4 polarization analysis, we evaluate three distinct architectures. Quantitative analysis reveals that a standard Quadratically Chirped FBG (QC-FBG) functions as an “ill-conditioned baseline” failing to distinguish measurands due to feature space collapse (). Conversely, we validate two robust co-designs: (1) An Amplitude-Modulated Superstructure FBG (S-FBG) paired with an Artificial Neural Network (ANN), utilizing thermally induced duty-cycle variations to achieve high accuracy ( error) under noise; and (2) A Polarization-Diverse Inverse-Gaussian FBG (IG-FBG) paired with a 4 × 4 K-matrix, exploiting strain-induced birefringence (). Furthermore, we address the data scarcity issue in AI-driven sensing by introducing a Physics-Informed Neural Network (PINN) strategy. By embedding TMM physics directly into the loss function, the PINN improves data efficiency by 2.2× compared to standard models, effectively bridging the gap between physical modeling and data-driven inference, addressing the critical data scarcity bottleneck identified in recent optical sensing roadmaps. - 11 November 2025
- Published by Springer Nature in Arabian Journal for Science and Engineering
- Vol. 51 (6) , 8765-8786
Decoupling Capacitor Optimization to Reduce Conducted Emission of DC–DC Buck Converter Based on Differential Evolution Algorithm
- 11 November 2025
- Published by Springer Nature in Arabian Journal for Science and Engineering
- Vol. 51 (6) , 8765-8786
Decoupling Capacitor Optimization to Reduce Conducted Emission of DC–DC Buck Converter Based on Differential Evolution Algorithm
- Open Access
- 7 March 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (6) , 2884
Modeling and Estimating LIDAR Intensity for Automotive Surfaces Using Gaussian Process Regression: An Experimental and Case Study Approach
LIDAR technology is widely used in autonomous driving and environmental sensing, but its accuracy is significantly affected by variations in vehicle surface reflectivity. This study models and predicts the impact of different LIDAR sensor specifications and vehicle surface paints on laser intensity measurements. Laser intensity data from the experiments of Shung et al. were analyzed alongside vehicle color, angle, and distance. Multiple machine learning models were tested, with Gaussian Process Regression (GPR) performing best (RMSE = 0.87451, R2 = 0.99924). To enhance the model’s physical interpretability, laser intensity values were correlated with LIDAR optical power equations, and curve fitting was applied to refine the relationship. The model was validated using the input parameters from Shung et al.’s experiments, comparing predicted intensity values with reference measurements. The results show that the model achieves an overall accuracy of 99% and is successful in laser intensity prediction. To assess real-world performance, the model was tested on the CUPAC dataset, which includes various traffic and weather conditions. Spatial filtering was applied to isolate laser intensities reflected only from the vehicle surface. The highest accuracy, 98.891%, was achieved for the SW-Gloss (White) surface, while the lowest accuracy, 98.195%, was recorded for the SB-Matte (Black) surface. The results confirm that the model effectively predicts laser intensity across different surface reflectivity conditions and remains robust across different channels LIDAR systems.
- 7 March 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (6) , 2884
Open AccessModeling and Estimating LIDAR Intensity for Automotive Surfaces Using Gaussian Process Regression: An Experimental and Case Study Approach
LIDAR technology is widely used in autonomous driving and environmental sensing, but its accuracy is significantly affected by variations in vehicle surface reflectivity. This study models and predicts the impact of different LIDAR sensor specifications and vehicle surface paints on laser intensity measurements. Laser intensity data from the experiments of Shung et al. were analyzed alongside vehicle color, angle, and distance. Multiple machine learning models were tested, with Gaussian Process Regression (GPR) performing best (RMSE = 0.87451, R2 = 0.99924). To enhance the model’s physical interpretability, laser intensity values were correlated with LIDAR optical power equations, and curve fitting was applied to refine the relationship. The model was validated using the input parameters from Shung et al.’s experiments, comparing predicted intensity values with reference measurements. The results show that the model achieves an overall accuracy of 99% and is successful in laser intensity prediction. To assess real-world performance, the model was tested on the CUPAC dataset, which includes various traffic and weather conditions. Spatial filtering was applied to isolate laser intensities reflected only from the vehicle surface. The highest accuracy, 98.891%, was achieved for the SW-Gloss (White) surface, while the lowest accuracy, 98.195%, was recorded for the SB-Matte (Black) surface. The results confirm that the model effectively predicts laser intensity across different surface reflectivity conditions and remains robust across different channels LIDAR systems.
- Open Access
- 18 July 2024
- Published by MDPI AG in Applied Sciences
- Vol. 14 (14) , 6283
Optimization of Parametric Equalizer Filters in In-Vehicle Audio Systems with a Genetic Algorithm
This study aims to automate the optimization of a full-range speaker in an SUV’s audio system according to the equal-loudness contours principle. The input signal and frequency responses of the amplifier and speaker were transferred to Matlab. Using ideal filter parameters, ten parametric equalizer models were created, and the speaker output was obtained using the convolution technique. The same filter settings were applied to the vehicle multimedia system, and the experimental results were obtained. The simulation and experimental results were compared, showing high similarity, with a Pearson correlation of 0.9295 and a root mean square error (RMSE) of 2.29. The results were compared with the ideal contour. The Pearson correlation coefficients for the simulation and experimental results were 0.6341 and 0.6715, with RMSE values of 4.88 and 2.57, showing low similarity. Consequently, each parametric equalizer filter’s parameters were optimized using a genetic algorithm. The genetic algorithm was executed thirteen times for robustness, and the best parameters were selected. The optimized parameters were applied to the multimedia system, and the results were compared with the ideal contour. The correlation coefficients for the simulation and experimental results were 0.9692 and 0.9675, with RMSE values of 1.17 and 1.34. These results indicate that optimization aligns the speaker output closer to the ideal contour, enhancing in-vehicle audio system performance and increasing users’ satisfaction.
- 18 July 2024
- Published by MDPI AG in Applied Sciences
- Vol. 14 (14) , 6283
Open AccessOptimization of Parametric Equalizer Filters in In-Vehicle Audio Systems with a Genetic Algorithm
This study aims to automate the optimization of a full-range speaker in an SUV’s audio system according to the equal-loudness contours principle. The input signal and frequency responses of the amplifier and speaker were transferred to Matlab. Using ideal filter parameters, ten parametric equalizer models were created, and the speaker output was obtained using the convolution technique. The same filter settings were applied to the vehicle multimedia system, and the experimental results were obtained. The simulation and experimental results were compared, showing high similarity, with a Pearson correlation of 0.9295 and a root mean square error (RMSE) of 2.29. The results were compared with the ideal contour. The Pearson correlation coefficients for the simulation and experimental results were 0.6341 and 0.6715, with RMSE values of 4.88 and 2.57, showing low similarity. Consequently, each parametric equalizer filter’s parameters were optimized using a genetic algorithm. The genetic algorithm was executed thirteen times for robustness, and the best parameters were selected. The optimized parameters were applied to the multimedia system, and the results were compared with the ideal contour. The correlation coefficients for the simulation and experimental results were 0.9692 and 0.9675, with RMSE values of 1.17 and 1.34. These results indicate that optimization aligns the speaker output closer to the ideal contour, enhancing in-vehicle audio system performance and increasing users’ satisfaction.
- Open Access
- 7 June 2024
- Published by MDPI AG in Preprints.org
Optimization of Parametric Equalizer Filters in In-Vehicle Audio Systems with Genetic Algorithm
This study aims to automate the optimization of a Full-Range speaker in an SUV's audio system according to the equal loudness contours principle. The input signal, and frequency responses of the amplifier and speaker were transferred to Matlab. Using ideal filter parameters, ten parametric equalizer models were created, and the speaker output was obtained using the convolution technique. The same filter settings were applied to the vehicle multimedia system, and experimental results were obtained. The simulation and experimental results were compared, showing high similarity with a Pearson correlation coefficient of 0.9295 and an RMSE of 2.29. Results were compared with the ideal contour. The Pearson correlation coefficients for simulation and experimental results were 0.6341 and 0.6715, with RMSE values of 4.88 and 2.57, showing low similarity. Consequently, each parametric equalizer filter's parameters were optimized using a genetic algorithm. The optimized parameters were applied to the vehicle multimedia system, and results were compared with the ideal contour. The Pearson correlation coefficients for simulation and experimental results were 0.965 and 0.9661, with RMSE values of 2.12 and 1.48. These results indicate that optimization aligns the speaker output closer to the ideal contour, enhancing in-vehicle audio system performance and increasing user satisfaction.
- 7 June 2024
- Published by MDPI AG in Preprints.org
Open AccessOptimization of Parametric Equalizer Filters in In-Vehicle Audio Systems with Genetic Algorithm
This study aims to automate the optimization of a Full-Range speaker in an SUV's audio system according to the equal loudness contours principle. The input signal, and frequency responses of the amplifier and speaker were transferred to Matlab. Using ideal filter parameters, ten parametric equalizer models were created, and the speaker output was obtained using the convolution technique. The same filter settings were applied to the vehicle multimedia system, and experimental results were obtained. The simulation and experimental results were compared, showing high similarity with a Pearson correlation coefficient of 0.9295 and an RMSE of 2.29. Results were compared with the ideal contour. The Pearson correlation coefficients for simulation and experimental results were 0.6341 and 0.6715, with RMSE values of 4.88 and 2.57, showing low similarity. Consequently, each parametric equalizer filter's parameters were optimized using a genetic algorithm. The optimized parameters were applied to the vehicle multimedia system, and results were compared with the ideal contour. The Pearson correlation coefficients for simulation and experimental results were 0.965 and 0.9661, with RMSE values of 2.12 and 1.48. These results indicate that optimization aligns the speaker output closer to the ideal contour, enhancing in-vehicle audio system performance and increasing user satisfaction.
- 17 August 2022
- Published by Springer Nature in Analog Integrated Circuits and Signal Processing
- Vol. 113 (2) , 197-209
The effect of ferrite bead on conducted emission in an automotive LED driver module with DC–DC converters
- 17 August 2022
- Published by Springer Nature in Analog Integrated Circuits and Signal Processing
- Vol. 113 (2) , 197-209
The effect of ferrite bead on conducted emission in an automotive LED driver module with DC–DC converters
- Open Access
- 1 April 2022
- Published by Walter de Gruyter GmbH in Journal of Electrical Engineering
- Vol. 73 (2) , 146-151
Influence of temperature on detectable minimum rotation rate in i-FOGs using Er-doped SFSs
In this study, an interferometric fiber optic gyroscope (I-FOG) model exploiting the double-pass backward (DPB) erbium-doped superfluorescent fiber source (SFS) with both thin-film filter (TFF) and fiber bragg grating (FBG) reflectors has been constructed and the effects of temperature variations on mean wavelength and detectable minimum rotation rate (DMRR) have been theoretically analyzed. the simulations corresponding with the relations between these parameters for temperature variations in the range of −60 °C to + 90 °C, have been performed using Matlab 2021b. DMRR variations have been found as 6.01 ppm/K and 3.83 ppm/K for the system with TFF, whilst they are 15.31 ppm/K and 1.58 ppm/K for the system with FBG.
- 1 April 2022
- Published by Walter de Gruyter GmbH in Journal of Electrical Engineering
- Vol. 73 (2) , 146-151
Open AccessInfluence of temperature on detectable minimum rotation rate in i-FOGs using Er-doped SFSs
In this study, an interferometric fiber optic gyroscope (I-FOG) model exploiting the double-pass backward (DPB) erbium-doped superfluorescent fiber source (SFS) with both thin-film filter (TFF) and fiber bragg grating (FBG) reflectors has been constructed and the effects of temperature variations on mean wavelength and detectable minimum rotation rate (DMRR) have been theoretically analyzed. the simulations corresponding with the relations between these parameters for temperature variations in the range of −60 °C to + 90 °C, have been performed using Matlab 2021b. DMRR variations have been found as 6.01 ppm/K and 3.83 ppm/K for the system with TFF, whilst they are 15.31 ppm/K and 1.58 ppm/K for the system with FBG.
- Open Access
- 12 March 2020
- Published by Wiley in International Journal of Optics
- Vol. 2020, 1-8
Investigation of the Atmospheric Attenuation Factors in FSO Communication Systems Using the Taguchi Method
In this study, Mie and Rayleigh scattering in free space optics (FSO) communication systems were investigated in terms of the atmospheric attenuation. Because of the movement of the Earth, the communication distance and surrounding gas densities are inconsistent in each region. This change leads to atmospheric attenuation and then data losses and inefficient communication in FSO occur. Therefore, the density change and distance must be calculated in each communication once the data is transmitted. In the literature, it was observed that the atmospheric attenuation is regarding some FSO communication parameters such as transmission distance, visibility, and scatter particle size distribution, the number of particles per unit volume, scatter cross-sectional area, and wavelength. Besides, in real-time communication, it is necessary to update FSO parameters simultaneously. However, this updating process for all parameter takes a long time to adapt to a new position. This paper proposes the design of the experiment method (Doe) to determine the severity of the FSO parameters. And Taguchi’s Doe method allows analyzing of FSO communication system parameters to avoid long calculation time. Results show that the proposed method helps in understanding the priorities of the parameters in FSO and reducing the updating time.
- 12 March 2020
- Published by Wiley in International Journal of Optics
- Vol. 2020, 1-8
Open AccessInvestigation of the Atmospheric Attenuation Factors in FSO Communication Systems Using the Taguchi Method
In this study, Mie and Rayleigh scattering in free space optics (FSO) communication systems were investigated in terms of the atmospheric attenuation. Because of the movement of the Earth, the communication distance and surrounding gas densities are inconsistent in each region. This change leads to atmospheric attenuation and then data losses and inefficient communication in FSO occur. Therefore, the density change and distance must be calculated in each communication once the data is transmitted. In the literature, it was observed that the atmospheric attenuation is regarding some FSO communication parameters such as transmission distance, visibility, and scatter particle size distribution, the number of particles per unit volume, scatter cross-sectional area, and wavelength. Besides, in real-time communication, it is necessary to update FSO parameters simultaneously. However, this updating process for all parameter takes a long time to adapt to a new position. This paper proposes the design of the experiment method (Doe) to determine the severity of the FSO parameters. And Taguchi’s Doe method allows analyzing of FSO communication system parameters to avoid long calculation time. Results show that the proposed method helps in understanding the priorities of the parameters in FSO and reducing the updating time.
- Open Access
- 26 December 2019
- Published by Uludag University Journal of the Faculty of Engineering in Uludağ University Journal of The Faculty of Engineering
- Vol. 24 (3) , 397-412
TİTREŞİM, SICAKLIK ve SES FAKTÖRLERİNİN SÜRÜCÜ PERFORMANSI ÜZERİNDEKİ ETKİSİNİN AĞIRLIKLANDIRILMASI ve İNCELENMESİ
Günümüzde birçok insan trafik kazalarında hayatlarını kaybetmektedir. Trafik kazalarının en önemli nedeni olarak sürücülerin uykusuzluğu ve yorgunluğu gösterilmektedir. Bu nedenle sürücü performansı analizi konusunda yapılan araştırmalar büyük önem taşımaktadır. Bu çalışmada araç kabininde oluşan titreşim, ortam sıcaklığı ve ses gibi bozucu etkilerin sürücü performansı üzerindeki tümleşik etkisi ağırlıklandırılmış ve yorumlanmıştır. Önceki çalışmalarda yapılmış olan test sonuçlarından elde edilen sıcaklık, titreşim ve ses verileri ayrı ayrı derlenmiştir. 15 ile 40 °C arası sıcaklık, 58 ile 108 dB arası ses ve 1 ile 15 Hz arası titreşim değerlerinde sürücü göz kırpma frekansı, aracın orta çizgiden uzaklaşma miktarı, araç hız değişimi ve sürücünün Karolinska Uykululuk Skalası değerlendirme verileri elde edilmiştir. Veriler bağımlı örneklem t-testi yöntemi kullanılarak analiz edilmiştir. Göz kırpma frekansı, aracın orta çizgiden uzaklaşma miktarı ve araç hız değişimi bağımlı değişkenleri incelendiğinde, sıcaklık %55 oranla sürücü performansını en çok etkileyen parametre olarak tespit edilmiştir. Ardında titreşim %36 ve ses %9 oranlarla sürücü performansını etkilemektedir.
- 26 December 2019
- Published by Uludag University Journal of the Faculty of Engineering in Uludağ University Journal of The Faculty of Engineering
- Vol. 24 (3) , 397-412
Open AccessTİTREŞİM, SICAKLIK ve SES FAKTÖRLERİNİN SÜRÜCÜ PERFORMANSI ÜZERİNDEKİ ETKİSİNİN AĞIRLIKLANDIRILMASI ve İNCELENMESİ
Günümüzde birçok insan trafik kazalarında hayatlarını kaybetmektedir. Trafik kazalarının en önemli nedeni olarak sürücülerin uykusuzluğu ve yorgunluğu gösterilmektedir. Bu nedenle sürücü performansı analizi konusunda yapılan araştırmalar büyük önem taşımaktadır. Bu çalışmada araç kabininde oluşan titreşim, ortam sıcaklığı ve ses gibi bozucu etkilerin sürücü performansı üzerindeki tümleşik etkisi ağırlıklandırılmış ve yorumlanmıştır. Önceki çalışmalarda yapılmış olan test sonuçlarından elde edilen sıcaklık, titreşim ve ses verileri ayrı ayrı derlenmiştir. 15 ile 40 °C arası sıcaklık, 58 ile 108 dB arası ses ve 1 ile 15 Hz arası titreşim değerlerinde sürücü göz kırpma frekansı, aracın orta çizgiden uzaklaşma miktarı, araç hız değişimi ve sürücünün Karolinska Uykululuk Skalası değerlendirme verileri elde edilmiştir. Veriler bağımlı örneklem t-testi yöntemi kullanılarak analiz edilmiştir. Göz kırpma frekansı, aracın orta çizgiden uzaklaşma miktarı ve araç hız değişimi bağımlı değişkenleri incelendiğinde, sıcaklık %55 oranla sürücü performansını en çok etkileyen parametre olarak tespit edilmiştir. Ardında titreşim %36 ve ses %9 oranlarla sürücü performansını etkilemektedir.
- Open Access
- 28 September 2019
- Published by Uludag University Journal of the Faculty of Engineering in Uludağ University Journal of The Faculty of Engineering
- Vol. 24 (2) , 341-352
ORTA YÜKSEKLİKTE DAĞLIK BÖLGELERDE KURULAN GÜNEŞ ENERJİSİ SANTRALİNDE FOTOVOLTAİK MODÜLLERİN YAŞLANMASININ ARAŞTIRILMASI
Due to the increase in photovoltaic (PV) systems, it is important to make accurate estimates about the recycling of investment costs. Photovoltaic modules are subject to disturbances that may affect their stability, productivity and working life due to climate. In this study, it was investigated how ultraviolet (UV) rays, moisture and thermal cycles affect the life of photovoltaic modules which cause deterioration in the structure of photovoltaic modules in middle-high mountainous areas around Uludağ. The results obtained for the life of photovoltaic modules at the power plant established in the mid-mountain region at an altitude of 835 meters were compared with the life of photovoltaic modules at sea level. Since UV radiation is higher in the region where the power plant is installed, the module life is shortened by 5.6% and the module life is extended by 10% due to low temperature values. With the direct effect of humidity, the life of modules decreases by 5.8 %. Because of the more cloudy and rainy days, the effect of UV rays is getting low and 14% increase in module life is realized. Other case, if the plant is installed in higher regions such as 2000 m, how will the life of photovoltaic modules be affected were investigated. According to the results, it has been determined that the life of the modules at sea level will be 24.5 years, the life of the modules at 835 m height will be 25 years and the life of the modules at 2000 m height will be 22.5 years.
- 28 September 2019
- Published by Uludag University Journal of the Faculty of Engineering in Uludağ University Journal of The Faculty of Engineering
- Vol. 24 (2) , 341-352
Open AccessORTA YÜKSEKLİKTE DAĞLIK BÖLGELERDE KURULAN GÜNEŞ ENERJİSİ SANTRALİNDE FOTOVOLTAİK MODÜLLERİN YAŞLANMASININ ARAŞTIRILMASI
Due to the increase in photovoltaic (PV) systems, it is important to make accurate estimates about the recycling of investment costs. Photovoltaic modules are subject to disturbances that may affect their stability, productivity and working life due to climate. In this study, it was investigated how ultraviolet (UV) rays, moisture and thermal cycles affect the life of photovoltaic modules which cause deterioration in the structure of photovoltaic modules in middle-high mountainous areas around Uludağ. The results obtained for the life of photovoltaic modules at the power plant established in the mid-mountain region at an altitude of 835 meters were compared with the life of photovoltaic modules at sea level. Since UV radiation is higher in the region where the power plant is installed, the module life is shortened by 5.6% and the module life is extended by 10% due to low temperature values. With the direct effect of humidity, the life of modules decreases by 5.8 %. Because of the more cloudy and rainy days, the effect of UV rays is getting low and 14% increase in module life is realized. Other case, if the plant is installed in higher regions such as 2000 m, how will the life of photovoltaic modules be affected were investigated. According to the results, it has been determined that the life of the modules at sea level will be 24.5 years, the life of the modules at 835 m height will be 25 years and the life of the modules at 2000 m height will be 22.5 years.