Farong Kou
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Farong Kou has a total of 40 co-authors. Here are the top co-authors by number of shared publications:
Longlong Xing
School of Mechanical Engineering, Xi’an University of Science and Technology
6 shared publicationsPengtao Liu
School of Mechanical Engineering, Xi’an University of Science and Technology
6 shared publicationsGuohong Wang
School of Mechanical Engineering, Xi’an University of Science and Technology
5 shared publicationsTianxiang Yang
4 shared publicationsWenhua Lv
4 shared publicationsChaoxu Yang
3 shared publications
Latest Publications
- Open Access
- 1 June 2026
- Published by IOP Publishing in Smart Materials and Structures
- Vol. 35 (6) , 065021
A multifunctional smart actuator for vehicle suspensions: design, energy-actuation analysis, and validation of an integrated hydraulic-ball screw system
This study proposes the design and analysis of a novel integrated hydraulic-ball screw (HBS) actuator for energy-harvesting active vehicle suspensions. The proposed smart actuator synergistically combines a hydraulic damper with a ball-screw permanent magnet synchronous motor mechanism in a parallel configuration to address the performance-efficiency trade-off in conventional active systems. A comprehensive dynamic model is established. Through parameter identification experiments and simulation, the damping characteristics (especially the role of the hydraulic unit) and energy flow distribution of the actuator in both active and regenerative modes are thoroughly analyzed. Results show that, under standard grade C road excitation, the root-mean-square values of body acceleration, suspension dynamic deflection and dynamic tire load of the integrated HBS suspension are reduced by 14.42%, 25.36% and 1.28%, respectively, compared with the passive suspension. Extended operating condition analysis further confirms that the proposed system maintains effective vibration suppression capability under different excitation intensities and high-speed driving conditions, demonstrating strong adaptability to varying operating environments. In terms of energy characteristics, the hydraulic unit dissipates 76.87% of the vibration energy, significantly reducing the active power demand of the motor. Meanwhile, the electromechanical unit exhibits considerable energy-regeneration potential: 41.38 J of energy can be recovered under grade C road excitation, and the harvested energy further increases to 137.32 J and 419.25 J as the road condition deteriorates to grade D and grade E, respectively. This study validates the HBS actuator as a feasible multifunctional smart structure for next-generation suspensions, offering a unified solution for enhanced ride comfort and improved energy sustainability.
- 1 June 2026
- Published by IOP Publishing in Smart Materials and Structures
- Vol. 35 (6) , 065021
Open AccessA multifunctional smart actuator for vehicle suspensions: design, energy-actuation analysis, and validation of an integrated hydraulic-ball screw system
This study proposes the design and analysis of a novel integrated hydraulic-ball screw (HBS) actuator for energy-harvesting active vehicle suspensions. The proposed smart actuator synergistically combines a hydraulic damper with a ball-screw permanent magnet synchronous motor mechanism in a parallel configuration to address the performance-efficiency trade-off in conventional active systems. A comprehensive dynamic model is established. Through parameter identification experiments and simulation, the damping characteristics (especially the role of the hydraulic unit) and energy flow distribution of the actuator in both active and regenerative modes are thoroughly analyzed. Results show that, under standard grade C road excitation, the root-mean-square values of body acceleration, suspension dynamic deflection and dynamic tire load of the integrated HBS suspension are reduced by 14.42%, 25.36% and 1.28%, respectively, compared with the passive suspension. Extended operating condition analysis further confirms that the proposed system maintains effective vibration suppression capability under different excitation intensities and high-speed driving conditions, demonstrating strong adaptability to varying operating environments. In terms of energy characteristics, the hydraulic unit dissipates 76.87% of the vibration energy, significantly reducing the active power demand of the motor. Meanwhile, the electromechanical unit exhibits considerable energy-regeneration potential: 41.38 J of energy can be recovered under grade C road excitation, and the harvested energy further increases to 137.32 J and 419.25 J as the road condition deteriorates to grade D and grade E, respectively. This study validates the HBS actuator as a feasible multifunctional smart structure for next-generation suspensions, offering a unified solution for enhanced ride comfort and improved energy sustainability.
- 27 February 2026
- Published by Elsevier in Measurement
- Vol. 271
Modeling and measurement-based optimization of a hybrid motor-hydraulic regenerative suspension for efficient damping and energy recovery
- 27 February 2026
- Published by Elsevier in Measurement
- Vol. 271
Modeling and measurement-based optimization of a hybrid motor-hydraulic regenerative suspension for efficient damping and energy recovery
- 27 December 2025
- Published by Elsevier in Journal of Power Sources
- Vol. 666
Fractional-order-model-based state-of-charge fusion estimation for multi-chemistry lithium-ion batteries
- 27 December 2025
- Published by Elsevier in Journal of Power Sources
- Vol. 666
Fractional-order-model-based state-of-charge fusion estimation for multi-chemistry lithium-ion batteries
- 16 October 2025
- Published by IOP Publishing in Measurement Science and Technology
- Vol. 36 (10) , 106124
Adaptive robust cubature Kalman filter with maximum correntropy criterion and variational Bayesian for vehicle state estimation
The Kalman filter (KF) can accurately estimate vehicle states under the assumption of Gaussian noise. However, when the measurement system is subject to complex non-Gaussian noise disturbances, the estimation performance of traditional methods degrades significantly. To address this issue, this paper proposes an adaptive and robust nonlinear KF method for vehicle state estimation, namely the cubature KF with maximum correntropy criterion and variational Bayesian under error compensation term (VB-MCC-CKF-E). The proposed framework mainly consists of regression model construction, robust state estimation, and adaptive noise variance estimation. Specifically, a batch regression model is first constructed to account for linearization errors, and the MCC is introduced within this framework to derive the MCC-CKF-E algorithm. Then, a VB approach is employed to perform online adaptive estimation of the time-varying statistics of the measurement noise covariance. Furthermore, the computational complexity of the VB-MCC-CKF-E is analyzed, demonstrating that it meets real-time application requirements. Finally, simulation experiments for vehicle state estimation under complex non-Gaussian noise scenarios show that the proposed VB-MCC-CKF-E outperforms extended KF, CKF, and other MCC-based variants in terms of both robustness and estimation accuracy.
- 16 October 2025
- Published by IOP Publishing in Measurement Science and Technology
- Vol. 36 (10) , 106124
Adaptive robust cubature Kalman filter with maximum correntropy criterion and variational Bayesian for vehicle state estimation
The Kalman filter (KF) can accurately estimate vehicle states under the assumption of Gaussian noise. However, when the measurement system is subject to complex non-Gaussian noise disturbances, the estimation performance of traditional methods degrades significantly. To address this issue, this paper proposes an adaptive and robust nonlinear KF method for vehicle state estimation, namely the cubature KF with maximum correntropy criterion and variational Bayesian under error compensation term (VB-MCC-CKF-E). The proposed framework mainly consists of regression model construction, robust state estimation, and adaptive noise variance estimation. Specifically, a batch regression model is first constructed to account for linearization errors, and the MCC is introduced within this framework to derive the MCC-CKF-E algorithm. Then, a VB approach is employed to perform online adaptive estimation of the time-varying statistics of the measurement noise covariance. Furthermore, the computational complexity of the VB-MCC-CKF-E is analyzed, demonstrating that it meets real-time application requirements. Finally, simulation experiments for vehicle state estimation under complex non-Gaussian noise scenarios show that the proposed VB-MCC-CKF-E outperforms extended KF, CKF, and other MCC-based variants in terms of both robustness and estimation accuracy.
- 18 September 2025
- Published by IOP Publishing in Measurement Science and Technology
- Vol. 36 (9) , 096118
Research on road surface perception strategy for intelligent suspension based on vision and dynamics fusion
Road conditions in real-world driving are highly complex and subject to frequent changes. Traditional perception strategies often struggle to simultaneously achieve accurate road type classification and real-time estimation of roughness grade, especially under aging infrastructure, where two key challenges arise: the non-uniqueness of the ‘road types and roughness grades’ mapping, and the difficulty in accurately estimating impulsive feature parameters. To address these issues, this paper proposes a multimodal fusion road perception strategy for intelligent suspension systems, aiming to enhance perception accuracy and robustness by integrating visual imagery and dynamic response data. First, a data acquisition platform is developed to collect typical datasets covering both random and impulsive road surfaces. To resolve the non-uniqueness of the ‘road types and roughness grades’ mapping, a convolutional block attention module deeplabV3(CBAM-DeepLabV3) semantic segmentation network is used to extract visual road type features, and a random forest extreme gradient boosting (RF-XGBoost) model is employed to estimate road roughness grades. This fusion approach reveals the inherent ambiguity in the mapping between road types and roughness levels. A dynamic mapping inference mechanism is then constructed to enable adaptive updates of the mapping rules. To address the difficulty in estimating impulsive feature parameters, a novel method combining inverse perspective transformation with reinforcement learning is proposed. This approach enables multidimensional measurement of impulsive features, including longitudinal distance, width, and vertical height, significantly improving both parameter recognition accuracy and real-time performance. The proposed method is validated using a co-simulation platform based on Prescan, Carsim and Simulink. Test results show that the method achieves high recognition accuracy and strong generalization capability in road perception tasks, providing robust prior perception support for intelligent suspension control systems.
- 18 September 2025
- Published by IOP Publishing in Measurement Science and Technology
- Vol. 36 (9) , 096118
Research on road surface perception strategy for intelligent suspension based on vision and dynamics fusion
Road conditions in real-world driving are highly complex and subject to frequent changes. Traditional perception strategies often struggle to simultaneously achieve accurate road type classification and real-time estimation of roughness grade, especially under aging infrastructure, where two key challenges arise: the non-uniqueness of the ‘road types and roughness grades’ mapping, and the difficulty in accurately estimating impulsive feature parameters. To address these issues, this paper proposes a multimodal fusion road perception strategy for intelligent suspension systems, aiming to enhance perception accuracy and robustness by integrating visual imagery and dynamic response data. First, a data acquisition platform is developed to collect typical datasets covering both random and impulsive road surfaces. To resolve the non-uniqueness of the ‘road types and roughness grades’ mapping, a convolutional block attention module deeplabV3(CBAM-DeepLabV3) semantic segmentation network is used to extract visual road type features, and a random forest extreme gradient boosting (RF-XGBoost) model is employed to estimate road roughness grades. This fusion approach reveals the inherent ambiguity in the mapping between road types and roughness levels. A dynamic mapping inference mechanism is then constructed to enable adaptive updates of the mapping rules. To address the difficulty in estimating impulsive feature parameters, a novel method combining inverse perspective transformation with reinforcement learning is proposed. This approach enables multidimensional measurement of impulsive features, including longitudinal distance, width, and vertical height, significantly improving both parameter recognition accuracy and real-time performance. The proposed method is validated using a co-simulation platform based on Prescan, Carsim and Simulink. Test results show that the method achieves high recognition accuracy and strong generalization capability in road perception tasks, providing robust prior perception support for intelligent suspension control systems.
Modeling and dynamic analysis of a novel energy-regenerative hydraulically interconnected suspension
- 13 February 2025
- Published by Springer Nature in Ionics
- Vol. 31 (4) , 3311-3322
State of health estimation of lithium-ion batteries based on maximal information coefficient feature optimization and GJO-BP neural network
- 13 February 2025
- Published by Springer Nature in Ionics
- Vol. 31 (4) , 3311-3322
State of health estimation of lithium-ion batteries based on maximal information coefficient feature optimization and GJO-BP neural network