Luis G. Torres
Luis G. Torres has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
- Alejandro Alarcón
Colegio de Postgraduados
1 shared publication Carlos Orozco
UPIBI-Instituto Politécnico Nacional
1 shared publicationEsther Bautista
Instituto Politecnico Nacional-UPIBI, Departments of Bioprocess, Pharmacy and Food, Calle Acueducto s/n, Col Barrio la Laguna Ticoman, 07340, Mexico City, Mexico
1 shared publication- Gilberto Morales-Guzmán
Posgrado de Edafología, Colegio de Postgraduados, Montecillo, Texcoco, Estado de México, Mexico
1 shared publication Ines Garcia-Peña
UPIBI-Instituto Politécnico Nacional
1 shared publication- Isaac Chairez
Tecnologico de Monterrey, Institute of Advanced Materials for Sustainable Manufacturing, Zapopan, Mexico
1 shared publication
Latest Publications
- 15 June 2022
- Published by Taylor & Francis in International Journal of Phytoremediation
- Vol. 25 (3) , 329-338
Phytoremediation of soil contaminated with weathered petroleum hydrocarbons by applying mineral fertilization, an anionic surfactant, or hydrocarbonoclastic bacteria
This study evaluated the effect of the application of mineral fertilization (F), the anionic surfactant Triton X-100 (TX100), or the inoculation with a hydrocarbooclastic bacterial consortium (BCons) on the growth of Clitoria ternatea during the phytoremediation of a Gleysol contaminated with weathered petroleum hydrocarbons (39,000 mg kg−1 WPH) collected from La Venta, Tabasco (Mexico). The experiment consisted of a completely randomized design with seven treatments and four replications each under greenhouse conditions. The application of F (biostimulation) increased plant growth and biomass production; in contrast, TX100 only favored root biomass (11%) but significantly favored WPH degradation. Bioaugmentation with BCons did not show significant effects on plant growth. Nevertheless, the combination of biostimulation with bioaugmentation (BCons + F, BCons + TX100, and BCons + F+TX100) enhanced plant growth, hydrocarbonoclastic bacteria population, and WPH degradation when compared to treatments with the single application of bioaugmentation (BCons) or biostimulation (F). Application of mineral fertilization and commercial surfactant favored root biomass and degradation of weathered petroleum hydrocarbons (WPH). The reintroduction of hydrocarbonoclastic and surfactant-producer bacteria did not enhance plant growth but significantly contributed on WPH degradation from a chronically contaminated soil.
- 15 June 2022
- Published by Taylor & Francis in International Journal of Phytoremediation
- Vol. 25 (3) , 329-338
Phytoremediation of soil contaminated with weathered petroleum hydrocarbons by applying mineral fertilization, an anionic surfactant, or hydrocarbonoclastic bacteria
This study evaluated the effect of the application of mineral fertilization (F), the anionic surfactant Triton X-100 (TX100), or the inoculation with a hydrocarbooclastic bacterial consortium (BCons) on the growth of Clitoria ternatea during the phytoremediation of a Gleysol contaminated with weathered petroleum hydrocarbons (39,000 mg kg−1 WPH) collected from La Venta, Tabasco (Mexico). The experiment consisted of a completely randomized design with seven treatments and four replications each under greenhouse conditions. The application of F (biostimulation) increased plant growth and biomass production; in contrast, TX100 only favored root biomass (11%) but significantly favored WPH degradation. Bioaugmentation with BCons did not show significant effects on plant growth. Nevertheless, the combination of biostimulation with bioaugmentation (BCons + F, BCons + TX100, and BCons + F+TX100) enhanced plant growth, hydrocarbonoclastic bacteria population, and WPH degradation when compared to treatments with the single application of bioaugmentation (BCons) or biostimulation (F). Application of mineral fertilization and commercial surfactant favored root biomass and degradation of weathered petroleum hydrocarbons (WPH). The reintroduction of hydrocarbonoclastic and surfactant-producer bacteria did not enhance plant growth but significantly contributed on WPH degradation from a chronically contaminated soil.
- Open Access
- 10 April 2019
- Published by Croatian Society of Chemical Engineers/HDKI in Chemical and Biochemical Engineering Quarterly
- Vol. 33 (1) , 87-98
Influence of Sparger Type and Regime of Fluid on Biomass and Lipid Productivity of Chlorella vulgaris Culture in a Pilot Airlift Photobioreactor
The effect of different types of spargers and the influence of the air flow rate on biomass and lipids production by Chlorella vulgaris was evaluated. These data allowed correlation of the hydrodynamic behavior of the photobioreactor with the byproducts production. The hydrodynamic characterization was developed by determining the mixing time (tM), hold-up, and total volumetric mass transfer coefficient of CO2, kLa(CO2)T, at increasing air flow rates for three different spargers: star-shaped, cross-shaped and porous glass surface sparger. The hydrodynamic characterization showed that the tM decreased, while the hold-up values and the kLa(CO2)T increased as a result of the increment in the volumetric air flow rate between 5 to 17 L min–1. The highest biomass and lipid concentrations were determined at the higher aeration rate (20 L min–1), which was correlated with the lower tM, the higher hold-up and kLa(CO2)T values. Biomass and lipid production showed an inverse correlation. The highest biomass concentration (750 mg L–1) and the lowest lipid concentration (10 mg L–1) were measured with the star sparger. In contrast, when the lowest biomass concentration was obtained (240 mg L–1), the highest lipid concentration of 196 mg L–1 was measured with the glass sparger. The maximum biomass productivity values were determined at the lower aeration rate and the star sparger, with the minimum power per unit of volume, which could be useful for a cost-effective process.
- 10 April 2019
- Published by Croatian Society of Chemical Engineers/HDKI in Chemical and Biochemical Engineering Quarterly
- Vol. 33 (1) , 87-98
Open AccessInfluence of Sparger Type and Regime of Fluid on Biomass and Lipid Productivity of Chlorella vulgaris Culture in a Pilot Airlift Photobioreactor
The effect of different types of spargers and the influence of the air flow rate on biomass and lipids production by Chlorella vulgaris was evaluated. These data allowed correlation of the hydrodynamic behavior of the photobioreactor with the byproducts production. The hydrodynamic characterization was developed by determining the mixing time (tM), hold-up, and total volumetric mass transfer coefficient of CO2, kLa(CO2)T, at increasing air flow rates for three different spargers: star-shaped, cross-shaped and porous glass surface sparger. The hydrodynamic characterization showed that the tM decreased, while the hold-up values and the kLa(CO2)T increased as a result of the increment in the volumetric air flow rate between 5 to 17 L min–1. The highest biomass and lipid concentrations were determined at the higher aeration rate (20 L min–1), which was correlated with the lower tM, the higher hold-up and kLa(CO2)T values. Biomass and lipid production showed an inverse correlation. The highest biomass concentration (750 mg L–1) and the lowest lipid concentration (10 mg L–1) were measured with the star sparger. In contrast, when the lowest biomass concentration was obtained (240 mg L–1), the highest lipid concentration of 196 mg L–1 was measured with the glass sparger. The maximum biomass productivity values were determined at the lower aeration rate and the star sparger, with the minimum power per unit of volume, which could be useful for a cost-effective process.
- 20 July 2018
- Published by Springer Nature in Waste and Biomass Valorization
- Vol. 11 (4) , 1309-1320
Three Microalgae Strains Growth and Lipids Production Based on Human Urine Solutions Supplemented with Four Metals
- 20 July 2018
- Published by Springer Nature in Waste and Biomass Valorization
- Vol. 11 (4) , 1309-1320
Three Microalgae Strains Growth and Lipids Production Based on Human Urine Solutions Supplemented with Four Metals
- Open Access
- 22 March 2018
- Published by Sciencedomain International in Journal of Advances in Microbiology
- Vol. 9 (3) , 1-16
Production and Broad Characterization of a Spirulina platensis Dry Powder Grown in Bubbled Columns
Aims: The aim of this work was to show the feasibility of growing Spirulina platensis in bubbled photo-bioreactors in a defined medium and after recovery and drying processes, to obtain a dry powder with food and nutraceutic characteristics such as those obtained by the proximal analysis, lipids and pigments profile, metals content, quelant and radical scavenger, antioxidant and antibiotic properties. Place and Duration of Study: The work was carried out at Unidad Profesional Interdisciplinaria de Biotecnologia-IPN (Mexico City) facilities during 2017. Methodology: In this paper, the mass production of microalgae in four 200 L bubbled column addresses growing in alkaline and saline, under ambient conditions and the complete characterization of the product in terms of its proximate analysis, metal content and the ability to inhibit growth of some microorganisms. A phytochemicals profile was carried out (qualitative results), the antibiotic activities against Gram negative and positive strains and an analysis of the present lipids and pigments were carried out. Finally, antioxidant and radical scavenging properties of the product were measured. Results: Photo-bioreactor 1 produced the highest concentration of biomass, although the largest mass of wet weight (757.6 g) and dry (160.8 g), were observed for the photo-photo-bioreactor 4. The photo-bioreactor 4 reached a mass productivity of 2.39 mg L-1h-1. On average, 153.35 g dry mass per photo-photo-bioreactor were produced, with a mass productivity of 2.28 mg L-1h-1. The obtained product compared well to a commercial one, with similar content of carbohydrates, protein, lipid, fiber, ash and total moisture (%). A phytochemicals profile was carried out (qualitative results). Regarding the Mexican standards, the product is below the recommended values only for ashes and crude fiber. Several alkaline earth and heavy metal values were found in the product. When calculating the intake of an adult weight of 70 kg who ingested 4 g day-1 of Spirulina, the values are not higher than the recommended intake for an adult by various associations (FAO/WHO, among them). It also found that the product had antibiotic activity against some Gram-positive and Gram-negative bacteria strains. It was also identified that the product had antioxidant and chelating activities and an analysis of the present lipids and pigments were carried out. Conclusion: It can be said that the culture process in the bubbled photo-bioreactors generates a dry product with excellent food and nutraceutic properties which can be employed to solve malnutrition problems that small communities are experiencing in Mexico.
- 22 March 2018
- Published by Sciencedomain International in Journal of Advances in Microbiology
- Vol. 9 (3) , 1-16
Open AccessProduction and Broad Characterization of a Spirulina platensis Dry Powder Grown in Bubbled Columns
Aims: The aim of this work was to show the feasibility of growing Spirulina platensis in bubbled photo-bioreactors in a defined medium and after recovery and drying processes, to obtain a dry powder with food and nutraceutic characteristics such as those obtained by the proximal analysis, lipids and pigments profile, metals content, quelant and radical scavenger, antioxidant and antibiotic properties. Place and Duration of Study: The work was carried out at Unidad Profesional Interdisciplinaria de Biotecnologia-IPN (Mexico City) facilities during 2017. Methodology: In this paper, the mass production of microalgae in four 200 L bubbled column addresses growing in alkaline and saline, under ambient conditions and the complete characterization of the product in terms of its proximate analysis, metal content and the ability to inhibit growth of some microorganisms. A phytochemicals profile was carried out (qualitative results), the antibiotic activities against Gram negative and positive strains and an analysis of the present lipids and pigments were carried out. Finally, antioxidant and radical scavenging properties of the product were measured. Results: Photo-bioreactor 1 produced the highest concentration of biomass, although the largest mass of wet weight (757.6 g) and dry (160.8 g), were observed for the photo-photo-bioreactor 4. The photo-bioreactor 4 reached a mass productivity of 2.39 mg L-1h-1. On average, 153.35 g dry mass per photo-photo-bioreactor were produced, with a mass productivity of 2.28 mg L-1h-1. The obtained product compared well to a commercial one, with similar content of carbohydrates, protein, lipid, fiber, ash and total moisture (%). A phytochemicals profile was carried out (qualitative results). Regarding the Mexican standards, the product is below the recommended values only for ashes and crude fiber. Several alkaline earth and heavy metal values were found in the product. When calculating the intake of an adult weight of 70 kg who ingested 4 g day-1 of Spirulina, the values are not higher than the recommended intake for an adult by various associations (FAO/WHO, among them). It also found that the product had antibiotic activity against some Gram-positive and Gram-negative bacteria strains. It was also identified that the product had antioxidant and chelating activities and an analysis of the present lipids and pigments were carried out. Conclusion: It can be said that the culture process in the bubbled photo-bioreactors generates a dry product with excellent food and nutraceutic properties which can be employed to solve malnutrition problems that small communities are experiencing in Mexico.
- 29 September 2010
- Published by Taylor & Francis in Journal of Environmental Science and Health, Part A
- Vol. 45 (13) , 1715-1719
Disinfection of a wastewater flow treated by advanced primary treatment using O3, UV and O3/UV combinations
This study was conducted to evaluate the ozone, UV and O3/UV processes for the reuse of sewage treatment plant effluent (Universidad Autonoma Metropolitana Azcapotzalco wastewater treatment plant). The ozone/UV process was compared to individual ozone and the UV processes and control parameters were total and fecal coliforms. Different ozone concentrations (6–12 mg O3/min) and different UV fluencies (6.7–20.12 mJ/cm2) were tested. It is possible to conclude than none of the processes achieved the disinfection levels required to comply with the Mexican standard NOM-003-SEMARNAT-1997. The continuous ozone process offered the lower total and fecal coliforms reductions, while UV light resulted a disinfection agent with higher germicide power than ozone. The maximum logarithmic reduction achieved due to the combined ozone/UV process was of 2.04 for fecal coliforms and of 2.17 for total coliforms. The next 8 combinations showed lower removal efficiencies, but always higher than those obtained with the single ozone or UV processes. The ozone/UV process was highly effective for the disinfection and a synergistic effect was observed.
- 29 September 2010
- Published by Taylor & Francis in Journal of Environmental Science and Health, Part A
- Vol. 45 (13) , 1715-1719
Disinfection of a wastewater flow treated by advanced primary treatment using O3, UV and O3/UV combinations
This study was conducted to evaluate the ozone, UV and O3/UV processes for the reuse of sewage treatment plant effluent (Universidad Autonoma Metropolitana Azcapotzalco wastewater treatment plant). The ozone/UV process was compared to individual ozone and the UV processes and control parameters were total and fecal coliforms. Different ozone concentrations (6–12 mg O3/min) and different UV fluencies (6.7–20.12 mJ/cm2) were tested. It is possible to conclude than none of the processes achieved the disinfection levels required to comply with the Mexican standard NOM-003-SEMARNAT-1997. The continuous ozone process offered the lower total and fecal coliforms reductions, while UV light resulted a disinfection agent with higher germicide power than ozone. The maximum logarithmic reduction achieved due to the combined ozone/UV process was of 2.04 for fecal coliforms and of 2.17 for total coliforms. The next 8 combinations showed lower removal efficiencies, but always higher than those obtained with the single ozone or UV processes. The ozone/UV process was highly effective for the disinfection and a synergistic effect was observed.