Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Burak Esenboğa has a total of 31 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Parametric Sensitivity-Based Optimization of Additively Manufactured Permanent Magnets for Enhanced PMDC Motor Performance

    by Burak Esenboğa

    A permanent magnet DC (PMDC) motor is among the most widely employed electrical machines due to its simple structure, high torque density, and cost-effectiveness. As energy efficiency, compact design, and operational reliability become increasingly critical in modern engineering systems, optimizing the design of PMDC motors has emerged as a significant area of interest. In particular, the configuration and material properties of permanent magnets strongly influence motor performance characteristics, including efficiency, torque production, and durability. Therefore, this paper presents a systematic approach that enhances the efficiency of PMDC motors by integrating detailed performance analysis with optimized design strategies. The contribution of magnetic effects to motor performance was analyzed in detail using the parameters of pole embrace, pole offset, and magnet thickness. A finite element method (FEM)-based numerical analysis is employed to perform a parametric sensitivity study of magnet geometry, aiming to reduce cogging torque and enhance electromagnetic torque and efficiency. The magnets of the 12 W, 2 pole, 1000 rpm PMDC motor were produced via additive manufacturing (AM). The fabricated samples were then tested and experimentally validated to assess their electromagnetic and performance characteristics. The results demonstrated an efficiency enhancement from 74.1% to 84.6% and a torque increase from 3.93 Nm to 4.93 Nm, while the cogging torque decreased from 0.0315 Nm to 0.009 Nm. The findings obtained from the FEM-based sensitivity analysis and electromagnetic field analyses validated the experimental design procedure of the proposed PMDC motor.


  • Design Optimization of Permanent Magnet Synchronous Motors: An Analytical Review and Case Study

    by Burak Esenboğa, Fırat Ekinci

    Permanent Magnet Synchronous Motors (PMSMs) are widely used in industrial and electric vehicle applications for their high efficiency, compact size, and precise controllability. However, cogging torque remains a key issue, causing vibration, noise, and performance loss, especially at variable speeds. This study presents a Finite Element Analysis (FEA)-based parametric optimization approach to improve the magnetic and structural performance of a 20-kW, 138-V, 6-pole PMSM. Instead of heuristic algorithms, the method refines key geometric parameters such as magnet thickness, pole embrace, and pole offset that strongly affect flux distribution, torque, and vibration. Using ANSYS Maxwell, simulations analyze their effects on efficiency, air-gap flux density, and cogging torque. Results indicate a decrease in cogging torque from 7.56 Nm to 4.74 Nm and an approximate 15% enhancement in efficiency, leading to improved torque smoothness and more uniform magnetic flux distribution. The study highlights the importance of precise geometric optimization for higher performance and lower noise.


  • Open Access

    Determining the Optimal Copper and Brass Connector Type for High Current Generators Used in Aircraft Lightning Test

    by Tuğçe Demirdelen, Hüseyin Avni Kabasakal, Burak Esenboğa, Mirzahan Hizal

    Aircraft in the aviation sector are required to meet stringent certification criteria established by civil aviation authorities. One crucial method to assess thiscompliance is through high current testing, which evaluates how electrical and electronic systems respond under specific conditions. Modern aircraft areequipped with a wide array of electronic systems, making electromagnetic compatibility (EMC) a critical consideration. High current pulse generators play a keyrole in conducting EMC tests, ensuring that onboard systems can operate harmoniously with each other and resist interference from external electromagneticfields. High current tests of electrical and electronic systems evaluate system performance against sudden voltage changes, electrical noise, and other electrical problems that may be encountered under normal operating conditions. High current pulse generators ensure avionics equipment’s operational quality andreliability by testing pulses for these systems. This study focuses on the performance of copper and brass fasteners commonly used in high current generators.In the experiments, output signals were observed in contact made using copper and brass connectors with diameters of 10 mm, 5 mm, and 1 mm. The effectof contact type on resistance is emphasized. The study reveals that the contact type provides low contact resistance in metal-metal contacts and contributes tothe contacts’ longevity by reducing the welding method’s oxidation effects. The results show the effects of material selection, contact shape, and type on thecontact resistance, increasing the energy transmission efficiency of a low-resistance circuit. It provides important information on how to extend the contact life.Cite this article as: Demirdelen T, Kabasakal HA, Esenboğa B, Hizal M. Determining the optimal copper and brass connector type for high currentgenerators used in aircraft lightning test. Turk J Electr Power Energy Syst., Published online October 20, 2025. doi: 10.5152/tepes.2025.25028.

  • Open Access

    Performance Analysis of Additive Manufacturing of Electrodes via Selective Laser Sintering for Green Hydrogen Production

    by Fırat Ekinci, Mehmet Erman Mert, Hüseyin Nazlıgül, Başak Doğru Mert, Burak Esenboğa, Abdurrahman Yavuzdeğer

    Standard electrodes have limitations in design flexibility, production time, cost, material waste, and customization. Additive manufacturing overcomes these barriers, offering an efficient, cost-effective, and environmentally friendly approach to manufacturing electrochemical components. This study explores the usability of selective laser sintering for producing electrodes for green hydrogen production, focusing on emergency applications and prototype development. A honeycomb-structured metal cathode for alkaline electrolysis is 3D-printed and tested for tensile strength. Electrochemical methods, including cyclic voltammetry, linear sweep voltammetry, and chronoamperometry, evaluate its catalytic performance against graphite and platinum electrodes. For a 30-minute electrolysis period, the volume of hydrogen gas values for selective laser sintering manufactured cathode electrodes @ 2.4, 2.7, and 3 V are 10.5, 19.75, and 28.5 mL, respectively. Results show superior performance compared to literature. Additionally, wind turbine models (NACA12, NACA15, NACA18) are analyzed for hydrogen production efficiency, with NACA12 proving most effective at moderate to high wind speeds.

  • Comparative Performance Analysis of PMSGs Using Various Core Materials for Wind Turbine Application

    by Burak Esenboğa

    Permanent Magnet Synchronous Generator (PMSG) cores play an important role in determining the performance of wind power. Core materials of PMSGs influence magnetic flux density, minimize losses, facilitate heat dissipation, ensure mechanical stability, and balance cost considerations. The use of different core materials has a significant impact on PMSG systems efficiency and overall performance in wind generation. Therefore, this study provides a comparative performance analysis for PMSG systems using diverse core materials in wind turbine applications. The design and analysis methodology is based on ANSYS/MAXWELL simulation software. The proposed model for a wind turbine is designed with 380 V, 50 Hz, and 24 HP output power. The study investigates the performance characteristics of PMSG systems utilizing various core materials such as silicon steel, amorphous steel, and ferrite materials. During the design phase, the Finite Element Analysis (FEA) is performed to compare core materials using ANSYS Maxwell. The results demonstrate the effectiveness and accuracy of the design approach using different core materials. The results help guide the selection of the best core materials to improve the efficiency and sustainability of wind energy systems based on PMSG.

  • Open Access

    Optimal Design and Analysis of High-Frequency Isolation Transformer for Switched-Mode Power Converters

    by Abdurrahman Yavuzdeğer, Burak Esenboğa, Tuğçe Demirdelen

    High-frequency (HF) transformers have gained great interest in recent years due to the advent of powerful soft magnetic materials with low core loss in semiconductor power switches. Also, the optimal design of the HF transformer is a significant issue for high-performance energy conversion systems. In this paper, a 40W 50/12.5/25 V universal input and two output discontinuous-conduction mode (DCM) flyback transformer is designed by using mathematical calculations and analyzed via 3D ANSYS/Maxwell simulation including electromagnetic and loss analysis. It is shown that the simulation results accounting for hysteresis losses, eddy current losses, copper losses, and magnetic flux density determine the accuracy of the mathematical model calculation. Analyzes are performed at 100 kHz frequency levels. Results obtained will include core magnetic flux density, core/copper losses, leakage/magnetizing inductances, windings parasitic capacitances, input/output voltage, current values, and all design parameters. Finally, the proposed HF transformer's overall efficiency is calculated and presented. Significantly, the HF transformer achieves 97.8% efficiency thanks to the transformer's core and coil selection, B-H and B-P characteristics, one-to-one dimension design, and mesh operation. The dynamic and mathematical results of the designed transformer demonstrate the design and efficiency success

  • Open Access

    Assessment of Corporate Carbon Footprint and Energy Analysis of Transformer Industry

    by Manolya Güldürek, Burak Esenboğa

    Transformers are primarily key components in power transmission and distribution systems. In the electrical industry, transformers are becoming increasingly important to increase energy efficiency and reduce environmental impact. In the process from the production to the use of transformers, various strategies and technologies are adopted to reduce the carbon footprint. To achieve decarbonization targets and a future with sustainable energy, ongoing efforts to reduce the carbon footprint of transformers need to continue. Therefore, this study aims to calculate the carbon footprint (CF) of Beta Energy in the Adana Province of Türkiye. A comprehensive inventory is being created to determine and monitor the greenhouse gas emissions of Beta Energy, a transformer manufacturer. This inventory includes direct and indirect greenhouse gas emissions from all of the company’s activities. The findings show that in 2023, the total CF of Beta Energy is equal to 1,799,482.72 tons of CO2-eq and considering the total of 6044 transformers sold in 2023, results in 297 tons of CO2-eq/transformer per product. The results show that the transformer manufacturing industry has a high carbon footprint because it is an energy-intensive process. The areas where the most carbon emissions occur in transformer production are revealed by CF hot spot analysis in this study. To minimize both current and future greenhouse gas emissions during transformer production, the measures to be taken during the R&D, production, transportation, and service stages are revealed. This study aims to establish a foundation for Beta Energy’s efforts to reduce greenhouse gas emissions by managing them effectively.


  • Open Access

    Carbon Emission Analysis and Reporting in Urban Emissions: An Analysis of the Greenhouse Gas Inventories and Climate Action Plans in Sarıçam Municipality

    by Orkun Davutluoğlu, Abdurrahman Yavuzdeğer, Burak Esenboğa, Özge Demirdelen, Kübra Tümay Ateş, Tuğçe Demirdelen

    The urban carbon footprint (UCF) is an important tool for assessing an organization’s ecological impacts and in guiding sustainability efforts. This calculation is usually measured in tons of carbon dioxide equivalent (CO2-eq). Calculations provide important data to determine strategies to reduce the carbon footprint and establish sustainability targets. Various standards and protocols guide UCF calculation, and many organizations aim to make these data transparent to their stakeholders and the public. This study aims to calculate the UCF of Sarıçam Municipality (SM) in the Adana Province of Türkiye. This study includes the greenhouse gas emission inventories resulting from all activities of the SM main service building, guest house, construction site service building, Cultural Center service building, and additional service buildings between 1 January 2022 and 31 December 2022. The calculations include generator fuel consumption, electricity consumption, the refrigerant gas leaks and refills resulting from these activities, the fuel consumed in vehicles owned by the company or whose fuel consumption is under company control, emissions originating from personal travel, emissions originating from customers and visitors, emissions originating from business travel, purchases, etc. Emissions from products purchased and emissions from waste transportation are included. The findings show that, in 2022, the total UCF of SM was equal to 10,862.46 tons of CO2-eq. The Paris Agreement aims to reduce the per capita emissions to approximately two tons of CO2-eq by 2030. The carbon footprint per employee within the municipality was calculated at 12.43 tons of CO2-eq, as derived from the analyzed data. The results reveal the importance of implementing sustainable practices and strategies within SM, such as energy efficiency measures, waste reduction, and the adoption of renewable energy sources, to mitigate its carbon footprint. This study plans to provide a basis for SM’s reduction efforts by keeping greenhouse gas emissions under control.


  • Open Access

    Assessing the Carbon Footprint of Plastic Bottle Blow Mold Based on Product Life Cycle for Managing the Mold Industry’s Carbon Emission

    by Abdurrahman Yavuzdeğer, Burak Esenboğa, Kübra Tümay Ateş, Özge Demirdelen, Mehmet Yüksel

    Calculating the carbon footprint (CF) holds paramount importance in today’s world as it provides a tangible measure of our impact on the environment. In the corporate realm, businesses armed with CF data can optimize operations, reduce waste, and adopt greener technologies, leading to both environmental and economic benefits. In this study, carbon emissions—a significant global issue—are investigated through the lens of the ISO 14067-ISO Product Based Carbon Footprint (CF) standard, focusing on the operations of a mold company. The primary innovation lies in meticulously tracing every stage of plastic bottle blow mold production, the most prevalent product in the mold industry, from its raw material input to its final form as a mold in the factory. Subsequently, detailed calculations and analysis are conducted to quantify the carbon footprint associated with this process and its impact on the environment. The calculated CF for one ton of PBBM produced by Petka Mold Industry is presented. This study fills a critical gap in the literature by providing a holistic understanding of the carbon footprint of plastic bottle blow mold (PBBM) production, thereby offering valuable insights for managing carbon emissions and promoting sustainability within the mold industry. By integrating a life cycle product carbon footprint thinking into industrial practices, a greener, more sustainable future can be paved, mitigating the ecological footprint of the PBBM.