Liuquan Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Liuquan Wang has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
- Qiang Liu
School of Mechanical Engineering and Automation, Beihang University, Beijing 100191, China
10 shared publications - Pengpeng Sun
School of Mechanical Engineering and Automation, Beihang University, Beijing 100191, China
5 shared publications - Chenxin Zang
School of Mechanical Engineering and Automation, Beihang University, Beijing 100191, China
4 shared publications - Jian Wang
School of Mechanical Engineering and Automation, Beihang University, Beijing 100191, China
4 shared publications - Sanying Zhu
School of Mechanical Engineering and Automation, Beihang University, Beijing 100191, China
3 shared publications - Yanqiang Liu
School of Mechanical Engineering and Automation, Beihang University, Beijing 100191, China
3 shared publications
Latest Publications
- Open Access
Servo State-Based Polynomial Interpolation Model Predictive Control for Enhanced Contouring Control
To further improve machining accuracy under the constrained conditions of multi-axis dynamic response, current research is focusing on the control of CNC machine toolpaths, with contour error as the target. While extant approaches analyze positions solely at PLC sampling nodes, they neglect inter-sample toolpath fluctuations induced by velocity deviations. This paper proposes a servo state-based polynomial interpolation model predictive control that predicts real-time toolpath behavior by utilizing servo axis states. The polynomial interpolation of servo states (e.g., position/velocity feedback) enables high-fidelity toolpath prediction between PLC nodes, overcoming the limitation imposed by the sampling gap. Experimental validation on a five-axis motion platform with S-shaped trajectories demonstrates that, without extending the prediction horizon of the model predictive control method, the proposed method reduces contour error by approximately 20% at the tool tip and 40% in tool orientation, while decreasing contour error fluctuations by around 60% compared to conventional model predictive control method.
Open AccessServo State-Based Polynomial Interpolation Model Predictive Control for Enhanced Contouring Control
To further improve machining accuracy under the constrained conditions of multi-axis dynamic response, current research is focusing on the control of CNC machine toolpaths, with contour error as the target. While extant approaches analyze positions solely at PLC sampling nodes, they neglect inter-sample toolpath fluctuations induced by velocity deviations. This paper proposes a servo state-based polynomial interpolation model predictive control that predicts real-time toolpath behavior by utilizing servo axis states. The polynomial interpolation of servo states (e.g., position/velocity feedback) enables high-fidelity toolpath prediction between PLC nodes, overcoming the limitation imposed by the sampling gap. Experimental validation on a five-axis motion platform with S-shaped trajectories demonstrates that, without extending the prediction horizon of the model predictive control method, the proposed method reduces contour error by approximately 20% at the tool tip and 40% in tool orientation, while decreasing contour error fluctuations by around 60% compared to conventional model predictive control method.
- 15 July 2025
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- Vol. 139 (7-8) , 3311-3326
A dynamic looking-ahead feedrate control method for cutting force adaptive control in dual NURBS interpolation under drive constraints
- 15 July 2025
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- Vol. 139 (7-8) , 3311-3326
A dynamic looking-ahead feedrate control method for cutting force adaptive control in dual NURBS interpolation under drive constraints
- Open Access
Performance Analysis and Prediction of 5G Round-Trip Time Based on the VMD-LSTM Method
With the increasing level of industrial informatization, massive industrial data require real-time and high-fidelity wireless transmission. Although some industrial wireless network protocols have been designed over the last few decades, most of them have limited coverage and narrow bandwidth. They cannot always ensure the certainty of information transmission, making it especially difficult to meet the requirements of low latency in industrial manufacturing fields. The 5G technology is characterized by a high transmission rate and low latency; therefore, it has good prospects in industrial applications. To apply 5G technology to factory environments with low latency requirements for data transmission, in this study, we analyze the statistical performance of the round-trip time (RTT) in a 5G-R15 communication system. The results indicate that the average value of 5G RTT is about 11 ms, which is less than the 25 ms of WIA-FA. We then consider 5G RTT data as a group of time series, utilizing the augmented Dickey–Fuller (ADF) test method to analyze the stability of the RTT data. We conclude that the RTT data are non-stationary. Therefore, firstly, the original 5G RTT series are subjected to first-order differencing to obtain differential sequences with stronger stationarity. Then, a time series analysis-based variational mode decomposition–long short-term memory (VMD-LSTM) method is proposed to separately predict each differential sequence. Finally, the predicted results are subjected to inverse difference to obtain the predicted value of 5G RTT, and a predictive error of 4.481% indicates that the method performs better than LSTM and other methods. The prediction results could be used to evaluate network performance based on business requirements, reduce the impact of instruction packet loss, and improve the robustness of control algorithms. The proposed early warning accuracy metrics for control issues can also be used to indicate when to retrain the model and to indicate the setting of the control cycle. The field of industrial control, especially in the manufacturing industry, which requires low latency, will benefit from this analysis. It should be noted that the above analysis and prediction methods are also applicable to the R16 and R17 versions.
Open AccessPerformance Analysis and Prediction of 5G Round-Trip Time Based on the VMD-LSTM Method
With the increasing level of industrial informatization, massive industrial data require real-time and high-fidelity wireless transmission. Although some industrial wireless network protocols have been designed over the last few decades, most of them have limited coverage and narrow bandwidth. They cannot always ensure the certainty of information transmission, making it especially difficult to meet the requirements of low latency in industrial manufacturing fields. The 5G technology is characterized by a high transmission rate and low latency; therefore, it has good prospects in industrial applications. To apply 5G technology to factory environments with low latency requirements for data transmission, in this study, we analyze the statistical performance of the round-trip time (RTT) in a 5G-R15 communication system. The results indicate that the average value of 5G RTT is about 11 ms, which is less than the 25 ms of WIA-FA. We then consider 5G RTT data as a group of time series, utilizing the augmented Dickey–Fuller (ADF) test method to analyze the stability of the RTT data. We conclude that the RTT data are non-stationary. Therefore, firstly, the original 5G RTT series are subjected to first-order differencing to obtain differential sequences with stronger stationarity. Then, a time series analysis-based variational mode decomposition–long short-term memory (VMD-LSTM) method is proposed to separately predict each differential sequence. Finally, the predicted results are subjected to inverse difference to obtain the predicted value of 5G RTT, and a predictive error of 4.481% indicates that the method performs better than LSTM and other methods. The prediction results could be used to evaluate network performance based on business requirements, reduce the impact of instruction packet loss, and improve the robustness of control algorithms. The proposed early warning accuracy metrics for control issues can also be used to indicate when to retrain the model and to indicate the setting of the control cycle. The field of industrial control, especially in the manufacturing industry, which requires low latency, will benefit from this analysis. It should be noted that the above analysis and prediction methods are also applicable to the R16 and R17 versions.
- Open Access
Rotation-Angle Solution and Singularity Handling of Five-Axis Machine Tools for Dual NURBS Interpolation
Dual NURBS interpolation has been proven an essential technique for high-speed precision machining of complex surfaces. The solution of rotation angles and their derivatives is the basis of kinematic transformation and feedrate optimization in dual NURBS interpolation. The characteristics of the rotation motion of five-axis machine tools with different structures are analyzed. A generic model of dual heads of the vertical five-axis machine tool is established to unify the solution of rotation angles. Then, a generic method for solving the rotation angles and derivatives based on the vector inner product is proposed, and the solution space is analyzed. A singularity handling is given to avoid abrupt rotation angles based on the higher derivatives of the tool orientation vector. The proposed method obtained smooth rotation angles at the singularity points in the cardioid dual NURBS interpolation experiment. It reduced the machining time by 43.3% compared with the simple inverse trigonometric method based on kinematic transformation. Experiment results demonstrate that the proposed method is feasible and effective, and has significant theoretical and practical value for optimizing five-axis CNC machining.
Open AccessRotation-Angle Solution and Singularity Handling of Five-Axis Machine Tools for Dual NURBS Interpolation
Dual NURBS interpolation has been proven an essential technique for high-speed precision machining of complex surfaces. The solution of rotation angles and their derivatives is the basis of kinematic transformation and feedrate optimization in dual NURBS interpolation. The characteristics of the rotation motion of five-axis machine tools with different structures are analyzed. A generic model of dual heads of the vertical five-axis machine tool is established to unify the solution of rotation angles. Then, a generic method for solving the rotation angles and derivatives based on the vector inner product is proposed, and the solution space is analyzed. A singularity handling is given to avoid abrupt rotation angles based on the higher derivatives of the tool orientation vector. The proposed method obtained smooth rotation angles at the singularity points in the cardioid dual NURBS interpolation experiment. It reduced the machining time by 43.3% compared with the simple inverse trigonometric method based on kinematic transformation. Experiment results demonstrate that the proposed method is feasible and effective, and has significant theoretical and practical value for optimizing five-axis CNC machining.
- Open Access
A Parameter Optimization Method for Chatter Stability in Five-Axis Milling
Chatter is a dynamic instability caused by the regeneration of waviness on the workpiece surface and damages the machining efficiency and product quality. For five-axis milling, the chatter stability analysis is more complicated because the cutter-workpiece engagement and the direction of the dynamic cutting force vary along the tool path. This paper presents a parameter optimization method to avoid chatter in the five-axis milling process. The dynamic milling system is modeled in each tool-path segment, and the stability is analyzed by introducing the semi-discretization method to solve the delay differential equation. In addition, the multi-frequency solution to the stability prediction for the multiple degrees of freedom spindle-cutter system and workpiece system is presented. Considering the speed and acceleration constraints of the spindle system and the feeding system, the spindle speed optimization iterative method is applied based on the chatter prediction. The verification experiment is conducted on the five-axis milling of the S-curve part to show the predictive accuracy of the chatter model and the validity of the proposed optimization method.
Open AccessA Parameter Optimization Method for Chatter Stability in Five-Axis Milling
Chatter is a dynamic instability caused by the regeneration of waviness on the workpiece surface and damages the machining efficiency and product quality. For five-axis milling, the chatter stability analysis is more complicated because the cutter-workpiece engagement and the direction of the dynamic cutting force vary along the tool path. This paper presents a parameter optimization method to avoid chatter in the five-axis milling process. The dynamic milling system is modeled in each tool-path segment, and the stability is analyzed by introducing the semi-discretization method to solve the delay differential equation. In addition, the multi-frequency solution to the stability prediction for the multiple degrees of freedom spindle-cutter system and workpiece system is presented. Considering the speed and acceleration constraints of the spindle system and the feeding system, the spindle speed optimization iterative method is applied based on the chatter prediction. The verification experiment is conducted on the five-axis milling of the S-curve part to show the predictive accuracy of the chatter model and the validity of the proposed optimization method.
- Open Access
- 15 December 2022
- Published by MDPI AG in Micromachines
- Vol. 13 (12) , 2228
Depth Model and 5-Axis Variable-Angle Laser Engraving Experiment Based on the Energy Conservation Principle
To ensure the consistency of laser engraving depth in chemical milling, the precise control of 5-axis variable-angle laser engraving was the focus of research. Based on the energy conservation principle, the depth model of 5-axis variable-angle laser engraving is established, and the relationships among the laser engraving depth, laser power, scanning velocity, and beam axis angle are proposed. A depth-constraint real-time adaptive control method of laser power is proposed considering the variable scanning velocity and beam axis angles. The depth model parameters are identified by an orthogonal experiment, and a variable-angle laser engraving experiment with adaptive control of laser power is carried out. The coefficient of determination of the proposed depth model is 0.977, which means that the engraving depth model established in this paper predicts the engraving depth effectively and reliably. The depth-constraint adaptive control method of laser power obtains stable and uniform machining results under abrupt changes in scanning velocity and beam axis angles.
- 15 December 2022
- Published by MDPI AG in Micromachines
- Vol. 13 (12) , 2228
Open AccessDepth Model and 5-Axis Variable-Angle Laser Engraving Experiment Based on the Energy Conservation Principle
To ensure the consistency of laser engraving depth in chemical milling, the precise control of 5-axis variable-angle laser engraving was the focus of research. Based on the energy conservation principle, the depth model of 5-axis variable-angle laser engraving is established, and the relationships among the laser engraving depth, laser power, scanning velocity, and beam axis angle are proposed. A depth-constraint real-time adaptive control method of laser power is proposed considering the variable scanning velocity and beam axis angles. The depth model parameters are identified by an orthogonal experiment, and a variable-angle laser engraving experiment with adaptive control of laser power is carried out. The coefficient of determination of the proposed depth model is 0.977, which means that the engraving depth model established in this paper predicts the engraving depth effectively and reliably. The depth-constraint adaptive control method of laser power obtains stable and uniform machining results under abrupt changes in scanning velocity and beam axis angles.
- Open Access
- 12 March 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (6) , 2914
Study on Model and Experimental of Laser Scribing Parameter of Maskant in Chemical Milling for Aerospace Applications
In order to solve the problems of multiple process parameters, difficult control and high process requirements in laser first/second scribing of aerospace chemical milling thin-wall parts, a laser scribing depth model based on thermal energy balance was established, and the relationship between laser power and speed was established with scribing depth as a target. Using AC850 laser scribing maskant as coating material, the effects of laser power, scribing speed, laser frequency, forward angle and side slope angle on the scribing depth were studied by single factor experiment. Experimental results show that the theoretical model is in good agreement with experimental data. The laser scribing depth is positively proportional to the laser power and inversely proportional to the laser speed and has little relationship with the laser frequency. The predicted accuracy of the mathematical equations regarding the laser power density and scribing depth, calculated by the laser power, speed and scribing depths experimental data, are 88.53% and 90.79%. The laser scribing depth at a forward angle of 6° and a side slope angle of 7° is deeper compared with the vertical incident scribing depth, and the angle is also the recommended angle of laser scribing. Based on the simplified regression model, the laser scribing depth model can be directly used in the laser NC system to realize the adaptive adjustment and accurate control of laser energy according to the actual laser speed.
- 12 March 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (6) , 2914
Open AccessStudy on Model and Experimental of Laser Scribing Parameter of Maskant in Chemical Milling for Aerospace Applications
In order to solve the problems of multiple process parameters, difficult control and high process requirements in laser first/second scribing of aerospace chemical milling thin-wall parts, a laser scribing depth model based on thermal energy balance was established, and the relationship between laser power and speed was established with scribing depth as a target. Using AC850 laser scribing maskant as coating material, the effects of laser power, scribing speed, laser frequency, forward angle and side slope angle on the scribing depth were studied by single factor experiment. Experimental results show that the theoretical model is in good agreement with experimental data. The laser scribing depth is positively proportional to the laser power and inversely proportional to the laser speed and has little relationship with the laser frequency. The predicted accuracy of the mathematical equations regarding the laser power density and scribing depth, calculated by the laser power, speed and scribing depths experimental data, are 88.53% and 90.79%. The laser scribing depth at a forward angle of 6° and a side slope angle of 7° is deeper compared with the vertical incident scribing depth, and the angle is also the recommended angle of laser scribing. Based on the simplified regression model, the laser scribing depth model can be directly used in the laser NC system to realize the adaptive adjustment and accurate control of laser energy according to the actual laser speed.
- Open Access
- 18 February 2022
- Published by MDPI AG in Micromachines
- Vol. 13 (2) , 323
Research Status and Prospect of Laser Scribing Process and Equipment for Chemical Milling Parts in Aviation and Aerospace
Laser scribing in chemical milling is an important process which can effectively improve the precision and efficiency of chemical milling, and is of great significance to improve the thrust–weight ratio and manufacturing efficiency of aviation and aerospace parts. According to the scribing requirements in chemical milling for aviation and aerospace parts, the process and mechanism of laser scribing were studied and the influence of different process parameters for the quality of laser scribing was analyzed. Based on the review of related research literature, the laser scribing process, the ablation mechanism and technology of different materials and the selective laser removal process for “laser–coating–substrate” are summarized and discussed. Based on the requirements of high-precision laser scribing on complex surfaces, the current situation of laser scribing equipment is summarized. Finally, the practical challenges and key technical problems for the laser scribing process are summarized, and the application and development of laser scribing in aerospace manufacturing are prospected.
- 18 February 2022
- Published by MDPI AG in Micromachines
- Vol. 13 (2) , 323
Open AccessResearch Status and Prospect of Laser Scribing Process and Equipment for Chemical Milling Parts in Aviation and Aerospace
Laser scribing in chemical milling is an important process which can effectively improve the precision and efficiency of chemical milling, and is of great significance to improve the thrust–weight ratio and manufacturing efficiency of aviation and aerospace parts. According to the scribing requirements in chemical milling for aviation and aerospace parts, the process and mechanism of laser scribing were studied and the influence of different process parameters for the quality of laser scribing was analyzed. Based on the review of related research literature, the laser scribing process, the ablation mechanism and technology of different materials and the selective laser removal process for “laser–coating–substrate” are summarized and discussed. Based on the requirements of high-precision laser scribing on complex surfaces, the current situation of laser scribing equipment is summarized. Finally, the practical challenges and key technical problems for the laser scribing process are summarized, and the application and development of laser scribing in aerospace manufacturing are prospected.
- Open Access
Formation Control of Dual Auto Guided Vehicles Based on Compensation Method in 5G Networks
With commercial application of 5G networks, many researchers have started paying attention to real-time control in 5G networks. This paper focuses on dual auto guided vehicles collaborative transport scenarios and designs a formation control system in current commercial 5G networks. Firstly, the structure of the 5G network researched in this paper is introduced. Then the round-trip time of 5G networks is measured and analyzed. The result shows that although the 5G round-trip time has randomness, it is mainly concentrated in 19 ± 3 ms, and the jitter mainly in 0 ± 3 ms. The Kalman filter is applied to estimate the transmission delay and experiment result shows the effectiveness of the estimation. Furthermore, the total delay including transmission delay and execution delay in control system is discussed. After establishing the AGV kinematic and formation model, complete control system based on compensation method is proposed. Finally, an experiment is carried out. Compared to the result without formation control, maximum distance error is reduced by 82.61% on average, while maximum angle error 45.91% on average. The result shows the effectiveness of the control system in formation maintaining in 5G network.
Open AccessFormation Control of Dual Auto Guided Vehicles Based on Compensation Method in 5G Networks
With commercial application of 5G networks, many researchers have started paying attention to real-time control in 5G networks. This paper focuses on dual auto guided vehicles collaborative transport scenarios and designs a formation control system in current commercial 5G networks. Firstly, the structure of the 5G network researched in this paper is introduced. Then the round-trip time of 5G networks is measured and analyzed. The result shows that although the 5G round-trip time has randomness, it is mainly concentrated in 19 ± 3 ms, and the jitter mainly in 0 ± 3 ms. The Kalman filter is applied to estimate the transmission delay and experiment result shows the effectiveness of the estimation. Furthermore, the total delay including transmission delay and execution delay in control system is discussed. After establishing the AGV kinematic and formation model, complete control system based on compensation method is proposed. Finally, an experiment is carried out. Compared to the result without formation control, maximum distance error is reduced by 82.61% on average, while maximum angle error 45.91% on average. The result shows the effectiveness of the control system in formation maintaining in 5G network.
- Open Access
A Cybernetics-based Dynamic Infection Model for Analyzing SARS-COV-2 Infection Stability and Predicting Uncontrollable Risks
Since December 2019, COVID-19 has raged in Wuhan and subsequently all over China and the world. We propose a Cybernetics-based Dynamic Infection Model (CDIM) to the dynamic infection process with a probability distributed incubation delay and feedback principle. Reproductive trends and the stability of the SARS-COV-2 infection in a city can then be analyzed, and the uncontrollable risks can be forecasted before they really happen. The infection mechanism of a city is depicted using the philosophy of cybernetics and approaches of the control engineering. Distinguished with other epidemiological models, such as SIR, SEIR, etc., that compute the theoretical number of infected people in a closed population, CDIM considers the immigration and emigration population as system inputs, and administrative and medical resources as dynamic control variables. The epidemic regulation can be simulated in the model to support the decision-making for containing the outbreak. City case studies are demonstrated for verification and validation.
Open AccessA Cybernetics-based Dynamic Infection Model for Analyzing SARS-COV-2 Infection Stability and Predicting Uncontrollable Risks
Since December 2019, COVID-19 has raged in Wuhan and subsequently all over China and the world. We propose a Cybernetics-based Dynamic Infection Model (CDIM) to the dynamic infection process with a probability distributed incubation delay and feedback principle. Reproductive trends and the stability of the SARS-COV-2 infection in a city can then be analyzed, and the uncontrollable risks can be forecasted before they really happen. The infection mechanism of a city is depicted using the philosophy of cybernetics and approaches of the control engineering. Distinguished with other epidemiological models, such as SIR, SEIR, etc., that compute the theoretical number of infected people in a closed population, CDIM considers the immigration and emigration population as system inputs, and administrative and medical resources as dynamic control variables. The epidemic regulation can be simulated in the model to support the decision-making for containing the outbreak. City case studies are demonstrated for verification and validation.