YCYoann Corre

Yoann Corre

*This is an algorithmically generated author record based on publicly available information.

Yoann Corre has a total of 37 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Uplink and Downlink Slice-Aware OFDMA Resource Allocation for Smart Factory Networks

    by Regina Ochonu, Josep Vidal, Gurjot Singh Bhatia, Yoann Corre

    Smart factories require wireless networks capable of supporting diverse applications with stringent and heterogeneous quality of service (QoS) demands. Network slicing enables this by virtualizing resources into isolated slices optimized for specific service types. To effectively manage scarce radio resources and ensure seamless support for mixed-traffic industrial users, this paper proposes a suite of slice-aware resource allocation (RA) frameworks encompassing power and subchannel (SC) allocation for both uplink (UL) and downlink (DL) in industrial time-division duplexing (TDD)-orthogonal frequency division multiple access (OFDMA) networks. We transform diverse QoS constraints—latency, reliability, jitter, and throughput—into unified rate expressions enabling tractable convex optimization across three slice types: capacity limited (CL) for best-effort traffic, ultra-reliable low-latency communication (URLLC) for mission-critical control, and time sensitive (TS) for deterministic periodic traffic. The framework incorporates dynamic TDD adaptation for asymmetric traffic patterns and admission control to manage congestion. The effectiveness of the proposed algorithms in reducing energy consumption while guaranteeing slice-specific QoS is validated using realistic industrial ray-tracing channels and extensive simulations.

  • Open Access

    5G Realistic Radio Channel Models for FRMCS Deployment in Railway Environments

    by Marion Berbineau, Ali Sabra, Patrice Pajusco, J. Amghar, Raffaele D’eRrico, Jean-Christophe Sibel, Yoann Corre, Stéphane Guillemaut

    The Future Railway Mobile Communication systems (FRMCS) is the new system under development, based on 5G-NR, that will replace the GSM-R standard. Its deployment will require the design of new radio engineering tools, which in particular rely on new 3D radio channel models to validate the performance of proposed networking technologies under high-speed conditions, and to perform future radio-planning tasks. The 5GREMORA project aims at developing new measurement-based 3D radio channel models for railways, and demonstrating how new scheduling algorithms can be assessed with those models. The paper outlines the main ambitions of the project; and presents the preliminary results obtained so far.


  • Open Access

    The 5G-RACOM Project: 5G for Resilient and Green Rail COMmunications

    by B. Holfeld, R. Fritzsche, T. Karabinos, G. Boistault, M. Berbineau, U. Geier, O. Eudes, A. Ende, K. Mößner, T. Bauschert, et al.

    The German-French innovation project 5G-RACOM is investigating solutions for the efficient, reliable and sustainable use of the Future Railway Mobile Communication System (FRMCS) and the associated frequency spectrum. FRMCS is foreseen to be the successor to GSM-R and will ensure high-performance and real-time wireless communication between trains and infrastructure based on 5G technologies. FRMCS will deliver the basis for the digitalization and automation of railway operations and is, hence, fundamental to increase rail network capacity. 5G-RACOM has three objectives for a spectrum-efficient, a resilient and a robust FRMCS system design: (1) radio channel modeling studies at 900 MHz and 1900 MHz in different railroad operational scenarios including high-speed lines, tunnels, rural areas, (2) evaluation of the coexistence of GSM-R and FRMCS at 900 MHz and prototype development for technology migration, and (3) solutions for hybrid FRMCS networks in which the private FRMCS network is complemented by public mobile networks, e.g., as a fallback layer or capacity enhancement.


  • Reconfigurable Intelligent Surfaces in Factory Environments: Channel Modeling and Use-Case Analysis

    by Gurjot Singh Bhatia, Yoann Corre, Thierry Tenoux, Marco Di Renzo

    Reconfigurable intelligent surface (RIS) is a breakthrough technology in wireless communications, enabling dynamic control over the propagation environment to enhance signal quality and spectral efficiency. This article introduces a ray-tracing (RT) approach for simulating the impact of RIS technology in realistic scenarios. The fundamental aspects of the RIS model are validated against published measurements. The key novelty is the integration of the validated radar cross-section based RIS model into an RT tool and ensuring compatibility with any propagation range, allowing antennas to be positioned in either near-field (NF) or far-field (FF) conditions relative to the RIS. The model also uniquely addresses practical aspects, such as phase quantization (PQ) and wide-band response, essential for assessing RIS deployments in real-world mobile applications. This article evaluates RIS-assisted coverage enhancement for private industrial networks by applying RT to a complex factory scenario and conducting system-level simulations at 3.7 GHz and 27 GHz. The results underscore RIS’s ability to significantly extend coverage and improve link performance in challenging propagation conditions.


  • Investigating sub-THz PHY layer for future high-data-rate wireless backhaul

    by Grégory Gougeon, Yoan Corre, Mohammed Zahid Aslam, Simon Bicaïs, Jean-Baptiste Doré

  • Quasi-Deterministic Channel Propagation Model for an Urban Environment at 28 GHz

    by Neeraj Varshney, Jian Wang, Chiehping Lai, Camillo Gentile, Romain Charbonnier, Yoann Corre

    We reduced the parameters of the Quasi-Deterministic channel propagation model, recently adopted by the IEEE 802.11ay task group for next-generation Wi-Fi at millimeter-wave (mmWave), from measurements collected in an urban environment with our 28 GHz switched-array channel sounder. In the process-as a novel contribution-we extended the clustering of channel rays from the conventional delay and angle domains to the location domain of the receiver, over which the measurements were collected. By comparing channel realizations from the model to realizations from a leading commercial ray-tracer, we demonstrated that the model effects no detriment to accuracy while maintaining the benefit of significantly reduced complexity.


  • Calibration of Ray-Tracing With Diffuse Scattering Against 28-GHz Directional Urban Channel Measurements

    by Romain Charbonnier, Chiehping Lai, Thierry Tenoux, Derek Caudill, Gregory Gougeon, Jelena Senic, Camillo Gentile, Yoann Corre, Jack Chuang, Nada Golmie

    This paper describes the calibration of the Volcano ray-tracing engine against channel measurements collected in an urban environment with a state-of-the-art 28-GHz directional channel sounder. A discrete set of rays, representing planar wavefronts propagating between the transmitter and receiver, were extracted from the measurements and characterized in path gain, delay, and 3D angle-of-arrival through super-resolution techniques, with average errors of only 1.2 dB, 0.55 ns, and 2.05° respectively. The extracted rays were then tracked over space as the receiver, mounted on a mobile rover equipped with military-grade GPS, traversed 66 m while amassing a total of 488 channel acquisitions. The tracked rays were then mapped to rays predicted from ray-tracing, originating through specular reflection or diffuse scattering from ambient objects. The mapping enabled object-specific calibration, namely calibrating distinct diffuse-scattering models for buildings, vehicles, and foliage. To our knowledge, this is the first effort to calibrate ray-tracing with object-specific diffuse scattering models against rays individually mapped in the path gain, delay, angle, and space domains. Results, in terms of calibrated ray-tracing parameters, fit-error statistics, and lessons learned, are included. Our chief finding was that, while most papers on millimeter-wave ray-tracing do not even consider diffuse scattering, it accounted for 20% of the total received power, whereas diffraction accounted for less than 1%.


  • Open Access

    Simulated Propagation Properties for Future Outdoor sub-THz Networks

    by Mohammed Zahid Aslam, Yoann Corre

    The sub-THz spectrum is today one of the most promising technologies to provide large network capacities beyond the 5G era. The modelling of the propagation channel is needed for research and test, but the channel understanding is still limited. One of the key challenges at these high frequencies is the large propagation loss, in particular the impact of vegetation on outdoor links. In this paper, a ray-based tool validated at millimeter-wave frequencies is used to analyze and characterize the outdoor propagation channel at 150 GHz. Different environments like urban canyon, residential and a wide main street are considered and accurately modeled with LiDAR data, in order to assess the propagation properties for several outdoor antenna configurations: mesh backhaul, Fixed Wireless Access (FWA) and mobiles access. Such simulation studies in conjunction with measurements can lead to better channel understanding. Interesting perspectives on the validation of subTHz use cases and deployment strategies can be formed.