Hajime Hojo
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Hajime Hojo has a total of 185 co-authors. Here are the top co-authors by number of shared publications:
- Hisahiro Einaga
Kyushu University
20 shared publications - Masaki Azuma
Kanagawa Institute of Industrial Science and Technology, 705-1 Shimoimaizumi, Ebina, Kanagawa 243-0435, Japan
6 shared publications Chen Zhu
Department of Molecular and Material Sciences, Interdisciplinary Graduate School of Engineering Sciences, Kyushu University, 6-1, Kasugakoen, Kasuga 816-8580, Fukuoka, Japan
3 shared publicationsHisahiro Einaga
3 shared publicationsKeisuke Shimizu
Laboratory for Materials and Structures, Tokyo Institute of Technology, Yokohama 226-8503, Japan
3 shared publications- Koji Fujita
Kyoto University
3 shared publications
Latest Publications
- 30 July 2026
- Published by American Chemical Society (ACS) in ACS Catalysis
- Vol. 16 (16) , 16029-16040
Disentangling Structural and Electronic Roles of Pyridinic- and Pyrrolic-N in Ni-Catalyzed Hydrogenolysis of Aryl Ether Bonds
Understanding how distinct nitrogen functionalities regulate metal sites remains a central challenge in the rational design of carbon-supported catalysts for hydrogenolysis reactions. Here, we disentangled the structural and electronic roles of pyridinic-N and pyrrolic-N in nitrogen-doped carbon-supported Ni catalysts by systematically tuning nitrogen speciation and investigating the hydrogenolysis of C–O bonds in diphenyl ether (DPE), a representative lignin-derived aryl ether. An optimized nitrogen-doped carbon-supported Ni catalyst (denoted as Ni/NC35) achieved complete DPE conversion under mild conditions (180 °C, 0.5 MPa H2, 1 h) with high selectivity toward cyclohexane and cyclohexanol. Comprehensive characterization and DFT calculations revealed that the appropriate incorporation of pyridinic-N and pyrrolic-N strengthened the metal–support interaction and effectively suppressed Ni nanoparticle aggregation, while synergistically regulating the electronic structure of Ni through both direct Ni–N coordination and non-coordinated modulation of neighboring Ni atoms, thereby promoting the formation of highly active electron-deficient Ni species. These electron-deficient Ni sites led to a modest increase in the energy barrier of C–O bond cleavage but significantly lowered the barriers for H2 dissociation and benzene formation, thereby enhancing the catalytic activity for DPE hydrogenolysis. The findings were consistent with the significantly higher activity of DPE hydrogenolysis and benzene hydrogenation over Ni/NC35 compared to the undoped catalyst (Ni/NC0). This work elucidates the key role of pyridinic-N and pyrrolic-N in structural optimization and electronic regulation of Ni-based catalysts and provides clear design principles for engineering non-noble metal catalysts for selective hydrogenolysis of lignin-derived aryl ethers.
- 30 July 2026
- Published by American Chemical Society (ACS) in ACS Catalysis
- Vol. 16 (16) , 16029-16040
Disentangling Structural and Electronic Roles of Pyridinic- and Pyrrolic-N in Ni-Catalyzed Hydrogenolysis of Aryl Ether Bonds
Understanding how distinct nitrogen functionalities regulate metal sites remains a central challenge in the rational design of carbon-supported catalysts for hydrogenolysis reactions. Here, we disentangled the structural and electronic roles of pyridinic-N and pyrrolic-N in nitrogen-doped carbon-supported Ni catalysts by systematically tuning nitrogen speciation and investigating the hydrogenolysis of C–O bonds in diphenyl ether (DPE), a representative lignin-derived aryl ether. An optimized nitrogen-doped carbon-supported Ni catalyst (denoted as Ni/NC35) achieved complete DPE conversion under mild conditions (180 °C, 0.5 MPa H2, 1 h) with high selectivity toward cyclohexane and cyclohexanol. Comprehensive characterization and DFT calculations revealed that the appropriate incorporation of pyridinic-N and pyrrolic-N strengthened the metal–support interaction and effectively suppressed Ni nanoparticle aggregation, while synergistically regulating the electronic structure of Ni through both direct Ni–N coordination and non-coordinated modulation of neighboring Ni atoms, thereby promoting the formation of highly active electron-deficient Ni species. These electron-deficient Ni sites led to a modest increase in the energy barrier of C–O bond cleavage but significantly lowered the barriers for H2 dissociation and benzene formation, thereby enhancing the catalytic activity for DPE hydrogenolysis. The findings were consistent with the significantly higher activity of DPE hydrogenolysis and benzene hydrogenation over Ni/NC35 compared to the undoped catalyst (Ni/NC0). This work elucidates the key role of pyridinic-N and pyrrolic-N in structural optimization and electronic regulation of Ni-based catalysts and provides clear design principles for engineering non-noble metal catalysts for selective hydrogenolysis of lignin-derived aryl ethers.
- 29 May 2026
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 9 (11) , 7059-7071
Microwave-Induced Self-Activation of LaNiO 3 -Derived Catalysts for Susceptor-Free Dry Reforming of Methane
- 29 May 2026
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 9 (11) , 7059-7071
Microwave-Induced Self-Activation of LaNiO 3 -Derived Catalysts for Susceptor-Free Dry Reforming of Methane
- 27 February 2026
- Published by Royal Society of Chemistry (RSC) in Dalton Transactions
- Vol. 55 (12) , 4802-4812
Structural transformation and redox chemistry of Pd/CeO 2 during SO 2 -induced sulfurization: an in situ XAFS study
In situ XAFS revealed structural changes of Pd/CeO 2 under SO 2 flow, showing that Pd loading promotes the reduction of Ce 4+ to Ce 3+ in the ceria support.
- 27 February 2026
- Published by Royal Society of Chemistry (RSC) in Dalton Transactions
- Vol. 55 (12) , 4802-4812
Structural transformation and redox chemistry of Pd/CeO 2 during SO 2 -induced sulfurization: an in situ XAFS study
In situ XAFS revealed structural changes of Pd/CeO 2 under SO 2 flow, showing that Pd loading promotes the reduction of Ce 4+ to Ce 3+ in the ceria support.
- 19 February 2026
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 130 (9) , 3526-3537
Morphology and Defect Engineering of MoS 2 for Enhanced Microwave Heating: Superior Performance of Nanoflower Architecture
- 19 February 2026
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 130 (9) , 3526-3537
Morphology and Defect Engineering of MoS 2 for Enhanced Microwave Heating: Superior Performance of Nanoflower Architecture
- 23 January 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (4) , 4557-4567
Switchable Polarization in an A-Site Deficient Perovskite through Vacancy and Cation Engineering
While defects are unavoidable in crystals and often detrimental to material performance, they can be a key ingredient for inducing functionalities when tailored. Here, we show that an A-site-deficient perovskite Y1/3TaO3 exhibits switching-like polarization response at room temperature in the Pb21m phase, enabled by ordered vacancies coupled with TaO6 octahedral rotations. Defect-ordered perovskites are frequently trapped in centrosymmetric incommensurate states due to competing structural instabilities; we circumvent this by favoring rotational over off-centering instability through compositional selection. Unlike canonical improper ferroelectrics that are ferrielectric, the vanishing dipoles on vacancy layers in Y1/3TaO3 allow for a net ferroelectric alignment of local dipoles, resulting in enhanced polarization. Upon heating, Y1/3TaO3 transforms to a paraelectric incommensurate phase at ≃750 K, whose atomic arrangement mirrors the domain topology observed in hybrid improper ferroelectrics. Superspace analysis of the modulated phase reveals a route to improve room-temperature polarization, achieved through epitaxial strain, as confirmed by our lattice-dynamics calculations. This defect-ordering strategy should be generalizable to other improper ferroelectrics, including magnetoelectric multiferroics, providing a pathway to amplify otherwise limited macroscopic polarization.
- 23 January 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (4) , 4557-4567
Switchable Polarization in an A-Site Deficient Perovskite through Vacancy and Cation Engineering
While defects are unavoidable in crystals and often detrimental to material performance, they can be a key ingredient for inducing functionalities when tailored. Here, we show that an A-site-deficient perovskite Y1/3TaO3 exhibits switching-like polarization response at room temperature in the Pb21m phase, enabled by ordered vacancies coupled with TaO6 octahedral rotations. Defect-ordered perovskites are frequently trapped in centrosymmetric incommensurate states due to competing structural instabilities; we circumvent this by favoring rotational over off-centering instability through compositional selection. Unlike canonical improper ferroelectrics that are ferrielectric, the vanishing dipoles on vacancy layers in Y1/3TaO3 allow for a net ferroelectric alignment of local dipoles, resulting in enhanced polarization. Upon heating, Y1/3TaO3 transforms to a paraelectric incommensurate phase at ≃750 K, whose atomic arrangement mirrors the domain topology observed in hybrid improper ferroelectrics. Superspace analysis of the modulated phase reveals a route to improve room-temperature polarization, achieved through epitaxial strain, as confirmed by our lattice-dynamics calculations. This defect-ordering strategy should be generalizable to other improper ferroelectrics, including magnetoelectric multiferroics, providing a pathway to amplify otherwise limited macroscopic polarization.
- Open Access
LDH-Derived Preparation of Ce-Modified MnCoAl Layered Double Oxides for NH3-SCR: Performance and Reaction Process Study
A series of novel Ce-modified MnCoAl layered double oxides (Ce/MCA LDOs) were prepared using solvothermal and impregnation methods for NH3-SCR denitration. Various characterizations, such as X-ray diffraction (XRD), scanning electron microscope (SEM), X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), and H2 temperature-programmed reduction (H2-TPR) were used to investigate their structural properties and the mechanism of ammonia selective catalytic reduction (NH3-SCR). The incorporation of Ce was found to effectively integrate into the LDO framework and enhance the catalytic activity over a wide temperature window. Moreover, the thermal stability and resistance of H2O and SO2 were evaluated. In situ DRIFTS studies revealed that the reaction follows both the “Langmuir–Hinshelwood” (L–H) and “Eley–Rideal” (E–R) mechanisms. This work provides systematic insights into the design of LDO-based catalysts, demonstrating their potential for practical application in denitration.
Open AccessLDH-Derived Preparation of Ce-Modified MnCoAl Layered Double Oxides for NH3-SCR: Performance and Reaction Process Study
A series of novel Ce-modified MnCoAl layered double oxides (Ce/MCA LDOs) were prepared using solvothermal and impregnation methods for NH3-SCR denitration. Various characterizations, such as X-ray diffraction (XRD), scanning electron microscope (SEM), X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), and H2 temperature-programmed reduction (H2-TPR) were used to investigate their structural properties and the mechanism of ammonia selective catalytic reduction (NH3-SCR). The incorporation of Ce was found to effectively integrate into the LDO framework and enhance the catalytic activity over a wide temperature window. Moreover, the thermal stability and resistance of H2O and SO2 were evaluated. In situ DRIFTS studies revealed that the reaction follows both the “Langmuir–Hinshelwood” (L–H) and “Eley–Rideal” (E–R) mechanisms. This work provides systematic insights into the design of LDO-based catalysts, demonstrating their potential for practical application in denitration.
- Open Access
- 26 November 2025
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 18 (1) , 328-335
Distribution of oxygen vacancies and their impact on the charge state of Pt on TiO 2
Pt supported on TiO 2 (101) becomes negatively charged due to oxygen vacancies beneath nanoparticles. Vacancy-driven electron transfer offers design guidelines for tuning metal–support interactions.
- 26 November 2025
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 18 (1) , 328-335
Open AccessDistribution of oxygen vacancies and their impact on the charge state of Pt on TiO 2
Pt supported on TiO 2 (101) becomes negatively charged due to oxygen vacancies beneath nanoparticles. Vacancy-driven electron transfer offers design guidelines for tuning metal–support interactions.
- Open Access
- 21 October 2025
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 27 (44) , 23802-23812
Understanding the microwave heating properties of La–Ce–Ni oxides based on structural, dielectric, and conductive analysis
Strong CeO 2 –LaNiO 3 interactions induced structural distortions and modified dielectric properties, which predominantly contributed to the enhanced heating performance under microwave electric fields.
- 21 October 2025
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 27 (44) , 23802-23812
Open AccessUnderstanding the microwave heating properties of La–Ce–Ni oxides based on structural, dielectric, and conductive analysis
Strong CeO 2 –LaNiO 3 interactions induced structural distortions and modified dielectric properties, which predominantly contributed to the enhanced heating performance under microwave electric fields.
- Open Access
- 10 July 2025
- Published by Wiley in Advanced Science
- Vol. 12 (36) , e08554
Direct Visualization of Surface Structure and Charge States of Ceria‐Supported Gold Catalysts Under Redox Conditions
Observing the surface structure and charge dynamics of catalysts during catalytic reactions is crucial for elucidating reaction mechanisms. However, nanoscale characterization of the catalyst structure and charge states in the presence of reactive gases presents experimental challenges. Here, the structures and charge states of a gold nanoparticle (NP) are directly visualized on ceria during redox cycles using electron holography, a method related to transmission electron microscopy. The introduction of oxidizing O 2 gas to the microscope led to structural changes on the NP surface and decrease the intrinsic negative charge of the NP. Conversely, under reducing H 2 gas, the surface structure and charge state of the NP remained almost unchanged compared to those in vacuum. Systematic analysis revealed that the injection and removal of O 2 gas caused reversible changes in the charge state of the NP within the range of a few electrons. The effect of O 2 gas on charging of the NP is confirmed by first‐principles calculations. These findings demonstrate the potential of electron holography in gas environments for advancing the understanding the reaction mechanisms on heterogeneous catalysts.
- 10 July 2025
- Published by Wiley in Advanced Science
- Vol. 12 (36) , e08554
Open AccessDirect Visualization of Surface Structure and Charge States of Ceria‐Supported Gold Catalysts Under Redox Conditions
Observing the surface structure and charge dynamics of catalysts during catalytic reactions is crucial for elucidating reaction mechanisms. However, nanoscale characterization of the catalyst structure and charge states in the presence of reactive gases presents experimental challenges. Here, the structures and charge states of a gold nanoparticle (NP) are directly visualized on ceria during redox cycles using electron holography, a method related to transmission electron microscopy. The introduction of oxidizing O 2 gas to the microscope led to structural changes on the NP surface and decrease the intrinsic negative charge of the NP. Conversely, under reducing H 2 gas, the surface structure and charge state of the NP remained almost unchanged compared to those in vacuum. Systematic analysis revealed that the injection and removal of O 2 gas caused reversible changes in the charge state of the NP within the range of a few electrons. The effect of O 2 gas on charging of the NP is confirmed by first‐principles calculations. These findings demonstrate the potential of electron holography in gas environments for advancing the understanding the reaction mechanisms on heterogeneous catalysts.
- Open Access
- 12 June 2025
- Published by Royal Society of Chemistry (RSC) in Industrial Chemistry & Materials
- Vol. 4 (2) , 226-236
Kinetic advantages of microwave activation in the dry reforming of methane: insights gained by SSITKA
Utilising unexploited methane through its reaction with CO2 via Dry Reforming of Methane (DRM) has attracted attention. However, there are challenges related to the catalyst deactivation and energy consumption due to the highly endothermic nature; thus, microwave activation has been proposed to increase the energy efficiency by directly heating the catalyst with minimized heating of the reactor. In this study, we clarify the advantages of microwave heating through more reactive coke formation during the reaction as well as enhanced reactivity under microwave condition compared to the conventional resistive heating. For the latter, Steady-State Isotopic Transient Kinetic Analysis (SSITKA) was conducted to gain mechanistic insights, suggesting that microwave heating accelerated CO generation steps. This study shows that the microwave activation can be advantageous in terms of reaction kinetics for DRM.
- 12 June 2025
- Published by Royal Society of Chemistry (RSC) in Industrial Chemistry & Materials
- Vol. 4 (2) , 226-236
Open AccessKinetic advantages of microwave activation in the dry reforming of methane: insights gained by SSITKA
Utilising unexploited methane through its reaction with CO2 via Dry Reforming of Methane (DRM) has attracted attention. However, there are challenges related to the catalyst deactivation and energy consumption due to the highly endothermic nature; thus, microwave activation has been proposed to increase the energy efficiency by directly heating the catalyst with minimized heating of the reactor. In this study, we clarify the advantages of microwave heating through more reactive coke formation during the reaction as well as enhanced reactivity under microwave condition compared to the conventional resistive heating. For the latter, Steady-State Isotopic Transient Kinetic Analysis (SSITKA) was conducted to gain mechanistic insights, suggesting that microwave heating accelerated CO generation steps. This study shows that the microwave activation can be advantageous in terms of reaction kinetics for DRM.