Ilya A. Gulyaev Gulyaev
Research Subjects
Ilya A. Gulyaev Gulyaev has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
E. Ronnov
FSBEI HE «Volga State University of Water Transport
2 shared publications- Evgeniy P. Ronnov
Volga State University of Water Transport
2 shared publications - Yuriy A. Kochnev
Volga State University of Water Transport Nizhny Novgorod Russia
2 shared publications Евгений Павлович Роннов
Волжский государственный университет водного транспорта, Нижний Новгород,Ю Россия
2 shared publicationsEvgeniy P. Ronnov
1 shared publicationEvgeniy P. Ronnov Ronnov
Волжский государственный университет водного транспорта, Нижний Новгород,Ю Россия
1 shared publication
Latest Publications
- 1 January 2023
- Published by Maritime News of Russia in Transport Business of Russia
- No. 1,p. 279-282
SPECIAL ASPECTS OF DESIGN AND REGULATORY SUPPORT OF WORKS ON REFITTING OF NON-SELF-PROPELLED VESSELS WHEN SOLVING SINGLE TECHNOLOGICAL TASKS
- 1 January 2023
- Published by Maritime News of Russia in Transport Business of Russia
- No. 1,p. 279-282
SPECIAL ASPECTS OF DESIGN AND REGULATORY SUPPORT OF WORKS ON REFITTING OF NON-SELF-PROPELLED VESSELS WHEN SOLVING SINGLE TECHNOLOGICAL TASKS
- Open Access
- 18 September 2022
- Published by Volga State University of Water Transport in Russian Journal of Water Transport
- No. 72,p. 15-29
Influence of optimization model parameters on the main characteristics of the architectural and structural type of the combined vessel
Transportation of liquid cargo on specialized vessels has the disadvantage of not being able to reload. This is primarily due to the impossibility of placing dry cargo on the return trip in cargo tanks, both from the point of view of the need to clean up the latter, and from the point of view of access to cargo tanks with bulky or bulk cargo. This problem can be solved with the use of specialized cargo combined vessels, which have separate cargo spaces for dry cargo back loading, and traditional tanks for the transportation of liquid petroleum products. The above design solution reduces the carrying capacity of petroleum products compared to a "clean" tanker due to an increase in the weight of the hull, as well as due to the limitation of the permissible capacity, since, especially for river vessels and vessels of mixed (river-sea) navigation, there is no possibility of increasing the dimensions of the vessel. The article presents a mathematical model and the results of test calculations for the choice of an architectural and structural type of cargo combined vessel for inland and mixed (river-sea) transportation. It is shown that the so-called platform vessels have the greatest prospects both in terms of the profit they bring to the shipowner and in terms of minimum operating costs.
- 18 September 2022
- Published by Volga State University of Water Transport in Russian Journal of Water Transport
- No. 72,p. 15-29
Open AccessInfluence of optimization model parameters on the main characteristics of the architectural and structural type of the combined vessel
Transportation of liquid cargo on specialized vessels has the disadvantage of not being able to reload. This is primarily due to the impossibility of placing dry cargo on the return trip in cargo tanks, both from the point of view of the need to clean up the latter, and from the point of view of access to cargo tanks with bulky or bulk cargo. This problem can be solved with the use of specialized cargo combined vessels, which have separate cargo spaces for dry cargo back loading, and traditional tanks for the transportation of liquid petroleum products. The above design solution reduces the carrying capacity of petroleum products compared to a "clean" tanker due to an increase in the weight of the hull, as well as due to the limitation of the permissible capacity, since, especially for river vessels and vessels of mixed (river-sea) navigation, there is no possibility of increasing the dimensions of the vessel. The article presents a mathematical model and the results of test calculations for the choice of an architectural and structural type of cargo combined vessel for inland and mixed (river-sea) transportation. It is shown that the so-called platform vessels have the greatest prospects both in terms of the profit they bring to the shipowner and in terms of minimum operating costs.
- Open Access
- 7 June 2022
- Published by Volga State University of Water Transport in Russian Journal of Water Transport
- No. 71,p. 29-45
Optimization of a combined tanker/platform type vessel based on simulation modeling
Combined vessels of various architectural and structural types can be used to increase the efficiency of oil-loading transportation by water transport. On inland waterways, the most perspective vessels are the tanker/platform type, carrying the main (bulk) cargo in the hull and the return (dry) on the platform equipped on an open deck. The article presents a general mathematical model and an algorithm for selecting elements and characteristics of the specified type of vessels, allowing them to be optimized in various operating conditions with specified initial data. The carried out extensive test calculations, systematized and presented in the form of graphical dependencies, show the effect of the stroke speed on the coefficient of the overall completeness of the hull at various backloading volumes, the efficiency in the form of the relative profit of a combined vessel compared to a "clean" tanker from the share of backloading and the ratio of freight rates for dry and liquid cargo. The low dependence of the relative profit on the length of the lines of operation is also shown.
- 7 June 2022
- Published by Volga State University of Water Transport in Russian Journal of Water Transport
- No. 71,p. 29-45
Open AccessOptimization of a combined tanker/platform type vessel based on simulation modeling
Combined vessels of various architectural and structural types can be used to increase the efficiency of oil-loading transportation by water transport. On inland waterways, the most perspective vessels are the tanker/platform type, carrying the main (bulk) cargo in the hull and the return (dry) on the platform equipped on an open deck. The article presents a general mathematical model and an algorithm for selecting elements and characteristics of the specified type of vessels, allowing them to be optimized in various operating conditions with specified initial data. The carried out extensive test calculations, systematized and presented in the form of graphical dependencies, show the effect of the stroke speed on the coefficient of the overall completeness of the hull at various backloading volumes, the efficiency in the form of the relative profit of a combined vessel compared to a "clean" tanker from the share of backloading and the ratio of freight rates for dry and liquid cargo. The low dependence of the relative profit on the length of the lines of operation is also shown.
- Open Access
- 15 September 2021
- Published by Volga State University of Water Transport in Russian Journal of Water Transport
- No. 68,p. 59-67
Сargo carrying capacity calculation for combined ships in optimization problem for ship’s main elements
Статья посвящена разработке методики оценки грузовместимости комбинированного судна типа танкер/судно-площадка. Особенность расчета грузовместимости таких судов связана с тем, что они имеют два конструктивно разных грузовых помещения, которые в тоже время взаимосвязаны, в том числе размерами, и влияющие друг на друга. Это обстоятельство приводит к необходимости корректировки известных методик оценки грузовместимости при обосновании главных размерений отдельно как танкеров, так и судов-площадок. Предлагается в уравнениях грузовместимости этих судов включать параметры, учитывающие это взаимное влияние и влияющие на грузовместимость. Даны способы их определения на начальных стадиях проектирования. Все это позволило получить зависимости, включение которых в математическую модель задачи оптимизации главных элементов комбинированного судна типа танкер/судно-площадка позволяет корректно оценивать все возможные варианты главных размерений с точки зрения их соответствия грузовместимости по каждому из перевозимых грузов и исключать из рассмотрения не удовлетворяющие этому требованию.
- 15 September 2021
- Published by Volga State University of Water Transport in Russian Journal of Water Transport
- No. 68,p. 59-67
Open AccessСargo carrying capacity calculation for combined ships in optimization problem for ship’s main elements
Статья посвящена разработке методики оценки грузовместимости комбинированного судна типа танкер/судно-площадка. Особенность расчета грузовместимости таких судов связана с тем, что они имеют два конструктивно разных грузовых помещения, которые в тоже время взаимосвязаны, в том числе размерами, и влияющие друг на друга. Это обстоятельство приводит к необходимости корректировки известных методик оценки грузовместимости при обосновании главных размерений отдельно как танкеров, так и судов-площадок. Предлагается в уравнениях грузовместимости этих судов включать параметры, учитывающие это взаимное влияние и влияющие на грузовместимость. Даны способы их определения на начальных стадиях проектирования. Все это позволило получить зависимости, включение которых в математическую модель задачи оптимизации главных элементов комбинированного судна типа танкер/судно-площадка позволяет корректно оценивать все возможные варианты главных размерений с точки зрения их соответствия грузовместимости по каждому из перевозимых грузов и исключать из рассмотрения не удовлетворяющие этому требованию.
- Open Access
- 23 March 2021
- Published by Volga State University of Water Transport in Russian Journal of Water Transport
- No. 66,p. 29-35
Сombined ships stability analysis at the stage of design study
. A method of stability analysis for combined ship (oil carrier/platform ship type) at the stage of design study is presented. It should be noted that not all of ship’s main seaworthiness and operational characteristics are the result of a simple addition of the characteristics of an oil carrier and a platform ship. Their mutual influence takes place, which should be taken into account when analysing the stability in the multivariant optimization problems of internal and external design of such ships. This leads to the requirement to adjust the known methods of stability analysis at the initial stages of ship design, which was the purpose of the present work and its originality. Taking into account the multivariance of the task and the hull design type, the stability assessment will be carried out through the analysis of the metacentric height extreme value on the assumption that the requirements of Russian River Register for admissible heeling angle at static wind effect are met. In order to account for nonlinearity of static stability curve when inclining up to the angles of deck immersion into water and emergence of bilge, it is suggested to apply an approximate method of metacentric radius determination. The proposed method of combined ship stability assessment is recommended to apply at the stage of justification and analysis of ship’s key elements as a limitation in the problems of mathematical modeling of optimization of such type of ships. The method allows to exclude from further consideration at the design study stage the possible options that do not meet the requirements of seaworthiness.
- 23 March 2021
- Published by Volga State University of Water Transport in Russian Journal of Water Transport
- No. 66,p. 29-35
Open AccessСombined ships stability analysis at the stage of design study
. A method of stability analysis for combined ship (oil carrier/platform ship type) at the stage of design study is presented. It should be noted that not all of ship’s main seaworthiness and operational characteristics are the result of a simple addition of the characteristics of an oil carrier and a platform ship. Their mutual influence takes place, which should be taken into account when analysing the stability in the multivariant optimization problems of internal and external design of such ships. This leads to the requirement to adjust the known methods of stability analysis at the initial stages of ship design, which was the purpose of the present work and its originality. Taking into account the multivariance of the task and the hull design type, the stability assessment will be carried out through the analysis of the metacentric height extreme value on the assumption that the requirements of Russian River Register for admissible heeling angle at static wind effect are met. In order to account for nonlinearity of static stability curve when inclining up to the angles of deck immersion into water and emergence of bilge, it is suggested to apply an approximate method of metacentric radius determination. The proposed method of combined ship stability assessment is recommended to apply at the stage of justification and analysis of ship’s key elements as a limitation in the problems of mathematical modeling of optimization of such type of ships. The method allows to exclude from further consideration at the design study stage the possible options that do not meet the requirements of seaworthiness.
- Open Access
- 1 June 2020
- Published by Volga State University of Water Transport in Russian Journal of Water Transport
- No. 63,p. 48-54
MATHEMATICAL MODEL FOR CALCULATING THE MASS OF THE METAL HULL OF A COMBINED VESSEL
The total displacement and maximum deadweight for ships calculation is impossible without the mass of the metal hull accurate determination . Its value is influenced by the class, type of vessel, architectural and design features, and operating conditions that are expressed in providing General and local strength. All this must be taken into account at the initial design stages, since even minor errors in the specified mass calculation have a strong impact on the empty displacement final result . In this paper, the mathematical model of predicting the component loads for the ship combined mass, including the surface ship theoretical generation, the case elements spatial layout, the hull structure the compartments and ties actual size calculation of and on the basis of the mass itemized calculation. The main empirical formulas that make up the mathematical model content and the test calculations results are presented.
- 1 June 2020
- Published by Volga State University of Water Transport in Russian Journal of Water Transport
- No. 63,p. 48-54
Open AccessMATHEMATICAL MODEL FOR CALCULATING THE MASS OF THE METAL HULL OF A COMBINED VESSEL
The total displacement and maximum deadweight for ships calculation is impossible without the mass of the metal hull accurate determination . Its value is influenced by the class, type of vessel, architectural and design features, and operating conditions that are expressed in providing General and local strength. All this must be taken into account at the initial design stages, since even minor errors in the specified mass calculation have a strong impact on the empty displacement final result . In this paper, the mathematical model of predicting the component loads for the ship combined mass, including the surface ship theoretical generation, the case elements spatial layout, the hull structure the compartments and ties actual size calculation of and on the basis of the mass itemized calculation. The main empirical formulas that make up the mathematical model content and the test calculations results are presented.
- Open Access
- 6 March 2020
- Published by Volga State University of Water Transport in Russian Journal of Water Transport
- No. 62,p. 40-50
CLASSIFICATION AND DESIGN FEATURES OF COMBINED SHIPS
This article presents a modern classification of sea-going combined ships of unrestricted navigation according to their type and purpose; as well as provides the review and analysis of national designs of combined restricted, inland and river-sea navigation ships in service and their characteristics. A review of the studies in the field of optimization and justification of key components and characteristics of combined ships is given. Apart from that, this article proposes a solution of the task aimed at optimization of combined ships’ components and characteristics by means of methods and software to be developed on the basis of mathematical modeling of a ship design for different types.
- 6 March 2020
- Published by Volga State University of Water Transport in Russian Journal of Water Transport
- No. 62,p. 40-50
Open AccessCLASSIFICATION AND DESIGN FEATURES OF COMBINED SHIPS
This article presents a modern classification of sea-going combined ships of unrestricted navigation according to their type and purpose; as well as provides the review and analysis of national designs of combined restricted, inland and river-sea navigation ships in service and their characteristics. A review of the studies in the field of optimization and justification of key components and characteristics of combined ships is given. Apart from that, this article proposes a solution of the task aimed at optimization of combined ships’ components and characteristics by means of methods and software to be developed on the basis of mathematical modeling of a ship design for different types.