Xinglei Zhao
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Xinglei Zhao has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
Anthony Y Ku
National Institute of Clean-and-Low-Carbon Energy, Changping District, Beijing, China
1 shared publicationBaodeng Wang
National Institute of Clean-and-Low-Carbon Energy, Changping District, Beijing, China
1 shared publicationGuoping Zhang
Shenhua Sichuan Energy Co., Ltd. Jiangyou Power Plant, Sichuan, China
1 shared publication- Jian Chen
State Key Laboratory of Chemical Engineering and Low-Carbon Technology, Department of Chemical Engineering, Tsinghua University, Beijing 100084, China
1 shared publication - Mengxiang Fang
Zhejiang University
1 shared publication Qian Cui
National Institute of Clean-and-Low-Carbon Energy, Changping District, Beijing, China
1 shared publication
Latest Publications
- Open Access
Pilot-Scale Experimental Study of a New High-Loading Absorbent for Capturing CO2 from Flue Gas
Chemical absorbents with low-energy requirements have become the primary focus of the research on CO2 capture from flue gas in power plants. To verify the absorption performance of the NICE absorbent developed by the National Institute of Clean-and-Low-Carbon Energy in China, a performance optimization test was conducted in Zhejiang University’s pilot-scale platform, and the effects of the liquid–gas ratio, regeneration pressure, rich liquid fractional flow, and interstage cooling on the absorption performance and regeneration energy consumption were investigated. The results showed that in the CO2 pilot test, the optimized minimum regeneration energy consumption was 2.85 GJ/t CO2, and the corresponding process parameters were as follows: a liquid–gas ratio of 1.82 L/m3, regeneration pressure of 191 kPa, an interstage cooling temperature of 40 °C, and a rich liquid fractional flow ratio of 0.18. This study preliminarily verified the low-energy consumption performance of the NICE absorbent and showed its good potential for industrial applications. Additionally, the NICE absorbent showed promise for capital and operating cost savings because of its low liquid–gas ratio.
Open AccessPilot-Scale Experimental Study of a New High-Loading Absorbent for Capturing CO2 from Flue Gas
Chemical absorbents with low-energy requirements have become the primary focus of the research on CO2 capture from flue gas in power plants. To verify the absorption performance of the NICE absorbent developed by the National Institute of Clean-and-Low-Carbon Energy in China, a performance optimization test was conducted in Zhejiang University’s pilot-scale platform, and the effects of the liquid–gas ratio, regeneration pressure, rich liquid fractional flow, and interstage cooling on the absorption performance and regeneration energy consumption were investigated. The results showed that in the CO2 pilot test, the optimized minimum regeneration energy consumption was 2.85 GJ/t CO2, and the corresponding process parameters were as follows: a liquid–gas ratio of 1.82 L/m3, regeneration pressure of 191 kPa, an interstage cooling temperature of 40 °C, and a rich liquid fractional flow ratio of 0.18. This study preliminarily verified the low-energy consumption performance of the NICE absorbent and showed its good potential for industrial applications. Additionally, the NICE absorbent showed promise for capital and operating cost savings because of its low liquid–gas ratio.
- Open Access
- 19 March 2020
- Published by Oxford University Press (OUP) in Clean Energy
- Vol. 4 (2) , 107-119
Post-combustion slipstream CO2-capture test facility at Jiangyou Power Plant, Sichuan, China: facility design and validation using 30% wt monoethanolamine (MEA) testing
Given the dominant share of coal in China’s energy-generation mix and the fact that >50% of the power plants in the country are currently 2 footprint will require the deployment of CO2 capture across at least part of its fleet of coal-fired power plants. CO2-capture technology is reaching commercial maturity, but it is still necessary to adapt the technology to regional conditions, such as power-plant design and flexible operation in the China context. Slipstream facilities provide valuable field data to support the commercialization of CO2 capture. We have built a slipstream facility at Jiangyou power plant in Sichuan that will allow us to explore China-relevant issues, especially flexible operation, over the next few years. We plan to share our results with the broader CO2-capture and CO2-storage (CCS) community to accelerate the deployment of CCS in China. This paper describes the design of the slipstream facility and presents results from our steady-state qualification tests using a well-studied benchmark solvent: 30% wt monoethanolamine (MEA). The results from our MEA tests compare favorably to results reported from other slipstream-test facilities around the world, allowing us to commission our system and establish a reference baseline for future studies.
- 19 March 2020
- Published by Oxford University Press (OUP) in Clean Energy
- Vol. 4 (2) , 107-119
Open AccessPost-combustion slipstream CO2-capture test facility at Jiangyou Power Plant, Sichuan, China: facility design and validation using 30% wt monoethanolamine (MEA) testing
Given the dominant share of coal in China’s energy-generation mix and the fact that >50% of the power plants in the country are currently 2 footprint will require the deployment of CO2 capture across at least part of its fleet of coal-fired power plants. CO2-capture technology is reaching commercial maturity, but it is still necessary to adapt the technology to regional conditions, such as power-plant design and flexible operation in the China context. Slipstream facilities provide valuable field data to support the commercialization of CO2 capture. We have built a slipstream facility at Jiangyou power plant in Sichuan that will allow us to explore China-relevant issues, especially flexible operation, over the next few years. We plan to share our results with the broader CO2-capture and CO2-storage (CCS) community to accelerate the deployment of CCS in China. This paper describes the design of the slipstream facility and presents results from our steady-state qualification tests using a well-studied benchmark solvent: 30% wt monoethanolamine (MEA). The results from our MEA tests compare favorably to results reported from other slipstream-test facilities around the world, allowing us to commission our system and establish a reference baseline for future studies.