Federico Semeraro
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Federico Semeraro has a total of 29 co-authors. Here are the top co-authors by number of shared publications:
Joseph C. Ferguson
4 shared publications- Francesco Panerai
Department of Aerospace Engineering, Grainger College of Engineering, University of Illinois Urbana-Champaign, Urbana, USA
3 shared publications Sergio Fraile Izquierdo
3 shared publications- André Maués Brabo Pereira
Institute of Computing, Fluminense Federal University, Niterói, Brazil
2 shared publications Nagi N. Mansour
2 shared publications- Pedro Cortez Fetter Lopes
Institute of Computing, Universidade Federal Fluminense, Niterói, Brazil
2 shared publications
Latest Publications
- Open Access
- 14 July 2025
- Published by Wiley in Advanced Materials
- Vol. 37 (42) , e2502007
Carbon Fiber Oxidation in 4D
The oxidation of carbon fibers at high temperatures is the primary degradation process in the thermal protection system of many hypersonic flight vehicles. Predicting the rate and the extent of oxidation is critical to ensure a safe and effective design. An oversized thermal protection system adds unnecessary mass, while an under‐designed one risks system failure and mission loss. Resolving high‐temperature material degradation due to oxidation has been a long‐standing challenge in designing for re‐entry flight environments. Using time‐resolved in situ X‐ray microtomography, the oxidation of carbon fibers at high temperatures is directly imaged, resolving the two limiting degradation regimes: diffusion‐ and reaction‐limited. The ability to resolve material degradation in time at the sub‐micron scale sheds light on the ablation phenomenon and enables predictions of material constitutive properties evolving in time, with profound implications on the ability to model the aerothermal response of heat shield materials in hostile environments.
- 14 July 2025
- Published by Wiley in Advanced Materials
- Vol. 37 (42) , e2502007
Open AccessCarbon Fiber Oxidation in 4D
The oxidation of carbon fibers at high temperatures is the primary degradation process in the thermal protection system of many hypersonic flight vehicles. Predicting the rate and the extent of oxidation is critical to ensure a safe and effective design. An oversized thermal protection system adds unnecessary mass, while an under‐designed one risks system failure and mission loss. Resolving high‐temperature material degradation due to oxidation has been a long‐standing challenge in designing for re‐entry flight environments. Using time‐resolved in situ X‐ray microtomography, the oxidation of carbon fibers at high temperatures is directly imaged, resolving the two limiting degradation regimes: diffusion‐ and reaction‐limited. The ability to resolve material degradation in time at the sub‐micron scale sheds light on the ablation phenomenon and enables predictions of material constitutive properties evolving in time, with profound implications on the ability to model the aerothermal response of heat shield materials in hostile environments.
- 29 November 2024
- Published by Elsevier in Computer Methods in Applied Mechanics and Engineering
- Vol. 434
Enabling FEM-based absolute permeability estimation in giga-voxel porous media with a single GPU
- 29 November 2024
- Published by Elsevier in Computer Methods in Applied Mechanics and Engineering
- Vol. 434
Enabling FEM-based absolute permeability estimation in giga-voxel porous media with a single GPU
- Open Access
arcjetCV: an open-source software to analyze material ablation
arcjetCV is an open-source Python software designed to automate time-resolved measurements of heatshield material recession and recession rates from arcjet test video footage. This new automated and accessible capability greatly exceeds previous manual extraction methods, enabling rapid and detailed characterization of material recession for any sample with a profile video. arcjetCV automates the video segmentation process using machine learning models, including a one-dimensional (1D) Convolutional Neural Network (CNN) to infer the time-window of interest, a two-dimensional (2D) CNN for image and edge segmentation, and a Local Outlier Factor (LOF) for outlier filtering. A graphical user interface (GUI) simplifies the user experience and an application programming interface (API) allows users to call the core functions from scripts, enabling video batch processing. arcjetCV's capability to measure time-resolved recession in turn enables characterization of non-linear processes (shrinkage, swelling, melt flows, etc.), contributing to higher fidelity validation and improved modeling of heatshield material performance. The source code associated with this article can be found at https://github.com/magnus-haw/arcjetCV.
Open AccessarcjetCV: an open-source software to analyze material ablation
arcjetCV is an open-source Python software designed to automate time-resolved measurements of heatshield material recession and recession rates from arcjet test video footage. This new automated and accessible capability greatly exceeds previous manual extraction methods, enabling rapid and detailed characterization of material recession for any sample with a profile video. arcjetCV automates the video segmentation process using machine learning models, including a one-dimensional (1D) Convolutional Neural Network (CNN) to infer the time-window of interest, a two-dimensional (2D) CNN for image and edge segmentation, and a Local Outlier Factor (LOF) for outlier filtering. A graphical user interface (GUI) simplifies the user experience and an application programming interface (API) allows users to call the core functions from scripts, enabling video batch processing. arcjetCV's capability to measure time-resolved recession in turn enables characterization of non-linear processes (shrinkage, swelling, melt flows, etc.), contributing to higher fidelity validation and improved modeling of heatshield material performance. The source code associated with this article can be found at https://github.com/magnus-haw/arcjetCV.
- Open Access
TomoSAM: a 3D Slicer extension using SAM for tomography segmentation
TomoSAM has been developed to integrate the cutting-edge Segment Anything Model (SAM) into 3D Slicer, a highly capable software platform used for 3D image processing and visualization. SAM is a promptable deep learning model that is able to identify objects and create image masks in a zero-shot manner, based only on a few user clicks. The synergy between these tools aids in the segmentation of complex 3D datasets from tomography or other imaging techniques, which would otherwise require a laborious manual segmentation process. The source code associated with this article can be found at https://github.com/fsemerar/SlicerTomoSAM
Open AccessTomoSAM: a 3D Slicer extension using SAM for tomography segmentation
TomoSAM has been developed to integrate the cutting-edge Segment Anything Model (SAM) into 3D Slicer, a highly capable software platform used for 3D image processing and visualization. SAM is a promptable deep learning model that is able to identify objects and create image masks in a zero-shot manner, based only on a few user clicks. The synergy between these tools aids in the segmentation of complex 3D datasets from tomography or other imaging techniques, which would otherwise require a laborious manual segmentation process. The source code associated with this article can be found at https://github.com/fsemerar/SlicerTomoSAM
- 18 January 2023
- Published by Elsevier in Computational Materials Science
- Vol. 219, 112021
Simulation toolkit for digital material characterization of large image-based microstructures
- 18 January 2023
- Published by Elsevier in Computational Materials Science
- Vol. 219, 112021
Simulation toolkit for digital material characterization of large image-based microstructures
- 3 January 2022
- Published by American Institute of Aeronautics and Astronautics (AIAA)
Multi-Scale Analysis of Effective Mechanical Properties of Porous 3D Woven Composite Materials
View Video Presentation: https://doi.org/10.2514/6.2022-2281.vid This work aims to compute and analyze the mechanical properties of 3D woven composite materials that share the same yarn structure but differ in their matrix porosity and yarn's fiber volume fraction. Assuming linear elastic behavior, NASA's PuMA software was used to characterize the different composites from their constituents' data, averaging their elastic properties in three main directions to obtain their effective orthotropic mechanical properties. This was performed in three steps: firstly, the porous matrix phase was analyzed at the micro-scale; then, these results were used, along with the mechanical properties of the fibers, to model the yarns at the meso-scale; finally, results from the constituents were homogenized and used to model the mechanical behavior of the unit cell at the macro-scale. The 3D woven composite materials selected for this study are made of a mixture of phenolic resin with porosity values between 0 and 0.6, and infiltrated carbon fiber yarns with fiber volume fractions between 0.5 and 0.8. Results from this study show the effect of different matrix porosities and fiber volume fractions on the macro-scale mechanical properties, and were validated through theoretical and semi-empirical expressions found in the literature.
- 3 January 2022
- Published by American Institute of Aeronautics and Astronautics (AIAA)
Multi-Scale Analysis of Effective Mechanical Properties of Porous 3D Woven Composite Materials
View Video Presentation: https://doi.org/10.2514/6.2022-2281.vid This work aims to compute and analyze the mechanical properties of 3D woven composite materials that share the same yarn structure but differ in their matrix porosity and yarn's fiber volume fraction. Assuming linear elastic behavior, NASA's PuMA software was used to characterize the different composites from their constituents' data, averaging their elastic properties in three main directions to obtain their effective orthotropic mechanical properties. This was performed in three steps: firstly, the porous matrix phase was analyzed at the micro-scale; then, these results were used, along with the mechanical properties of the fibers, to model the yarns at the meso-scale; finally, results from the constituents were homogenized and used to model the mechanical behavior of the unit cell at the macro-scale. The 3D woven composite materials selected for this study are made of a mixture of phenolic resin with porosity values between 0 and 0.6, and infiltrated carbon fiber yarns with fiber volume fractions between 0.5 and 0.8. Results from this study show the effect of different matrix porosities and fiber volume fractions on the macro-scale mechanical properties, and were validated through theoretical and semi-empirical expressions found in the literature.
- 1 January 2021
- Published by Elsevier in Computational Materials Science
- Vol. 186
Anisotropic analysis of fibrous and woven materials part 2: Computation of effective conductivity
- 1 January 2021
- Published by Elsevier in Computational Materials Science
- Vol. 186
Anisotropic analysis of fibrous and woven materials part 2: Computation of effective conductivity
- 1 June 2020
- Published by Elsevier in Computational Materials Science
- Vol. 178
Anisotropic analysis of fibrous and woven materials part 1: Estimation of local orientation
- 1 June 2020
- Published by Elsevier in Computational Materials Science
- Vol. 178
Anisotropic analysis of fibrous and woven materials part 1: Estimation of local orientation