Costantino Zuccari
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Costantino Zuccari has a total of 38 co-authors. Here are the top co-authors by number of shared publications:
- Giulio Viola
Department of Biological, Geological and Environmental Sciences University of Bologna Bologna Italy
13 shared publications - Gianluca Vignaroli
Department of Biological, Geological and Environmental Sciences, University of Bologna, Via Zamboni 67, 40126, Bologna, Italy
11 shared publications Luca Aldega
5 shared publications- Sara Degl'INnocenti
Department of Biological, Geological and Environmental Sciences–BiGeA University of Bologna Bologna Italy
4 shared publications - Andrew Kylander-Clark
Department of Earth Science University of California Santa Barbara CA USA
3 shared publications Francesco Giuntoli
3 shared publications
Latest Publications
- 9 November 2026
- Published by American Geophysical Union (AGU) in Tectonics
- Vol. 45 (11)
Twofold Cretaceous Tectonic History Redefines the Oman Subduction‐Obduction Orogen: New Structural, Metamorphic, and Geochronological Constraints
The structural and metamorphic evolution of the Jabal Akhdar (JA) tectonic window in the Oman Mountains is critical to understanding incipient subduction and obduction along the northeastern Arabian margin. Here, we reassess the tectono‐metamorphic architecture of the window to address long‐standing debates about the timing, kinematics, and metamorphic conditions of its deformation. We reconstruct its tectonic evolution by integrating field mapping, Raman spectroscopy of carbonaceous material, chlorite‐phengite multi‐equilibrium thermobarometry, and U‐Pb carbonate geochronology. Our results identify two major deformation phases: (a) the first, a pre‐obduction event with top‐to‐the‐northern quadrants contractional structures, occurred at 110–90 Ma under high‐pressure greenschist to epidote‐blueschist facies metamorphic conditions, with a baric peak of 0.7 GPa at 330°C and a thermal peak of 420°C; (b) the second, a syn‐obduction deformation phase associated with top‐to‐the‐SW shearing, occurred at ∼330°C between 85 and 70 Ma, coeval with the southwestward obduction of the Semail Ophiolite. We interpret these findings to record an earlier phase of failed, mid‐Cretaceous SW‐dipping intracontinental subduction in JA that preceded the well‐established NE‐dipping intra‐oceanic subduction and subsequent ophiolite obduction. The pre‐obduction, approximately NE‐verging accretionary wedge records thin‐skinned underthrusting of metasedimentary units and burial to depths >20 km before the emplacement of the ophiolite atop the wedge. Recognition of this early high‐pressure contractional phase refines the role of JA in the incipient stages of Late Cretaceous subduction along the Arabian margin and adds new constraints on the tectonic evolution of the Oman subduction‐obduction system.
- 9 November 2026
- Published by American Geophysical Union (AGU) in Tectonics
- Vol. 45 (11)
Twofold Cretaceous Tectonic History Redefines the Oman Subduction‐Obduction Orogen: New Structural, Metamorphic, and Geochronological Constraints
The structural and metamorphic evolution of the Jabal Akhdar (JA) tectonic window in the Oman Mountains is critical to understanding incipient subduction and obduction along the northeastern Arabian margin. Here, we reassess the tectono‐metamorphic architecture of the window to address long‐standing debates about the timing, kinematics, and metamorphic conditions of its deformation. We reconstruct its tectonic evolution by integrating field mapping, Raman spectroscopy of carbonaceous material, chlorite‐phengite multi‐equilibrium thermobarometry, and U‐Pb carbonate geochronology. Our results identify two major deformation phases: (a) the first, a pre‐obduction event with top‐to‐the‐northern quadrants contractional structures, occurred at 110–90 Ma under high‐pressure greenschist to epidote‐blueschist facies metamorphic conditions, with a baric peak of 0.7 GPa at 330°C and a thermal peak of 420°C; (b) the second, a syn‐obduction deformation phase associated with top‐to‐the‐SW shearing, occurred at ∼330°C between 85 and 70 Ma, coeval with the southwestward obduction of the Semail Ophiolite. We interpret these findings to record an earlier phase of failed, mid‐Cretaceous SW‐dipping intracontinental subduction in JA that preceded the well‐established NE‐dipping intra‐oceanic subduction and subsequent ophiolite obduction. The pre‐obduction, approximately NE‐verging accretionary wedge records thin‐skinned underthrusting of metasedimentary units and burial to depths >20 km before the emplacement of the ophiolite atop the wedge. Recognition of this early high‐pressure contractional phase refines the role of JA in the incipient stages of Late Cretaceous subduction along the Arabian margin and adds new constraints on the tectonic evolution of the Oman subduction‐obduction system.
- Open Access
- 14 March 2026
- Published by Copernicus GmbH
Stylolite-controlled dolomitization and dedolomitization in low-porosity carbonates (Lessini Mountains, Southern Alps, Italy)
Dolomitization is among the most widespread processes affecting carbonate rocks and may significantly overprint carbonate successions during post-diagenetic and deformation-related fluid infilling and circulation. The process is generally hindered in low-porosity/low-permeability carbonates (e.g., micritic limestones). However, primary (e.g., bedding interfaces) and secondary (e.g., fractures) rock planar anisotropies might compensate for this low porosity/permeability, acting as potential pathways for fluid ingress and as loci for the initiation of fluid-rock interaction. Among these anisotropies, burial stylolites are particularly widespread in carbonate successions, forming through progressive chemo-mechanical dissolution-precipitation over time. Their large lateral continuity (>1 km) and potentially high vertical frequency make stylolites key features in governing the syn-to-post diagenetic evolution of sedimentary successions.Although stylolites have traditionally been considered fluid barriers, recent studies challenge this paradigm, a view that we further stress here. We present petrophysical data from micritic limestones of the Lessini Mountains (Italian Southern Alps), where a large portion of the exposed carbonate Jurassic-Cretaceous succession (>700 m thick) is almost entirely overprinted by a regional dolomitization event, which produced large volumes of massive, sandy, crystalline dolostones. We studied preserved patches of micritic limestone where the progression of dolomitization from initiation to complete overprint is clearly visible. Hg-porosimetry, SEM imaging, μ-CT and cathodoluminescence were combined to constrain petrophysical variations associated with dolomitization. Results show that burial stylolites (Hg injection capillary threshold pressure – HgP c. 4 Psi) affecting the micritic limestones (HgP c. 5140 Psi) were systematically exploited by the dolomitizing Mg-rich fluids, transiently aided by fluid overpressure surges, which locally induced brecciation and further enhanced fluid-rock interaction.Progressive dolomitization increased rock porosity and density from ~1% to ~20% and from 2.65 g/cm3 to 2.9 g/cm3, respectively (from micritic limestone to massive dolostone). Pore characteristics (pore-size, sphericity, 3D-φ-angle and 3D-Eulerian characteristic - all constrained by μ-CT data and Hg-μporosimetry) indicate a complex evolution characterised by (i) early diffuse dolomitization followed by (ii) localised dedolomitization triggered by the later ingress along the porous stylolites of a Mg-poor fluid, which selectively infiltrated the dolomitized succession and created significant rock porosity. Dedolomitization appears to have been more efficient (and is better preserved) along the dolomitized stylolites than within the massive dolostones, where fluid-rock interaction was inhibited by the larger rock volume.Spatio-temporal porosity variations related to dolomitization and dedolomitization, guided by- and preserved within stylolites, have significant implications for (i) reservoir quality evaluation, and (ii) the mechanical behaviour of carbonate rock masses during post-fluid-infiltration deformation phases. In these settings, dolomitization and dedolomitization promote long-term fluid ingress and circulation, thus even modulating further deformation localisation.
- 14 March 2026
- Published by Copernicus GmbH
Open AccessStylolite-controlled dolomitization and dedolomitization in low-porosity carbonates (Lessini Mountains, Southern Alps, Italy)
Dolomitization is among the most widespread processes affecting carbonate rocks and may significantly overprint carbonate successions during post-diagenetic and deformation-related fluid infilling and circulation. The process is generally hindered in low-porosity/low-permeability carbonates (e.g., micritic limestones). However, primary (e.g., bedding interfaces) and secondary (e.g., fractures) rock planar anisotropies might compensate for this low porosity/permeability, acting as potential pathways for fluid ingress and as loci for the initiation of fluid-rock interaction. Among these anisotropies, burial stylolites are particularly widespread in carbonate successions, forming through progressive chemo-mechanical dissolution-precipitation over time. Their large lateral continuity (>1 km) and potentially high vertical frequency make stylolites key features in governing the syn-to-post diagenetic evolution of sedimentary successions.Although stylolites have traditionally been considered fluid barriers, recent studies challenge this paradigm, a view that we further stress here. We present petrophysical data from micritic limestones of the Lessini Mountains (Italian Southern Alps), where a large portion of the exposed carbonate Jurassic-Cretaceous succession (>700 m thick) is almost entirely overprinted by a regional dolomitization event, which produced large volumes of massive, sandy, crystalline dolostones. We studied preserved patches of micritic limestone where the progression of dolomitization from initiation to complete overprint is clearly visible. Hg-porosimetry, SEM imaging, μ-CT and cathodoluminescence were combined to constrain petrophysical variations associated with dolomitization. Results show that burial stylolites (Hg injection capillary threshold pressure – HgP c. 4 Psi) affecting the micritic limestones (HgP c. 5140 Psi) were systematically exploited by the dolomitizing Mg-rich fluids, transiently aided by fluid overpressure surges, which locally induced brecciation and further enhanced fluid-rock interaction.Progressive dolomitization increased rock porosity and density from ~1% to ~20% and from 2.65 g/cm3 to 2.9 g/cm3, respectively (from micritic limestone to massive dolostone). Pore characteristics (pore-size, sphericity, 3D-φ-angle and 3D-Eulerian characteristic - all constrained by μ-CT data and Hg-μporosimetry) indicate a complex evolution characterised by (i) early diffuse dolomitization followed by (ii) localised dedolomitization triggered by the later ingress along the porous stylolites of a Mg-poor fluid, which selectively infiltrated the dolomitized succession and created significant rock porosity. Dedolomitization appears to have been more efficient (and is better preserved) along the dolomitized stylolites than within the massive dolostones, where fluid-rock interaction was inhibited by the larger rock volume.Spatio-temporal porosity variations related to dolomitization and dedolomitization, guided by- and preserved within stylolites, have significant implications for (i) reservoir quality evaluation, and (ii) the mechanical behaviour of carbonate rock masses during post-fluid-infiltration deformation phases. In these settings, dolomitization and dedolomitization promote long-term fluid ingress and circulation, thus even modulating further deformation localisation.
- Open Access
- 13 March 2026
- Published by Copernicus GmbH
When obduction meets accretion: new geochronological and metamorphic constraints on an Albian-Campanian transient subduction-obduction system in NE Oman
Late Cretaceous convergence between the Afro-Arabian and Eurasian plates triggered a short-lived yet complex subduction–obduction cycle along the Arabian margin, culminating in the Campanian obduction of Neo-Tethyan oceanic lithosphere onto the Arabian continent. Although the Oman Mountains preserve an exceptional record of this evolution, the timing and tectonic significance of deformation and metamorphism along the Arabian margin remain poorly constrained. This is particularly true for the Jabal Akhdar Window (JAW), a tectonic feature traditionally regarded as exposing the most external, non-metamorphic and little deformed portions of the margin.We present new geochronological constraints integrated with structural and metamorphic data that call for a revision of the tectonic history of the Cryogenian–Cretaceous JAW succession. Raman spectroscopy of carbonaceous material (RSCM) and chlorite–white mica–quartz–water multiequilibrium thermobarometry constrain synkinematic temperatures and pressures for two distinct regional contractional deformation phases (D1 and D2), while U–Pb dating of structurally constrained calc-mylonites provides much-needed absolute age control on deformation.D1 records pervasive brittle–ductile to ductile deformation affecting both the pre-Permian basement and the overlying Permian passive-margin carbonates, with an overall top-to-the-NE transport direction. U–Pb geochronology of top-to-the-NE calc-mylonites yields an age of 106 ± 13 Ma, consistent with field-based constraints and regional correlations. Synkinematic RSCM and thermobarometric data indicate upper greenschist- to lower blueschist-facies conditions (~370 °C, minimum ~0.7 GPa), consistent with an Albian HP–LT accretionary event related to early convergence along the Arabian margin. D1 is interpreted as due to progressive nappe stacking within a NE-verging accretionary prism formed above an immature and short-lived intracontinental SW-directed subduction zone.D2 represents a younger, lower-grade, top-to-the-S/SW-verging deformation event localized within Upper Cretaceous carbonates, mainly in the northern JAW. RSCM analyses from top-to-the S/SW calc-mylonites constrain synkinematic temperatures to ~330 °C, while U–Pb carbonate ages from the same rocks cluster between ~80 and 75 Ma. These data link D2 deformation to southwestward obduction, coeval with the emplacement of the Semail Ophiolite and Hawasina nappes.We propose a two-stage evolution for the northeastern Oman Mountains, involving a transient, SW-directed Albian subduction associated with HP–LT accretion followed by Late Cretaceous obduction driven by a newly established NE-dipping intraoceanic subduction zone.These results demonstrate that HP–LT metamorphism in the JAW is regionally developed and temporally resolved, highlighting the critical role of geochronology of structurally well-constrained fabrics in deciphering transient subduction–obduction processes during the Late Cretaceous Wilson Cycle evolution of the Arabian margin.
- 13 March 2026
- Published by Copernicus GmbH
Open AccessWhen obduction meets accretion: new geochronological and metamorphic constraints on an Albian-Campanian transient subduction-obduction system in NE Oman
Late Cretaceous convergence between the Afro-Arabian and Eurasian plates triggered a short-lived yet complex subduction–obduction cycle along the Arabian margin, culminating in the Campanian obduction of Neo-Tethyan oceanic lithosphere onto the Arabian continent. Although the Oman Mountains preserve an exceptional record of this evolution, the timing and tectonic significance of deformation and metamorphism along the Arabian margin remain poorly constrained. This is particularly true for the Jabal Akhdar Window (JAW), a tectonic feature traditionally regarded as exposing the most external, non-metamorphic and little deformed portions of the margin.We present new geochronological constraints integrated with structural and metamorphic data that call for a revision of the tectonic history of the Cryogenian–Cretaceous JAW succession. Raman spectroscopy of carbonaceous material (RSCM) and chlorite–white mica–quartz–water multiequilibrium thermobarometry constrain synkinematic temperatures and pressures for two distinct regional contractional deformation phases (D1 and D2), while U–Pb dating of structurally constrained calc-mylonites provides much-needed absolute age control on deformation.D1 records pervasive brittle–ductile to ductile deformation affecting both the pre-Permian basement and the overlying Permian passive-margin carbonates, with an overall top-to-the-NE transport direction. U–Pb geochronology of top-to-the-NE calc-mylonites yields an age of 106 ± 13 Ma, consistent with field-based constraints and regional correlations. Synkinematic RSCM and thermobarometric data indicate upper greenschist- to lower blueschist-facies conditions (~370 °C, minimum ~0.7 GPa), consistent with an Albian HP–LT accretionary event related to early convergence along the Arabian margin. D1 is interpreted as due to progressive nappe stacking within a NE-verging accretionary prism formed above an immature and short-lived intracontinental SW-directed subduction zone.D2 represents a younger, lower-grade, top-to-the-S/SW-verging deformation event localized within Upper Cretaceous carbonates, mainly in the northern JAW. RSCM analyses from top-to-the S/SW calc-mylonites constrain synkinematic temperatures to ~330 °C, while U–Pb carbonate ages from the same rocks cluster between ~80 and 75 Ma. These data link D2 deformation to southwestward obduction, coeval with the emplacement of the Semail Ophiolite and Hawasina nappes.We propose a two-stage evolution for the northeastern Oman Mountains, involving a transient, SW-directed Albian subduction associated with HP–LT accretion followed by Late Cretaceous obduction driven by a newly established NE-dipping intraoceanic subduction zone.These results demonstrate that HP–LT metamorphism in the JAW is regionally developed and temporally resolved, highlighting the critical role of geochronology of structurally well-constrained fabrics in deciphering transient subduction–obduction processes during the Late Cretaceous Wilson Cycle evolution of the Arabian margin.
- Open Access
- 15 May 2025
- Published by Copernicus GmbH
Evidence of blueschist facies shortening in the Jabal Akhdar tectonic window, northern Oman
The Jabal Akhdar and Saih Hatat tectonic windows in the Oman Mountains are key geological features where to investigate the geological record of the Late Cretaceous subduction, obduction and exhumation cycle that affected the northeastern margin of the Arabian Plate. Indeed, the metasedimentary Autochthon A (pre-Permian) and B (post-Permian) Units exposed therein and separated by the so-called Hercynian Unconformity display well-preserved evidence of many of those processes, as they were spared by the obliterating effects of continental collision once subduction terminated. Research on the structural and metamorphic framework of the Jabal Akhdar tectonic window has been scanty until now. This stems from the fact that, unlike Saih Hatat, which records greenschist to eclogite facies metamorphism, Jabal Akhdar has been traditionally considered a portion of the Arabian Plate only recording anchizone metamorphism (only one site has recently been reported as preserving evidence of high pressure-low temperature (HP-LT) metamorphism dated to the Late Cretaceous). Here, we present new field and thermobarometric data from Jabal Akhdar aimed at better constraining its structural and metamorphic framework on a regional scale and possibly correlating it to the greater subduction-obduction cycle of Oman.In western Jabal Akhdar, field constraints from newly documented top-to-the ENE shearing indicate the local pervasive structural reactivation of the Hercynian Unconformity as a post-Permian ENE-verging thrust. Multiple Raman spectroscopy findings of metamorphic aragonite infilling Mode I veins support a HP-LT metamorphic imprint associated with such shortening. In the eastern sector of the tectonic window, on the other hand, folding and S-C tectonites in Ediacaran slates indicate NW-verging shear. Our new structural data thus suggest NE- to NW-verging shortening and stacking within and between the Autochthon A and B. Further new structural evidence from the structurally higher Autochthon B in northeastern Jabal Akhdar indicates that inherited structures with top-to-the NE kinematics were later overprinted by lower-grade, localised SW-ward thrusting through interlayer slip recorded in Cretaceous marbles. Finally, extensional reactivation followed, associated with Neogene doming and final exhumation.We employed a multidisciplinary approach to constrain the P-T conditions associated with the identified structures. Chlorite–white mica–quartz–water multiequilibrium analyses integrated with Raman spectroscopy on carbonaceous material indicate T = 370 °C and P = 0.50 GPa in western Jabal Akhdar, associated with NE-verging S-C tectonites, and T = 330 °C and P = 0.66 GPa, in the eastern domain of the tectonic window, related to NW-verging folds. These thermobarometric results place the investigated deformation in the greenschist and lower blueschist facies metamorphic fields, respectively.These new structural data and the recorded metamorphic signature call for a re-evaluation of the commonly held notion of a mostly undeformed and non-metamorphic geological record within Jabal Akhdar, questions its correlation (or lack thereof) with the Saih Hatat tectonic window and, ultimately, Jabal Akhdar’s role within the framework of the Oman Late Cretaceous subduction and obduction phases.
- 15 May 2025
- Published by Copernicus GmbH
Open AccessEvidence of blueschist facies shortening in the Jabal Akhdar tectonic window, northern Oman
The Jabal Akhdar and Saih Hatat tectonic windows in the Oman Mountains are key geological features where to investigate the geological record of the Late Cretaceous subduction, obduction and exhumation cycle that affected the northeastern margin of the Arabian Plate. Indeed, the metasedimentary Autochthon A (pre-Permian) and B (post-Permian) Units exposed therein and separated by the so-called Hercynian Unconformity display well-preserved evidence of many of those processes, as they were spared by the obliterating effects of continental collision once subduction terminated. Research on the structural and metamorphic framework of the Jabal Akhdar tectonic window has been scanty until now. This stems from the fact that, unlike Saih Hatat, which records greenschist to eclogite facies metamorphism, Jabal Akhdar has been traditionally considered a portion of the Arabian Plate only recording anchizone metamorphism (only one site has recently been reported as preserving evidence of high pressure-low temperature (HP-LT) metamorphism dated to the Late Cretaceous). Here, we present new field and thermobarometric data from Jabal Akhdar aimed at better constraining its structural and metamorphic framework on a regional scale and possibly correlating it to the greater subduction-obduction cycle of Oman.In western Jabal Akhdar, field constraints from newly documented top-to-the ENE shearing indicate the local pervasive structural reactivation of the Hercynian Unconformity as a post-Permian ENE-verging thrust. Multiple Raman spectroscopy findings of metamorphic aragonite infilling Mode I veins support a HP-LT metamorphic imprint associated with such shortening. In the eastern sector of the tectonic window, on the other hand, folding and S-C tectonites in Ediacaran slates indicate NW-verging shear. Our new structural data thus suggest NE- to NW-verging shortening and stacking within and between the Autochthon A and B. Further new structural evidence from the structurally higher Autochthon B in northeastern Jabal Akhdar indicates that inherited structures with top-to-the NE kinematics were later overprinted by lower-grade, localised SW-ward thrusting through interlayer slip recorded in Cretaceous marbles. Finally, extensional reactivation followed, associated with Neogene doming and final exhumation.We employed a multidisciplinary approach to constrain the P-T conditions associated with the identified structures. Chlorite–white mica–quartz–water multiequilibrium analyses integrated with Raman spectroscopy on carbonaceous material indicate T = 370 °C and P = 0.50 GPa in western Jabal Akhdar, associated with NE-verging S-C tectonites, and T = 330 °C and P = 0.66 GPa, in the eastern domain of the tectonic window, related to NW-verging folds. These thermobarometric results place the investigated deformation in the greenschist and lower blueschist facies metamorphic fields, respectively.These new structural data and the recorded metamorphic signature call for a re-evaluation of the commonly held notion of a mostly undeformed and non-metamorphic geological record within Jabal Akhdar, questions its correlation (or lack thereof) with the Saih Hatat tectonic window and, ultimately, Jabal Akhdar’s role within the framework of the Oman Late Cretaceous subduction and obduction phases.
- Open Access
- 18 March 2025
- Published by Copernicus GmbH
Orogenic wedge formation during obduction: insights and perspectives from the Oman Mountains
Obduction causes overthrusting of dense oceanic rocks on top of lighter continental units at convergent margins. Despite many conceptual models addressing both its initiation and the counterintuitive significant horizontal displacements of large and heavy rafts of oceanic lithosphere, obduction is only partially understood and remains quite an enigmatic process. Uncertainty remains on the triggering mechanisms and the emplacement modes under mechanically unfavourable frameworks, with recent contributions stressing the role of far-field boundary conditions, such as the impact of bursts of “plate acceleration”. The processes governing convergent margin deformation and the structuring of an orogenic wedge in association with obduction and ophiolite emplacement also remain mostly unexplored. In that setting, complex orogenic architectures may form during the imbrication of mobile and deformable continental crust slivers underneath advancing, and possibly several kilometre-thick, ophiolitic successions. The northeastern Oman Mountains allow studying one such orogenic wedge in the Jabal Akhdar Dome (JAD), an Arabian Plate related domain that is now exhumed to the surface from beneath the allochthonous and far-travelled Semail Ophiolite. At odds with the general view, recent and ongoing studies indicate that parts of the Arabian Plate therefrom experienced a complete cycle of subduction-exhumation broadly concurrent with the Semail Ophiolite obduction in the Late Cretaceous, thus recording high pressure-low temperature (HP-LT) blueschist facies conditions of ≥ 0.9 GPa (based on the presence of aragonite in carbonates) and ≃ 350 °C. Preservation of such a metamorphic signature in the relatively undeformed external portion of the Arabian Plate calls for a re-evaluation (i) of the regional picture framing HP-LT metamorphism formation in the absence of obvious links with long-lived subduction or major continental collision and (ii) of the mechanisms capable to exhume the HP-LT rocks and accrete them beneath the Semail ophiolitic sequence. Our on-going structural, stratigraphic and metamorphic investigations within the JAD document a twofold history sequentially encompassing: 1) Cenomanian top-to-the NE imbrication and accretion under HP-LT conditions in the subduction channel of a SW-dipping Arabian Plate-directed subduction zone nucleating on transitional passive margin crust; 2) Late-Cretaceous top-to-the SW lower-grade shearing during SW-ward thrusting and imbrication of the Hawasina nappes and the obduction of the Semail Ophiolite. This would have been triggered by an embryonic NE-ward intraoceanic subduction close to the Semail spreading centre, which set in motion the ophiolite basal thrust that, through >400 km of SW-ward transport, overrode the by-then failed subduction zone of (1); 3) Finally, the current NE-ward Makran subduction zone initiated farther outboard in the Paleogene.
- 18 March 2025
- Published by Copernicus GmbH
Open AccessOrogenic wedge formation during obduction: insights and perspectives from the Oman Mountains
Obduction causes overthrusting of dense oceanic rocks on top of lighter continental units at convergent margins. Despite many conceptual models addressing both its initiation and the counterintuitive significant horizontal displacements of large and heavy rafts of oceanic lithosphere, obduction is only partially understood and remains quite an enigmatic process. Uncertainty remains on the triggering mechanisms and the emplacement modes under mechanically unfavourable frameworks, with recent contributions stressing the role of far-field boundary conditions, such as the impact of bursts of “plate acceleration”. The processes governing convergent margin deformation and the structuring of an orogenic wedge in association with obduction and ophiolite emplacement also remain mostly unexplored. In that setting, complex orogenic architectures may form during the imbrication of mobile and deformable continental crust slivers underneath advancing, and possibly several kilometre-thick, ophiolitic successions. The northeastern Oman Mountains allow studying one such orogenic wedge in the Jabal Akhdar Dome (JAD), an Arabian Plate related domain that is now exhumed to the surface from beneath the allochthonous and far-travelled Semail Ophiolite. At odds with the general view, recent and ongoing studies indicate that parts of the Arabian Plate therefrom experienced a complete cycle of subduction-exhumation broadly concurrent with the Semail Ophiolite obduction in the Late Cretaceous, thus recording high pressure-low temperature (HP-LT) blueschist facies conditions of ≥ 0.9 GPa (based on the presence of aragonite in carbonates) and ≃ 350 °C. Preservation of such a metamorphic signature in the relatively undeformed external portion of the Arabian Plate calls for a re-evaluation (i) of the regional picture framing HP-LT metamorphism formation in the absence of obvious links with long-lived subduction or major continental collision and (ii) of the mechanisms capable to exhume the HP-LT rocks and accrete them beneath the Semail ophiolitic sequence. Our on-going structural, stratigraphic and metamorphic investigations within the JAD document a twofold history sequentially encompassing: 1) Cenomanian top-to-the NE imbrication and accretion under HP-LT conditions in the subduction channel of a SW-dipping Arabian Plate-directed subduction zone nucleating on transitional passive margin crust; 2) Late-Cretaceous top-to-the SW lower-grade shearing during SW-ward thrusting and imbrication of the Hawasina nappes and the obduction of the Semail Ophiolite. This would have been triggered by an embryonic NE-ward intraoceanic subduction close to the Semail spreading centre, which set in motion the ophiolite basal thrust that, through >400 km of SW-ward transport, overrode the by-then failed subduction zone of (1); 3) Finally, the current NE-ward Makran subduction zone initiated farther outboard in the Paleogene.
- Open Access
- 18 March 2025
- Published by Copernicus GmbH
Burial stylolites favouring Mg-rich fluid ingress and fluid-rock interaction: petrophysical variations during regional dolomitization in the Lessini Mountains (Southern Alps, Italy)
Rock petrophysical properties, including porosity and permeability, are fundamental factors in regulating fluid ingress, flow and fluid-rock interaction across various length scales and tectonic settings. The composition of fluids, and their modes of ingress into- and reaction with host rocks, in turn influence bulk rock properties. Therefore, fluids can significantly alter rock rheology, potentially modifying their density, long-term viscosity, porosity and permeability. Mineralizing fluids may also change the rock composition, heal fractures, and promote strain hardening within active fault systems, potentially impacting the seismic cycle.To better understand these processes and the governing background conditions, it is particularly useful to investigate the pathways for fluid flow, especially in rocks with low primary porosity and permeability, which would normally hinder significant fluid circulation. In micritic, horizontally-bedded carbonates, for example, vertical fluid flow is generally limited far away from tectonic fractures, whereas lateral, bed-parallel circulation is favoured exploiting laterally continuous planar anisotropies (e.g., bed-bed interfaces), to progressively permeate the succession. Secondary anisotropies, such as pressure-solution seams (e.g., stylolites), may represent other interesting features for fluid flow, being at times very abundant in limestone. However, they are typically considered to reduce the permeability and porosity of host rocks due to (i) the cementation and precipitation of dissolved materials in pores within the immediately surrounding rock and (ii) the accumulation of insoluble, fine-grained and low-permeability material on their surfaces. Recent studies in carbonates challenged this assumption, demonstrating that burial stylolites can be preferential pathways for karst dissolution.We present here new data on the petrophysical properties of Cretaceous micritic limestone from the Lessini Mountains, Veneto, Italian Southern Alps, where much of the exposed, generally sub-horizontal Mesozoic carbonate succession underwent pervasive dolomitization during Eocene extensional tectonics and the onset of the Venetian Volcanic Province magmatism. Petrographic analyses, Hg-porosimetry, and He-pycnometry were applied to assess the effects of Mg-rich fluids, probably connected with the volcanic environment, on micritic limestone. Preliminary results indicate that burial stylolites developed in low porosity limestone are selectively dolomitized, with dolomitization seams 1-10 mm thick, suggesting pervasive bedding-parallel fluid flow. Dolomitization occurred also along vertical fractures and in fracture meshes of mosaic breccias, suggesting across-bedding Mg-rich fluid circulation associated with normal faults accommodating.Dolomitization significantly increased rock density from ~2.65 g/cm³ in the pristine micritic limestone to ~2.9 g/cm³ in the fully dolomitized rock. Additionally, pore size, porosity, and the capillary threshold pressure of Hg injection change gradually but substantially from the limestone to the dolomite, with median pore sizes increasing from ~0.012 μm to ~0.33 μm, porosity from ~3.2% to 21.8%, and capillary threshold values decreasing from ~5140 to ~35 PSI.These results demonstrate that, under specific conditions, stylolites can actually serve as effective pathways for fluid ingress/migration and thus promote fluid-rock interaction in rocks characterized by overall low porosity and permeability (e.g., micritic limestone). Furthermore, we show that dolomitization significantly modified the petrophysical rock properties, further enhancing fluid ingress and likely promoting fracturing and brecciation by changing rheology, with consequences for deformation localization and partitioning during later tectonic activity.
- 18 March 2025
- Published by Copernicus GmbH
Open AccessBurial stylolites favouring Mg-rich fluid ingress and fluid-rock interaction: petrophysical variations during regional dolomitization in the Lessini Mountains (Southern Alps, Italy)
Rock petrophysical properties, including porosity and permeability, are fundamental factors in regulating fluid ingress, flow and fluid-rock interaction across various length scales and tectonic settings. The composition of fluids, and their modes of ingress into- and reaction with host rocks, in turn influence bulk rock properties. Therefore, fluids can significantly alter rock rheology, potentially modifying their density, long-term viscosity, porosity and permeability. Mineralizing fluids may also change the rock composition, heal fractures, and promote strain hardening within active fault systems, potentially impacting the seismic cycle.To better understand these processes and the governing background conditions, it is particularly useful to investigate the pathways for fluid flow, especially in rocks with low primary porosity and permeability, which would normally hinder significant fluid circulation. In micritic, horizontally-bedded carbonates, for example, vertical fluid flow is generally limited far away from tectonic fractures, whereas lateral, bed-parallel circulation is favoured exploiting laterally continuous planar anisotropies (e.g., bed-bed interfaces), to progressively permeate the succession. Secondary anisotropies, such as pressure-solution seams (e.g., stylolites), may represent other interesting features for fluid flow, being at times very abundant in limestone. However, they are typically considered to reduce the permeability and porosity of host rocks due to (i) the cementation and precipitation of dissolved materials in pores within the immediately surrounding rock and (ii) the accumulation of insoluble, fine-grained and low-permeability material on their surfaces. Recent studies in carbonates challenged this assumption, demonstrating that burial stylolites can be preferential pathways for karst dissolution.We present here new data on the petrophysical properties of Cretaceous micritic limestone from the Lessini Mountains, Veneto, Italian Southern Alps, where much of the exposed, generally sub-horizontal Mesozoic carbonate succession underwent pervasive dolomitization during Eocene extensional tectonics and the onset of the Venetian Volcanic Province magmatism. Petrographic analyses, Hg-porosimetry, and He-pycnometry were applied to assess the effects of Mg-rich fluids, probably connected with the volcanic environment, on micritic limestone. Preliminary results indicate that burial stylolites developed in low porosity limestone are selectively dolomitized, with dolomitization seams 1-10 mm thick, suggesting pervasive bedding-parallel fluid flow. Dolomitization occurred also along vertical fractures and in fracture meshes of mosaic breccias, suggesting across-bedding Mg-rich fluid circulation associated with normal faults accommodating.Dolomitization significantly increased rock density from ~2.65 g/cm³ in the pristine micritic limestone to ~2.9 g/cm³ in the fully dolomitized rock. Additionally, pore size, porosity, and the capillary threshold pressure of Hg injection change gradually but substantially from the limestone to the dolomite, with median pore sizes increasing from ~0.012 μm to ~0.33 μm, porosity from ~3.2% to 21.8%, and capillary threshold values decreasing from ~5140 to ~35 PSI.These results demonstrate that, under specific conditions, stylolites can actually serve as effective pathways for fluid ingress/migration and thus promote fluid-rock interaction in rocks characterized by overall low porosity and permeability (e.g., micritic limestone). Furthermore, we show that dolomitization significantly modified the petrophysical rock properties, further enhancing fluid ingress and likely promoting fracturing and brecciation by changing rheology, with consequences for deformation localization and partitioning during later tectonic activity.
- Open Access
- 18 March 2025
- Published by Copernicus GmbH
Late-alpine evolution in the Eastern Mediterranean region: temporal constraints on the post-orogenic extension from the crustal-scale brittle Mykonos Detachment (Aegean Realm, Cyclades)
The Mediterranean region results from multiple tectonics, with alternating contractional (e.g., Variscan, Alpine) and extensional phases (e.g., Tethyan), that shaped the present-day structural configuration. Since the Cretaceous, most of the Mediterranean realm experienced complex contractional tectonics, leading to the formation of a part of the Alpine-Himalayan orogeny, with different deformation styles, conditions and absolute timing, often in relation to paleogeographic and paleo-tectonics inheritance.The Aegean Realm, located in the eastern Mediterranean region, provides an ideal setting to study the interplay between contractional and extensional tectonics, with the latter related to the late, post-orogenic extension following the onset and evolution of the Alpine contractional phase. The extension was there accommodated by crustal-scale detachments, exhuming metamorphosed rocks of the Cycladic Blueschist Unit and syn-tectonic granite bodies in the context of the Aegean Metamorphic Core Complex (AMCC). The completely brittle Mykonos Detachment (MD), together with the basal and structurally lower ductile Livada Detachment (LD), belongs to the North Cycladic Detachment System and allowed the exhumation and unroofing of the syn-tectonic Middle Miocene (14-15Ma) granite that part of the northern sector of the Aegean Sea. Despite their importance in shaping that part of the AMCC, absolute ages on the activation of the brittle MD or the ductile LD in Mikonos Island, and a detailed description of the internal architecture of the MD are still not available and/or debated, where the MD is indirectly thought to be active since 10Ma.Aiming to fill this gap, here we present the results of a detailed architectural and geochronological study of the MD where we identified at least 7 different gouge layers that compose the core of the fault zone as it is exposed in the northeastern sector of Mykonos Island. Gouge layers are surrounded by thick SCC’ domains, reasonably representing the beginning of the fault zone formation. Brittle Structural Facies – based structural analysis with K-Ar dating on authigenic illite-smectite from 7 fault gouge(s) yielded 6 different ages spanning from the Middle Miocene (13.34±0.77 Ma), coeval to the granite, to the Late Miocene (6.37±0.21 Ma), represented by the youngest gouge that is, moreover, cut by the younger principal slip surface of MD.These ages, coupled with a high-resolution structural analysis, constrained at least 7 Myrs of protracted deformation along the same fault zone and focused the attention on the importance of such completely brittle detachments that do not ever thus represent a late deformation phase after a former ductile, deeper shearing. Indeed, these new structural and chronologic data indicate that upper crustal brittle deformation was coeval to the lower crustal ductile deformation during a large part of the evolution of a crustal-scale detachment and during the entire exhumation of the syn-tectonic granite. Such structures, thus, potentially represent(ed) pivotal structural features in shaping the present Mediterranean configuration by allowing the exhumation of syn-tectonic granites and the formation of the AMCC.
- 18 March 2025
- Published by Copernicus GmbH
Open AccessLate-alpine evolution in the Eastern Mediterranean region: temporal constraints on the post-orogenic extension from the crustal-scale brittle Mykonos Detachment (Aegean Realm, Cyclades)
The Mediterranean region results from multiple tectonics, with alternating contractional (e.g., Variscan, Alpine) and extensional phases (e.g., Tethyan), that shaped the present-day structural configuration. Since the Cretaceous, most of the Mediterranean realm experienced complex contractional tectonics, leading to the formation of a part of the Alpine-Himalayan orogeny, with different deformation styles, conditions and absolute timing, often in relation to paleogeographic and paleo-tectonics inheritance.The Aegean Realm, located in the eastern Mediterranean region, provides an ideal setting to study the interplay between contractional and extensional tectonics, with the latter related to the late, post-orogenic extension following the onset and evolution of the Alpine contractional phase. The extension was there accommodated by crustal-scale detachments, exhuming metamorphosed rocks of the Cycladic Blueschist Unit and syn-tectonic granite bodies in the context of the Aegean Metamorphic Core Complex (AMCC). The completely brittle Mykonos Detachment (MD), together with the basal and structurally lower ductile Livada Detachment (LD), belongs to the North Cycladic Detachment System and allowed the exhumation and unroofing of the syn-tectonic Middle Miocene (14-15Ma) granite that part of the northern sector of the Aegean Sea. Despite their importance in shaping that part of the AMCC, absolute ages on the activation of the brittle MD or the ductile LD in Mikonos Island, and a detailed description of the internal architecture of the MD are still not available and/or debated, where the MD is indirectly thought to be active since 10Ma.Aiming to fill this gap, here we present the results of a detailed architectural and geochronological study of the MD where we identified at least 7 different gouge layers that compose the core of the fault zone as it is exposed in the northeastern sector of Mykonos Island. Gouge layers are surrounded by thick SCC’ domains, reasonably representing the beginning of the fault zone formation. Brittle Structural Facies – based structural analysis with K-Ar dating on authigenic illite-smectite from 7 fault gouge(s) yielded 6 different ages spanning from the Middle Miocene (13.34±0.77 Ma), coeval to the granite, to the Late Miocene (6.37±0.21 Ma), represented by the youngest gouge that is, moreover, cut by the younger principal slip surface of MD.These ages, coupled with a high-resolution structural analysis, constrained at least 7 Myrs of protracted deformation along the same fault zone and focused the attention on the importance of such completely brittle detachments that do not ever thus represent a late deformation phase after a former ductile, deeper shearing. Indeed, these new structural and chronologic data indicate that upper crustal brittle deformation was coeval to the lower crustal ductile deformation during a large part of the evolution of a crustal-scale detachment and during the entire exhumation of the syn-tectonic granite. Such structures, thus, potentially represent(ed) pivotal structural features in shaping the present Mediterranean configuration by allowing the exhumation of syn-tectonic granites and the formation of the AMCC.
- Open Access
- 20 January 2025
- Published by Copernicus GmbH
Evolution and activation of an orogen-scale shear zone in the northern Aegean Rift System: insights from the Mykonos Detachment, Cyclades, Greece
Extensional detachments are commonly considered key structures in accommodating the exhumation of deeply buried or subducted crustal slivers, and in facilitating the syndeformation emplacement of plutons during the evolution of wide rift systems (i.e., Basin and Range type). In those settings, ductile shear zones and brittle faults may act for several million years to accommodate important vertical and horizontal displacements such that multiply reactivated and highly complex shear zones and faults may form. The analysis of these complexities, together with the possibility to constrain the age of strain and deformation localisation, is thus pivotal in reconstructing the onset and evolution of the processes that steer(ed) the crustal extension.Aiming at better understanding these structural/chronological intricacies, we have studied the brittle Mykonos Detachment (MD), which is thought to have facilitated the emplacement of the Mykonos granite starting in the Middle Miocene (~14-9 Ma) and following the activation of the earlier (ductile) Livada Detachment (LD) that would have favoured the beginning of pluton cooling during the structuring of the Aegean rifting. The Mid. Miocene age of the MD is, however, only loosely constrained by the stratigraphic age of syn-tectonic siliciclastic deposits in the hanging wall of the fault. No absolute ages exist yet on the activation of the brittle MD or the ductile LD, and a detailed description of the internal architecture of the MD is still not available.Aiming to fill this gap(s), we carried out a detailed study that couples a Brittle Structural Facies – based structural analysis with K-Ar dating on authigenic illite from fault gouge(s) that compose the MD fault core. Fault gouges normally rest on and are cut by the MD principal slip surface (PSS), which reasonably postdates the gouge formation and represents the effects of the latest fault activity. We have obtained a 7.1 ± 0.1 Ma K-Ar age from a fault gouge suggesting that the MD activation postdated the widely accepted ~14-9 Ma of the granite cooling, also considering that the PSS postdates the 7.1 Ma gouge, as indicated by field evidence. On this ground, together with published thermochronological data showing that the granite experienced a rapid cooling from ~14 to ~11 Ma before experiencing slow cooling until ~9 Ma, we can state that most of the granite exhumation cannot be ascribed to the MD, the activation of which postdates the late stage of the granite cooling.These new geochronological data (which are soon to be implemented with new K-Ar dates) and the description of the architectural evolution of the MD fault zone, stress the role of the detachment during the unroofing of the Mykonos granite in the Aegean rifting context. In this perspective, the granite exhumed is mostly assisted by the ductile LD, which acted before the MD. The latter acted instead only at a later stage when it juxtaposed the Miocene siliciclastic against an already cooled and unroofed granite, which had reached a temperature of ~40°C about 2Ma before the latest Late Miocene activation of the MD, as shown by our preliminary age constraint.
- 20 January 2025
- Published by Copernicus GmbH
Open AccessEvolution and activation of an orogen-scale shear zone in the northern Aegean Rift System: insights from the Mykonos Detachment, Cyclades, Greece
Extensional detachments are commonly considered key structures in accommodating the exhumation of deeply buried or subducted crustal slivers, and in facilitating the syndeformation emplacement of plutons during the evolution of wide rift systems (i.e., Basin and Range type). In those settings, ductile shear zones and brittle faults may act for several million years to accommodate important vertical and horizontal displacements such that multiply reactivated and highly complex shear zones and faults may form. The analysis of these complexities, together with the possibility to constrain the age of strain and deformation localisation, is thus pivotal in reconstructing the onset and evolution of the processes that steer(ed) the crustal extension.Aiming at better understanding these structural/chronological intricacies, we have studied the brittle Mykonos Detachment (MD), which is thought to have facilitated the emplacement of the Mykonos granite starting in the Middle Miocene (~14-9 Ma) and following the activation of the earlier (ductile) Livada Detachment (LD) that would have favoured the beginning of pluton cooling during the structuring of the Aegean rifting. The Mid. Miocene age of the MD is, however, only loosely constrained by the stratigraphic age of syn-tectonic siliciclastic deposits in the hanging wall of the fault. No absolute ages exist yet on the activation of the brittle MD or the ductile LD, and a detailed description of the internal architecture of the MD is still not available.Aiming to fill this gap(s), we carried out a detailed study that couples a Brittle Structural Facies – based structural analysis with K-Ar dating on authigenic illite from fault gouge(s) that compose the MD fault core. Fault gouges normally rest on and are cut by the MD principal slip surface (PSS), which reasonably postdates the gouge formation and represents the effects of the latest fault activity. We have obtained a 7.1 ± 0.1 Ma K-Ar age from a fault gouge suggesting that the MD activation postdated the widely accepted ~14-9 Ma of the granite cooling, also considering that the PSS postdates the 7.1 Ma gouge, as indicated by field evidence. On this ground, together with published thermochronological data showing that the granite experienced a rapid cooling from ~14 to ~11 Ma before experiencing slow cooling until ~9 Ma, we can state that most of the granite exhumation cannot be ascribed to the MD, the activation of which postdates the late stage of the granite cooling.These new geochronological data (which are soon to be implemented with new K-Ar dates) and the description of the architectural evolution of the MD fault zone, stress the role of the detachment during the unroofing of the Mykonos granite in the Aegean rifting context. In this perspective, the granite exhumed is mostly assisted by the ductile LD, which acted before the MD. The latter acted instead only at a later stage when it juxtaposed the Miocene siliciclastic against an already cooled and unroofed granite, which had reached a temperature of ~40°C about 2Ma before the latest Late Miocene activation of the MD, as shown by our preliminary age constraint.
- Open Access
- 7 November 2024
- Published by Elsevier in Earth and Planetary Science Letters
- Vol. 648
How brittle detachments form and evolve through space and time
- 7 November 2024
- Published by Elsevier in Earth and Planetary Science Letters
- Vol. 648
Open AccessHow brittle detachments form and evolve through space and time
- Open Access
- 4 March 2024
- Published by American Geophysical Union (AGU) in Tectonics
- Vol. 43 (3) , 1-30
Tectonic Evolution of the Eastern Southern Alps (Italy): A Reappraisal From New Structural Data and Geochronological Constraints
The Eastern Southern Alps fold‐and‐thrust belt (ESA) is part of the seismically active S‐verging retro‐wedge of the European Alps. Its temporal tectonic evolution during continental shortening has so far been constrained by few and low‐resolution indirect time constraints. Aiming at better elucidating the ESA spatiotemporal evolution, we gathered new structural and geochronological data from two regional thrust systems: the innermost south verging Valsugana Thrust (VT) and the more external Belluno Thrust System (BTS). Field work allowed us to constrain the geometry and kinematics of those thrusts and related folds and informed our sampling strategy to carry out fault gouge K‐Ar and tectonic carbonate U‐Pb dating from representative samples structurally associated with the VT and BTS. Our results suggest that the VT was active already in the Late Cretaceous (between ∼78 and 76 Ma) in response to far‐field stresses, with repeated reactivation continuing to the Late Miocene (∼6 Ma). The BTS recorded two distinct deformation events during the Oligocene (∼30 Ma) and at the Oligocene‐Miocene boundary (∼23 Ma). The VT was active for ∼72 Myr and partly acted during out‐of‐sequence thrusting. Based on regional correlations, we propose that the ESA share a similar spatiotemporal deformation history with the central Southern Alps farther to the west. We suggest a conceptual regional tectonic model wherein multiple, broadly coeval deformation events occurred in the entire Southern Alps during their long‐lived orogenic deformation in response to generally continuous NW‐SE shortening.
- 4 March 2024
- Published by American Geophysical Union (AGU) in Tectonics
- Vol. 43 (3) , 1-30
Open AccessTectonic Evolution of the Eastern Southern Alps (Italy): A Reappraisal From New Structural Data and Geochronological Constraints
The Eastern Southern Alps fold‐and‐thrust belt (ESA) is part of the seismically active S‐verging retro‐wedge of the European Alps. Its temporal tectonic evolution during continental shortening has so far been constrained by few and low‐resolution indirect time constraints. Aiming at better elucidating the ESA spatiotemporal evolution, we gathered new structural and geochronological data from two regional thrust systems: the innermost south verging Valsugana Thrust (VT) and the more external Belluno Thrust System (BTS). Field work allowed us to constrain the geometry and kinematics of those thrusts and related folds and informed our sampling strategy to carry out fault gouge K‐Ar and tectonic carbonate U‐Pb dating from representative samples structurally associated with the VT and BTS. Our results suggest that the VT was active already in the Late Cretaceous (between ∼78 and 76 Ma) in response to far‐field stresses, with repeated reactivation continuing to the Late Miocene (∼6 Ma). The BTS recorded two distinct deformation events during the Oligocene (∼30 Ma) and at the Oligocene‐Miocene boundary (∼23 Ma). The VT was active for ∼72 Myr and partly acted during out‐of‐sequence thrusting. Based on regional correlations, we propose that the ESA share a similar spatiotemporal deformation history with the central Southern Alps farther to the west. We suggest a conceptual regional tectonic model wherein multiple, broadly coeval deformation events occurred in the entire Southern Alps during their long‐lived orogenic deformation in response to generally continuous NW‐SE shortening.