JHJianchang Huang

Jianchang Huang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Jianchang Huang has a total of 30 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Real-World Autonomous Driving: Exploring Energy Dynamics in Gradually Evolving Traffic Flows

    by Jianchang Huang, Hongliang Liu, Xin Wang, Qinghai Lin, Guohua Song, Pengfei Fan, Lei Yu

    In car-following scenarios, trailing vehicles tend to fluctuate around the motion of the lead vehicle and gradually converge toward their preferred trajectories. With the large-scale integration of autonomous vehicles (AVs) into traffic streams, differences in desired trajectories among vehicles are amplified. This amplification intensifies fluctuation propagation and complicates platoon-level energy consumption mechanisms. This study addresses these dynamics through the development of a mixed-platoon energy consumption estimation model that accounts for gradually evolving traffic flows (MP-ECEMG), incorporating real-world data from light-duty human-driven vehicles (HVs) and AVs. Results indicate that the model leads to a broader range of energy consumption variation than conventional models due to complex vehicle interactions, while the transitions of energy consumption between vehicles are smoother than those predicted for theoretical AVs. For the three powertrains examined, potential energy savings at a 0.5 AV penetration rate (PR) are 11.4%, 18.1%, and 41.8% for internal combustion engine vehicles (ICEVs), recovery electric vehicles (EVs), and non-recovery EVs, respectively. In contrast, actual savings based on AV testing data in Apolloscope are 2.9%, 4.7%, and 11.5%. Regional energy performance is comparable between Apolloscope and Waymo, with both slightly outperforming A2D2. This study provides key insights into the effects of real-world AV technology on energy consumption.

  • A Four-Factor Fundamental Diagram Model for Autonomous Vehicles: Flow, Speed, Density, and Energy

    by Jianchang Huang, Pengfei Fan, Sun Yi, Qinghai Lin, Xin Wang, Guohua Song, Lei Yu

    The large-scale integration of autonomous vehicles (AVs) has led to fundamental changes in the energy consumption evolution mechanism of new hybrid traffic flows, rendering conventional mapping between traffic flow parameters and energy invalid. This study develops a “flow–speed–density–energy” model for hybrid traffic composed of autonomous and human-driven vehicles (HVs). In this study, energy (kJ/km/h) is mathematically expressed as the product of the energy factor (kJ/km/veh) and traffic flow (veh/h). By constructing flow and energy factor curves with varying penetration rates and platoon intensities, the study derives four–factor diagrams for hybrid traffic flows. The analysis yields several key findings. First, for internal combustion engine vehicles (ICEVs), energy in HV platoons decreases with increasing speed, whereas in AV platoons it first decreases and then rises as flow intensifies under high-speed conditions. Second, energy is inversely correlated with density, reflecting the negative speed–density relationship. Under uncongested conditions, energy increases with flow, while in congested regimes, sharp reductions in the energy factor leads to overall energy decline. Finally, the primary difference between electric vehicles (EVs) and ICEVs lies in the low-speed range, where the energy of ICEVs decreases rapidly with increasing speed, whereas the energy of EVs increases due to the slower decline of the energy factor and faster flow growth. This study addresses the challenges in the operation and energy consumption of hybrid traffic flow at the macroscopic traffic level, providing foundational support for energy management.


  • Dynamic Evaluation Method for Urban Road Network Resilience Based on Congestion Propagation and Dissipation

    by Huiting Zhang, Guohua Song, Feng He, Zhe Tan, Jianchang Huang

    Urban road networks are often affected by natural disasters, such as rainstorms, with consequences spreading from partial failures to massive network-wide disruptions. The pattern of road network resilience is grasped by capturing the changes in the failure process of the road network cascade. This research presents a method for dynamic evaluation of road network resilience, with extreme rainstorm weather as the background. The fundamental diagram of traffic flow is adopted into the shock wave model to obtain the congestion propagation and dissipation model with speed as input quantity. Then, it is networked and applied to the road network to develop a cascading failure model. The model can be used to identify critical nodes, combining the Monte Carlo method and Dijkstra algorithm, as well as to construct time-varying evolution scenarios of road network resilience when critical nodes are broken. Furthermore, VA (the variations of all OD pairs in the road network) and RI (the resilience indicators of road network) indexes for dynamic evaluation of road network resilience are developed, that visualize the resilience of the road network for a specific region, a specific event, and a specific time. In the case study, the proposed method is employed to evaluate the resilience of the urban road network under a real case of the Zhengzhou 720 rainstorm in China, and its practicality is verified.


  • Energetic Impacts of Autonomous Vehicles in Real-World Traffic Conditions From Nine Open-Source Datasets

    by Jianchang Huang, Guohua Song, Feng He, Zhe Tan

    Potential increases or decreases in energy consumption for various traffic operation modes is a research focus in light-duty autonomous vehicle (AV) studies. However, AVs have unclear energy consumption patterns compared with human-driving vehicles (HV), especially under diverse real-world traffic conditions. Considering nine open-source AV activity datasets from six nations, three nontrivial characteristics of light-duty AVs under real traffic conditions were found. 1) The energy consumption of AVs was similar to that of HVs in the low-speed range and was lower than HVs in the high-speed range. 2) The turning point between low-speed and high-speed was a variable parameter for different data sources. 3) The energy consumption of AVs may be higher than that of HVs under complex traffic conditions in the high-speed range. Based on a vehicle-specific power distribution model, this study developed an AV energy consumption model under real traffic conditions at average speeds of 10 to 100 km/h. Potential energy consumption savings and losses were determined using two parameters: the turning point between low-speed and high-speed and the rate of change in vehicle-specific power standard deviation in the high-speed range. Under real traffic conditions, the results implied that light-duty AVs had the potential to reduce energy consumption by 3.78% to 26.47% under stable conditions but could also increase energy consumption by 3.25% to 48.93% compared with light-duty HVs under unstable conditions.


  • Open Access

    A fuel consumption model for mixed traffic flow in multiple connected and autonomous scenarios

    by Jianchang Huang, Guohua Song, Yizheng Wu, Zhiqiang Zhai, Zeyu Zhang, Leqi Zhang

    The potential increase/decrease in energy consumption of traffic operation modes is a hot topic in the studies of connected and autonomous vehicles (CAVs), but there are few theoretical studies on the fuel consumption of human driving vehicles (HDVs) and CAV mixed platoon as a result of limited data. Based on the power distribution of light‐duty vehicles, this study developed a fuel consumption model for HDV and CAV mixed platoons by theoretical hypothesis considering the oscillation along with the platoon. Firstly, a vehicle‐specific power (VSP) distribution conforming to normal distribution is constructed with hypothesis‐based VSP standard deviation and constant VSP average value at each speed bin under different platoon arrangement conditions. Then, the fuel factors (mL/km) are calculated by weighted fuel rate (mL/s) according to the VSP distribution. Finally, a library of fuel consumption values for multiple penetration rates, platoon intensities, and speeds was established. In the case, at a speed of 30 km/h, the fuel consumption in the CAV group was reduced by 0.8–5%, 1.9–12.5%, 8.6–12%, and 12.4%, respectively, at the penetration rate of 20%, 50%, 80%, and 100%, compared to the HDV group. The fuel consumption reduction effect of CAV was negatively correlated with the speed.


  • Open Access

    Evaluation of Real-World Fuel Consumption of Hybrid-Electric Passenger Car Based on Speed-Specific Vehicle Power Distributions

    by Fei Peng, Ye Zhang, Guohua Song, Jianchang Huang, Zhiqiang Zhai, Lei Yu

    Fuel consumption differs between the hybrid electric vehicle (HEV) and the conventional vehicle (CV). However, traditional fuel consumption models developed for CVs are commonly applied to HEVs, which leads to uncertainties in the quantitative evaluation of energy consumption for passenger cars in traffic road networks. Considering the internal combustion engine (ICE) operating modes of hybrid vehicles among varying vehicle specific power (VSP) demand, we present a method to incorporate the HEV ICE speed to develop speed-specific VSP distributions for real-world driving conditions. Using vehicle trajectory and fuel consumption data in real traffic conditions, the results of this study show that the application of methods developed for CVs leads to a significant underestimation of fuel consumption for HEVs when the average speed is in the high-speed range (over 50 km/h) and a significant overestimation of fuel consumption when the average speed is in the low-speed range (below 30 km/h). The average relative error of the measured fuel consumption factor in each speed bin is 7.1% compared with real-world observations, which is an unacceptably large error. This paper proposes a method to develop the speed-specific VSP distribution, considering whether the internal combustion engine (ICE) of HEVs is on or off. This approach reduces the average relative error of the obtained fuel consumption compared with real-world observations to 2.2%, and the measuring accuracy at different average speeds is significantly improved. This method enhances the functionality and applicability of the VSP theory-based traffic energy model for HEVs.


  • High-Resolution Fuel Consumption Model for Better Characterizations of High-Speed Scenarios

    by Jianchang Huang, Guohua Song, Zeyu Zhang, Yun Jiang

    A detailed and accurate fuel model fuel consumption model that reflects real-world fuel consumption is required as input for devising and executing a model policy for prospective regulatory tools. The fuel consumption model based on the vehicle-specific power (VSP) has rapidly become the primary development direction since the release of the Motor Vehicle Emissions Simulator (MOVES) model. However, fuel consumption cannot be accurately characterized under high-speed scenarios. This work develops two fuel consumption models for the light-duty (gasoline) vehicles that can better characterize fuel consumption for light-duty vehicles under high-speed scenarios. For model 1, the VSP of −5kW/ton is a crucial turning point. When VSP∈ [−30, −5] kW/ton, the fuel rate is only determined by speed. When VSP∈(−5, 30], the fuel rate will gradually increase with VSP, and the growth characteristics will vary with speed. Model 2 develops the new interpretations for VSP and forms the one-to-one correspondence between the fuel rate and the new VSP. The two models can separately improve the accuracy by 12.2% and 13.8% compared with the conventional model. The fuel factor differences become significant when speed is higher than 65 km/h, which are separately 30.66% and 28.13% higher than the conventional VSP model when the speed is 100 km/h. Further, the fuel factors of the two models for freeways are, respectively, 6.33% and 7.56% higher than the conventional VSP model, and the distinction for arterial, collector, and local street roads is not notable.


  • Open Access

    The Impact of Pedestrian and Nonmotorized Vehicle Violations on Vehicle Emissions at Signalized Intersections in the Real World: A Case Study in Beijing

    by Jianchang Huang, Guohua Song, Jianbo Zhang, Zufen Li, Yizheng Wu, Lei Yu

    Emission around intersections has become an issue in the urban traffic network. This paper aims to investigate the impact of pedestrian and nonmotorized vehicle violations on emissions at mixed-traffic flow intersection based on the volumes of vehicles, nonmotor vehicles, and pedestrians. Also, it focuses on the arterial and collector intersections with high vehicle volume and limited space. Running red light and crossing intersection diagonally are two critical violations, accounting for 91.75% of effective violations (interference with vehicles’ operation). In this context, a violation blocking model is developed to estimate the blocking probability for each vehicle based on the volumes of pedestrians and nonmotor vehicles. The model includes two scenarios. (1) Through phase: the violation blocking model of running red light is developed based on the survival curve (the relationship between waiting time and running red light probability). (2) Left-turn phase: the violation blocking model at this phase includes two parts: (i) crossing the intersection diagonally model is developed for the first vehicle and (ii) running red light model is developed for subsequent vehicles. The existing emission model can estimate the emissions based on the blocking positions. In the case study, emissions increase with the vehicle volume approaching the saturated flow rate and the volumes of nonmotor vehicles and pedestrians increasing. Results show that the maximum emission increase of CO (carbon monoxide) for through phase and left-turn phase can reach 16.7% and 36.4%.