PLPeng-Zhi Li

Peng-Zhi Li

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Peng-Zhi Li has a total of 7 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Hysteresis Modelling and Feedforward Control of Piezoelectric Actuator Based on Simplified Interval Type-2 Fuzzy System

    by Peng-Zhi Li, De-Fu Zhang, Jun-Yan Hu, Barry Lennox, Farshad Arvin

    The piezoelectric actuator is indispensable for driving the micro-manipulator. In this paper, a simplified interval type-2 (IT2) fuzzy system is proposed for hysteresis modelling and feedforward control of a piezoelectric actuator. The partial derivative of the output of IT2 fuzzy system with respect to the modelling parameters can be analytically computed with the antecedent part of IT2 fuzzy rule specifically designed. In the experiments, gradient based optimization was used to identify the IT2 fuzzy hysteresis model. Results showed that the maximum error of model identification is 0.42% with only 3 developed IT2 fuzzy rules. Moreover, the model validation was conducted to demonstrate the generalization performance of the identified model. Based on the analytic inverse of the developed model, feedforward control experiment for tracking sinusoidal trajectory of 20 Hz was carried out. As a result, the hysteresis effect of the piezoelectric actuator was reduced with the maximum tracking error being 4.6%. Experimental results indicated an improved performance of the proposed IT2 fuzzy system for hysteresis modelling and feedforward control of the piezoelectric actuator.


  • Open Access

    High-precision compliant mechanism for lens XY micro-adjustment

    by Lei Zhao, Xinfeng Yu, Pengzhi Li, Yanfeng Qiao

    The high resolution of lithography lenses has led to a requirement for high-precision lens-adjusting compensators. This paper presents the design, analysis, and testing of a high-precision two-degrees-of-freedom compliant mechanism to be used for lens XY micro-adjustment. The monolithic mechanism, which is based on a 1RR–2RRR configuration, uses flexure hinges to connect the movable inner ring with the fixed outer ring. The apparatus is driven using two piezoelectric actuators, and the lens terminal displacement is fed back in real time using two capacitive sensors. This paper describes the principle of the mechanism. Simulations and experiments are then performed to evaluate the system. The results show that the strokes along both the x-axis and the y-axis exceed ±25 µm. The accuracy of the proposed mechanism is better than ±7 nm. The root-mean-square induced figure error is better than 0.051 nm. The coupling z and tip/tilt rigid motions are less than 50 nm and 220 mas, respectively. The first natural frequency of the mechanism is 212 Hz. These results indicate that the mechanism has advantages that include high accuracy, low coupling errors, high rigidity, and compactness and that it will act as an efficient compensator for lithography lenses.