BLBernard Ludwig

Bernard Ludwig

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Bernard Ludwig has a total of 110 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Temporal Dynamics of Soil Organic Carbon Contents in Long‐Term Monitored Arable Sites in Lower Saxony, Germany

    by Bernard Ludwig, Hans‐Peter Piepho, Heinrich Höper

    Background: Temporal changes in soil organic carbon (SOC) contents in agricultural soils are variable, and underlying drivers are not sufficiently understood. Aim: The objectives were to describe the long‐term dynamics of SOC contents at 41 sites in Lower Saxony, Germany, and to analyze the relationships between estimated long‐term changes of SOC contents and climate, soil, and agricultural management data. Methods: Mixed‐effects regression models with observation weights were calculated for each site to estimate long‐term SOC changes (ΔSOC), and the long‐term ΔSOC values were then described using climate, soil, and agricultural management variables. Results: The fitted regression lines for the temporal trajectories of SOC dynamics fell within the 95% confidence intervals of the annual mean SOC values in 96% of the observations, consistent with the expected coverage under a well‐fitting model. Multiple linear regression modeling for the estimated long‐term ΔSOC values explained the estimated ΔSOC variation satisfactorily (coefficient of determination R 2 = 0.77) and identified four variables with significant contributions: the initial SOC content with a negative regression coefficient and the initial pH, initial proportion of years with catch crops, and the clay content with positive regression coefficients. Conclusions: The results suggest that initial soil properties (SOC content and pH) and agricultural management, as well as the clay content may explain temporal changes in SOC contents to a large extent.

  • Open Access

    Comparison of in-situ and ex-situ portable x-ray fluorescence model accuracy and prediction mechanisms for soil properties across a region

    by Isabel Greenberg, Michael Seidel, Michael Vohland, Volker Karius, Bernard Ludwig

  • Open Access

    Fusion of Vis‐Near and Mid‐Infrared Spectroscopic Data for a Prediction of Biochar C, Native Soil Organic C and Root C in a Designed Experiment With Loess Soils

    by Simon Kohlmann, Isabel Greenberg, Bernard Ludwig

    Background: The accuracy of predictions using visible to near‐infrared (vis–NIR) and mid‐infrared (MIR) spectroscopy for different organic compounds in arable soils is not sufficiently quantified and designed experiments are useful to assess the potential.Aim: Objectives were to quantify the predictive accuracy of regressions using MIR and vis–NIR spectra for total organic carbon (OC), native soil OC (native SOC), aged biochar and root C in loess soils.Methods: Maize roots and biochar were added at mean rates (± standard deviation) of 2 (±0.5) and 15 (±3.75) g C kg−1 to soils from three different loess sites to obtain 450 soils and their spectra were recorded. Partial least squares regression (PLSR) and support vector machine regressions (SVMR) were used in three‐fold partitioning with (1) pseudo‐independent calibration and validation and (2) calibration and validation for the respective sites with and without spiking.Results: Data fusion (concatenation or outer product analysis) using SVMR were the most successful approaches in the validations for all training strategies (0.81 ≤ mean R2 ≤ 0.98) for total OC, added biochar C, combined native SOC + added root C, and native SOC, but failed to accurately predict added root C separately from total OC. Variable importance in the projection of PLSR indicated a good differentiation between biochar C and other organic compounds, but not between native SOC + added root C and native SOC.Conclusions: For rates of root and biochar C inputs which are typical in agricultural experiments, fusion and spiking allowed a quantitative differentiation of total OC into biochar C and native SOC + root C, but not a separate quantification of root C.


  • Open Access

    Short‐Term Dynamics of Low Molecular Weight Organic Substances and Biochar in Arable Soils

    by Simon Kohlmann, Isabel Greenberg, Rainer Georg Joergensen, Michaela A. Dippold, Bernard Ludwig

    Background: Main transformation pathways of low molecular weight organic substances (LMWOS) are understood, but only limited knowledge exists on their transformations in different soils and on their interactions with biochar.Aim: Objectives were to study short‐term pathways of 13C‐labelled LMWOS with different functional groups in the presence and absence of biochar in arable loess soils.Methods: Soils from three sites were incubated with or without artificially aged biochar and 13C‐labelled acetate, alanine or glucose at different rates (10 or 50 µmol C g−1 soil) at 60% water holding capacity and 15°C for 5 days, and total and substrate‐derived CO2‐C and microbial biomass C (MBC) were determined and analyses of variance were calculated.Results: Cumulative CO2‐C (ΣCO2‐C) emission was significantly (p ≤ 0.05) affected by substrate rate and type and their interaction. Biochar significantly stimulated total, but not substrate‐derived ΣCO2‐C (ΣCO2‐CSD) emission. Box‐Cox transformed MBC was significantly affected by site, substrate rate and type, whereas biochar had no significant effect. Substrate‐derived MBC (MBCSD) and carbon use efficiency (CUE) were significantly affected by site, substrate rate and type and their interaction.Conclusions: MBCSD and CUE results at low addition rate confirmed the greater importance of glucose for the build‐up of MBC compared to acetate and alanine, whereas the latter were mineralized to a greater extent. Biochar, once it is aged, which is the typical biochar form in soil, did not significantly affect build‐up of MBCSD and CUE and only slightly increased total, but not ΣCO2‐CSD emission.


  • Open Access

    Optimization of sample preparation and data evaluation techniques for X‐ray fluorescence prediction of soil texture, pH, and cation exchange capacity of loess soils

    by Isabel Greenberg, Anja Sawallisch, Jan Stelling, Michael Vohland, Bernard Ludwig

    Use of X‐ray fluorescence (XRF) spectrometry for estimation of soil texture, pH, and cation exchange capacity (CEC) is desirable given the time‐consuming nature of traditional methods. Recent studies have shown promising results; however, further investigation is required to determine the effects of sample preparation and data evaluation techniques on accuracy. Our objective was to compare (I) a simple but well‐founded approach, combining measurement of powder samples and modeling with elemental contents as predictors in stepwise multiple linear regressions (MLR), with alternative approaches including (II) use of partial least squares regression (PLSR), (III) sample preparation as a pressed pellet, and (IV) spectral intensities as predictors (20 kV, 40 kV, and concatenated 20 + 40 kV). A total of 395 loess soils from three arable fields were used with a fivefold random training‐testing approach and a hold‐one‐site‐out training‐testing approach. With random partitioning, clay, silt, and sand accuracy with approach I was excellent (ratio of performance to interquartile distance in validation (RPIQv) = 8.5–12.9), while pH and CEC estimations were satisfactory to excellent (RPIQv = 2.0–2.5 and 2.2–3.3, respectively). Differences between MLR and PLSR were negligible. Increases in accuracy with pellet samples were 1%–13% of RPIQv for 20 kV intensities, but effects were inconsistent for other predictors. The optimal predictor varied by property, and differences ranged from 3% to 13% of RPIQv. Improvements to accuracy from Approach I to the best alternative were largest for texture (10%–15%) but may be superfluous given the excellent accuracy across all approaches. Although the leave‐one‐site‐out training resulted in variable performance, inclusion of soils from the target site in training assured reliable accuracy.


  • Open Access

    Optimised use of data fusion and memory‐based learning with an Austrian soil library for predictions with infrared data

    by Bernard Ludwig, Isabel Greenberg, Michael Vohland, Kerstin Michel

    Infrared spectroscopy in the visible to near‐infrared (vis–NIR) and mid‐infrared (MIR) regions is a well‐established approach for the prediction of soil properties. Different data fusion and training approaches exist, and the optimal procedures are yet undefined and may depend on the heterogeneity present in the set and on the considered scale. The objectives were to test the usefulness of partial least squares regressions (PLSRs) for soil organic carbon (SOC), total carbon (C t ), total nitrogen (N t ) and pH using vis–NIR and MIR spectroscopy for an independent validation after standard calibration (use of a general PLSR model) or using memory‐based learning (MBL) with and without spiking for a national spectral database. Data fusion approaches were simple concatenation of spectra, outer product analysis (OPA) and model averaging. In total, 481 soils from an Austrian forest soil archive were measured in the vis–NIR and MIR regions, and regressions were calculated. Fivefold calibration‐validation approaches were carried out with a region‐related split of spectra to implement independent validations with n ranging from 47 to 99 soils in different folds. MIR predictions were generally superior over vis–NIR predictions. For all properties, optimal predictions were obtained with data fusion, with OPA and spectra concatenation outperforming model averaging. The greatest robustness of performance was found for OPA and MBL with spiking with R 2 ≥ 0.77 (N), 0.85 (SOC), 0.86 (pH) and 0.88 (C t ) in the validations of all folds. Overall, the results indicate that the combination of OPA for vis–NIR and MIR spectra with MBL and spiking has a high potential to accurately estimate properties when using large‐scale soil spectral libraries as reference data. However, the reduction of cost‐effectiveness using two spectrometers needs to be weighed against the potential increase in accuracy compared to a single MIR spectroscopy approach.


  • Open Access

    Evaluation of Mid-Infrared and X-ray Fluorescence Data Fusion Approaches for Prediction of Soil Properties at the Field Scale

    by Isabel Greenberg, Michael Vohland, Michael Seidel, Christopher Hutengs, Rachel Bezard, Bernard Ludwig

    Previous studies investigating multi-sensor fusion for the collection of soil information have shown variable improvements, and the underlying prediction mechanisms are not sufficiently understood for spectrally-active and -inactive properties. Our objective was to study prediction mechanisms and benefits of model fusion by measuring mid-infrared (MIR) and X-ray fluorescence (XRF) spectra, texture, total and labile organic carbon (OC) and nitrogen (N) content, pH, and cation exchange capacity (CEC) for n = 117 soils from an arable field in Germany. Partial least squares regression models underwent a three-fold training/testing procedure using MIR spectra or elemental concentrations derived from XRF spectra. Additionally, two sequential hybrid and two high-level fusion approaches were tested. For the studied field, MIR was superior for organic properties (ratio of prediction to interquartile distance of validation (RPIQV) for total OC = 7.7 and N = 5.0)), while XRF was superior for inorganic properties (RPIQV for clay = 3.4, silt = 3.0, and sand = 1.8). Even the optimal fusion approach brought little to no accuracy improvement for these properties. The high XRF accuracy for clay and silt is explained by the large number of elements with variable importance in the projection scores >1 (Fe ≈ Ni > Si ≈ Al ≈ Mg > Mn ≈ K ≈ Pb (clay only) ≈ Cr) with strong spearman correlations (±0.57 < rs < ±0.90) with clay and silt. For spectrally-inactive properties relying on indirect prediction mechanisms, the relative improvements from the optimal fusion approach compared to the best single spectrometer were marginal for pH (3.2% increase in RPIQV versus MIR alone) but more pronounced for labile OC (9.3% versus MIR) and CEC (12% versus XRF). Dominance of a suboptimal spectrometer in a fusion approach worsened performance compared to the best single spectrometer. Granger-Ramanathan averaging, which weights predictions according to accuracy in training, is therefore recommended as a robust approach to capturing the potential benefits of multiple sensors.


  • Open Access

    Description and prediction of copper contents in soils using different modeling approaches—Results of long‐term monitoring of soils of northern Germany

    by Bernard Ludwig, Karen Klüver, Marek Filipinski, Isabel Greenberg, Hans‐Peter Piepho, Eckhard Cordsen

    Background: Different regression approaches may be useful to predict dynamics of copper (Cu), an essential element for plants and microorganisms that becomes toxic at increased contents, in soils.Aim: Our objective was to explore the usefulness of mixed‐effects modeling and rule‐based models for a description and prediction of Cu contents in aqua regia (CuAR) in surface soils using site, pH, soil organic carbon (SOC), and the cation exchange capacity (CEC) as predictors.Methods: Three sites in northern Germany were intensively monitored with respect to CuAR and SOC contents, pH, and CEC. Data analysis consisted of calibrations using the entire data set and of calibration/validation approaches with and without spiking.Results: There was no consistent temporal trend, so data could be combined for the subsequent regressions. Calibration using the entire data set and calibration/validation after random splitting (i.e., pseudo‐independent validation) were successful for mixed‐effects and cubist models, with Spearman's rank correlation coefficients rs ranging from 0.83 to 0.91 and low root mean squared errors (RMSEs). Both algorithms included SOC, CEC, and pH as essential predictors, whereas site was important only in the mixed‐effects models. Three‐fold partitioning of the data according to site to create independent validations was again successful for the respective calibrations, but validation results were variable, with rs ranging from 0.04 to 0.76 and generally high RMSEs. Spiking the calibration samples resulted in generally marked improvements of the validations, with rs ranging from 0.45 to 0.67 and lower RMSEs.Conclusions: Overall, the information provided by SOC, pH, and CEC is beneficial for predicting CuAR contents in a closed population of sites using either mixed‐effects or cubist models. However, for a prediction of CuAR dynamics at new sites in the region, spiking is required.


  • Open Access

    Application of mixed‐effects modelling and rule‐based models to explain copper variation in soil profiles of southern Germany

    by Bernard Ludwig, Petra Wölfel, Isabel Greenberg, Hans‐Peter Piepho, Peter Spörlein

    Copper (Cu) is an essential element for plants and microorganisms and at larger concentrations a toxic pollutant. A number of factors controlling Cu dynamics have been reported, but information on quantitative relationships is scarce. We aimed to (i) quantitatively describe and predict soil Cu concentrations (Cu AR ) in aqua regia considering site‐specific effects and effects of pH, soil organic carbon (SOC) and cation exchange capacity (CEC), and (ii) study the suitability of mixed‐effects modelling and rule‐based models for the analysis of long‐term soil monitoring data. Thirteen uncontaminated long‐term monitoring soil profiles in southern Germany were analysed. Since there was no measurable trend of increasing Cu AR concentrations with time in the respective depth ranges of the sites, data from different sampling dates were combined and horizon‐specific regression analyses including model simplifications were carried out for 10 horizons. Fixed‐ and mixed‐effects models with the site as a random effect were useful for the different horizons and significant contributions (either of main effects or interactions) of SOC, CEC and pH were present for 9, 8 and 7 horizons, respectively. Horizon‐specific rule‐based cubist models described the Cu AR data similarly well. Validations of cubist models and mixed‐effects models for the Cu AR concentrations in A horizons were successful for the given population after random splitting into calibration and validation samples, but not after independent validations with random splitting according to sites. Overall, site, CEC, SOC and pH provide important information for a description of Cu AR concentrations using the different regression approaches. Highlights: Information on quantitative relationships for factors controlling Cu dynamics is scarce Site, CEC, SOC and pH provide important information for a description of Cu concentrations Validations of cubist models and mixed‐effects models for A horizons were successful for a closed population of sites


  • Open Access

    Accuracy and Reproducibility of Laboratory Diffuse Reflectance Measurements with Portable VNIR and MIR Spectrometers for Predictive Soil Organic Carbon Modeling

    by Sebastian Semella, Christopher Hutengs, Michael Seidel, Mathias Ulrich, Birgit Schneider, Malte Ortner, Sören Thiele-Bruhn, Bernard Ludwig, Michael Vohland

    Soil spectroscopy in the visible-to-near infrared (VNIR) and mid-infrared (MIR) is a cost-effective method to determine the soil organic carbon content (SOC) based on predictive spectral models calibrated to analytical-determined SOC reference data. The degree to which uncertainty in reference data and spectral measurements contributes to the estimated accuracy of VNIR and MIR predictions, however, is rarely addressed and remains unclear, in particular for current handheld MIR spectrometers. We thus evaluated the reproducibility of both the spectral reflectance measurements with portable VNIR and MIR spectrometers and the analytical dry combustion SOC reference method, with the aim to assess how varying spectral inputs and reference values impact the calibration and validation of predictive VNIR and MIR models. Soil reflectance spectra and SOC were measured in triplicate, the latter by different laboratories, for a set of 75 finely ground soil samples covering a wide range of parent materials and SOC contents. Predictive partial least-squares regression (PLSR) models were evaluated in a repeated, nested cross-validation approach with systematically varied spectral inputs and reference data, respectively. We found that SOC predictions from both VNIR and MIR spectra were equally highly reproducible on average and similar to the dry combustion method, but MIR spectra were more robust to calibration sample variation. The contributions of spectral variation (ΔRMSE < 0.4 g·kg−1) and reference SOC uncertainty (ΔRMSE < 0.3 g·kg−1) to spectral modeling errors were small compared to the difference between the VNIR and MIR spectral ranges (ΔRMSE ~1.4 g·kg−1 in favor of MIR). For reference SOC, uncertainty was limited to the case of biased reference data appearing in either the calibration or validation. Given better predictive accuracy, comparable spectral reproducibility and greater robustness against calibration sample selection, the portable MIR spectrometer was considered overall superior to the VNIR instrument for SOC analysis. Our results further indicate that random errors in SOC reference values are effectively compensated for during model calibration, while biased SOC calibration data propagates errors into model predictions. Reference data uncertainty is thus more likely to negatively impact the estimated validation accuracy in soil spectroscopy studies where archived data, e.g., from soil spectral libraries, are used for model building, but it should be negligible otherwise.