Haibao Feng

Pile foundations are commonly used to support structures subjected to complex loading conditions. In seismic-prone regions, understanding the soil–pile interaction under cyclic loading is essential for ensuring the stability and safety of these foundations. Numerical modeling is an effective tool for predicting the nonlinear behavior of soil under seismic excitation, but selecting an appropriate constitutive model remains a significant challenge. This study investigates the seismic behavior of pile groups embedded in soft clay using advanced finite element analysis. The piles are modeled as aluminum with a linear elastic response and are analyzed within a soil domain characterized by two kinematic hardening constitutive models based on the Von Mises failure criterion. Model parameters are calibrated using a combination of experimental and numerical data. The study also examines the influence of pile spacing within the group on seismic response, revealing notable differences in the response patterns. The results show that the nonlinear kinematic hardening model provides a more accurate correlation with experimental centrifuge test results compared to the multilinear model. These findings contribute to enhancing the understanding of soil–pile interaction under seismic loading and improving the design of pile foundations.

Biochar has been recently investigated as an eco-friendly material in bio-engineered slopes/landfill covers. A majority of recent studies have focused on analyzing water retention behavior while very few have examined dynamic behavior (i.e., cyclic loading due to earthquake, wind, or wave) of biochar amended soil. As far as the authors are aware, there is no study on the dynamic behavior of biochar amended soils. Considering the above mentioned study as a major objective, field excavated soil was collected and mixed with in-house produced biochar from peach endocarps, at three amendment rates (5%, 10%, and 15%). The un-amended bare soil and biochar amended soil were imposed to a cyclic load in a self-designed apparatus and the corresponding stress-strain parameters were measured. Dynamic parameters such as shear modulus and damping ratio were computed and the results were compared between bare and biochar amended soil. Furthermore, the residual cyclic strength of each soil types were correlated with an estimated void ratio to understand the interrelation between dynamic loading responses and biochar amended soils. The major outcomes of this study show that the addition of biochar decreases the void ratio, thereby increasing the shear modulus and residual cyclic strength. However, the modulus and strength values attenuates after 15 cycles due to an increase in pore water pressure. In contrary, at higher amendment rates, Biochar Amended Soils (BAS) forms clay-carbon complex and decreases both shear modulus and residual cyclic strength.