Zeki Karaca
Zeki Karaca has a total of 24 co-authors. Here are the top co-authors by number of shared publications:
- Erdem Türkeli
Ordu Üniversitesi Teknik Bilimler Meslek Yüksekokulu İnşaat Teknolojisi Programı
6 shared publications - Olgun Köksal
Samsun Üniversitesi
4 shared publications A.H. Sofiyev
3 shared publications- Emre Alpaslan
Department of Civil Engineering, Ondokuz Mayıs University, Samsun, Turkey
2 shared publications Ondokuz Mayıs University
2 shared publications- Zihni Zerin
Department of Civil Engineering of Ondokuz Mayis University, Samsun, Turkey
2 shared publications
Latest Publications
- 16 December 2025
- Published by Black Sea Journal of Engineering and Science in Black Sea Journal of Engineering and Science
- No. Advanced O,p. 47-48
Analysis of Liquefaction Potential of Soils by Object Oriented Computer Software: 6th of February, 2023 Kahramanmaraş Earthquake Case
The soil under dynamic effects such as earthquakes causes great damage to the structure. One of the most important causes of damage caused by earthquakes is liquefaction. Liquefaction is defined as the temporary loss of strength of saturated, cohesionless soil deposits under temporary and cyclic loading due to excessive pore water pressure formation. On the 6th of February 2023 Kahramanmaraş, earthquakes and many others, many people lost their lives in structures damaged due to liquefaction. Turkey Building Earthquake Regulation (2018) explains what should be done about liquefaction. In this study, computer software that calculates the liquefaction potential according to the earthquake code is developed. The software is prepared using MATLAB programming language, which is an object-oriented language. This software calculates the liquefaction potential of soil layers according to possible earthquakes and Standard Penetration Test data. Consequently, it is understood that soils with liquefaction potential should be determined through using the software, and foundation design should be made by the soil conditions.
- 16 December 2025
- Published by Black Sea Journal of Engineering and Science in Black Sea Journal of Engineering and Science
- No. Advanced O,p. 47-48
Analysis of Liquefaction Potential of Soils by Object Oriented Computer Software: 6th of February, 2023 Kahramanmaraş Earthquake Case
The soil under dynamic effects such as earthquakes causes great damage to the structure. One of the most important causes of damage caused by earthquakes is liquefaction. Liquefaction is defined as the temporary loss of strength of saturated, cohesionless soil deposits under temporary and cyclic loading due to excessive pore water pressure formation. On the 6th of February 2023 Kahramanmaraş, earthquakes and many others, many people lost their lives in structures damaged due to liquefaction. Turkey Building Earthquake Regulation (2018) explains what should be done about liquefaction. In this study, computer software that calculates the liquefaction potential according to the earthquake code is developed. The software is prepared using MATLAB programming language, which is an object-oriented language. This software calculates the liquefaction potential of soil layers according to possible earthquakes and Standard Penetration Test data. Consequently, it is understood that soils with liquefaction potential should be determined through using the software, and foundation design should be made by the soil conditions.
- Open Access
- 30 June 2025
- Published by Ordu University in Ordu Üniversitesi Bilim ve Teknoloji Dergisi
- Vol. 15 (1) , 101-114
Dynamic Analysis of a Recessed Reinforced Concrete Rectangular Water Tank under Blast-Induced Ground Motion Effect
Construction, mining, oil, forestry, and agriculture all use blasting processes both in our country and in the world. A wide range of civil engineering projects, including homes, roads, railroads, dams, and airports, use blasting technology. The blasting process provides some advantages, but it also has drawbacks. Blasting has negative impacts, such as air shock and ground motion. This investigation concentrated solely on ground motion induced by an explosion. Utilizing the well-known MATLAB programming language, BlastGM software was implemented to obtain ground motion acceleration-time information. This software uses the maximum acceleration value and the ground motion acceleration time envelope curve to determine the acceleration-time changes of blasting-induced ground motions. Furthermore, this software uses the ground motion acceleration-time values to determine the shock's reaction spectrum. This study looked at how a recessed reinforced concrete (RC) rectangular water tank was affected by ground motion based on blasting. In Turkey, these tanks are built very frequently. For these tanks, the impact of ground motion brought on by blasting is crucial. ANSYS software produced the recessed RC rectangular water tank's three dimensional (3D) finite element model (FEM). Furthermore, the recessed RC rectangular water tank's maximum stresses and displacements were examined. The study's findings demonstrate that the recessed RC rectangular water tank is greatly impacted by blast-induced ground motion.
- 30 June 2025
- Published by Ordu University in Ordu Üniversitesi Bilim ve Teknoloji Dergisi
- Vol. 15 (1) , 101-114
Open AccessDynamic Analysis of a Recessed Reinforced Concrete Rectangular Water Tank under Blast-Induced Ground Motion Effect
Construction, mining, oil, forestry, and agriculture all use blasting processes both in our country and in the world. A wide range of civil engineering projects, including homes, roads, railroads, dams, and airports, use blasting technology. The blasting process provides some advantages, but it also has drawbacks. Blasting has negative impacts, such as air shock and ground motion. This investigation concentrated solely on ground motion induced by an explosion. Utilizing the well-known MATLAB programming language, BlastGM software was implemented to obtain ground motion acceleration-time information. This software uses the maximum acceleration value and the ground motion acceleration time envelope curve to determine the acceleration-time changes of blasting-induced ground motions. Furthermore, this software uses the ground motion acceleration-time values to determine the shock's reaction spectrum. This study looked at how a recessed reinforced concrete (RC) rectangular water tank was affected by ground motion based on blasting. In Turkey, these tanks are built very frequently. For these tanks, the impact of ground motion brought on by blasting is crucial. ANSYS software produced the recessed RC rectangular water tank's three dimensional (3D) finite element model (FEM). Furthermore, the recessed RC rectangular water tank's maximum stresses and displacements were examined. The study's findings demonstrate that the recessed RC rectangular water tank is greatly impacted by blast-induced ground motion.
- Open Access
Physicochemical Analysis of Historical Ordu Taşbaşı Church Mortars and Recommendations for Restoration
Throughout history, the architecture of worship structures has been shaped based on different cultures and belief systems during the Roman, Seljuk, Anatolian Principalities, and Ottoman periods. Additionally, it is understood that the sociocultural and ritual structure in which the worship place is built plays a significant role in church architecture. In province of Ordu, rich in historical and cultural heritage, historical structures outside the city center have not been well preserved. In recent years, neglected historical structures have been restored through various methods with public investments, aiming to reintegrate them into urban life. Through chemical and mineralogical (by microscopy) examinations aimed at determining the types of historical structural materials used for this purpose, the preservation of historical structures in Ordu province and their transfer to future generations is targeted. Church structures, holding a distinct significance in the region’s history, exhibit various characteristics in terms of location, climate, and sociocultural and ritual aspects in the Black Sea region. In this regard, the restoration of the historical Taşbaşı Church in the Altınordu district of Ordu province has been carried out considering scientific techniques and methods, serving as a guide for similar studies in the region in terms of laboratory analysis, studies, planning, project development, and implementation stages.
Open AccessPhysicochemical Analysis of Historical Ordu Taşbaşı Church Mortars and Recommendations for Restoration
Throughout history, the architecture of worship structures has been shaped based on different cultures and belief systems during the Roman, Seljuk, Anatolian Principalities, and Ottoman periods. Additionally, it is understood that the sociocultural and ritual structure in which the worship place is built plays a significant role in church architecture. In province of Ordu, rich in historical and cultural heritage, historical structures outside the city center have not been well preserved. In recent years, neglected historical structures have been restored through various methods with public investments, aiming to reintegrate them into urban life. Through chemical and mineralogical (by microscopy) examinations aimed at determining the types of historical structural materials used for this purpose, the preservation of historical structures in Ordu province and their transfer to future generations is targeted. Church structures, holding a distinct significance in the region’s history, exhibit various characteristics in terms of location, climate, and sociocultural and ritual aspects in the Black Sea region. In this regard, the restoration of the historical Taşbaşı Church in the Altınordu district of Ordu province has been carried out considering scientific techniques and methods, serving as a guide for similar studies in the region in terms of laboratory analysis, studies, planning, project development, and implementation stages.
- Open Access
- 15 July 2024
- Published by Periodica Polytechnica Budapest University of Technology and Economics in Periodica Polytechnica Civil Engineering
- Vol. 68 (4) , 1328-1349
The Effect of Nonlinear Sloshing Response of Water on Seismic Behavior of Reinforced Concrete Elevated Water Tanks
In this study, the fluid-structure interactive behavior by using the Westergaard approach and the Smoothed Particle Hydrodynamics (SPH) method of a 1000 m3 reinforced concrete (RC) elevated water tank under different seismic activities i.e., Kocaeli, Van, Kahramanmaraş and Kobe earthquakes was investigated. In the SPH method, the resulting hydrodynamic pressures were applied to the interior of the wall of the structure as an external force which is made as mass additions to the tank walls in Westergaard approach. With the help of software developed, the load carrying system of the elevated water tank was modeled using the MATLAB Partial Differential Equation Toolbox (PDE) software, based on the finite element method, and its verification was made by comparing with ANSYS software model. Dynamic condensation method was used to perform time history analyses for the cited earthquakes. The time-dependent solutions of partial differential equations are solved with the help of ODE45 functions based on Runge-Kutta method, by arranging the equation of motion in state-space format. The cited tank was analyzed linearly under different seismic activities for empty, half-filled (50%) and full-filled (100%) cases and the obtained results were compared with each other. It has been concluded that considering nonlinear behavior of the fluid during the earthquake with the SPH method provided consistency with the real behavior of RC elevated water tanks and gave more realistic results than the traditional Westergaard approach.
- 15 July 2024
- Published by Periodica Polytechnica Budapest University of Technology and Economics in Periodica Polytechnica Civil Engineering
- Vol. 68 (4) , 1328-1349
Open AccessThe Effect of Nonlinear Sloshing Response of Water on Seismic Behavior of Reinforced Concrete Elevated Water Tanks
In this study, the fluid-structure interactive behavior by using the Westergaard approach and the Smoothed Particle Hydrodynamics (SPH) method of a 1000 m3 reinforced concrete (RC) elevated water tank under different seismic activities i.e., Kocaeli, Van, Kahramanmaraş and Kobe earthquakes was investigated. In the SPH method, the resulting hydrodynamic pressures were applied to the interior of the wall of the structure as an external force which is made as mass additions to the tank walls in Westergaard approach. With the help of software developed, the load carrying system of the elevated water tank was modeled using the MATLAB Partial Differential Equation Toolbox (PDE) software, based on the finite element method, and its verification was made by comparing with ANSYS software model. Dynamic condensation method was used to perform time history analyses for the cited earthquakes. The time-dependent solutions of partial differential equations are solved with the help of ODE45 functions based on Runge-Kutta method, by arranging the equation of motion in state-space format. The cited tank was analyzed linearly under different seismic activities for empty, half-filled (50%) and full-filled (100%) cases and the obtained results were compared with each other. It has been concluded that considering nonlinear behavior of the fluid during the earthquake with the SPH method provided consistency with the real behavior of RC elevated water tanks and gave more realistic results than the traditional Westergaard approach.
- 30 June 2020
- Published by Golden Light Publishing in Journal of Structural Engineering & Applied Mechanics
- Vol. 3 (2) , 85-92
Influence of blast-induced ground motion on dynamic response of reinforcement retaining walls
- 30 June 2020
- Published by Golden Light Publishing in Journal of Structural Engineering & Applied Mechanics
- Vol. 3 (2) , 85-92
Influence of blast-induced ground motion on dynamic response of reinforcement retaining walls
- 31 March 2020
- Published by Golden Light Publishing in Journal of Structural Engineering & Applied Mechanics
- Vol. 3 (1) , 25-40
Response surface-based finite element model calibration of a one-span historical masonry bridge
- 31 March 2020
- Published by Golden Light Publishing in Journal of Structural Engineering & Applied Mechanics
- Vol. 3 (1) , 25-40
Response surface-based finite element model calibration of a one-span historical masonry bridge
- Open Access
- 25 March 2020
- Published by Tulpar Academic Publishing in Challenge Journal of Structural Mechanics
- Vol. 6 (1) , 41-51
Model updating of a reduced-scaled masonry bridge by using response surface method
Historical structures reflect the historical and cultural properties of countries and also contributes to the economy in terms of cultural tourism. Therefore, it is important to understand the structural behavior of these kinds of structures under dynamics loads such as earthquakes, etc. to protect and transfer them safely to future generations. For this reason, this study aims to investigate the dynamic behavior of a reduced-scale one-span masonry arch bridge constructed in laboratory conditions by performing experimental and numerical analysis. Operational Modal Analysis (OMA) Technique was performed under ambient vibrations for experimental study to determine modal parameters of the reduced-scaled bridge model. Sensitive three-axial accelerometers were located on critical points on the bridge span and signals originated by accelerometers were collected to quantify the vibratory response of the scale bridge model. The experimental natural frequencies, mode shapes and damping ratios resulting from these measurements were figured out by using Enhanced Frequency Domain Decomposition (EFDD) technique. ANSYS software was utilized to carry out 3D finite element (FE) modeling of the reduced-scale masonry bridge and determine the natural frequencies and mode shapes of the bridge numerically. Experimental results were compared with FE analysis results of the bridge. Significant differences appeared when comparing the results of the experimental and numerical with the initial conditions. Therefore, the finite element model is calibrated by using the response surface (RS) method according to the experimental results to minimize the uncertain finite element modeling parameters of the reduced-scale bridge model such as material properties.
- 25 March 2020
- Published by Tulpar Academic Publishing in Challenge Journal of Structural Mechanics
- Vol. 6 (1) , 41-51
Open AccessModel updating of a reduced-scaled masonry bridge by using response surface method
Historical structures reflect the historical and cultural properties of countries and also contributes to the economy in terms of cultural tourism. Therefore, it is important to understand the structural behavior of these kinds of structures under dynamics loads such as earthquakes, etc. to protect and transfer them safely to future generations. For this reason, this study aims to investigate the dynamic behavior of a reduced-scale one-span masonry arch bridge constructed in laboratory conditions by performing experimental and numerical analysis. Operational Modal Analysis (OMA) Technique was performed under ambient vibrations for experimental study to determine modal parameters of the reduced-scaled bridge model. Sensitive three-axial accelerometers were located on critical points on the bridge span and signals originated by accelerometers were collected to quantify the vibratory response of the scale bridge model. The experimental natural frequencies, mode shapes and damping ratios resulting from these measurements were figured out by using Enhanced Frequency Domain Decomposition (EFDD) technique. ANSYS software was utilized to carry out 3D finite element (FE) modeling of the reduced-scale masonry bridge and determine the natural frequencies and mode shapes of the bridge numerically. Experimental results were compared with FE analysis results of the bridge. Significant differences appeared when comparing the results of the experimental and numerical with the initial conditions. Therefore, the finite element model is calibrated by using the response surface (RS) method according to the experimental results to minimize the uncertain finite element modeling parameters of the reduced-scale bridge model such as material properties.
- 1 January 2017
- Published by Elsevier in Composite Structures
- Vol. 159, 53-62
Non-linear vibration of composite orthotropic cylindrical shells on the non-linear elastic foundations within the shear deformation theory
- 1 January 2017
- Published by Elsevier in Composite Structures
- Vol. 159, 53-62
Non-linear vibration of composite orthotropic cylindrical shells on the non-linear elastic foundations within the shear deformation theory
- 1 November 2016
- Published by Elsevier in Composites Part B: Engineering
- Vol. 104, 57-70
Winkler-Pasternak foundation effect on the frequency parameter of FGM truncated conical shells in the framework of shear deformation theory
- 1 November 2016
- Published by Elsevier in Composites Part B: Engineering
- Vol. 104, 57-70
Winkler-Pasternak foundation effect on the frequency parameter of FGM truncated conical shells in the framework of shear deformation theory
- 25 October 2014
- Published by Techno-Press in Steel and Composite Structures
- Vol. 17 (4) , 453-470
Stability of EG cylindrical shells with shear stresses on a Pasternak foundation
- 25 October 2014
- Published by Techno-Press in Steel and Composite Structures
- Vol. 17 (4) , 453-470
Stability of EG cylindrical shells with shear stresses on a Pasternak foundation