Noriko Yoshimoto
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Noriko Yoshimoto has a total of 39 co-authors. Here are the top co-authors by number of shared publications:
- Hiroshi Umakoshi
Division of Chemical Engineering, Graduate School of Engineering Science, Osaka University, 1-3 Machikaneyama-cho, Toyonaka, Osaka 560-8531, Japan
4 shared publications - Chyi-Shin Chen
Graduate School of Medicine, Biomedical Engineering Center (YUBEC), Yamaguchi University
3 shared publications - Ho-Sup Jung
Center for Food and Bioconvergence, Seoul National University, Seoul, Republic of Korea
3 shared publications Junghu Lee
Division of Chemical Engineering, Graduate School of Engineering Science, Osaka University, 1-3 Machikaneyama-cho, Toyonaka, Osaka 560-8531, Japan
3 shared publications- Makoto Yoshimoto
Department of Applied Chemistry, Yamaguchi University, Tokiwadai 2-16-1, Ube 755-8611, Japan
3 shared publications Seonghyeon Eom
Nbiocell Inc., Siheung SNU Start-up Campus
3 shared publications
Latest Publications
- 6 June 2026
- Published by American Chemical Society (ACS) in Nano Letters
A High-Throughput Screening Platform for Drug-Induced Physicochemical Perturbations in Multidimensional Model Liposomes
We developed a microfluidic high-throughput screening (HTS) platform for continuous, in situ physicochemical profiling of model lipid membranes, overcoming the limitations of traditional low-throughput methods. By integrating gradient mixing with in-line spectroscopy, the system enables dynamically programmable liposome synthesis across a broad landscape and simultaneous analysis of the membrane interfacial environment (GP340) and hydrophobic core fluidity (rDPH). We applied this platform to analyze model drug (bupivacaine hydrochloride)-induced perturbations in ternary model membranes. This approach generated 786 composition-resolved physicochemical data points within a single day, enabling high-density mapping of drug-induced membrane perturbations. Therefore, it enables lipid membrane analysis and high-resolution mapping and serves as a platform for composition-resolved analysis of physicochemical perturbations induced by membrane-active compounds.
- 6 June 2026
- Published by American Chemical Society (ACS) in Nano Letters
A High-Throughput Screening Platform for Drug-Induced Physicochemical Perturbations in Multidimensional Model Liposomes
We developed a microfluidic high-throughput screening (HTS) platform for continuous, in situ physicochemical profiling of model lipid membranes, overcoming the limitations of traditional low-throughput methods. By integrating gradient mixing with in-line spectroscopy, the system enables dynamically programmable liposome synthesis across a broad landscape and simultaneous analysis of the membrane interfacial environment (GP340) and hydrophobic core fluidity (rDPH). We applied this platform to analyze model drug (bupivacaine hydrochloride)-induced perturbations in ternary model membranes. This approach generated 786 composition-resolved physicochemical data points within a single day, enabling high-density mapping of drug-induced membrane perturbations. Therefore, it enables lipid membrane analysis and high-resolution mapping and serves as a platform for composition-resolved analysis of physicochemical perturbations induced by membrane-active compounds.
- Open Access
- 1 May 2026
- Published by Wiley in Small Methods
- Vol. 10 (12) , e70663
Liposome Particle Size Prediction by In‐Line Process Analytical Technology (PAT)‐Integrated Machine Learning
Precise control of liposome size is critical for drug delivery. We developed an in‐line PAT‐integrated machine learning model that predicts particle size with high accuracy (root mean square error 7.18 nm) using limited experimental data. By integrating physicochemical membrane characteristics, the model demonstrates generalization (root mean square error 7.53 nm) and interpretability, establishing a practical framework for advanced liposome particle size control.
- 1 May 2026
- Published by Wiley in Small Methods
- Vol. 10 (12) , e70663
Open AccessLiposome Particle Size Prediction by In‐Line Process Analytical Technology (PAT)‐Integrated Machine Learning
Precise control of liposome size is critical for drug delivery. We developed an in‐line PAT‐integrated machine learning model that predicts particle size with high accuracy (root mean square error 7.18 nm) using limited experimental data. By integrating physicochemical membrane characteristics, the model demonstrates generalization (root mean square error 7.53 nm) and interpretability, establishing a practical framework for advanced liposome particle size control.
- Open Access
- 26 January 2026
- Published by Wiley in Biotechnology Journal
- Vol. 21 (1) , e70183
Mechanistic Insights Into the Retention and Separation Mechanism of Poly(Ethylene Glycol)‐Modified Short Oligonucleotides in Anion‐Exchange Chromatography
Purification is a critical step in the development of synthetic short DNA for pharmaceutical applications. PEGylation enhances stability and pharmacokinetics but introduces steric and hydration effects that affect chromatographic behavior without altering the nominal DNA charge. This study investigated the retention and mass‐transfer behavior of thymine‐based poly(dT) oligomers (9–95 bases) modified with poly(ethylene glycol) (PEG) using anion‐exchange chromatography with a mechanistic ion‐exchange framework. By systematically varying PEG molecular weight and modification site, we examined how PEG‐induced changes in molecular size and local interaction environment are reflected in mechanistic retention parameters. PEGylation shifted elution to lower salt concentrations, with more pronounced effects observed for shorter oligomers and mid‐position modifications. Model‐based analysis revealed that the effective number of binding sites remained unchanged after PEG modification, indicating preserved charge‐based binding stoichiometry. In contrast, PEGylation reduced the ion‐exchange equilibrium constant, reflecting changes in the local interaction environment. HETP analysis showed that unmodified poly(dT) exhibited a strong retention‐dependent decrease in plate height, whereas this dependence was weaker for PEGylated DNA, suggesting that PEGylation modifies intraparticle mass‐transfer characteristics through combined steric hindrance and charge‐shielding effects. These results provide mechanistic insights into the chromatographic behavior of PEGylated oligonucleotides and a rational basis for optimizing their purification.
- 26 January 2026
- Published by Wiley in Biotechnology Journal
- Vol. 21 (1) , e70183
Open AccessMechanistic Insights Into the Retention and Separation Mechanism of Poly(Ethylene Glycol)‐Modified Short Oligonucleotides in Anion‐Exchange Chromatography
Purification is a critical step in the development of synthetic short DNA for pharmaceutical applications. PEGylation enhances stability and pharmacokinetics but introduces steric and hydration effects that affect chromatographic behavior without altering the nominal DNA charge. This study investigated the retention and mass‐transfer behavior of thymine‐based poly(dT) oligomers (9–95 bases) modified with poly(ethylene glycol) (PEG) using anion‐exchange chromatography with a mechanistic ion‐exchange framework. By systematically varying PEG molecular weight and modification site, we examined how PEG‐induced changes in molecular size and local interaction environment are reflected in mechanistic retention parameters. PEGylation shifted elution to lower salt concentrations, with more pronounced effects observed for shorter oligomers and mid‐position modifications. Model‐based analysis revealed that the effective number of binding sites remained unchanged after PEG modification, indicating preserved charge‐based binding stoichiometry. In contrast, PEGylation reduced the ion‐exchange equilibrium constant, reflecting changes in the local interaction environment. HETP analysis showed that unmodified poly(dT) exhibited a strong retention‐dependent decrease in plate height, whereas this dependence was weaker for PEGylated DNA, suggesting that PEGylation modifies intraparticle mass‐transfer characteristics through combined steric hindrance and charge‐shielding effects. These results provide mechanistic insights into the chromatographic behavior of PEGylated oligonucleotides and a rational basis for optimizing their purification.
- Open Access
- 22 August 2025
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 10 (35) , 40534-40543
Liposomes Carrying Surface-Conjugated Trypsin for Controlled Proteolysis Reactions
Control of the proteolytic activity of trypsin is an important challenge in proteomics and food engineering. In this work, trypsin was covalently conjugated to lipid membranes possessing poly(ethylene glycol) in a 0.1 M sodium phosphate buffer solution (pH = 7.0) to control the enzyme functions using a liposomal environment. The amount of trypsin conjugated per liposome membrane area was maximized based on the size of the polymer chain of liposomes and the type of cross-linker (glutaraldehyde or tris-succinimidyl aminotriacetate). The secondary structure of trypsin was altered through the conjugation reaction, as revealed with circular dichroism measurements and spectral analyses. Stability of trypsin at 40–60 °C significantly increased through being conjugated to liposomes, whereas free trypsin was clearly deactivated even at 40 °C in an enzyme concentration-dependent manner, indicating the involvement of autolysis mechanism. Liposome-conjugated trypsin was applied to catalyze the digestion of bovine serum albumin at 37 °C and a substrate/trypsin weight ratio of 100. The proteolysis rate observed with liposome-conjugated trypsin was smaller than that of the free enzyme, while the rate clearly depended on the characteristics of liposomes. The results obtained demonstrate that liposomes carrying surface-conjugated trypsin are biocompatible, heat stable, and reactivity-controllable catalysts for proteolysis reactions.
- 22 August 2025
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 10 (35) , 40534-40543
Open AccessLiposomes Carrying Surface-Conjugated Trypsin for Controlled Proteolysis Reactions
Control of the proteolytic activity of trypsin is an important challenge in proteomics and food engineering. In this work, trypsin was covalently conjugated to lipid membranes possessing poly(ethylene glycol) in a 0.1 M sodium phosphate buffer solution (pH = 7.0) to control the enzyme functions using a liposomal environment. The amount of trypsin conjugated per liposome membrane area was maximized based on the size of the polymer chain of liposomes and the type of cross-linker (glutaraldehyde or tris-succinimidyl aminotriacetate). The secondary structure of trypsin was altered through the conjugation reaction, as revealed with circular dichroism measurements and spectral analyses. Stability of trypsin at 40–60 °C significantly increased through being conjugated to liposomes, whereas free trypsin was clearly deactivated even at 40 °C in an enzyme concentration-dependent manner, indicating the involvement of autolysis mechanism. Liposome-conjugated trypsin was applied to catalyze the digestion of bovine serum albumin at 37 °C and a substrate/trypsin weight ratio of 100. The proteolysis rate observed with liposome-conjugated trypsin was smaller than that of the free enzyme, while the rate clearly depended on the characteristics of liposomes. The results obtained demonstrate that liposomes carrying surface-conjugated trypsin are biocompatible, heat stable, and reactivity-controllable catalysts for proteolysis reactions.
- 8 August 2025
- Published by American Chemical Society (ACS) in Langmuir
Engineering Liposomes in Microfluidic Mixing: The Critical Role of Lipid Membrane Properties in Formation and Precise Size Control
Microfluidic methods have gained attention for liposome preparation, as they enable the production of liposomes with monodispersed size distribution. Lipid membrane properties have been identified as critical parameters affecting particle size in microfluidic liposome preparation. Nevertheless, the correlation between membrane properties and particle size remains not fully understood. In this study, we investigate the relationship between the particle size and lipid membrane properties within a microfluidic environment. Four different ratios of 1,2-dioleoyl-sn-glycero-3-phosphocholine, cholesterol, and egg sphingomyelin were used for preparing different characteristics of liposomes. Lipid membrane properties, hydrophobicity, and rigidity were estimated using the fluorescence probes 6-dodecanoyl-N,N-dimethyl-2-naphthylamine (Laurdan) and 1,6-diphenyl-1,3,5-hexatriene (DPH). The effects of the lipid membrane properties were examined under different conditions, including total flow rate, flow rate ratio, and lipid concentration. By comparing a theoretical model, we discuss the liposome formation mechanism and its impact on the particle size. Our results highlight significant roles of membrane properties in liposome formation and particle size in microfluidic systems, offering insights for optimizing liposome preparation.
- 8 August 2025
- Published by American Chemical Society (ACS) in Langmuir
Engineering Liposomes in Microfluidic Mixing: The Critical Role of Lipid Membrane Properties in Formation and Precise Size Control
Microfluidic methods have gained attention for liposome preparation, as they enable the production of liposomes with monodispersed size distribution. Lipid membrane properties have been identified as critical parameters affecting particle size in microfluidic liposome preparation. Nevertheless, the correlation between membrane properties and particle size remains not fully understood. In this study, we investigate the relationship between the particle size and lipid membrane properties within a microfluidic environment. Four different ratios of 1,2-dioleoyl-sn-glycero-3-phosphocholine, cholesterol, and egg sphingomyelin were used for preparing different characteristics of liposomes. Lipid membrane properties, hydrophobicity, and rigidity were estimated using the fluorescence probes 6-dodecanoyl-N,N-dimethyl-2-naphthylamine (Laurdan) and 1,6-diphenyl-1,3,5-hexatriene (DPH). The effects of the lipid membrane properties were examined under different conditions, including total flow rate, flow rate ratio, and lipid concentration. By comparing a theoretical model, we discuss the liposome formation mechanism and its impact on the particle size. Our results highlight significant roles of membrane properties in liposome formation and particle size in microfluidic systems, offering insights for optimizing liposome preparation.
- Open Access
- 2 April 2025
- Published by American Chemical Society (ACS) in Biomacromolecules
- Vol. 26 (4) , 2131-2145
Preparation, Conformational Structure, and Proteolytic Activity of Papain Covalently Conjugated to Poly(ethylene glycol)-Tethered Lipid Bilayer Membranes
Conjugation of enzymes to lipid membranes is a key approach to reconstitute fascinating features of cell organelles and to deduce the nature of membrane-involved biological events. In this work, papain was covalently conjugated via a cross-linker to phospholipid vesicles (liposomes) tethered with poly(ethylene glycol) (PEG) at 25 °C and pH = 7.0, followed by chromatographic purification. The size of the PEG moiety and the type of cross-linker were optimized to obtain PEG-tethered liposome-conjugated papain (liposome-PEG-papain). Slight conformational changes of the membrane-conjugated papain in both its secondary and tertiary structures were revealed using circular dichroism and intrinsic fluorescence measurements. Notably, heat treatment of a liposome-PEG-papain dispersion at 77 or 84 °C caused permeabilization of the lipid membranes to 5(6)-carboxyfluorescein. Furthermore, liposome-PEG-papain exhibited the digestion activity of casein at 37 °C and pH = 7.6. The structural flexibility of liposomes as enzyme carriers may provide the opportunity to functionalize the membrane-conjugated biomacromolecules.
- 2 April 2025
- Published by American Chemical Society (ACS) in Biomacromolecules
- Vol. 26 (4) , 2131-2145
Open AccessPreparation, Conformational Structure, and Proteolytic Activity of Papain Covalently Conjugated to Poly(ethylene glycol)-Tethered Lipid Bilayer Membranes
Conjugation of enzymes to lipid membranes is a key approach to reconstitute fascinating features of cell organelles and to deduce the nature of membrane-involved biological events. In this work, papain was covalently conjugated via a cross-linker to phospholipid vesicles (liposomes) tethered with poly(ethylene glycol) (PEG) at 25 °C and pH = 7.0, followed by chromatographic purification. The size of the PEG moiety and the type of cross-linker were optimized to obtain PEG-tethered liposome-conjugated papain (liposome-PEG-papain). Slight conformational changes of the membrane-conjugated papain in both its secondary and tertiary structures were revealed using circular dichroism and intrinsic fluorescence measurements. Notably, heat treatment of a liposome-PEG-papain dispersion at 77 or 84 °C caused permeabilization of the lipid membranes to 5(6)-carboxyfluorescein. Furthermore, liposome-PEG-papain exhibited the digestion activity of casein at 37 °C and pH = 7.6. The structural flexibility of liposomes as enzyme carriers may provide the opportunity to functionalize the membrane-conjugated biomacromolecules.
- 22 January 2025
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 41 (4) , 2214-2223
Interaction Analysis between Cationic Lipid and Oligonucleotide with a Lipid Membrane-Immobilized Monolith Silica Column: A High-Performance Liquid Chromatography Approach
Understanding the interactions between lipid membranes and nucleotide drugs is crucial for nucleic acid therapy. Although several methods have been employed to evaluate nucleotide-lipid membrane interactions, these interactions can be complex; this complexity arises from how external factors, such as ionic strength or temperature, influence the lipid membrane's overall properties. In this study, we prepared a lipid membrane-immobilized monolithic silica (LMiMS) column for high-performance liquid chromatography (HPLC) analysis to understand interactions between the lipid membrane and nucleic acid. First, the Raman shift, zeta potential, fluidity, and polarity of the LMiMS-column membrane were analyzed and compared to dispersed liposomes (not immobilized) with the same lipid composition. The results indicated that the column can effectively imitate the temperature-dependent properties of the lipid membrane, suggesting that the immobilized lipid membrane can be used as a model of dispersed liposomal membranes. Subsequently, HPLC was performed to analyze the interaction between the lipid membrane and oligonucleotides. The retention factor k was determined as an interaction factor between the LMiMS column and nucleic acid models (poly 10, 25, and 50mer dC) at various temperatures and mobile phase salt concentrations. The results revealed that changes in membrane interaction were significant by the phase state and salt concentration. Further analysis of the retention factor k showed that the interaction is weak below the phase transition temperature but strong above the phase transition temperature. The results indicate that membrane properties (rigidity and polarity) are also related to membrane interaction, which can be evaluated with the LMiMS column. This analytical method can provide a new perspective on estimating the interactions between target molecules and the lipid membrane through their temperature-induced dynamics. From these results, our method could be useful for analyzing lipid membrane-oligonucleotide interactions.
- 22 January 2025
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 41 (4) , 2214-2223
Interaction Analysis between Cationic Lipid and Oligonucleotide with a Lipid Membrane-Immobilized Monolith Silica Column: A High-Performance Liquid Chromatography Approach
Understanding the interactions between lipid membranes and nucleotide drugs is crucial for nucleic acid therapy. Although several methods have been employed to evaluate nucleotide-lipid membrane interactions, these interactions can be complex; this complexity arises from how external factors, such as ionic strength or temperature, influence the lipid membrane's overall properties. In this study, we prepared a lipid membrane-immobilized monolithic silica (LMiMS) column for high-performance liquid chromatography (HPLC) analysis to understand interactions between the lipid membrane and nucleic acid. First, the Raman shift, zeta potential, fluidity, and polarity of the LMiMS-column membrane were analyzed and compared to dispersed liposomes (not immobilized) with the same lipid composition. The results indicated that the column can effectively imitate the temperature-dependent properties of the lipid membrane, suggesting that the immobilized lipid membrane can be used as a model of dispersed liposomal membranes. Subsequently, HPLC was performed to analyze the interaction between the lipid membrane and oligonucleotides. The retention factor k was determined as an interaction factor between the LMiMS column and nucleic acid models (poly 10, 25, and 50mer dC) at various temperatures and mobile phase salt concentrations. The results revealed that changes in membrane interaction were significant by the phase state and salt concentration. Further analysis of the retention factor k showed that the interaction is weak below the phase transition temperature but strong above the phase transition temperature. The results indicate that membrane properties (rigidity and polarity) are also related to membrane interaction, which can be evaluated with the LMiMS column. This analytical method can provide a new perspective on estimating the interactions between target molecules and the lipid membrane through their temperature-induced dynamics. From these results, our method could be useful for analyzing lipid membrane-oligonucleotide interactions.
- 16 July 2024
- Published by American Chemical Society (ACS) in ACS Applied Bio Materials
- Vol. 7 (8) , 5566-5578
Liposome–Papain Conjugates for Catalytic Digestion of Antibody Producing Fab Fragments
Papain is useful for the enzymatic digestion of various proteins to produce functional peptides or protein fragments. Immobilized papain being reactive toward proteins and easily removable from a reaction mixture is worth developed. In the present work, liposomes were applied as colloidal carriers of papain for the catalytic digestion of polyclonal immunoglobulin G (IgG). Papain was covalently conjugated at pH = 7.0 via tris-succinimidyl aminotriacetate (TSAT) to liposomes incorporated with 5 mol % poly(ethylene glycol)-tethered lipid with a reactive amino group. The papain-conjugated liposome (liposome-papain) catalyzed the hydrolysis of Nα-benzoyl-l-arginine 4-nitroanilide hydrochloride (BAPNA) at pH = 5.0-7.0. The activity of liposome-papain significantly increased with increasing temperature from 25 to 50 °C. The Michaelis constant Km was determined with respect to the liposome-papain- and free papain-catalyzed reactions with BAPNA at 37 °C as Km = 1.11 ± 0.13 and 11.6 ± 2.9 mM, respectively. Liposome-papain was applied to the catalytic digestion of 10 mg·mL-1 IgG at 37 °C for 24 h at pH = 5.0-7.0. The reaction mixture could be analyzed without pretreatment by using the affinity columns immobilized with the protein A or protein L ligand because colloidal liposome-papain quickly flowed through the chromatographic stationary phase, exhibiting little proteolytic effect on the proteinaceous ligands. The analysis clearly demonstrated the catalytic production of antigen-binding fragments (Fab) from IgG in an enzyme concentration- and pH-dependent manner. Liposome-papain with 15 or 50 mol % anionic lipids also catalyzed the formation of Fab from IgG. The above results demonstrated that liposome-papain was useful to digest IgG and to purify Fab formed with the affinity chromatography.
- 16 July 2024
- Published by American Chemical Society (ACS) in ACS Applied Bio Materials
- Vol. 7 (8) , 5566-5578
Liposome–Papain Conjugates for Catalytic Digestion of Antibody Producing Fab Fragments
Papain is useful for the enzymatic digestion of various proteins to produce functional peptides or protein fragments. Immobilized papain being reactive toward proteins and easily removable from a reaction mixture is worth developed. In the present work, liposomes were applied as colloidal carriers of papain for the catalytic digestion of polyclonal immunoglobulin G (IgG). Papain was covalently conjugated at pH = 7.0 via tris-succinimidyl aminotriacetate (TSAT) to liposomes incorporated with 5 mol % poly(ethylene glycol)-tethered lipid with a reactive amino group. The papain-conjugated liposome (liposome-papain) catalyzed the hydrolysis of Nα-benzoyl-l-arginine 4-nitroanilide hydrochloride (BAPNA) at pH = 5.0-7.0. The activity of liposome-papain significantly increased with increasing temperature from 25 to 50 °C. The Michaelis constant Km was determined with respect to the liposome-papain- and free papain-catalyzed reactions with BAPNA at 37 °C as Km = 1.11 ± 0.13 and 11.6 ± 2.9 mM, respectively. Liposome-papain was applied to the catalytic digestion of 10 mg·mL-1 IgG at 37 °C for 24 h at pH = 5.0-7.0. The reaction mixture could be analyzed without pretreatment by using the affinity columns immobilized with the protein A or protein L ligand because colloidal liposome-papain quickly flowed through the chromatographic stationary phase, exhibiting little proteolytic effect on the proteinaceous ligands. The analysis clearly demonstrated the catalytic production of antigen-binding fragments (Fab) from IgG in an enzyme concentration- and pH-dependent manner. Liposome-papain with 15 or 50 mol % anionic lipids also catalyzed the formation of Fab from IgG. The above results demonstrated that liposome-papain was useful to digest IgG and to purify Fab formed with the affinity chromatography.
- Open Access
- 15 March 2022
- Published by Japan Society for Food Engineering in Japan Journal of Food Engineering
- Vol. 23 (1) , 1-12
Continuous Protein Modification and Separation Process with Chromatography
タンパク質のPEG化は安定性を向上することが知られているが,反応制御は難しく,複数の修飾異性体が生成する.これらの修飾体の分離には,イオン交換クロマトグラフィー(IEC)が用いられる.タンパク質に対して構築されたIECの分離機構モデルをPEG化タンパク質に適用することができれば,分離条件を合理的に決定可能となる.このためmono-PEG修飾体としてPEG化BSAを,random-PEG修飾体としてPEG化lysozymeを用い,それらの溶出時の塩濃度勾配と溶出塩濃度を,機構モデルを用いて解析した.いずれのPEG修飾体においてもモデルの適用が可能であり,担体上の結合部位の数は未修飾のものとほぼ同じ値をとることがわかった.また,機構モデルから算出される分配係数に基づき,移動相塩濃度を設定すると,PEG化と同時にカラムから反応生成物を脱離させることや,リサイクル型の連続反応分離操作も可能であった.
- 15 March 2022
- Published by Japan Society for Food Engineering in Japan Journal of Food Engineering
- Vol. 23 (1) , 1-12
Open AccessContinuous Protein Modification and Separation Process with Chromatography
タンパク質のPEG化は安定性を向上することが知られているが,反応制御は難しく,複数の修飾異性体が生成する.これらの修飾体の分離には,イオン交換クロマトグラフィー(IEC)が用いられる.タンパク質に対して構築されたIECの分離機構モデルをPEG化タンパク質に適用することができれば,分離条件を合理的に決定可能となる.このためmono-PEG修飾体としてPEG化BSAを,random-PEG修飾体としてPEG化lysozymeを用い,それらの溶出時の塩濃度勾配と溶出塩濃度を,機構モデルを用いて解析した.いずれのPEG修飾体においてもモデルの適用が可能であり,担体上の結合部位の数は未修飾のものとほぼ同じ値をとることがわかった.また,機構モデルから算出される分配係数に基づき,移動相塩濃度を設定すると,PEG化と同時にカラムから反応生成物を脱離させることや,リサイクル型の連続反応分離操作も可能であった.
- 1 September 2021
- Published by Elsevier in Colloids and Surfaces B: Biointerfaces
- Vol. 205, 111853
Correlation between protein desorption behavior and its adsorption enthalpy change in polymer grafted anion exchange chromatography
- 1 September 2021
- Published by Elsevier in Colloids and Surfaces B: Biointerfaces
- Vol. 205, 111853
Correlation between protein desorption behavior and its adsorption enthalpy change in polymer grafted anion exchange chromatography