DWDennis D. Weller

Dennis D. Weller

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Dennis D. Weller has a total of 16 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Efficient Analog Error Correction for Printed Unary-Encoded Computing

    by Priyanjana Pal, Brojogopal Sapui, Dennis D. Weller, Mehdi B. Tahoori

    Printed electronics (PE) is an emerging additive manufacturing technology, enabling flexible and extremely low-cost computing devices for future pervasive computing systems. Given the form factor and limited device count in this technology, unary encoding (UE), which encodes values as a sequence of bits (1’s or 0’s) by utilizing the proportion of 1’s in the sequence to represent the corresponding probability, shows great promise for printed technologies targeting resource-constrained applications. However, while UE offers some resilience to noise and variability, explicit error correction is still required to address intrinsic defects and variations in printing technologies to deliver reliable and stable outputs. In this work, we propose an area-efficient analog error correction (AEC) method using UE techniques to deal with sporadic bit errors and environmental noise at runtime. This approach significantly reduces transistor count and area utilization compared to conventional error correction coding (ECC) implementations. For proof of concept, we have shown the applicability of this approach for printed physical unclonable functions (p-PUFs) which have significantly lower reliability than silicon-based counterparts. Moreover, the robustness of the proposed scheme against temperature and voltage fluctuations has also been reported. By applying AEC to the p-PUFs output bitstream, its reliability can be fully restored (statistically 100%) for up to 20% bit error rate.


  • Open Access

    Artificial Neurons on Flexible Substrates: A Fully Printed Approach for Neuromorphic Sensing

    by Surya A. Singaraju, Dennis D. Weller, Thurid S. Gspann, Jasmin Aghassi-Hagmann, Mehdi B. Tahoori

    Printed electronic devices have demonstrated their applicability in complex electronic circuits. There is recent progress in the realization of neuromorphic computing systems (NCSs) to implement basic synaptic functions using solution-processed materials. However, a fully printed neuron is yet to be realised. We demonstrate a fully printed artificial neuromorphic circuit on flexible polyimide (PI) substrate. Characteristic features of individual components of the printed system were guided by the software training of the NCS. The printing process employs graphene ink for passive structures and In2O3 as active material to print a two-input artificial neuron on PI. To ensure a small area footprint, the thickness of graphene film is tuned to target a resistance and to obtain conductors or resistors. The sheet resistance of the graphene film annealed at 300 °C can be adjusted between 200 Ω and 500 kΩ depending on the number of printed layers. The fully printed devices withstand a minimum of 2% tensile strain for at least 200 cycles of applied stress without any crack formation. The area usage of the printed two-input neuron is 16.25 mm2, with a power consumption of 37.7 mW, a propagation delay of 1 s, and a voltage supply of 2 V, which renders the device a promising candidate for future applications in smart wearable sensors.


  • Fast and Efficient High-Sigma Yield Analysis and Optimization Using Kernel Density Estimation on a Bayesian Optimized Failure Rate Model

    by Dennis D. Weller, Michael Hefenbrock, Michael Beigl, Mehdi B. Tahoori

    With ever-increasing transistor density in nanoscale-integrated circuits, the impact of process variations on circuit performance and chip yield becomes dominant. To prevent failures in the field, simulation-based circuit optimization tools are performed during design time as a countermeasure. However, the efficiency of these tools requires accurate modeling of failure probabilities. Especially, for high-sigma problems such as yield estimation of memory cells, which require very high production yield, the failure rate assessment must be highly accurate. Importance sampling (IS) methods are deployed in this context to uncover very rare failure events, which cannot be revealed by standard Monte Carlo methods. Besides a highly accurate yield prediction model, the limited time budget of the simulation-based analysis tools has to be taken into account. Especially in conjunction with yield optimization techniques, the required number of circuit simulations for the failure rate estimation has to be substantially reduced. In this article, we propose a yield optimization method, which is based on a Bayesian optimization (BO) failure rate estimation technique for high-sigma yield extraction. The BO-based IS method is combined with a kernel density estimator for finding the most probable failure events, which have significant contribution to the chip yield. By integration into a global optimization framework, we show how the proposed yield optimization method can be applied to high-sigma yield optimization problems, such as memory cells. The experimental results indicate that the proposed method consumes only 5% circuit simulations to achieve the same optimization effect as the state-of-the-art yield optimizer techniques.


  • A Printed Camouflaged Cell Against Reverse Engineering of Printed Electronics Circuits

    by Ahmet Turan Erozan, Dennis D. Weller, Yijing Feng, Gabriel Cadilha Marques, Jasmin Aghassi-Hagmann, Mehdi B. Tahoori

    Printed electronics (PE) enables disruptive applications in wearables, smart sensors, and healthcare since it provides mechanical flexibility, low cost, and on-demand fabrication. The progress in PE raises trust issues in the supply chain and vulnerability to reverse engineering (RE) attacks. Recently, RE attacks on PE circuits have been successfully performed, pointing out the need for countermeasures against RE, such as camouflaging. In this article, we propose a printed camouflaged logic cell that can be inserted into PE circuits to thwart RE. The proposed cell is based on three components achieved by changing the fabrication process that exploits the additive manufacturing feature of PE. These components are optically look-alike, while their electrical behaviors are different, functioning as a transistor, short, and open. The properties of the proposed cell and standard PE cells are compared in terms of voltage swing, delay, power consumption, and area. Moreover, the proposed camouflaged cell is fabricated and characterized to prove its functionality. Furthermore, numerous camouflaged components are fabricated, and their (in)distinguishability is assessed to validate their optical similarities based on the recent RE attacks on PE. The results show that the proposed cell is a promising candidate to be utilized in camouflaging PE circuits with negligible overhead.


  • A Novel Printed-Lookup-Table-Based Programmable Printed Digital Circuit

    by Ahmet Turan Erozan, Dennis D. Weller, Farhan Rasheed, Rajendra Bishnoi, Jasmin Aghassi-Hagmann, Mehdi B. Tahoori

    Advances in printed electronics (PE) enables new applications, particularly in ultra-low-cost domains. However, achieving high-throughput printing processes and manufacturing yield is one of the major challenges in the large-scale integration of PE technology. In this article, we present a programmable printed circuit based on an efficient printed lookup table (pLUT) to address these challenges by combining the advantages of the high-throughput advanced printing and maskless point-of-use final configuration printing. We propose a novel pLUT design which is more efficient in PE realization compared to existing LUT designs. The proposed pLUT design is simulated, fabricated, and programmed as different logic functions with inkjet printed conductive ink to prove that it can realize digital circuit functionality with the use of programmability features. The measurements show that the fabricated LUT design is operable at 1 V.


  • Bayesian Optimized Mixture Importance Sampling for High-Sigma Failure Rate Estimation

    by Dennis D. Weller, Michael Hefenbrock, Mohammad S. Golanbari, Michael Beigl, Jasmin Aghassi-Hagmann, Mehdi B. Tahoori

    In many application domains, in particular automotives, guaranteeing a very low failure rate is crucial to meet functional and safety standards. Especially, reliable operation of memory components such as SRAM cells is of essential importance. Due to aggressive technology downscaling, process and runtime variations significantly impact manufacturing yield as well as functionality. For this reason, a thorough memory failure rate assessment is imperative for correct circuit operation and yield improvement. In this regard, Monte Carlo simulations have been used as the conventional method to estimate the variability induced failure rate of memory components. However, Monte Carlo methods become infeasible when estimating rare events such as high-sigma failure rates. To this end, Importance Sampling methods have been proposed which reduce the number of required simulations substantially. However, existing methods still suffer from inaccuracies and high computational efforts, in particular for high-sigma problems. In this paper, we fill this gap by presenting an efficient mixture Importance Sampling approach based on Bayesian optimization, which deploys a surface model of the objective function to find the most probable failure points. Its advantages include constant complexity independent of the dimensions of design space, the potential to find the global extrema, and higher trustworthiness of the estimated failure rate by accurately exploring the design space. The approach is evaluated on a 6T-SRAM cell as well as a master-slave latch based on a 28nm FDSOI process. The results show an improvement in accuracy, resulting in up to 63× better accuracy in estimating failure rates compared to the best state-of-the-art solutions on a 28nm technology node.


  • An Inkjet-Printed Low-Voltage Latch Based on Inorganic Electrolyte-Gated Transistors

    by Dennis Weller, Gabriel Cadilha Marques, Jasmin Aghassi-Hagmann, Mehdi B. Tahoori

    Printed electronics is a fast-growing emerging technology, which is expected to play a major role in smart sensors for the Internet of Things domain. While there has been considerable progress at the device level by new materials, on circuit level results are still rare. In this letter, we report on the design, simulation, fabrication, and measurement of an inkjet-printedlatch, which is an essential building block for digital circuits. Our technology approach is based on electrolyte-gated transistors, which enables low-voltage operation and yields an outstanding electrical performance due to high mobility of the semiconducting, precursor-made In 2 O 3 channel. The fabricated latch can operate reliably down to 0.6V, where the power consumption is only 16 μW. The area requirement is about 7 mm 2 , and in terms of lifetime, no performance degradation was observed during an experimental period of 12 weeks.