S. L. Lysikova has a total of 13 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Validation of an in vitro biological method for filgrastim potency assessment

    by L. A. Gaiderova, M. L. Baykova, O. V. Golovinskaya, S. L. Lysikova, V. V. Fomenko, N. A. Alpatova

    INTRODUCTION. Filgrastim is a human granulocyte colony-stimulating factor produced using recombinant DNA technology. Since filgrastim quality control necessitates a validated method, establishing the entire method validation parameters is of high priority; confirming the previously established parameters gains primary importance when substituting critical reagents/ materials/parameters. AIM. This study aimed to select and confirm a number of validation parameters for in vitro biological method that would assess filgrastim potency using NFS-60 cell line. MATERIALS AND METHODS. Filgrastim potency was assessed by fluorescence intensity of alamarBlue™ reagent at excitation wavelengths of 530 nm and emission of 620 nm directly proportional to proliferation level of NFS-60 cells exposed to filgrastim 0.1 to 208 IU/mL. Statistical analysis of the results was performed using the 4-parameter logistic function 4PL and the parallel line analysis in PLA 2.0.0 software. RESULTS. The method was deemed precise: the coefficient of variation (CV) in the repeatability study was 6.20%, and the intermediate precision study showed CV 1.19% (acceptance criterion CV≤25%). The method was linear; the coefficient of determination for the linear function was R 2=0.99 (acceptance criterion R 2≥0.95). The degree of recovery was 101.6% and did not exceed ±10% of the expected value. The method was robust to an increased density of the cell suspension from 1.5×105 to 3.0×105 cells/mL (CV=0.07%) and to prolonged incubation of filgrastim samples with the cell suspension (from 48 to 72 h, CV=4.2%) or with fluorescent dye (from 4 to 6 h, CV=2.05%). CONCLUSIONS. The in vitro method assessing specific potency of filgrastim-based preparations using NFS-60 cell line is linear, precise, and accurate, and has proven to be stable under controlled changes of certain parameters. Confirmed applicability of NFS-60 cell line for assessing the potency of filgrastim-based preparations is essential for manufacturers, since it expands the range of cell cultures used for quality assessment of preparations.

  • Open Access

    Expert Assessment of In Vitro Potency Assays for Monoclonal Antibody Preparations

    by N. A. Alpatova, O. V. Golovinskaya, M. L. Baykova, S. L. Lysikova, L. A. Gaiderova

    INTRODUCTION. The quality control of biotechnological medicinal products requires a range of biological assay procedures. The development of bioassays for potency determination is a complex process that should comply with the requirements set forth in regulatory standards. For adequate reproducibility, bioassays should be properly described in draft product specification files.AIM. This study aimed to summarise the recommendations for developing in vitro bioassays for potency determination of monoclonal antibody preparations and for describing these bioassays in product specification files.DISCUSSION. This article describes the Fab- and Fc-associated biological activi­ty mechanisms of monospecific and bispecific monoclonal antibodies. The article covers in vivo and in vitro methods used to study these mechanisms, with emphasis on the reporter gene assay. The article formulates the concept and analyses the components of a holistic analytical system that is necessary for bioassay development. A well-designed analytical procedure can minimise the influence of critical factors on the test results and reduce the risks of both random and systematic errors. This article presents an estimation of the significance of detailed description of critical procedure parameters in the draft product specification file for a monoclonal antibody.CONCLUSIONS. A bioassay for the determination of potency should reflect the mecha­nism of action of the medicinal product and should provide the lowest possible variability and the highest possible ease of use. An adequate analytical procedure with appropriate analytical conditions can reduce the risk of obtaining invalid quality control results.

  • Open Access

    Potency evaluation of erythropoietin products: current status

    by L. A. Gaiderova, N. A. Alpatova, S. L. Lysikova, А. М. Гуськов, O. V. Golovinskaya

    INTRODUCTION. Given the widespread clinical use of recombinant human erythropoietin (rhEPO) products from different manufacturers, potency assays should ensure that patients receive comparable doses of rhEPO across medicinal products. The harmonisation of approaches to potency testing requires the use of pharmacopoeial bioassays and appropriate international/pharmacopoeial reference standards (RSs).AIM. This study aimed to summarise information on pharmacopoeial requirements, relevant RSs, and bioassays (in vivo and in vitro) for the assessment of rhEPO potency, as well as to analyse the pharmacopoeial compliance of manufacturers’ specifications for rhEPO products authorised in Russia.DISCUSSION. This article presents information on the molecular structure of erythropoietin. The glycosylation profile of erythropoietin not only accounts for most of the differences in the half-life and biodegradation rate but also significantly influences the potency of rhEPO products. The authors outlined the pharmacopoeial requirements for potency assays in vivo, summarised the information on RSs for potency determination, characterised the development of potency assays in vitro, and studied the possibility of including in vitro assays in pharmacopoeias. The analysis showed that some potency assays used for rhEPO products manufactured in Russia did not comply with the requirements of the State Pharmacopoeia of the Russian Federation.CONCLUSIONS. The study identified the need to develop and certify a national pharmacopoeial RS for the potency of rhEPO in order to satisfy the demands of Russian manufacturers in the context of import substitution. To implement adequate 3R-compliant methods for rhEPO quality assessment, it is necessary to harmonise approaches to potency testing of rhEPO products and develop a consolidated document governing such testing.

  • Open Access

    International standards for monoclonal antibodies for assessing the biological activity of medicines: A status update

    by L. A. Gayderova, N. A. Alpatova, S. L. Lysikova, M. L. Baykova, А. М. Гуськов, D. A. Zubkov

    Scientific relevance. The clinical effects and the expiration of patents for original (reference) biotechnological medicines based on monoclonal antibodies (mAbs) stimulated the development of biosimilar mAbs. The quality profile of a biosimilar mAb should correspond to the quality of the reference medicinal product. When demonstrating biosimilarity and determining the activity of medicines as part of batch quality control, analysts should study the biological properties of mAbs using suitable reference standards. The lack of international standards (ISs) makes mAb manufacturers use in-house reference standards. There is a risk of obtaining non-uniform quality and efficacy data because of the use of in-house reference standards, the heterogeneity and structural complexity of mAbs, and the relationship between the biological activity and efficacy of mAbs.Aim. This study aimed to analyse the relevance of and need for ISs for the biological activity of biotherapeutic mAbs and to define the role of reference medicinal products and ISs in assessing biosimilarity and testing medicines throughout their lifecycle.Discussion. This review covers the issues arising from the lack of ISs for assessing the biological activity of mAbs and the role and significance of reference products and ISs for biosimilars. The authors describe the specifics of studying the biological properties of mAbs and summarise the data on the need to develop and use ISs for the standardisation of biological tests. This review presents the results of studies on the first ISs established by the World Health Organisation to assess the biological activity of mAbs; these results suggest the need to standardise mAbs using ISs to ensure the quality, safety, and efficacy of mAb therapy.Conclusions. The use of ISs for mAbs plays a key role in harmonising biological activity assessments. Publicly available ISs serve as primary standards for the calibration of secondary reference materials. Moreover, ISs are required for the harmonisation of activity evaluation (in IU) between laboratories and for the consistency of the activity of various medicinal products from different manufacturers that share the same INN. The use of ISs by mAb manufacturers will contribute to ensuring the quality of mAbs and clinical monitoring of the effectiveness of their use.


  • Open Access

    General characteristics of adjuvants and their mechanisms of action (part 2)

    by N. А. Alpatova, Zh. I. Avdeeva, S. L. Lysikova, O. V. Golovinskaya, L. A. Gayderova, V. P. Bondarev

    One of the major public health challenges today is development of new vaccines and technologies to optimize the vaccination process. There is a growing scientific interest in vaccine adjuvants that enhance vaccine immunogenicity. At present, numerous studies are underway to develop COVID-19 vaccines, including inactivated and subunit vaccines which contain adjuvants for efficient induction of immune response and solid immunity. The aim of the study was to systematise literature related to the analysis of the structure, mechanisms of action and stimulating properties of vaccine adjuvants (synthetic oligodeoxynucleotides, virosomes, polyoxidonium, sovidone), as well as to summarise data on the effects of adjuvants used in SARS-CoV, MERS-CoV, and SARS-CoV-2 vaccine development studies. The paper analyses the prospects for enhancing the stimulating effect of the adjuvants when used in combination with compounds having a different mechanism of action. It also analyses the results of studies of adjuvanted vaccines against SARS-CoV and MERS-CoV, which may be useful when selecting adjuvants with optimal efficacy and safety profiles to be used in SARS-CoV-2 vaccines under development. It was concluded that understanding of the mechanisms of action of adjuvants that mediate their stimulating effect on the body’s immune system will contribute to safe and effective use of adjuvants to enhance the immunogenicity of both authorised and new vaccines.


  • Analysis of the mechanisms of development of the immune response in hepatitis B virus infection and ways to improve the effectiveness of vaccination

    by Zh.I. Avdeeva, N.A. Alpatova, S.L. Lysikova, L.A. Gayderova, V.P. Bondarev

    Анализ механизмов развития иммунного ответа при инфицировании вирусом гепатита В и способы повышения эффективности вакцинации


  • Open Access

    General Characteristics of Adjuvants and Their Mechanism of Action (Part 1)

    by N. A. Alpatova, Zh. I. Avdeeva, S. L. Lysikova, O. V. Golovinskaya, L. A. Gayderova

    One of priority issues of the present-day healthcare system is development of new vaccines and improvement of existing ones due to decreasing immunocompetence of the population, emergence of new infections and reemergence of old ones which were previously thought to be under control. Adjuvants have proven to be integral and important components of modern vaccines, as they enhance immune response to the vaccine antigen. However, despite a lot of effort put into their development, only a small number of adjuvants are currently used in clinical practice.The aim of the study was to systematise literature data on the adjuvants’ mechanisms of action, their specific structure, composition, and stimulation effects that mediate their immunoadjuvant properties. The paper summarises data on adjuvants used as components in licensed vaccines, describes their characteristics, analyses molecular mechanisms of their action in order to establish correlation between their structure and activity, which is important for the development of more efficacious and safe adjuvants. The paper cites advanced developments aimed at enhancing stimulation effects of existing adjuvants. It concludes by stating that the key research area aimed at improving vaccination efficacy is the study of mechanisms that contribute to the development of effective protection against infectious agents, as well as analysis of how to use adjuvants to stimulate the body’s defensive mechanisms, primarily by impacting the innate immunity.


  • Open Access

    Immune Response Induced by Immunisation with Antiviral Vaccines

    by N. A. Alpatova, Zh. I. Avdeeva, L. A. Gayderova, S. L. Lysikova, N. V. Medunitsyn

    The review is devoted to specific aspects of the development of post-vaccination immunity following immunisation with different types of antiviral vaccines, as well as to ways of increasing immunogenicity of vaccines and effectiveness of preventive vaccination. Vaccines containing highly purified and recombinant antigens obtained using modern technologies have lower reactogenicity and a higher safety profile, but are less immunogenic compared to live vaccines. Effective vaccines have not been developed for many viral infections yet. Therefore, it is critical to search for ways to enhance immunogenic properties of vaccines in order to increase the efficiency of vaccination, and to develop new vaccine formulations that provide reliable protection of the body against infection. The aim of the paper was to analyse specific aspects of immune response development following immunisation with antiviral vaccines, and approaches to increasing their immunogenicity using adjuvants. It reviews different types of antiviral vaccines, as well as specific aspects of immune response development depending on the nature of a specific antigen. The paper substantiates the use of adjuvants to enhance and regulate the induced immune response. It analyses mechanisms that determine the stimulating effect of adjuvants and summarises data on the adjuvants used in the licensed vaccines for human use. The authors highlight the need for further research to increase the efficiency of vaccination and suggest that one of potential solutions is the use of adjuvants based on recombinant human cytokines.


  • Open Access

    Recommendations for Expounding Evaluation of Biological (Specific) Activity of Biotechnological Products in Product Specification Files

    by O. V. Golovinskaya, S. L. Lysikova, Yu. N. Lebedeva, N. A. Alpatova, A. A. Movsesyants, V. A. Merkulov

    Biotechnological products, like all other medicinal products, have to comply with efficacy, safety and quality requirements. Quality evaluation of medicines includes assessment of test methods used to control medicinal product quality (described in product specification files provided by the manufacturer), laboratory testing of samples using these methods, as well as assessment of the registration dossier materials, including materials on test method validation included into the product specification files. One of the most important quality parameters of biotechnological products is biological activity, i.e. specific ability of a product to induce a desired biological effect. The article presents the results of a detailed analysis of methods used for determination of biological (specific) activity that are described in product specification files of various biotechnological products. The aim of the study was to demonstrate the importance of proper presentation of methods used for assessment of biological (specific) activity of biotechnological products and familiarise specialists engaged in elaboration of product specification files with the principles of presenting data in the «Biological (specific) safety» section. The analysis of documentation helped summarise the most common mistakes and omissions, formulate general recommendations concerning the description of methods, develop a general structure of the «Biological (specific) safety» section with detailed guidance on what to include in each of the subsections. Rationalisation of information presented in this part of the product specification files will help reduce the number of expert body’s requests for additional information/documents and will help ensure that laboratory testing is performed at a high professional level and within a prescribed period of time.