YTYoko Takeo

Yoko Takeo

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Yoko Takeo has a total of 74 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Femtosecond hyperspectral imaging with single-shot X-ray pulse

    by Yoko Takeo, Satoru Egawa, Noboru Furuya, Kyota Yoshinaga, Kai Sakurai, Yu Nakata, Shigeki Owada, Takashi Tanaka, Hidekazu Mimura, Makina Yabashi, et al.

    Single-shot hyperspectral imaging was demonstrated in the soft X-ray region by combining a multi-aperture grating (MAG) with Wolter-mirror microscopy. The MAG simultaneously segments the magnified image into 417 spatial channels and disperses each channel onto a two-dimensional detector. This system functions as a dispersive spectrometer with two-dimensional spatial sampling, obtaining absorption spectra at each point of the magnified image in a single pulse. At SACLA BL1, a field of view of 39µm×39µm was obtained, and a spatial sampling of 2.4µm(H)×1.6µm(V), defined by the MAG aperture pitch, was achieved. A grating-limited spectral resolving power of E/ΔE≈10 3 around 100 eV was theoretically estimated, limited by the grating line count per aperture. The system is applied to shot-to-shot measurements of the spatially resolved beam spectrum and to single-shot spectro-microscopy of a silicon nitride thin film near its absorption edge. These results establish a route to chemical-state-sensitive imaging of heterogeneous and potentially non-repeatable samples.

  • Quantitative elemental masses of a single marine phytoplankton evaluated with soft X-ray spectro-ptychography

    by Jordan T. O’NEal, Satoshi Matsuyama, Kai Sakurai, Kyota Yoshinaga, Yu Nakata, Chiho Funaki, Yoko Takeo, Takenori Shimamura, Makina Yabashi, Haruhiko Ohashi, et al.

    We demonstrate quantitative, high-resolution imaging of oxygen and iron in a single centric diatom, Thalassiosira weissflogii , using soft X-ray spectro-ptychography (SP), capable of elemental mapping. The quantitative accuracy of SP is tested by measuring the oxygen mass of SiO 2 microspheres. SP is then directly compared to scanning X-ray fluorescence microscopy by measuring the iron mass within the same T. weissflogii cell, demonstrating consistent distributions with similar spatial resolution. The oxygen mass measurement of the T. weissflogii cell shows significantly higher resolution compared with iron due to the large edge jump ratio, showing the potential for quantitative measurements of the mass of light elements, carbon, nitrogen, and oxygen, in a single cell.

  • How 100-pm figure errors in x-ray mirrors affect the image of 100-keV undulator radiation

    by Satsuki Shimizu, Hirokatsu Yumoto, Takahisa Koyama, Yasunori Senba, Yoko Takeo, Takashi Tanaka, Hiroshi Yamazaki, Haruhiko Ohashi

    Double multilayer monochromators for high-flux, high-energy x-ray imaging have been developed at SPring-8. Although state-of-the-art mirrors are fabricated with root-mean-square (RMS) figure errors of 100 pm, they still introduce horizontal stripes in beam images. Suppressing these stripes remains a significant challenge, as it requires controlling figure errors to levels well beyond current fabrication capabilities. To evaluate the impact of such errors on high-energy x-ray beams, given the partially coherent nature of the 100 keV pink beam, we performed coherent mode decomposition to represent realistic radiation fields. Wave field propagation was computed using the angular spectrum method, which is computationally efficient. The simulation results were in agreement with the measured beam image in terms of beam size and intensity variation. Further simulations using modulated spatial spectra of figure errors demonstrated that suppressing mid-spatial-frequency components (2–50 mm) to below 10 pm RMS reduced the intensity variation to 1%.


  • Open Access

    Chemical-state imaging of a mammalian cell through multi-elemental soft x-ray spectro-ptychography

    by Kai Sakurai, Yoko Takeo, Shunki Takaramoto, Noboru Furuya, Kyota Yoshinaga, Takenori Shimamura, Jordan T. O'NEal, Yu Nakata, Satoru Egawa, Kazuyoshi Yoshimi, et al.

    Soft x-ray spectro-ptychography is a high-resolution chemical state imaging technique and has significant potential for the analysis of light-element-rich samples such as biological cells. We measured hyperspectral images of a whole mammalian neuronal cell at the nitrogen and oxygen absorption edges with soft x rays using the achromatic ptychography system CARROT developed at SPring-8 BL07LSU. We visualized and classified the intracellular structures based on the difference of chemical states, which are difficult to recognize in a monochromatic image. The method is expected to give insight into the relationship between intracellular structures and chemical states.


  • Observation of mammalian living cells with femtosecond single pulse illumination generated by a soft X-ray free electron laser

    by Satoru Egawa, Kai Sakurai, Yoko Takeo, Kyota Yoshinaga, Masashi Takei, Shigeki Owada, Gota Yamaguchi, Shunya Yokomae, Hidekazu Mimura, Yutaka Yamagata, et al.

    Soft X-ray transmission microscopy is a powerful tool for visualizing cellular structures due to the natural contrast between organic material and water, but radiation damage has hindered its application to living cells. We have developed a soft X-ray microscope using femtosecond pulse illumination generated by a soft X-ray free electron laser, with which structural change of cells caused by radiation damage is negligible. Employing Wolter mirrors for illumination and objective optics allowed us to perform soft X-ray imaging with a large field of view, enabling observation of mammalian cells. We successfully captured images of living cells in a culture medium visualizing their carbon distribution. The broad wavelength-tunability of soft X-ray free electron lasers, in conjunction with the achromaticity of Wolter mirrors, enabled wavelength resolved cellular imaging.


  • Sub-photon accuracy noise reduction of a single shot coherent diffraction pattern with an atomic model trained autoencoder

    by Takuto Ishikawa, Yoko Takeo, Kai Sakurai, Kyota Yoshinaga, Noboru Furuya, Yuichi Inubushi, Kensuke Tono, Yasumasa Joti, Makina Yabashi, Takashi Kimura, et al.

    Single-shot imaging with femtosecond X-ray lasers is a powerful measurement technique that can achieve both high spatial and temporal resolution. However, its accuracy has been severely limited by the difficulty of applying conventional noise-reduction processing. This study uses deep learning to validate noise reduction techniques, with autoencoders serving as the learning model. Focusing on the diffraction patterns of nanoparticles, we simulated a large dataset treating the nanoparticles as composed of many independent atoms. Three neural network architectures are investigated: neural network, convolutional neural network and U-net, with U-net showing superior performance in noise reduction and subphoton reproduction. We also extended our models to apply to diffraction patterns of particle shapes different from those in the simulated data. We then applied the U-net model to a coherent diffractive imaging study, wherein a nanoparticle in a microfluidic device is exposed to a single X-ray free-electron laser pulse. After noise reduction, the reconstructed nanoparticle image improved significantly even though the nanoparticle shape was different from the training data, highlighting the importance of transfer learning.


  • Open Access

    Publisher Correction: Ultracompact mirror device for forming 20-nm achromatic soft-X-ray focus toward multimodal and multicolor nanoanalyses

    by Takenori Shimamura, Yoko Takeo, Fumika Moriya, Takashi Kimura, Mari Shimura, Yasunori Senba, Hikaru Kishimoto, Haruhiko Ohashi, Kenta Shimba, Yasuhiko Jimbo, et al.

  • Open Access

    Ultracompact mirror device for forming 20-nm achromatic soft-X-ray focus toward multimodal and multicolor nanoanalyses

    by Takenori Shimamura, Yoko Takeo, Fumika Moriya, Takashi Kimura, Mari Shimura, Yasunori Senba, Hikaru Kishimoto, Haruhiko Ohashi, Kenta Shimba, Yasuhiko Jimbo, et al.

    Nanoscale soft-X-ray microscopy is a powerful analysis tool in biological, chemical, and physical sciences. To enhance its probe sensitivity and leverage multimodal soft-X-ray microscopy, precise achromatic focusing devices, which are challenging to fabricate, are essential. Here, we develop an ultracompact Kirkpatrick-Baez (ucKB) mirror, which is ideal for the high-performance nanofocusing of broadband-energy X-rays. We apply our advanced fabrication techniques and short-focal-length strategy to realize diffraction-limited focusing over the entire soft-X-ray range. We achieve a focus size of 20.4 nm at 2 keV, which represents a significant improvement in achromatic soft-X-ray focusing. The ucKB mirror extends soft-X-ray fluorescence microscopy by producing a bicolor nanoprobe with a 1- or 2-keV photon energy. We propose a subcellular chemical mapping method that allows a comprehensive analysis of specimen morphology and the distribution of light elements and metal elements. ucKB mirrors will improve soft-X-ray nanoanalyses by facilitating photon-hungry, multimodal, and polychromatic methods, even with table-top X-ray sources.


  • Fabrication of ultrashort sub-meter-radius x-ray mirrors using dynamic stencil deposition with figure correction

    by Takenori Shimamura, Yoko Takeo, Takashi Kimura, François Perrin, Amparo Vivo, Yasunori Senba, Hikaru Kishimoto, Haruhiko Ohashi, Hidekazu Mimura

    This paper presents nanometer-scale production and metrology methods for elliptic-cylindrical x-ray mirrors with an unprecedentedly small tangential radius of curvature of 160 mm. Sub-millimeter-scale figure correction is conducted based on dynamic stencil deposition. The deposition flux through one or two shadow masks is examined by a comparison to a simple model. The masked deposition flux distribution is improved, leading to film thickness profiles that are 50 times sharper in terms of aspect ratio than those obtained using existing differential deposition approaches. Surface roughness deterioration is also effectively suppressed. A 2-mm-long 160-mm-radius mirror is produced with a width of 10 mm and measured using simple interferometry. The results are confirmed by conventional mirror metrology, contact profilometry, and x-ray ptychography. The x-ray focusing profile is diffraction-limited with a 142-nm focus size at a photon energy of 300 eV. The proposed methods have the potential to enhance the ultraprecise fabrication of highly curved mirrors, thus benefiting nanoscale photon-hungry x-ray techniques.


  • Abrasive slurry jet machining system using polyurethane@silica core–shell particles for internal surfaces of axisymmetric x-ray mirrors

    by Shunya Yokomae, Yoko Takeo, Takenori Shimamura, Yasunori Senba, Hikaru Kishimoto, Haruhiko Ohashi, Hidekazu Mimura

    Abrasive machining has been used for inner surface processing of various hollow components. In this study, we applied an in-air fluid jet as a precision machining method for the inner surface of an axisymmetric x-ray mirror whose inner diameter was less than 10 mm. We employed an abrasive with a [email protected] core–shell structure, which has a low density of about 1.2 g/cm3 and a relatively large particle size of about 15 µm. By using this abrasive, a practical removal rate and a smooth machined surface were simultaneously obtained. We performed figure corrections for an axisymmetric mirror and improved the circumferential figure accuracy to a sub-10 nm root mean square level. To evaluate the machining performance in the longitudinal direction of the ellipsoidal surface, we also performed periodic figure fabrication on the inner surface of a 114 mm-long nickel ellipsoidal mirror. X-ray ptychography, an optical phase retrieval method, was also employed as a three-dimensional figure measurement technique of the mirror. The wavefield of the x-ray beam focused by the processed ellipsoidal mirror was observed with the ptychographic system at SPring-8, a synchrotron radiation facility. The retrieval calculations for the wavefront error confirmed that a sinusoidal waveform with a period of 12 mm was fabricated on the mirror surface. These experimental results suggest that a nanoscale figure fabrication cycle for the inner surface consisting of jet machining and wavefront measurement has been successfully constructed. We expect this technique to be utilized in the fabrication of error-free optical mirrors and various parts having hollow shapes.