HHHaiqi He

Haiqi He

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Haiqi He has a total of 22 co-authors. Here are the top co-authors by number of shared publications:

  • Rui Li

    School of Highway, Chang’an University, Middle Section of South Erhuan Road, Xi’an 710064, China

    5 shared publications
  • Jianzhong Pei

    Key Laboratory for Special Area Highway Engineering of Ministry of Education, Chang’an University, Xi’an 710064, China

    3 shared publications
  • Donliang Hu

    School of Highway, Chang’an University, Middle Section of South Erhuan Road, Xi’an 710064, China

    2 shared publications
  • Fucheng Guo

    Gansu Industry Technology Center of Transportation Construction Materials Research and Application, Lanzhou Jiaotong University, Lanzhou 730070, China

    2 shared publications
  • Liting Yu

    School of Traffic and Transportation Engineering, Xinjiang University, Boda Campus of Xinjiang University No. 777 Huarui Road, Shuimogou District, Urumqi 830017, China

    2 shared publications
  • Yi Wu

    Key Laboratory for Special Area Highway Engineering of Ministry of Education, Chang’an University, Xi’an 710064, China

    2 shared publications

Latest Publications

  • Open Access

    Impact of Macrotexture and Microtexture on the Skid Resistance of Asphalt Pavement Using Three-Dimensional (3D) Reconstruction and Printing Technology

    by Fucheng Guo, Jiupeng Zhang, Jianzhong Pei, Haiqi He, Tengfei Yao, Di Wang

    In this study, the feasibility of using three-dimensional (3D) printing technology to investigate the impact of macrotexture and microtexture on the skid resistance of asphalt pavement was verified. The macrotexture characteristics of the five types of real asphalt mixtures were captured, reconstructed, and printed. The comparison analysis of the skid resistance between the pavement and printed specimens was conducted, and the correlations and contribution proportions of the macrotexture and microtexture on skid resistance were also calculated. Results show that five printed asphalt mixtures present good consistency in the microtexture with a roughness of about 100 nm. The impact of thin water film on the skid resistance is insignificant for real asphalt mixtures, while it is significant for printed mixtures. The printed specimens under dry conditions show a similar British pendulum number (BPN) with the real pavement specimens under wet conditions, while the BPN under wet conditions for printed specimens are much smaller than the real ones but follows a similar variation trend. Mean profile depth (MPD) values of four printed asphalt concrete (AC) mixtures are well linearly correlated with their BPN under dry and wet conditions, especially for wet conditions with the R2 of 0.91. The contribution proportion of macrotexture to the skid resistance is nearly 90% for the dry condition and about 50% for the wet condition.


  • Open Access

    Study on the Effect of Crack Density and Micro-Cracking Block Size of In Situ Softening Semi-Rigid Base

    by Liting Yu, Chunyang Yu, Haiqi He, Zikai Xu, Donliang Hu, Rui Li, Jianzhong Pei

    Reflection cracking in semi-rigid bases is a widespread distress that undermines highway safety. Priority should be given to this issue to ensure the normal performance of large-scale semi-rigid base asphalt pavements that have reached the end of their service life. At present, scholars have deeply studied and applied the theory of pavement surface layer fracture damage. However, the study of semi-rigid bases only focuses on pavement temperature influence, crack prediction, and reflection crack retardation, and there is a lack of further research on crack-related characteristics. Building on the novel concept of in situ softening for semi-rigid bases, we employ finite element analysis to quantify how transverse crack density affects overall stiffness and derive targeted softening strategies accordingly. By establishing the base micro-cracking treatment cracking block-size influence model, this study analyzes the load-bearing characteristics of cracking blocks of different sizes and recommends optimal block dimensions. This study provides practical guidance for the treatment of semi-rigid bases with maximum efficiency by expanding the application of fracture mechanics at the microscale and providing practical guidance for the high-value rehabilitation of semi-rigid bases.


  • Open Access

    Research on the Stress Characteristics of Reuse of Semi-Rigid Base

    by Liting Yu, Dong Tang, Haoyi Kang, Haiqi He, Donliang Hu, Rui Li, Jianzhong Pei, Shihui Cheng

    Semi-rigid bases are widely used in road construction due to their excellent properties, high rigidity, and frost resistance, and they have been in service for many years. However, as the service life increases, the maintenance demands also grow, with traditional maintenance methods still being the primary approach. Based on a typical case using ground-penetrating radar (GPR) technology, this study explores the issue of cracks in semi-rigid bases and their impact on overlay layers. The findings indicate that the overlay layer at semi-rigid base cracks struggles to withstand significant tensile and shear stresses, leading to reflective cracking and reducing pavement durability. To address this problem, this paper investigates the application potential of crushing technology in maintaining semi-rigid bases. Crushing technology has been widely employed in the maintenance of cement concrete panels, effectively eliminating reflective cracks and extending the service life of overlays. Given that semi-rigid bases share similar high-strength characteristics with cement concrete panels, crushing technology shows considerable applicability in semi-rigid base maintenance. This study employs a finite element analysis method to establish a semi-rigid base model under the impact load of multi-hammer equipment. It examines its dynamic mechanical response and evaluates the feasibility and effectiveness of crushing technology for semi-rigid base maintenance. Additionally, this study investigates the influence of the crushed layer’s modulus and thickness on key mechanical design indicators of the overlay and proposes recommendations for optimal design parameters. The research results provide valuable references for the design of the thickness and modulus in maintaining and repairing semi-rigid bases, contributing to improving pavement performance and durability.


  • Open Access

    Study on the Reflective Principle and Long-Term Skid Resistance of a Sustainable Hydrophobic Hot-Melt Marking Paint

    by Jun Chen, Rui Li, Yang Zhang, Yi Wu, Haiqi He

    Road marking is very important for driving safety and reducing the accident rate as a basic component of highway construction. However, traditional road marking paints are prone to be worn after short-term application and have poor durability and reflective performance. To address these problems, the marking paint was modified using the organic polymer material polytetrafluoroethylene to create a durable hydrophobic hot-melt marking paint. The factors affecting the reflective performance of marking lines are analyzed, and artificial accelerated abrasion tests were carried out to analyze the skid resistance and marking retroreflection coefficient of hydrophobic coatings. Results show that the texture of the glass beads and the quality of the coating plays a major role in the reflective performance of the marking line. The friction coefficient value of the modified marking paint is 4.62% higher than that of the traditional hot-melt marking paint. The retroreflection performance of the marking paint with 4% hydrophobic material is 8.45% higher than the initial value of the retroreflection coefficient of the traditional hot-melt marking paints. This sustainable hydrophobic hot-melt marking paint is safer and more durable than traditional pavement marking paints, which may save follow-up maintenance resources and cost from the sustainable aspect.


  • Open Access

    Evaluation of the Effect of Fiber Type, Length, and Content on Asphalt Properties and Asphalt Mixture Performance

    by Fucheng Guo, Rui Li, Shuhua Lu, Yanqiu Bi, Haiqi He

    Fiber-reinforced asphalt mixture has been widely used in pavement engineering to not only prevent asphalt binder leakage but also improve engineering properties of asphalt mixture. However, the research on three key parameters, namely fiber type, fiber length, and fiber content, which significantly affect the performance of fiber-reinforced asphalt mixture, have seldom been conducted systematically. To determine these three key parameters in the support of the application of fibers in mixture scientifically, three commonly used fibers were selected, basalt fiber, polyester fiber, and lignin fiber, and the testing on fibers, fiber-reinforced asphalt binders, and fiber-reinforced asphalt mixtures was conducted afterwards. The results showed: the favorable fiber type was basalt fiber; the favorable basalt fiber length was 6mm; the engineering properties including high temperature stability, low temperature crack resistance, and water susceptibility were clearly improved by the added basalt fiber, and the optimum basalt fiber content was 0.4 wt.%. The obtained results may be valuable from a practical point of view to engineers and practitioners.