Yolanda Reyes-Vidal
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Yolanda Reyes-Vidal has a total of 81 co-authors. Here are the top co-authors by number of shared publications:
- Fabricio Espejel-Ayala
Centro de Investigación y Desarrollo Tecnológico en Electroquímica, Parque Tecnológico Querétaro s/n. 2 , Pedro Escobedo, Querétaro 76703
7 shared publications - Francisco Javier Bacame-Valenzuela
Centro de Investigación y Desarrollo Tecnológico en Electroquímica SC: Centro de Investigacion y Desarrollo Tecnologico en Electroquimica SC
5 shared publications - Liliana Reynoso-Cuevas
Secihti, Centro de Investigación en Materiales Avanzados, S.C., Calle CIMAV 110, Ejido Arroyo Seco, Durango 34147, Mexico
3 shared publications - Luis Ortiz-Frade
Centro de Investigación y Desarrollo Tecnológico en Electroquímica (CIDETEQ), Parque Tecnológico Quéretaro s/n, Sanfandila, Pedro Escobedo C.P. 76703, Mexico
3 shared publications - Ştefan Ţălu
The Directorate of Research, Development and Innovation Management (DMCDI), The Technical University of Cluj-Napoca, Cluj-Napoca, Romania
3 shared publications - Alexis Rubén Bracamontes-Ruelas
Departamento de Ingeniería Sustentable, Centro de Investigación en Materiales Avanzados, S.C., Calle CIMAV 110, Ejido Arroyo Seco, Durango 34147, Mexico
2 shared publications
Latest Publications
- 15 September 2026
- Published by Wiley in Environmental Progress & Sustainable Energy
Natural clinoptilolite zeolite for the removal of ciprofloxacin and caffeine
In this study, the adsorption performance of natural zeolite (NZ) for ciprofloxacin (CIP) and caffeine (CAF) removal from aqueous solutions was evaluated through batch, stability, binary‐mixture, and fixed‐bed experiments. The physicochemical characteristics of NZ were investigated by X‐ray diffraction, Fourier‐transform infrared spectroscopy, and scanning electron microscopy coupled with energy‐dispersive X‐ray spectroscopy. The characterization confirmed clinoptilolite as the main zeolitic phase, together with quartz, dolomite, and calcite as accessory mineral phases. Batch experiments yielded equilibrium adsorption capacities of 0.2536 mg/g for CIP and 0.1776 mg/g for CAF under the evaluated conditions. The adsorption kinetics of both contaminants were accurately described by the pseudo‐second‐order model, with excellent agreement between experimental and calculated equilibrium capacities ( R 2 = 0.9994 for CIP and 0.9996 for CAF). Among the equilibrium models evaluated, Temkin provided the best overall fit for both contaminants, suggesting heterogeneous adsorption sites and coverage‐dependent adsorption energies. Intraparticle diffusion analysis indicated that pore diffusion was not the sole rate‐controlling step. Stability experiments showed that NZ maintained its adsorption performance under the evaluated conditions. A preliminary binary‐mixture experiment resulted in adsorption behavior comparable to that observed for the individual contaminants, suggesting no pronounced difference in their adsorption under the tested conditions. Fixed‐bed experiments conducted at low and high influent concentrations demonstrated the applicability of NZ under continuous‐flow conditions. These findings indicate that unmodified natural zeolite exhibits measurable adsorption toward CIP and CAF and can serve as a low‐cost material for preliminary water‐treatment applications. However, the relatively low removal efficiencies highlight the need for further optimization of operating conditions, adsorbent dose, contact time, and fixed‐bed configuration before practical application.
- 15 September 2026
- Published by Wiley in Environmental Progress & Sustainable Energy
Natural clinoptilolite zeolite for the removal of ciprofloxacin and caffeine
In this study, the adsorption performance of natural zeolite (NZ) for ciprofloxacin (CIP) and caffeine (CAF) removal from aqueous solutions was evaluated through batch, stability, binary‐mixture, and fixed‐bed experiments. The physicochemical characteristics of NZ were investigated by X‐ray diffraction, Fourier‐transform infrared spectroscopy, and scanning electron microscopy coupled with energy‐dispersive X‐ray spectroscopy. The characterization confirmed clinoptilolite as the main zeolitic phase, together with quartz, dolomite, and calcite as accessory mineral phases. Batch experiments yielded equilibrium adsorption capacities of 0.2536 mg/g for CIP and 0.1776 mg/g for CAF under the evaluated conditions. The adsorption kinetics of both contaminants were accurately described by the pseudo‐second‐order model, with excellent agreement between experimental and calculated equilibrium capacities ( R 2 = 0.9994 for CIP and 0.9996 for CAF). Among the equilibrium models evaluated, Temkin provided the best overall fit for both contaminants, suggesting heterogeneous adsorption sites and coverage‐dependent adsorption energies. Intraparticle diffusion analysis indicated that pore diffusion was not the sole rate‐controlling step. Stability experiments showed that NZ maintained its adsorption performance under the evaluated conditions. A preliminary binary‐mixture experiment resulted in adsorption behavior comparable to that observed for the individual contaminants, suggesting no pronounced difference in their adsorption under the tested conditions. Fixed‐bed experiments conducted at low and high influent concentrations demonstrated the applicability of NZ under continuous‐flow conditions. These findings indicate that unmodified natural zeolite exhibits measurable adsorption toward CIP and CAF and can serve as a low‐cost material for preliminary water‐treatment applications. However, the relatively low removal efficiencies highlight the need for further optimization of operating conditions, adsorbent dose, contact time, and fixed‐bed configuration before practical application.
- 10 July 2025
- Published by Springer Nature in International Microbiology
- Vol. 28 (8) , 2327-2341
Bioelectrochemical application of an F. uniseptata pigment in a microbial fuel cell for electricity generation
In this work, the isolation and identification of pigment-producing fungi from substrate samples collected in the Sonoran Desert, Mexico, are described. Three fungal isolates, named CR2, SM1, and GBS, were selected for their ability to produce colored pigments. The redox properties of these pigments were characterized using UV–Vis spectroscopy and cyclic voltammetry. The GBS pigment, produced by the fungus Forliomyces uniseptata, exhibited the best electrochemical behavior, with a reversible redox cycle, indicating its potential as a redox mediator (RM) for microbial fuel cells (MFCs). The effect of different light wavelengths on the growth kinetics of F. uniseptata and pigment production was evaluated. Blue light moderately accelerated pigment biosynthesis, while darkness promoted fungal growth. Finally, the GBS pigment was tested as a RM in a MFC inoculated with Bacillus subtilis. A maximum power density of 37 μW/cm2. It is suggested that mass transfer could limit performance. Graphical Abstract
- 10 July 2025
- Published by Springer Nature in International Microbiology
- Vol. 28 (8) , 2327-2341
Bioelectrochemical application of an F. uniseptata pigment in a microbial fuel cell for electricity generation
In this work, the isolation and identification of pigment-producing fungi from substrate samples collected in the Sonoran Desert, Mexico, are described. Three fungal isolates, named CR2, SM1, and GBS, were selected for their ability to produce colored pigments. The redox properties of these pigments were characterized using UV–Vis spectroscopy and cyclic voltammetry. The GBS pigment, produced by the fungus Forliomyces uniseptata, exhibited the best electrochemical behavior, with a reversible redox cycle, indicating its potential as a redox mediator (RM) for microbial fuel cells (MFCs). The effect of different light wavelengths on the growth kinetics of F. uniseptata and pigment production was evaluated. Blue light moderately accelerated pigment biosynthesis, while darkness promoted fungal growth. Finally, the GBS pigment was tested as a RM in a MFC inoculated with Bacillus subtilis. A maximum power density of 37 μW/cm2. It is suggested that mass transfer could limit performance. Graphical Abstract
- 23 October 2024
- Published by Springer Nature
- p. 495-516
Recovery of Raw Materials and Obtaining Functional Carbonaceous Materials from the Circular Economy of Organic Waste
- 23 October 2024
- Published by Springer Nature
- p. 495-516
Recovery of Raw Materials and Obtaining Functional Carbonaceous Materials from the Circular Economy of Organic Waste
- 7 August 2024
- Published by Elsevier in Materials Letters
- Vol. 373
Preparation of silicoaluminophosphate-34 zeolite on different macroporous supports for permeability and selectivity of CO2/CH4
- 7 August 2024
- Published by Elsevier in Materials Letters
- Vol. 373
Preparation of silicoaluminophosphate-34 zeolite on different macroporous supports for permeability and selectivity of CO2/CH4
- 15 March 2024
- Published by Springer Nature in Potato Research
- Vol. 67 (4) , 1653-1670
Effect of Using Corn Industry Wastewater as Irrigation Water in Potato Crops (Solanum tuberosum)
- 15 March 2024
- Published by Springer Nature in Potato Research
- Vol. 67 (4) , 1653-1670
Effect of Using Corn Industry Wastewater as Irrigation Water in Potato Crops (Solanum tuberosum)
- Open Access
Simultaneous Oxidation of Emerging Pollutants in Real Wastewater by the Advanced Fenton Oxidation Process
Since the conventional processes employed in most wastewater treatment plants (WWTPs) worldwide are not designed to entirely remove or oxidize emerging pollutants, which, due to their incidence and persistence, can cause damage to both the environment and human health, several options for their degradation and removal have emerged. Coupling the advanced Fenton oxidation process as a polishing or tertiary wastewater treatment alternative within conventional WWTP processes stands out among the treatment options. Therefore, the main objective of this research was to evaluate, at the laboratory level, the ability of the advanced Fenton oxidation process to oxidize triclosan, ibuprofen, DEET (N, N-diethyl-meta-toluamide), carbamazepine, caffeine, and acesulfame-K, which represent several groups of emerging pollutants in real wastewater from the second settling tank of a municipal WWTP. The compound used as a catalyst (Fe2+) supplier in the advanced Fenton oxidation process was ferrous sulfate heptahydrate (FeSO4•7H2O). The results obtained upon application showed that the advanced Fenton oxidation process could simultaneously oxidize and remove practically the total concentration of the above-mentioned emerging pollutants, except for DEET (85.21%), in conjunction with the chemical oxygen demand (COD), total suspended solids (TSS), and fecal coliforms (FC, pathogen group) in the effluent generated by the advanced Fenton oxidation process.
Open AccessSimultaneous Oxidation of Emerging Pollutants in Real Wastewater by the Advanced Fenton Oxidation Process
Since the conventional processes employed in most wastewater treatment plants (WWTPs) worldwide are not designed to entirely remove or oxidize emerging pollutants, which, due to their incidence and persistence, can cause damage to both the environment and human health, several options for their degradation and removal have emerged. Coupling the advanced Fenton oxidation process as a polishing or tertiary wastewater treatment alternative within conventional WWTP processes stands out among the treatment options. Therefore, the main objective of this research was to evaluate, at the laboratory level, the ability of the advanced Fenton oxidation process to oxidize triclosan, ibuprofen, DEET (N, N-diethyl-meta-toluamide), carbamazepine, caffeine, and acesulfame-K, which represent several groups of emerging pollutants in real wastewater from the second settling tank of a municipal WWTP. The compound used as a catalyst (Fe2+) supplier in the advanced Fenton oxidation process was ferrous sulfate heptahydrate (FeSO4•7H2O). The results obtained upon application showed that the advanced Fenton oxidation process could simultaneously oxidize and remove practically the total concentration of the above-mentioned emerging pollutants, except for DEET (85.21%), in conjunction with the chemical oxygen demand (COD), total suspended solids (TSS), and fecal coliforms (FC, pathogen group) in the effluent generated by the advanced Fenton oxidation process.
- 6 February 2023
- Published by Elsevier in Electrochimica Acta
- Vol. 445
Effect of adsorption of pyocyanin on the electron transfer rate at the interface of a glassy carbon electrode
- 6 February 2023
- Published by Elsevier in Electrochimica Acta
- Vol. 445
Effect of adsorption of pyocyanin on the electron transfer rate at the interface of a glassy carbon electrode
- 31 May 2022
- Published by Springer Nature
- p. 181-208
SAPO-34 Zeolite and Membranes for Biogas Purification
- 31 May 2022
- Published by Springer Nature
- p. 181-208
SAPO-34 Zeolite and Membranes for Biogas Purification